Error 1053 of the print spooler for HP Officejet 6500 a Plus All in One printer

Similar Questions

• Pages come out White HP Officejet 6500 has e-all-in-one printer.

  I have a HP Officejet 6500 a e-all-in-one printer (product # CN555A), and I had problems printing for a while.   I'm working on Windows 8, although the same problem occurs with a Windows 7 laptop that I use sometimes.
  Printer goes through all the movement of printing and pages come out sometimes very thirsty or Virgin (illegible). At the beginning, once in a while it would happen, and once the printer is rested for a few days, it works again. Now it happens all the time and I can't print.  I did ALL the steps of troubleshooting hp and nothing works.   A few days ago, I managed to have it print a little darker, but it mainly printed in gray-greenish, but after the second page, he just disappeared again to nothing.  I think it may be something on the channels contained in the cartridges of ink to the page or something like that.  Can someone help me understand this and the difficulty of my printer?

  Thank you
  )

  Considering that the yellow is almost full and is printing very well, there is actually a small chance that the low level of ink you see (approx. 25%) this is dried up in the cartridge itself.  Think of the ink as a former condiment that has been in your refrigerator for a long time.  When there are more things in the container, it is less likely to dry up, but when you have only a little inside, the air-to-ink ratio increases the chances of this being actually what caused this.

  Although it is cheaper to do the printhead of soaking, it's also much more risky than buying the new ink first.  I highly recommend making sure that you have replaced the low ink cartridges before trying the latest possible stage.

  Certainly, it is probably due to cleanups of printhead, print tests and other basic troubleshooting steps that caused you to be low on ink in the first place.  Maybe double check on the return policy of the store about the ink you buy maybe not a bad idea, either in case you do not buy, does not print, you are soaking the print head and then it also fails.

  Better to be prepared for the worst but hoped that the simplest solution is the best one (Occam's razor) is what I mean by all this.  Keep me posted on what you decide to do.  * fingers crossed *.

• Unable to get double printing to work. new HP Officejet 6500 has e-all-in-one.

  Impossible to get double print to work after you have installed the duplexer to my new HP Officejet 6500 has e-all-in-one.  I can't find where I can change to double-sided printing in the soft ware.

  ShlomiL wrote:

  This is false,

  You should contact the dept store as was provided with misleading information.

  Below you find the accessories compatible with the Officejet 6500 a.

  As you can find in the list, the duplex accessory is suitable only for HP Officejet 6500 a more e - AiO - E710n:

  http://support.HP.com/us-en/document/c02492482

  Kind regards

  Shlomi

  Thank you very much

  Ron

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• How to fix: Error 1053 of the print spooler

  Are you an error when you try to restart the print spooler?  Do you have your printer spooler error and now, do not restart?

  You saw "error 1053: the service did not demand launch or control in a timely.?

  There is a page of Microsoft support with information about this error, which can be found here.

  According to Microsoft:

  • Question: The ServiceBase class calls the OnStop method directly from the Service command handler that is defined in the ScDispatcherLoop of the Advapi32.dll file. After 30 seconds, if the ScDispatcherLoop thread is not ready to receive a new order of service from service control manager, Windows brand services controller out service as 'time '. Therefore, you receive this error message.
  • Resolution: to resolve this problem, obtain the latest service pack for Microsoft .NET Framework.

  This resolution works for some, and allows the service to return to the correct functionality.  However, I want to provide workaround incase this option does not work for some.

  • Open the run command by selecting it from the start menu or by pressing the Windows key (to the left of the alt) + R
  • Type services.msc and press enter
  • Scroll down and double click on print spooler
  • Select the tab log
  • Uncheck the Allow service to interact with desktop
  • Click apply
  • Select the general tab for the print spooler, and then select start

  I have the confirmation that this workaround works for some users.  The link below will take you to a thread where this information has resolved this error a user in these forums:

  1053 error print spooler does not start thread

  Here is the video where the workaround steps, listed above, were found.  The video also gives a graphical representation of these steps for those who prefer the Visual instructions.

  I hope this helps users with error 1053 of print spooler.

