error 0x8024d007 cannot load the microsoft update

Similar Questions

• Cannot load the microsoft update

  .NET framework 1.1 service pak does not load

  Hi tony27,

  Try the steps and check them off below if it helps:

  1. create a new folder named DotNet in drive C:\

  2. download the Redistributable Package of Microsoft .NET Framework 1.1 (dotnetfx.exe). Make sure that the configuration file is saved as dotnetfx.exe. Download from the link below: http://www.microsoft.com/downloads/details.aspx?FamilyId=262D25E3-F589-4842-8157-034D1E7CF3A3&displaylang=en

  3. download Microsoft .NET Framework 1.1 Service Pack 1. Rename the file to dotnetfxsp1.exe. Download from the link below: http://www.microsoft.com/downloads/details.aspx?FamilyID=a8f5654f-088e-40b2-bbdb-a83353618b38&displaylang=en

  4 copy the two installation files in the same directory (i.e. C:\DotNet).

  5. open the prompt as an administrator.

  6. go to the directory where the two installation files are stored, i.e. C:\DotNet.

  7. run the following commands one by one.

  (a) c: "msiexec.exe /a netfx.msi TARGETDIR = C:\DotNet" dotnetfx.exe

  Click Yes and wait that this dialog box which says installation complete.

  (b) dotnetfxsp1.exe /Xp:C:\DotNet\netfxsp.msp

  (c) msiexec.exe /a c:\DotNet\netfx.msi /p c:\DotNet\netfxsp.msp

  Wait for the Setup program to disappear automatically.

  8. install Microsoft .net Framework 1.1 with slipstreamed Service Pack 1 by running netfx.msi from the working folder.

  Link for reference: http://social.msdn.microsoft.com/Forums/en/netfxsetup/thread/a96a09e1-eb5c-4938-b854-8004dcf9b496

   

  You can even try the steps listed in the link below and check if it solves the problem:

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  http://support.Microsoft.com/kb/923100

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Add/Remove components error and DVD driver error: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Original title: Add/Remove components error and DVD driver error

  Yesterday, I removed several components of windows to attempt to clean my cpu. After the reboot, I noticed that my DVD drive disappeared. I tried to update the driver but told me I have the most updated version, I uninstalled and reinstalled the drive, but I still get the same error. Under Driver Details, it shows that I have a lot of drivers for my Phillips DVD player. However, the status of the device is the following: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) Click Troubleshoot to start the troubleshooter for this device. I've done the troubleshooting, and the two options has not fixed the problem.

  Then I tried to add windows components that I removed, thinking maybe that was the problem. However, when I try to add them, I get an error message that says: 'Setup cannot copy the file zClientm.ex_' it shows the location of this file as being in windows/i386, and of course, the file is located in this folder. So when I go to browse to locate the file, I find and click on it to open it, but I keep getting the same error message that the file is not found and Setup cannot continue.

  I realize that this problem seems very rare and weird, but any help at all would be appreciated. Thank you.

  Hello
   
   
  Code 39: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  Explanation of error codes generated by the Device Manager in Windows XP Professional http://support.Microsoft.com/kb/310123

   

   

  Method 1.
  Microsoft Automated Troubleshooting Services scans your computer and detects that the root causes of common problems, then automatically solves the problems that he finds and offers additional resources if the problem is not resolved. Click run now in the article below.

  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

   

   

  Method 2.
  Also, try the methods listed in the section below and check.
  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/982116

   

   

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My TSSTcorp DVD +-RW TS - L632D does not work, error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  And it displays the following message: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) ». I tried all the tricks troubleshooting to no effect. I uninstalled and reinstalled and look for the updates to install. What should I try next?

  http://support.Microsoft.com/kb/314060

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

• Connection error: windows cannot load the locally stored profile

  original title: connection error

  Always get following message when trying to connect to my desktop PC

  Windows cannot load the locally stored profile. Possible causes of this error include insufficient security rights or a damaged local profile. If this problem persists, contact your network administrator.

