Error 1068: the dependency service or group failed to start and failed to start the remote access connection manager service.

Similar Questions

• When I try to start the Remote Access Connection Manager in services.msc, the service will not start.

  Rick2425

  When I try to start the Remote Access Connection Manager in services.msc, the service will not start. I get the same error: "Windows could not start the service of connection manager on the local computer remote access: Error 1068: the dependency service or group could start."  Also, I can not restore the system to come and let me run it.

  It is a Dell PP31L, which belongs to a friend who does not connect to the internet because of these error messages.

  Hello Rick2425

  See the thread below and let me know if it helps thanks.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-networking/error-1068-remote-access-connection-manager/b5155a8a-671e-4d11-8a99-deadc7aee8a1

• The remote access connection manager could not start. Error 2: cannot find the specified file.

  I've updated from vista to the most recent update.

  I have windows vista Home premium 32-bit.
  I want to get this matter resolved without having to reinstall as I have a few games installed it on this system.
  The modem is not the issue as other computers connect very well.
  Thanks for the help from Microsoft.
  Recently, I tried to connect to the internet but that was not possible, because no connection could be established. The remote access connection manager does not start 2 error: could not find the specified domain. the RasMan-dependent services are started, but Manager logins remote does not start.

  Hi Mundilfar,

  You can try the folliwng steps and see if it helps.

  Step 1:

  You can try to scan the file system [SFC] checker on the computer that will replace missing or corrupt files & check if the problem persists.

  For more information, you can consult the following link.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2:

  If you are always faced with the question, then you can try to give permission for the Rasman registry key and see if it helps.

  Important: The following steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, follow the steps from the link below:

  Back up the registry

  a. Click Start, type regedit in the search box and press ENTER.

  b. Locate the following subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\RasMan

  c. right click on the key and click Permissions.

  d. Select Advanced, click on owner tab, click your user name, and check the 'Replace owner of subcontainers and objects', click Apply - click OK.

  e. click the user or group name that you want to work with.

  f. check allow total control. Click apply and then click OK.

  g. restart the computer and check.

  Hope this information is useful.

• Failed to start Remote Access Connection Manager Service. Get the 20 error: the system cannot find the specified device.

  This seems to have started with the last batch of updates of Windows 7 (including SP1).
  I can't connect using dial-up.  Get the message:
  Cannot load the Remote Access Connection Manager service
  Error 711: The operation could not complete because it could not start the remote access connection manager service
  in time.  Please try the operation again.

  When I try to start the Remote Access Connection Manager service manually, I get the message:
  Windows could not start the service on Local computer remote access connection manager.
  20 error: the system cannot find the specified device.

  My phone displays the modem works properly, and telephony and the Secure Socket Tunneling Protocol service started.

  I don't know what else might have changed.

  Hello Vince_867,

  Thanks for your post.  Take a look at this thread for a possible solution to your problem.

  See you soon

• Can not get to start remote access connection manager and the connections don't work Internet

  Original title: wired & wireless connections does not.

  I can not get the remote access connection manager to start and so no internet connection is not working, also I can't open the system restore to go back on this machine. What is this?

  I am running a Dell Studio 1735 PP31L w model number / Edition Vista Home premium.

  Hi Rick,

  1. what happens when you try to start the remote access connection manager? You receive messages or error codes?

  2. you receive error codes or restore messages when you perform the system?

  You can check the status of the following services and make sure that the services are started.

  a. Click Start and type Services in start search and press ENTER.

  b. in the services with the right button on the phone and then click Properties.

  c. under the general tab, select automatic next to startup type.

  d. under the general tab, click Start under the service status and then click apply and then click OK.

  e. Repeat steps c & d to the remote access connection manager and Remote Access Auto Connection Manager service.

  Hope this information is useful.

• After the remote access connection, network printers disconnected

  I hope someone can help me here.

  In Windows Vista, whenever I would give the remote access connection to my PC at home, my default printer (which was be a shared printer on the network out of my server) will prepare its default value.  It was boring but easily fixible.

  I've since upgraded to Windows 7 Ultimate and I'm having a related problem.  Now every time I connect remotely to my home PC, my default printer (same network shared printer - HP LJ 4000) disconnects, and it only comes back online after a reboot.

  It is a point of pain is huge for me because I usually 20 + / applications windows running at a given time and a restart takes 30 minutes out of my day to get back to where I was.

  Any help would be appreciated. Jeff Balcerzak

  http://h30434.www3.HP.com/T5/printer-all-in-one-software-and/Windows-7-C7200-C7280-offline/m-p/167672

  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/0cfa31d7-B44B-4241-aa31-d0ae9f0a2112

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00843712&tmp_track_link=ot_faqs/top_issues/en_US/c00843712/loc:8 & lc = en & dlc = en & cc = us & product = 1153481 & lang = en

• Password for the remote access connection file

  Deal all,
  
  I have enough space in my production machine to keep rman backup.so, i thought to install the client software oracle in a client computer and then configure ramn backup location as long as the client computer.
  
  But the problem is that I have not the target database sys user password. So, I thought to recreate the file password of the target WITHOUT STOPPING database down THE TARGET DATABASE.
  
  orapwd file = password = password strength location = entered y = 30
  Now, if I execute the above command without closing the database, if it couse no problem...?
  