• UNABLE TO COMPLETE REINSTALLATION OF THE SOFTWARE STARTER FOR HP OFFICEJET 6500 WIRELESS PRINTER-E709n

  After uninstalling printer of subject and try to reinstall using the start for printer software, I was not able to complete the installation.  After reaching step 4 on 4 set up your product 96%, the message "Fatal error during Installation" appeared. I tried the diagnosis not recommended and used the doctor printing & scanning without success.  I uninstalled and reinstalled several times.  I also tried to download the software to install it on the HP website.  I can do basic printing, but I can't scan or use HP solutions and cannot use some Quicken printing features.  I have not had any problems with the printer before you uninstall.  I uninstalled because I was experimenting with a new software of greeting.  My operating system is Windows Vista-32 bit.

  Hi there glendia,

  This article should cover the problem you are experiencing. Give the steps described under the specific error, you get a shot and let us know if it helps.

  Good luck!

• HOW TO OBTAIN THE DEVICE DRIVER FOR "HP OFFICEJET 6500 E709 SERIES PRINTER?

  MY COMPUTER WOULD LIKE TO ADVISE THAT MY PRINTER DOESN'T HAVE THE INSTALLED DEVICE DRIVER?   PHYLLIS MASON

  Hello

  As OEM HP is responsible for the good operation of the printer and their
  drivers provided. Check with HP support, their documentation online and
  drivers and ask in their forums.

  Try printing HP and Scan Doctor for Windows
  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03286146

  Good luck, you need to update or reinstall the latest driver.

  HP OfficeJet 6500 E709 - drivers<-- select="" model="" and="" then="" you="">
  Windows
  http://WWW8.HP.com/us/en/support-search.HTML?tab=1#/qryterm=OfficeJet%206500%20E709&search_searchtype=s-002

  HP 6500 E709 - Support & Troubleshooting
  http://WWW8.HP.com/us/en/support-search.HTML?tab=2#/qryterm=OfficeJet%206500%20E709&search_searchtype=s-001

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  =============================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Solve printer problems (Vista)
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Solve printer problems (Windows 7)
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Open the printer (Windows 7) Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• HP Officejet 6500 - E709n: power adapter for the HP Officejet 6500 - E709n wireless all-in-one printer

  I need a new power adapter for my HP Office 6500 - E709n.  Does it matter if I buy an adapter for a model E709a?  Will it work on the E709n?  The power adapter E709a looks identical in the photos.  Thank you.

  Hello

  In fact, they use the same adapter as shown:

  http://support.HP.com/au-en/document/c01636617

  Note: Make sure the 2 sections

  Models all in one HP Officejet 6500

  and

  Power specifications

  Kind regards.

• Address of the inserted memory card HP Officejet Pro 8600 e-all-in-one printer - N911a

  I upgraded to this printer from a 6500 more which allowed the map SD be accessible with I.e. through the address IP of "memory_card" followed by printing the full syntax in my situation was http://192.168.0.111/memory_card the problem is that does not work on the 8500, and not more than other permutations I tried as the 'memory '. , "memory card", "SD" etc. does anyone know what syntax works on the 8500 , nobody knows why it cannot be the same syntax for all? Setup and user's guide did not touch this topic on the 6500, or isn't on the 8500, and is not in the FAQ on the 8500, apparently I'm the ask only a single, and my need is not uncommon. Thank you in advance for your help. Dean

  Dean

  Hello

  I don't know when / if there has been a change or we live just the strangeness even . I couldn't go to our 8600 using the same method as you who seems to think the habit of work. Our IE has been updated, so something could have changed there but it's the method I used that worked: in IE or simply explore (if you use windows 7 don't know if works for vista or below) type: \\ipadress\memory_card . It is possible that the IP address may have changed with the new printer. Do you have the ip address or make sure it is correct?

• HP Officejet 6500 E710n-z: how to get the hardware support for HP Officejet 6500 E710n-z

  I'm probably in the wrong forum, but I'm not anywhere else to go.  Just throw it out there and I hope someone has the answer.

  My very reliable Officejet printer has lost the ability to feed paper from the paper tray.  It is that decend on top of paper rolls and are believed to feed the paper until the collection of wheels.  The rolls go down, but they don't happen, and therefore no paper feed.  I can gently push the individual sheets until the collection of wheels and printing works very well.

  Has anyone dealt with this kind of problem.  Of course, it's hardware related and I'll probably have to bring somewhere for repairs.  It's a great printer for several years and I look forward to replace themselves.

  Thank you.

