Error 1068: Unknown connection status: the service dependency or groups could start

Hi all

I ave a problem with Vista service pack 2 running on Sony viao with the network. I have access to the internet, but my connection icon has a red X on it with the message "unknown connection status: the dependency service or group could not start". I did my homework to browse all the threads and have performed all of THE following conditions, but the problem persists.

1. in the course of execution sys check through sfc/scannow

2. reset TCP/IP through 1. netsh winsock reset 2. netsh int ip reset

3. verification of all services such as the services in the list of networks and knowledge of network locations.

However the problem persists. I cannot forget to mention that the list of Network Services and network location awareness not start I get the same error when I try to start them. I checked all the services above is dependent on and they are started and set to automatic.

Is there anything else I can do to solve this problem other than the system of recovery or reinstallation? I have some stuff on my laptop that even if I save them I have given will be lost. for example the accounting software with its data, software for which I don't have the disk to re - install and the data in them cannot be saved on a server running. To make the story short, I really want to avoid recovery on the option of resettlement

As I said, I have access to the internet, but the mere fact that this problem is there, its that bothers me and I don't want to run bigger problems later

Any help would be greatly appreciated

Thanks in advance

Hi IMOMDS,

1. don't you make changes before the show?
2. have you checked if the network connections and support TCP/IP NetBIOS services are started?

Try these steps and check the result.
Step 1: Virus scanner online
a. visit http://onecare.live.com/site/en-us/center/whatsnew.htm
b. click Full Service scan and complete the scan.
c. check the difference.

Note: Use your favorite security software to search for viruses or malware on the computer and remove it.

Step 2: If the problem persists, restore the computer to an earlier time when it was working fine
a. see what is system restore?
b. Once you have restored the computer, check if the problem persists.

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • When you try to convert a word document I get "an error occurred when connecting to the service. "Please try again later".

    When you try to convert a word document I get "an error occurred when connecting to the service. "Please try again later".

    Hello

    We apologize for the inconvenience. The site is under maintenance at the moment, the concern team strives to resume the services soon.

    Kind regards

    Christian

  • I get an error, "Unable to connect to the Service of system event Notification service" on the computer.

    Original title: unable to connect to a service of windowns

    I had this problem! "Unable to connect to the Service of system event Notification service. This problem prevents standard users to log on to the system. As long as administrator, you can go through the system event log to see why the service did not respond"how to solve?

    Hello

    Thanks for posting this question in the Microsoft Community.

    From your post, it seems that you can not connect to a windows service.

    When you receive this error?

    Check if the Service Notification of system events is running or not. To check the services

    a. click on start.

    b. in the start search box, type "Services".

    c. click right on - RUN AS ADMIN

    Check if the below mentioned, service was mentioned State and type start.

    System Event Notification Service started automatically

    Go back with the details so that we can help you better.

  • Weather gadget issue, error: ' unable to connect to the service.

    Original title: weather gadget problem

    I am running Windows 7 and I'm trying to change the weather gadget in my city.  I typed in my zip code, it recognizes it, but says "unable to connect to the service.

    Until I received this suggestion I solved the problem by uninstalling the weather gadget and download another.  He worked after doing this.  I checked the regional and Language Options, and they match.

    Thank you.

  • Error message: unknown connection state. The dependency service or group was able to start.

    I installed Office 2010 on my computer with Vista and now can't connect via cable or wireless.  I get the error message: unknown connection status. The dependency service or group was able to start.  I know that the router and the wireless work.  I tried several of the mentioned patches, but nothing has worked.  My Verizon card works.

    Hello Chelen,

    I suggest you visit this Microsoft TechNet thread where they discuss the same problem you are having:
    This response may be useful:
    "I also had the same problem and the solution above does not work.

    My problem was caused by corruption in the TCP/IP stack

    To fix, you need to run a command as administrator prompt

    Start > all programs > Accessories > prompt (right click and run as administrator)

    At the command prompt, type: netsh winsock reset

    "Ignore all errors, restart and voila'.

  • Unable to connect to networks wireless on laptop Windows 7 Enterprise. Cannot start the autoconfiguration WLAN service. "Error 1068: the dependency service or group could start."

    original title: cannot start service autoconfiguration WLAN and EAP services

    I am not able to connect to my wireless network. When tried to connect, it shows just "unable to connect."

