Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service

Windows cannot start the Diagnostic Policy on Local Computer Service?

Original title: error 1079

Hi Craig,.

Thanks for posting your question in the Microsoft Community.

From your post, it seems you are getting and error 1079.

The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.

What service are you trying to start?

We will follow the steps in this link and check if this solves the problem.

Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

Thanks for posting the result and let us know if you need help on Windows.

Tags: Windows

Similar Questions

  • Windows cannot start the Diagnostic Policy on the local computer service

    Error 1079: The account specified for this service is different from the account specified for other services running in the same process.

    Not sure, but sounds similar to this old post - http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/error-1079-windows-could-not-start-the-diagnostic/c0fad337-6f2f-47d5-8a27-ab52f337b222

    who can help or give some advice in the right direction at least. Good reading (Handbook for your service) and see what you think.

    If you change whatever it is, try to note what change you or save your PC first, so you can change it if it does not help.

    OR, if it has recently started to happen, try a restore point to a date just before that the problem started.

    If this isn't the case, I hope that someone else will offer you something to try soon.

  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

    Ideas:

    • You have problems with programs
    • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Hi sanjeevkode,

    Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

    VMware communities: http://communities.vmware.com/home.jspa

    In the meantime I suggest you try these options / methods

    IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

    Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

    Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

    Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

    Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

    The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

    Let me know if it worked.
    Hope it will be useful.

    Thank you and best regards,
    Vijay K - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think.

    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • service or group of addiction was able to start; Cannot start the diagnostic policy service

    I have windows vista Home premium. I did have a problem connecting to internet before. So today, I can't connect to my router, either by wireless or ethernet.  The router is fine, because my roommates are able to connect.  The signal is also excellent, but my computer is "connected with limited access".   The message I get is: 'unknown connection status. The dependency service or group was able to start. "" When I click on diagnose and repair, it says Network Diagnostics cannot run because the Diagnostics Policy Service is not running "then it gives me the option to open the Service Control Manager to manually start the diagnostic policy Service.  This opens a window of Services with a huge list of things I don't understand.  I searched for solutions to the problem, and none have worked.  Any advice greatly appreciated.

    Hello, Lesley

    Thank you for using the Microsoft answers Forum!

    The following information is taken from: http://support.microsoft.com/kb/943996

    Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk!

    It is possible that the permissions on a specific registry key has changed. You can try to correct this by clicking on start, type regedit in the prompt, do a right click the program regedit and select run as administrator. In the registry editor, click the arrow to expand the selection, go to HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Services, DPS, on the right, click settings and click Permissions.  In the permissions screen, select the user TrustedInstaller . If you do not see the TrustedInstaller user, click Add, type NT TrustedInstaller service and press OK. If make sure that permissions full control and read are checked for the TrustedInstaller user.

    Let us know if that helps.

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • manually start the diagnostic policy service 5 error: access denied

    Cannot start manually diagnostic policy receive error 5: access is denied.  I can not connect to wireless internet or start my firewall.

    Hi tankrum,

    The article below describes the problem faced by you. Click on the tool of automated troubleshooting described in the article below to solve the problem.

    Some services do not start in Windows Vista

    http://support.Microsoft.com/kb/943996

    The problem should be gone after running the troubleshooter.

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

    On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

    Hi jdmanel,

    NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

    Follow the steps in the article.

    You cannot start the Windows Firewall service in Windows XP SP2

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

    For reference:

    How to manually open ports in Internet Connection Firewall in Windows XP

  • error message "Windows cannot remove the password. "Password policy or account require the account has a password.

    original title: remove administrator account or remove password

    I am trying to remove a user administrator account or remove the password and I get the error message below. Also, I can't delete the password as an administrator in Windows 7 32 bit or delete the account. I get this error message "Windows cannot remove the password. "Password policy or account require the account has a password. I tried to create another admin account, but it does however not take away the password or delete the account else

    Someone has put a policy on your machine to enforce some rules for passwords. Best is to ask that person to change these rules for you. Alternatively, you can run gpedit.msc, then follow this path to edit yourself: Local computer policy / Computer Configuration / Windows settings / security settings / account policy / password policy.

    Note also that:
    -You cannot delete the built-in Administrator account.
    -Administrator with a blank password accounts is a big security risk.

  • Error of 0x8007042c, cannot start the Windows Firewall

    Original title: error 0x8007042c, you cannot start the Windows Firewall

    Help

    I can't have the windows firewall to install and run...

    I have a picture of a mistake, but I don't know how to post the photo of the error here.

    Firewall Windows cannot change some of your settings
    Error code;   0x8007042C

    Concerning

    Bill

    E-mail address is removed from the privacy *.