  I bought a new printer because the cost to fix this little problem is higher than the purchase of a new machine.

• How to set the parameters of scanning on Officejet 6500 connected to a Mac?

  I'm trying to scan documents and pictures using the following:

  Scanner: HP Officejet 6500 E710n-z all-in-one
  Computer: Macbook Pro retina
  Operating system: OS X mount Lion
  Application: "HP Scan" (this application was provided by HP)

  Whenever I have analyze anything, it comes out in grayscale at 300 dpi resolution.  At least, this is what HP Scan tells me when I click on the "Info" button in the lower right.

  I would like to be able to scan things in color rather than just in grayscale, and I wish I could choose the resolutions other than 300PPI.  But I looked everywhere in the graphical interface of the HP scanning application, and I can't find anywhere to adjust these settings.

  Did anyone here know how to change these settings?

  Unfortunately, the link you provided is a version of the software much older than what I have currently installed.

  HP_Installer_Inkjet_Full_Group02_10.3.dmg was published on 14/09/2009, and it is intended for OS X 10.6, aka Snow Leopard.  When I installed the printer installation CD had software pretty much at this time, and he refused to install on MTN. Lion.  Instead it asked me to download the latest version from the HP website.  What is installed on my machine is a file named HP_Mountain_Lion_Ink_SW_v12.23.18.dmg.  Unfortunately, I neglected to save the URL I downloaded from, and I can't seem to find him.  But I saved a copy of the .dmg file in case I ever need to reinstall.

  Meanwhile, I managed to find the answers on my own.  Part of my problem is that, although I'm fairly familiar with Linux and Windows, I am new to the GUI of Mac and his metaphor interface and GUI desktop is different, enough of these I'm familiar with what my instincts are sometimes not a lot of help.  Then, it took me days to notice the only critical button that made all the selections, I was looking for visible.

  HP Scan DO allows you to set things like the Type of Scan (photo or Document), Mode (color, grayscale, black & white), resolution and a number of other parameters.  But we must first click on the "Scan" button... ", and then click on the widget of the arrow to the right of the selection of the Scanner.  By clicking on the arrow pointing downwards in fact all other settings appear.

  If you change the Type of Scan of photo of the Document, it automatically changes color in grayscale Mode, which does not want to create a color PDF.  But you can change the Mode back to color.  And you can save this document as a PDF searchable to call the I.R.I.S. OCR software on it.

  To create a multiple page PDF, or let the software analyzes all sheets in the document feeder, or place another page on the window and click on the button 'Add' in the lower left corner of the window, how it displays the same dialog box that is displayed when you click 'Scan '. ».  You can click on the arrow down and change the settings for each page or leave them alone and they will remain the same as the parameters of the previous page.

  When you have analysed all the pages that you want in a single document, click 'send '.  This displays the usual selection of files box.  At this point, if you set the 'Searchable PDF', or 'PDF' format a checkbox will appear marked "save all items in a single file.

  Thus, it seems that HP Scan works with MTN. Lion, it provides all the features that Capture of Image and seen I.R.I.S. integrated in it, it provides OCR features that Capture of Image is not.

• Wireless for HP OfficeJet 6500 a configuration more all-in-One on Ubuntu 10.04

  I bought a HP OfficeJet 6500 has more all-in-One CN557A, I want to use with ubuntu 10.04 64 bits as a wireless network printer.
  Before, I bought, I checked the compatibility on www.hplipopensource.org and www.openprinting.org, and everything was in order.
  The machine is detected automatically and fully functional when connected with a usb cable, but I failed to operate as a wireless printer.
  That's what I did:

  I configured the printer on the network (through the interface of the printer), and it connects. It prints a 'Wireless Network Test report', and everything works. I can ping the local ip address and access it via the browser. HP eprint also works.

  I installed hplip 3.11.10 and dependencies manually. I did this because the default hplip in ubuntu 10.04 did not recognize the device.

  I ran 'hp-check', who gave without errors or warnings:

  tjoff@MEK-403-jakbo-01: ~ $ hp-check

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Dependency/Version Check Utility worm. 14.3

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Note: hp-check can be run in three modes:
  1. check mode (-c or - compilation) compilation: use this mode before compiling the
  HPLIP provided source tarball (. tar.gz or .run) to determine if the appropriate dependencies
  are installed to compile correctly HPLIP.
  2. performance check (r or - run) mode: use this mode to determine if a distribution
  provided package (.deb, .rpm, etc.) or a supplied HPLIP tarball already built
  the appropriate dependencies installed to run successfully.
  3. the two and run-compilation mode check (b or - both) (by default): this mode
  check the two cases above (the two dependencies of compilation and execution).