    I have the Intel WiFiLink 5100 adapter with the latest driver for Windows 7 Enterprise 32-bit installed. The laptop is not a wireless connection manager and I am trying to connect using the Windows wireless connection manager.

    I checked in the Services and found that service autoconfiguration WLAN and Extensible Authentication Protocol services are not running.

    When I tried to start the WLAN auto configuration service, I get the following error...
         Windows could not start the service WLAN autoconfiguration on Local computer.
         Error 1068: The dependency service or group could start.

    When I tried to start the service of Extensible Authentication Protocol, I get this error...
         Windows could not start the service on Local computer Extensible Authentication Protocol.
         Error 1053: The service did not demand launch or timely control.

    I found that all dependent services for the EAP are running. And all dependent services for autoconfiguration WLAN service are running except the EAP service.

    I searched the internet for the solution madly before posting here. Any help is greatly appreciated!

    Take a look at this > http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/f9b835f2-c2da-43b9-883f-2b2a157c3921

    This link has the solution that worked for me.

  • «Cannot start service on local computer windows firewall.» Error 1068: the dependency service or group could start. »

    Hi, I tried many things resolve. I update my Vista last Kit. I also sort things like using CCleaner RegClean Pro...

    I also tried sfc/scannow
    and here's SOME of my journal:
    and you can download the entire .txt file here: http://www.box.net/shared/gco69vkso2kh2y7jaxas
    I also tried this:
    C:\Windows\System32 >netsh winsock reset
    Unable to load the programme of assistance following DLL: WSHELPER. DLL.
    Unable to load the programme of assistance following DLL: IFMON. DLL.
    The following command was not found: winsock reset.
    I also tried to run and do the MicrosoftFixit.WindowsFirewall.Run.exe nothing works.
    Please and thank you.

    Hi, Jahkr,

    Log shows that you had corrupted files and components.  System File Checker could not repair files try to repair the files first.

    See this document for corrupted files

    http://support.Microsoft.com/kb/929833

    To resolve this problem, make sure that all dependent services have been started. To do this, follow these steps:

    • Click Start, run and type Services.msc
    • Double-click the network connections entry
    • Set its Startup type to manual
    • Click Start to start the service
    • Double-click Windows Management Instrumentation
    • Set its startup type to Automatic
    • Click Start to start the service.

    After you start the services of two dependants, try to start the Windows Firewall service.

    http://www.Winhelponline.com/articles/145/1/error-1068-error-message-when-you-try-to-start-the-Windows-Firewall-service.html

  • "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

    I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

    Hi Jkoryzna,

    Thank you for choosing the Microsoft Answers forum.

    To solve the problem, fix the dependency for the spooler service information.

    Click Start, run and type the following text:

    CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

    Alternatively, to achieve this by using the Registry Editor:

    Click Start, run and type Regedit.exe

    Navigate to the following branch

    HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

    In the right pane, double-click the DependOnService value

    Delete existing data and then type RPCSS

    Close Regedit.exe.


    REGISTRY WARNING

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

    Navigate through the steps mentioned in the article below.
    Solve printing problems by resetting the print spooler.

    http://support.Microsoft.com/kb/2000007

    Let us know if this helps

    Concerning
    Anthony.

  • No firewall or Internet, Windows Firewall errors: "0x8007042c" and "error 1068: the dependency service or group could start.

    Problem started when the McAfee Firewall shuts off and I could not turn it back on.  Also I can't activate Windows error 0x8007042c firewall.  Also no Internet access due to firewall restrictions.  Tried to manually turn the Windows Firewall service (as an administrator), but now get error 1068: the dependency service or group could start.  Strangely, the McAfee Firewall seems to be OK again?

    McAfee and click OK in the same sentence? Hmmm... Take a look at this site for some good information and instructions for the removal of malicious software.

    http://www.selectrealsecurity.com/malware-removal-Guide/

    I hope this helps.

  • Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

    I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

    Thank you!

    It comes with Vista, upgrade install and activate Forum.

    http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

    They will help you with your printer issue in Vista Hardware and drivers Forum above.

    See you soon

    Mick Murphy - Microsoft partner

  • Windows spooler printer 8 error 1068: the dependency service or group could start.

    Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

    I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
    But I get an error:

    "Windows failed to start the Service on local computer print spooler.
    Error 1068: The dependency service or group could start.

    "Okay, so I go into properties and see what are the dependencies.
    Attached image:

    RPC is running, however, no FAX.
    Go to Fax and just getting started. I get the error 1068
    Focus on dependencies here.
    Attached image:

    IM lost at the moment.
    Any help would be greatly appreciated.

    I ran sfc/scannow and found no problem.

    Please notify.

    I found this somewhere else and this fixed my problem

    I had the same problem and I have created a batch file that I have run as Administrator:

    CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  • Unknown connection status - unable to connect to the Internet, Vista

    Hello. My computer was working fine last night, but when I started it today, I couldn't go online. When I move the mouse over the network and the share icon in the lower left corner of the computer, he said: "the dependency service or group could start unknown Connection status. When I try to diagnose the problem, I can not because the diagnostic policy Service is not running. When I go to the Open Service Control Manager, access is denied.

    Meanwhile, I keep getting warnings that my firewall is not enabled. When I try to enable it, I get a message that Security Center can't turn on.

    I ran Avast and he found nothing wrong. I tried to do a system restore, but that did not help. I tried to go to "Connect to the Internet" via the control panel and network layout and I was told that the wizard has encountered an error and could not connect. I can't connect and I can't always turn on a firewall. What should I do? Please help me.

    Hello

    Maybe an update caused the problem, although it could have been something different.

    Try a restore of the system to a point before that happened. And immediately thereafter enter
    Control Panel - Windows updates - top left settings and set it to download and informs you instead
    Automatic. Leave it until you are sure that everything is OK and then you can add them one at a time
    to troubleshoot BUT click right on and HIDE all the driver updates. If after a day or two there is no
    causing problem of updates then restore the automatic updates.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    To uninstall an update if you determine that there are problems - Panel - updated Windows - down left-
    Updates installed - uninstall
    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Cannot connect Windows Marketplace error connection to the service.

    Original title: Cannot connect to Windows Marketplace

    When I try to connect, I get the following message:

    Error connecting to the service.

    There was a problem connecting to the Games for Windows - LIVE service. Click Retry to try connecting, or click on troubleshoot to attempt to diagnose and fix the problem.

    If you continue to have problems to connect, you may need to contact your ISP for assistance.

    I am able to use all internet services.

    Hi Torrey,

    I suggest posting your question in the games for Windows Live Marketplace forum located here:

  • "Error 1068 - the device of dependence or the group could start" _

    "Error 1068 - the device of dependence or the group could start" Windows could not start the service Acquisition of Image Windows (WIA) on the local computer.

    Problem: Cannot parse documents!

    In the type of search: services

    Click on the services that is present at the top of the list of programs.

    Scroll down to purchase picture Windows (WIA).

    Double-click it, and then click the Dependencies tab

    Make sure that all services Windows Image Acquisition depends, are running

    Switch to the "Recovery" tab and replace all drop-down lists 3 "Restart the Service".

    Make sure the 2 boxes of Reset below say '1' to them.

    Click Ok.

    S.Sengupta Media Center MVP

  • Could not connect to the Service Provisioning (from Studio EID)

    Hello

    I installed stand-alone short 3.1 in my reserved instance.

    Short server and server ETL Integrator, Studio server Provisioning Service is installed successfully and all servers are up.

    I checked the State of Service Provisioning as well and here's the status.

    Information Provisioning Service 3.1.0.0 short Oracle discovery review 2484

    Short Server Communication SUCCESS

    Access database backend SUCCESS

    Still, I get error "Could not connect to the Service Provisioning" when configuring Studio EID commissioning Service.

    All servers have been installed in SSL mode and follows the JSON string I used to set up PS for EID Studio.

    {

    "port": "8202."

    'server': 'localhost', //tried with the hostname as well and same was the mistake.

    'sslConfig': {}

    "caFile": "endecaServerTrustStore.ks",

    "caPassword:" *,"

    "FichierCert": "endecaServerClientCert.ks",

    "SubscriptionId" *:

    }

    }

    How to solve this problem?

    Thank you

    Sandeep,

    You have endecaServerTrustStore.ks and endecaServerClientCert.ks in the record studio?

Maybe you are looking for