    Old man again on XP PRO

    Hi Dan,.
     
    You might have a corrupted user profile, I'd like you to create a new user account and test the question.
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

    When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

    Where can I find the required file?  It is available from Microsoft to download?

    Thank you

    It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

    Register various fixes for Windows 7/XP/Vista:
    http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

  • Windows cannot start the firewall service.

    Original title: my firewall stopped working and it won't let me turn it back on.

    My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

    Hey, bed,.

    File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

    Information available at:

     

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error message "Windows cannot access the specific device, a file, or a path. "/ setupstb.exe".

    One offers a solution to my problem of Vista Home Premium that prevents me to access my Microsoft Web Cam (also "glik' won't let me upload files.). Thank you very much in anticipation. Tony

    Hello

    Please only post the same question once in these forums

    an answer another thread

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/error-message-Windows-cannot-access-the-specific/603544f6-b346-E011-86fd-d485645a8348?page=1&TM=1299283083484#footer

  • error message "Windows cannot access the specified device, file, or the path."

    Whenever I try to open a file even my music internet explore or anything that I get an error message Windows cannot access the specified device, path or file.

    Hi nanditaberi,

    Since when are you facing this problem? What were the changes to the system between the time where everything has worked, and when you noticed the problem?

    This problem may be caused by this security software on the computer, uninstall them might solve the problem.

    Example: AVG, Zone Alarm

    Important:

    O before you uninstall the security software disconnect the computer from the internet. Make sure that the windows firewall is enabled.

    Ø you may need to check with the manufacturer of security software for reinstallation and activation.

    O re - install the security software on the computer.

    Reference:

    Please read the steps provided by, Donna, dated Saturday, January 3, 2009 14:01click here for the post.

    A scanner online for any threat and try to correct

    http://OneCare.live.com/site/en-us/Center/cleanup.htm

     

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Impossible to install World of Warcraft and the error message "Windows cannot access the specified device, path or file. May not permissions to access you the item.

    Original title: Need help ASAP please

    Hi all

    I am currently running windows 7 and recently I met a problem that has been giving me the error code: 0 x 80070043 and the Error Message: Windows cannot access the specified device, path or file. You can't have appropriate permission to access the item'. When you try to run a Setup.exe for world of warcraft. But the thing is I am the administrator of the computer and have not had this problem in the neck, it is their all settings or something I can do to fix this? any help would be greatly appreicated thanks and God Bless.

    Hello Jay,
    Thanks for posting your question in the Microsoft Community forum.
    The description of the problem, I see that you are unable to install World of Warcraft and error message "Windows cannot access the specified device, path or file. You can not have appropriate permission to access the item".»

    This problem may occur if you do not have permissions for the file or the location of the file, if the file is located on a site that is not accessible at the moment as a network location or an external drive that is not currently connected to the computer or your antivirus software may block the file.

    Don't worry; Let's try a few steps that will help you solve the problem.

    Method 1:
    I suggest you run the fix it and check if it helps.

    Solve problems with programs that cannot be installed or uninstalled
    http://support.Microsoft.com/mats/program_install_and_uninstall

    Method 2:
    If the problem persists, I suggest you try the procedure described in the article and see if it helps.

    Error "Windows cannot access the specified device, path or file" when you try to install, update or launch a program or file
    http://support.Microsoft.com/kb/2669244
    You can check the links for more information:

    Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

  • Error message: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete" and DVD disc is not recognized.

    Original title: My DVD drive is not recognized, it works physicaly works fine, but the pc does not even detect it exists.

    The error that says: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

    I did a backup and restored my system to the factory settings. After doing this still dvd was not recognized. I don't know what to do, my computer is new and Security told me that they will restore the pc and try to fix it, I can't risk my documents of the University are the same that has not worked for me before.
    Could someone help me?
    -The pilot is the last in line.
    -The works of reader dvd but the computer is not reading it, it does not even appear on the section 'computer '.
    -J' tried to use a "fix - it" on Microsoft online, but it doesn't work anymore.
    -My OS is Windows 7.
    -A restore factory settings did not work at all.
    Thank you.
    Claudio Nahmad
    Mexico City

    Hi, Claudio Nahmad,.

    This error can occur if the data in the registry for the device and its driver has been corrupted.

    Since you have already done a factory restore, leave, try to uninstall and reinstall the driver CD\DVD and check if it helps.
    Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

    We can also refer to article and check if it helps.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    Important: The above links contains steps to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

    For more information, you can view the article:

    Back up the registry

    You can also try to install Windows updates, including optional updates driver and check if that helps.

    Install Windows updates in Windows 7

    Hope the helps of information.

Maybe you are looking for