  Thanks and greetings
  
  Yvon Das

  Yvon says:
  OK, if I create a passwordfile without closing the database it will create no problem...

  Not at all

• Error 711; Remore access connection manager service will not start

  Error 711; Remore access connection manager service will not start

  Hello

  Thanks for posting your question in the Microsoft Community!

  When exactly do you get the error message?

  This error message appears when a required service is not started on your computer. You won't be able to connect to a network, and you might not be able to install network cards.

  This problem may occur if some or all the following services are not started:

  • Plug-and-Play
  • Remote Access Auto Connection Manager
  • Remote Access Connection Manager
  • Telephony

  You can see test link following the steps and check:

  Get help with "Error 711" message

  http://Windows.Microsoft.com/en-us/Windows7/get-help-with-Error-711-message

  Do not post the State of the question.

  You can always view in Microsoft Community if you need help with Windows.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• Windows could not start the service on the Local Computer Security Center. Error 1068: The dependency service or group could not start

  I use Windows 7 Home Premium

  My windows Security Center cannot be started. I spent to the Microsoft Management Console and tried to launch security through Services Center, but when I do I get the following message is displayed:

  "Windows failed to start the service on the Local Computer Security Center.

  "Error 1068: the dependency service or group could not start"
  Help, please.
  Thank you.

  Hi Rohit Chettri ,

  (I am not good in English)

  I am trying no operation troubleshooting you mentioned. I have it set for myself.

  I clicked on something related to the denfence in the heart of the action and when I restarted my computer is off almost all services. I couldn't even connect to the internet

  I went to the Configuration System (msconfig)-> services-> active tab all services and restart. After that my computer works normally.

  In any case thanks a lot Rohit Chettri.

• Windows spooler printer 8 error 1068: the dependency service or group could start.

  Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

  I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
  But I get an error:

  "Windows failed to start the Service on local computer print spooler.
  Error 1068: The dependency service or group could start.

  "Okay, so I go into properties and see what are the dependencies.
  Attached image:
  

  RPC is running, however, no FAX.
  Go to Fax and just getting started. I get the error 1068
  Focus on dependencies here.
  Attached image:
  

  IM lost at the moment.
  Any help would be greatly appreciated.

  I ran sfc/scannow and found no problem.

  Please notify.

  I found this somewhere else and this fixed my problem

  I had the same problem and I have created a batch file that I have run as Administrator:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• Error 1068: The dependency service or group could start.

  When you try to start a few automatic services (who of course has not started automatically) I get this error. Check the list of dependencies for each service they all list the HTTP Service. I have run this command: beginning of config sc = HTTP request and get a message that it succeeded, and restart the computer. No change. I run and do not restart the computer - no change. I ran sfc/scannow just in case he might find something but nothing. I even reinstalled the upgrade of Windows 8 thinking it could replace all of the corrupt files. No change. I wonder if it can also be the source of some other problems I'm having. With a certain Windows update for example.

  Any help would be greatly appreciated.

  After you determine that the 'http' service was one of the dependencies for the print spooler start, and after finding that there is no such service listed, I came across this answer, which will allow you to CHANGE the dependencies. Basically, I deleted 'http service'. Click on the link below and scroll down to "method 3".

  http://www.techsupportall.com/solved-print-spooler-error-1068-the-dependency-service-or-group-failed-to-start/

  Obviously this response of mine is almost three years after the original question posted, but maybe it will help someone else in the future.

• No firewall or Internet, Windows Firewall errors: "0x8007042c" and "error 1068: the dependency service or group could start.

  Problem started when the McAfee Firewall shuts off and I could not turn it back on.  Also I can't activate Windows error 0x8007042c firewall.  Also no Internet access due to firewall restrictions.  Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start.  Strangely, the McAfee Firewall seems to be OK again?

  McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.

  http://www.selectrealsecurity.com/malware-removal-Guide/

  I hope this helps.

• Windows Vista firewall problems. Error 1068: The dependency service or group

  When I try to Active my windows firewall I get
  the following message appears:

  "Windows Firewall settings cannot be displayed because the associated.
  service is not running. You want to start the windows firewall service? »

  The yes/no option.

  If I clicked 'Yes', another message appears saying:

  "Windows cannot run the Windows Firewall service.

  Okay, so I'm trying to start this service. I looked at the service
  status and stopped her, so I guess it must be started, if I click on
  beginning. However, the message:

  «Cannot start service on local computer windows firewall.» Error 1068: The dependency service or group
  Could not start.

  What else can I do to access the windows firewall?

  Hi elcri

  My apologies to zero you answer you earlier since May 3.

  I have to assume that the problem is still there?

  Allows to check and see if the ICS Service is running or not (we want to disable it if it is enabled/running)

  Click Start
  In the box, type start search in services of
  List programs, right-click on service , and then click run as administrator
  Scroll down the list of Services until you come to (ICS) ICS

  Is it enabled or disabled?  If on, double-click top and change startup to off and stop the service.
  Reset

  I would like to know if this solves the problem or not - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.