  This looks like a corrupted profile.  Assuming that you can connect with a user with administrator privileges, do one of the following procedures to restore your profile in the shape.  If you are unable to connect, try to connect by using the built-in Administrator account (Ctrl-Alt-Delete struck twice on the login screen, enter the user: administrator, leave blank password unless you have changed at some point)

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >
  (works best if you connect with Safe Mode)

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

  PS: Alteration of the disc often accompanies this problem.  Don't forget to run a "chkdsk" operation after you recover.

• Error "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Original title: Audio recording sound recording microphone

  Hey, if I get this message:

  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

  {Unable to load device driver}
  HS device driver could not be loaded.
  Error status is 0 x %x

  When I check the status of my driver, I "updated", but he said I had the latest update installed, and when I clicked on the option for the computer solve the problem itself, after he discovered what was wrong, said, that it has not been yet fixed... I have a HP ENVY m6. Any ideas on what to do? Oh and I did a 'tune up' just a little bit before, but just the usual things nothing big or diff

  There are several models of m6 ENVY

  ENVY m6 -?

  This is a link to the audio driver for HP ENVY m6 - 1188ca (it can work also on other HP computers or not)
  This is a link to the HP support site to download drivers

  And this is something common for "tuneup", "speed up my computer", "registry cleaner" software to cause problems

  Looks like something to remove the registry entries for the driver

• ERROR: DW071: ERROR: DW003: third payload Installer vcredist_x64.exe failed with exit code: ERROR-2147024546: cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). I would be grateful if someone could help me.

  I get the following errors when I am trying to download a test version of Dw;

  ERROR: DW071:

  ERROR: DW003: third payload Installer vcredist_x64.exe failed with exit code:-2147024546

  ERROR: Cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64).

  Chat is closed. I would be grateful if someone in the community could help me.

  Take a look at this answer Re: third payload Installer vcredist_x64.exe failed with exit code: 2147942750

• error message "cannot load the main class.

  I ran windows update yesterday and installed the recommended updates, restarted my laptop today the error message "Unable to load the main class" appears in a box and I couldn't do anything until I had closed this box, after the loading of firefox it displays a message not responding, then a bar indicating that plugin adobe did not start successfully so I clicked to reload page Then, I rebooted my laptop to see if this solves the problem, but the same error message appeared and firefox have responded in the same way, someone has an idea how I can fix this problem?  I run anti-virus software and malware from comodo and my OS is windows vista 32. I also downloaded an update for adobe flash yesterday but the problem has not produced until after I had done the updates of windows.  Thank you

  Hello Fiona,

  Thank you for your response.

  You are facing this problem might because of Java program on your computer.

  I suggest you perform the clean boot and check the status of the issue, which will help you identify the problem.

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8.

  http://support.Microsoft.com/kb/929135

  Note: please go through the section:How to reset the computer to start as usual after a clean boot troubleshooting section of Kb to start the computer to a normal startup after you fix the problem.

  Hope his helps.

• Cannot access the Microsoft Update Site

  I get the following error message when you try to access the update site:

  Microsoft Update could not be installed on your computer
  

  Make sure that you log on as an administrator or as a member of the Administrators group, and then try again.

  More troubleshooting options

  • If your computer is connected to a network and the problem persists, contact your system administrator to see if your Microsoft Update settings are managed by using Group Policy.
  • If your computer is not connected to a network, or if your system administrator has not disabled Microsoft Update, check if the Windows Update service is disabled or stopped. For information about how to start a service, search help and Support on your computer.

  Note: If you encounter problems with the installation of Microsoft Update, you can continue to get updates for your computer by going to Windows Update in control Panel.

  [Error number: 0x800A01AE]

  I AM logged on as administrator (it's actually the only account on the system other than the guest account: I have renamed the main administrator account and use it as my account {I know this isn't the best practice, but I always did like it and it makes things easier being the administrator, especially since I changed the name for security reasons}).  I have a small home network wireless, but have no defined group policy (no server - just-to-peer).  The Windows Update Service is launched and running (but I stopped and restarted it just to be safe).