  Save the output in the log file: hp - check.log

  During initialization. Please wait...

  ---------------
  | SYSTEM INFO |
  ---------------

  Base information system:
  78 - Ubuntu Linux 2.6.32 mek-403-jakbo-01-35-generic # SMP kills Sep 11 16:11:24 UTC 2011 x86_64 GNU/Linux

  Distribution:
  Ubuntu 10.04

  Checking version of Python...
  OK, installed the version 2.6.5

  Checking for version 4.x PyQt...
  OK, version 4.7.2 installed.

  Checking the CUPS...
  Status: Scheduler is running
  Version: 1.4.3
  error_log is defined at the level: warning

  Checking the dbus/python-dbus...
  dbus daemon is running.
  Python-dbus version: 0.83.0

  ------------------------------------
  | COMPILATION AND RUNTIME DEPENDENCIES.
  ------------------------------------

  Note: to check the dependencies only compilation, run hp - check with the parameter - c (IE, hp-check - c).
  Note: to check the dependencies only run time, run hp - check with the parameter-r (IE, hp-check - r).

  Dependency checking: CUPS - Common Unix Printing System...
  OK, found.

  Dependency checking: CUPS devel - development Common Unix Printing System files...
  OK, found.

  Dependency checking: CUPS image - development for the CUPS image files...
  OK, found.

  Dependency checking: DBus - Message bus system...
  OK, found.

  Dependency checking: gcc - the GNU Project C and C++ compiler...
  OK, found.

  Dependency checking: GhostScript - PostScript and PDF interpreter and preview generator...
  OK, found.

  Dependency checking: libcrypto - OpenSSL cryptographic library...
  OK, found.

  Dependency checking: libjpeg - JPEG library...
  OK, found.

  Dependency checking: libnetsnmp-devel - SNMP networking of development libraries files...
  OK, found.

  Dependency checking: libpthread - POSIX threads library...
  OK, found.

  Dependency checking: libtool - building of the library support services...
  OK, found.

  Dependency checking: libusb - Library USB...
  OK, found.

  Dependency checking: make - GNU make utility to maintain groups of programs...
  OK, found.

  Dependency checking: PIL - Python Imaging Library (mandatory for the commandline scanner with hp-scan)...
  OK, found.

  Dependency checking: PolicyKit - administrative framework...
  OK, found.

  Dependency checking: PyQt 4 DBus - Support of DBus for PyQt4.
  OK, found.

  Verification of dependency: Python-DBus - Python bindings for DBus...
  OK, found.

  Verification of dependency: Python-devel - development Python files...
  OK, found.

  Verification of dependency: Python libnotify - Python bindings for libnotify desktop notifications...
  OK, found.

  Verification of dependency: Python XML libraries...
  OK, found.

  Verification of dependency: Python 2.3 or above - for the fax function...
  OK, found.

  Verification of dependency: Python 2.2 or higher - Python programming language...
  OK, found.

  Dependency checking: Reportlab - library for Python PDF...
  OK, found.

  Dependency checking: SANE - library digitization...
  OK, found.

  Dependency checking: SANE - sweep of development libraries files...
  OK, found.

  Dependency checking: scanimage - Shell program scanning...
  OK, found.

  Dependency checking: xsane - scanner Graphical frontend for SANE...
  OK, found.

  ----------------------
  | HPLIP INSTALLATION |
  ----------------------

  HPLIP currently installed version...
  HPLIP 3.11.10 currently installed in ' / usr/share/hplip.

  Current content of ' / etc/hp/hplip.conf' file:
  # hplip.conf. From the hplip.conf.in to configure.

  [hplip]
  version = 3.11.10

  [directories]
  Home = / usr/share/hplip
  Run = / var /.
  PPD = / usr/share/ppd/HP
  ppdbase = / usr/share/ppd
  doc=/usr/share/doc/hplip-3.11.10
  icon = / usr/share/applications
  cupsbackend = / usr/lib/CUPS/backend
  cupsfilter = / usr/lib/cups/filter
  DRV = / usr/share/cups/drv/hp

  # Following values are determined to set the time and cannot be changed.
  [configure]
  network-build = yes
  pp-build = no
  GUI-build = yes
  Scanner-build = yes
  Fax-build = yes
  dbus-build = yes
  cups11-construction = no
  doc-build = yes
  shadow-build = no
  HPIJS-install = no
  Foomatic-drv-install = no
  Foomatic-ppd-install = no
  Foomatic-rip-hplip-install = no
  hpcups-install = yes
  cups-drv-install = yes
  cups-ppd-install = no
  internal-tag = 3.11.10
  limited build = no
  UI-toolkit = qt4
  Qt3 = No.
  Qt4 = yes
  policy-kit = no
  HPIJS-only-build = no
  Lite-build = no
  udev-acl-rules = yes
  hpcups-only-build = no
  HPIJS-only-build = no

  Current content of ' / var/lib/hp/hplip.state' file:
  # hplip.state - runtime HPLIP persistent variables.

  [plugin]
  installed = 0
  EULA = 0

  Current content of ' ~ /.hplip/hplip.conf' file:
  [last_used]
  printer_name =
  working_dir =.
  device_uri = "hp: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW.

  [orders]
  Scan = / usr/bin/xsane v % SANE_URI %

  [installation]
  version = 3.11.10
  Date_Time = 2011-11-16 14:30:35

  [Settings]
  systray_messages = 0
  systray_visible = 0

  [fax]
  Email_Address =
  voice_phone =

  [update]
  rate = 30
  enable = false
  Type = 1

  [survey]
  enable = false
  device_list =
  interval = 5

  --------------------------
  | DISCOVERY USB DEVICES |
  --------------------------

  Device URI scheme
  -------------------------------- -------------------------
  HP: / usb/Officejet_6500_E710n-z? s HP Officejet 6500 E710n-z
  Erial = CN16F2402Q05JW

  ---------------------------------
  | THE INSTALLED CUPS PRINT QUEUES.
  ---------------------------------

  B-403-271-A4-COLOR2
  -------------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-Color

  B403-271-A4-BW
  --------------
  Type: unknown
  Device URI: smb://mek-ps1.win.dtu.dk/403-271-A4-BW

  HP-Officejet-6500-E710n-z-FAX
  -----------------------------
  Type: printer
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  PPD: /etc/cups/ppd/HP-Officejet-6500-E710n-z-FAX.ppd
  Description of PPD: HP Officejet 6500 e710n-z, hpcups 3.11.10
  Status of the printer: printer HP-Officejet-6500-E710n-z-FAX is inactive. activated in 2011-11-16 T 01: 00:45 THIS
  Communication situation: good

  ----------------------
  | SANE CONFIGURATION |
  ----------------------

  'hpaio' in ' / etc/sane.d/dll.conf'...
  OK, found. SANE backend "hpaio" is properly set up.

  Check the output of ' scanimage-L '...
  device ' hpaio: / usb/Officejet_6500_E710n-z? serial = CN16F2402Q05JW' is an all-in-one HP Officejet_6500_E710n-z

  ---------------------
  | THE PYTHON EXTENSIONS.
  ---------------------

  Checking the 'cupsext' extension of CUPS...
  OK, found.

  The 'pcardext' Photocard extension checking...
  OK, found.

  Checking extension 'hpmudext' I/O...
  OK, found.

  Checking the 'scanext' extension of healthy MIND scan...
  OK, found.

  -----------------
  | CONFIGURATION OF E/S USB |
  -----------------

  Checking the permissions of attached USB printers...

  For this device HP 0 x 5412 002:005:
  The URI of the device: hp: / usb/Officejet_6500_E710n-z? series = CN16F2402Q05JW
  Device node: / dev/bus/usb/002/005
  Mode: 0664

  ---------------
  | USER GROUPS |
  ---------------

  LP ADM dialout cdrom plugdev lpadmin admin sambashare vboxusers

  -----------
  | SUMMARY |
  -----------

  Without errors or warnings.

  Fact.

  I then ran "sudo hp-setup", chose the device (which has been detected), has chosen my wireless network, enter the wireless security key. On the results of configuration window, I get two messages:
  "Your printer has been correctly configured on the wireless network. You can now unplug the USB cable.
  and
  "The Ethernet cable is plugged to prevent you to connect to a wireless network. For a wireless connection, remove the cable and try again. (VSA000) »
  There is no ethernet cable connected, so I can't remove it. I unplug the USB cable and click on "Finish". What makes the "hp-setup" - beginning of dialogue even more and the printer has not been installed.
  In the terminal, I have the following:

  tjoff@MEK-403-jakbo-01: ~ $ sudo hp-setup
  [sudo] password for tjoff:

  HP Linux Imaging and Printing System (ver. 3.11.10)
  Printer/Fax Setup Utility version 9.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  Research on USB bus...
  GET/HTTP/1.1 IoMgmt/Adapters
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Profiles/Active HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/Protocols HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  error: missing answer key: ' iorotocols-iorotocol - dd:dnsserveripaddress - 0'
  GET /IoMgmt/Adapters/Wifi0/VsaCodes.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET/IoMgmt/Adapters/Wifi0/WifiNetworks/SSID = mVnmXfsu HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  GET /IoMgmt/IoConfig.xml HTTP/1.1
  Host: localhost
  User-Agent: hplip/3.0
  Content-Type: text/xml; charset = utf-8
  Content-Length: 0

  I then tried to reconnect the printer usb cable and run "hp-toolbox" and click on "Configuration without wireless/wifi via a USB port. Now, I get the error:

  tjoff@MEK-403-jakbo-01: ~ $ hp-toolbox

  HP Linux Imaging and Printing System (ver. 3.11.10)
  HP worm Device Manager. 15.0

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  HP Linux Imaging and Printing System (ver. 3.11.10)
  WiFi Configuration Utility version 1.1

  Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
  This software comes WITHOUT ANY WARRANTY.
  It is free software, and you are welcome to distribute
  under certain conditions. See the COPY of the file for more details.

  error: error writing channel
  error: an i/o error has occurred. Please check the USB connection to your printer and try again. (I/O device error)

  Fact.

  I do not understand how after this point, and any help is welcome.

  A friendly soul on ubuntuforums pointed out, that the wireless configuration is necessary only if the printer is NOT connected to a local area network (W). So everything what I should really do is to configure the printer on the page Administration of CUPS, and it worked. Problem solved. Ridicule me.

• Error "check out the printed put, put printed on may be printed incorrectly.

  When I printed this time I got error "check out the printed put, put printed on can be printed incorrectly" when I test print this time only paper to jump, no printing ink on paper & I mentioned error came also. I have reinstalleddriver & printer spooler is restarted, cable also only checked no problems found but repeat same mistake. PSL help me more early like! possible, can you help me to find what parts of the printer is damage or nuisance os?... Please help me

  Hello Vishnu,

  You can try to follow the below link to check if the common issues with printer are the reason for the error message.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I hope this helps. Otherwise, feel free to brief us back for assistance.

  Thank you

• Pinting/sharing, error 2114. The printer cannot be used by others on the network. Event ID: 315

  In my event log, I get the message "the print spooler could not share printer HP Deskject F2200 series with the HP Deskjet F2200 shared resource name.

  series. Error 2114. The printer cannot be used by others on the network.  Event ID: 315. "I have only one printer, and I'm not on a network share.  I only turn

  It's on when I need to use it.  Why I get this error?  It would cause my computer to freeze?

  BJB

  Hello

  I suggest you to refer to this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-2114/b87aa4ed-b4fb-43E0-9080-e3a7d7ffeaa3

  It will be useful.

• Cannot print and get an error message from the printer saying to close the scanner cover

  Original title: I can't seem to print on my Epson Workforce 845.

  I can't print from my computer running Windows 7 Home. I get an error message from the printer telling me to close the scanner cover. I can print without problem of my computer running Windows 7 Enterprise.

  Hello

  (1) is your computer connected to a network?

  (2) did you of recent changes to the computer before the show?

  (3) what is the exact error message?

  You can run the troubleshooter printer on the computer that faces the question and check if it solves.

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  You can also consult the following articles and check if it helps to solve the problem.

  Printer in Windows problems: http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Install a printer: http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  For any further assistance, I'd contact Epson printer manufacture support.

  Here is the link: http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&OID=184583&infoType=overview