  I don't quite know what to do next.  I would like to be able to access this site for updates that cancelled or failed during the update process automatic (and who seem not to be re - that appear as options when I check the updates).

  Any help you can give would be greatly appreciated...

  BTW, I use a Dell Inspiron E1705 with 32-bit Windows Vista Business SP2.

  Thank you!
  Lorien - a - MCSE/MCSA/network + / A +.

  Hello

  You try to go actually on here Windows Updates site?

  http://www.update.Microsoft.com/microsoftupdate/v6/default.aspx?ln=en-us

  This site does not work for Vista. You must use the Windows built-in to Vista updates or download them
  sites I posted for you last time.

  Absolutely do not use the default Administrator account. Just make a new Admin account to
  use and leave the other to test and difficulty. In fact, make an Admin NOW account to use to test and fix
  According to the needs. If your sole administrator corrupts you will have a big headache.

  -------------------------------------

  Run the Windows updates to reset and

  Do the two of them:

  How to reset the Windows Update components? a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system update for Windows Vista, for Windows Server 2008 analytical tool, for
  Windows Server 2008 R2 Release Candidate for Windows 7 Release candidate
  http://support.Microsoft.com/kb/947821

  ------------------------------------

  If you have issues with your updates, please describe what you see and all the error codes or the KB/QB
  problem updates.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• In the air of my ipad 2, ios 9.2.1 is not download. An error saying cannot check the software update is coming

  My current operating system ios 9.1, the latest operating system (ios 9.2) is not upgraded. A mistake is to come indicating that, "unable to verify the software update. I tried to update during the loading of the ipad, but no result. Please help me.

  HAbe you never synced to a computer?  You are able to update via iTunes on your computer? If so, try this way. Sometimes, it has fewer problems than to try to live update

• Satellite Pro 4600 cannot load the BIOS update

  Satellite Pro 4600. When starting I access Windows 2000 screen and then get the blue screen "The ACPI BIOS in this system is not fully compatible with ACPI." Please contact etc etc for BIOS updated. I downloaded version of update of the BIOS 2.60 since the Toshiba site and installed with a message "installed successfully". I always get the "bluescreen". Where I'm going wrong? Help would be appreciated.

  Y at - it the ability to boot the operating system in safe mode? It works correctly?

  Did you have a new installation Win2000?
  Give us more information.

• Cannot access the Microsoft Updates Web pages

  using XP Home Edition on a laptop. Victim of a crisis (virus/trojan/worm - don't know what) in the new year, she launched the system restore and all of the restored data.  Downloaded AVG to analyse the system, checked MS Security Center and I saw it worked not - says, he had been arrested.  Much research for corrections, tried several of them, including uninstall AVG and other scanners, antivirus, installation SP 3 and MS Security Essentials and all other MS security downloads I could find.  Still no access pages of MS update, always "THIS webpage IS NOT AVAILABLE".  Also downloaded mpam - fe.exe and MPAs - fe.exe but does not - get access denied when select current to run user.  How can I get updates MS if I can't access Web pages?  I don't know what updates I've missed.

  Mosty likely, the computer can be infected by ROOTKITS.

  Try TDSSKILLER to find rootkits.

  Download and run from here

  http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe>

• Error message "cannot load the acrobat core DLL.

  Win 7 with Norton antivirus.  I tried to correct and remove all Adobe programs. Have reloaded Adobe reader v11.0.02.  Keep getting the same error message.  Have enough old version 10.1.6.  Keep getting the same error message.  Any suggestions?

  Please visit the Doc KB:http://helpx.adobe.com/acrobat/kb/reader-core-dll-error.html

• When you try to download the trial version of Photoshop I got these errors: ERROR: third payload Installer vcredist_x86.exe failed with exit code: ERROR-2147024546: cannot install the Microsoft Visual C++ 2012 Redistributable (x 86).

  Why this is happening and what to do about this.

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium