error 1114 dynamic link library (DLL) initialization of the routine failed.

I can't connect to internet

Windows could not start the Service diagnostic on the local computer policy.  error 1114 dynamic link library (DLL) initialization of the routine failed.

What is the solution to this problem everyone?

Hello
1 did you change on your computer before this problem?
2. When you receive this error message?
3. are you using Internet Explorer? If Yes, what version of IE are you running?
Find out what version of Internet Explorer you are using
http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

 
Follow the suggestions and check if that helps.
Method 1
(a) click Start .
(b) in the search box type services.msc
(c) right click on Diagnostic Policy service and go to the Properties.
(d) select Auto under Startup type.
(e) click Start .
(f) click on apply and OK.
(g)restart your computer.
 
Method 2
You can run the System File Checker.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
 
Method 3
You can perform the clean boot to see if a service is causing this issue.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After a troubleshooting follow step 7: reset the computer to start as usual

Tags: Windows

Similar Questions

  • "A dynamic link library (DLL) initialization routine failed." NVIDIA drivers

    So I recently wanted to install new NVIDIA drivers on my computer.  The installer downloaded completely and at the time where he finished extract the files of the error "a dynamic link library (DLL) initialization routine failed."  Since then, I uninstalled my drivers and I can't always install the new drivers.  Now I'm stuck with no driver at all.

    I asked this question on NVIDIA support page and have not received a response, so I came here to ask.  Help is very appreciated.

    Thank you

    I understand your willingness to help me, but I have advanced and reinstalled windows. Got the new driver installed and everything works fine.

    Thank you

  • a dynamic link library (DLL) initialization routine failed.

    Original title: DLL routine failed

    I downloaded a program from CNET. Did not work so I removed it. A day or two later, I get the following error a lot.

    There was a problem starting

    C:\Users\EDITIN~1\AppData\Local\Temp\sbussnv\ssnyoyr\wow.dll

    a dynamic link library (DLL) initialization routine failed.

    I ran the auditor system and program files Microsoft security and found no integrity issues.

    At this stage it would be easier to upgrade to Ultimate (I use Professional now) that in order to understand the problem of the DOF. I guess the upgrade I will lose all files/programs, correct.

    Thank you

    Yes, that's correct Loran.  You can use the Professional disc window and perform the upgrade. This will put just the new copy of your computer's system files.

    But if you have the Ultimate version, you can use the ultimate disc or the ultimate product key to upgrade.

  • Accidentally deleted a dynamic link library (DLL) file and the need to replace one possibly other system files - what is the best method?

    I did a system restore to a point before that my main user account has been established.  I had to set up a new user, and then it was suggested that to copy all the data of the user "existing" to the newly created user.  When I did this it's not well at all and some DLL files have been corrupted or deleted or not connecting correctly to the user of your choice.  I actually then did a restore of the system to the last restore point.  However, given that SR does not change the data, I was stuck with the wrong DLL and other system files.  I thought I had stupid test because I had backed up data.  I tried to restore to an earlier point (using Windows backup and restore).  Unfortunately the restore will not work and I get the following error: "a systematic failure of the initialization of the Dynamic Link Library (DLL).  I need to repair or replace the corrupt to get the system back and then protected files again.  I'd appreciate any help!

    Thank you

    In the case that he is a protected system file, you can check if you can always run the System File Checker

    http://support.Microsoft.com/kb/929833

    You can boot from a system repair disc to retrieve an image from the previous system that you have made.

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  • Message at the beginning upward: Dynamic Link Library DLL is not found

    Hello all,.

    I'm a bit an IT numpty but all recently when my laptop starts it takes more time to start and I get the message: "Dynamic Link Library is missing.

    Does anyone know how can I fix?  A very simple language please!  See you soon.

    Download and run AutoRuns [1] and see if you find rundll32.exe entered and clear so the message.

    André

    [1] http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

    "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  • the Dynamic link library initialization routine failed

    When I right click on an item in my document library, you receive a DLL error run, "there was a problem starting (new line) C:\Users\whatever\wow.dll (new line) a dynamic link library (DLL) initialization routine failed."

    I restarted mode without failure, and the problem was gone. Back in normal view, the problem remains.   I ran the Microsoft Safety Scanner and found no viruses or problems.  Problem still remained.   I did a clean boot and the problem remains.

    Any suggestions?

    TomIV

    Hi Tom,

    I appreciate your efforts on this issue.

    Wow.dll is a library file that is responsible for the parasite main functions implementation and execution of its destructive payload. The file wow.dll cannot run by itself and therefore must be loaded with the help of some executable files. However, certain parasites reconfigures the operating system or installs wow.dll as a plugin, so that the system or certain applications it load automatically at startup.

    The wow.dll file is installed and used by Wowcraft.e. In most cases, wow.dll is responsible for all the harmful actions that takes the pest. Remove this file will immediately terminate the parasite or partially disable it. This is why the wow.dll file must be deleted manually. If you cannot erase it, consider using the removers spyware recommended, which will get rid of wow.dll and associated parasites for you.

    In some cases a presence of wow.dll does not mean that your system is infected. The file may belong to some legitimate applications and therefore must remain intact. If in doubt, please scan the file wow.dll you regular spyware remover or antivirus program.

    Initially I suggest you refer to the Dodgers022255 post responded on 16 April 2013 for the help below link.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/a-dynamic-link-library-DLL-initialization-routine/2540cea9-b2ec-42BC-8234-431a30020b8b

    Scan your computer using Microsoft Safety Scanner mode safe mode with networking.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Note: When, at the forefront of startup options select safe mode with network.

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    Check also if you face the same question in the new user account.

    Create a new user account-
    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

    It will be useful.

    Let us know if you encounter problems with Windows in the future. We will be happy to help you.

  • "Setup error!... LiteHtml.dll dynamic link library.

    Can someone please help with this error massage that appears after trying to install the Autodesk software from a USB... "the product entry point? "SetComboBoxLocAndDropDownHeight@CtrUtil@@TAHAAV?$CComboBoxT@VCWindow@ATL@@@WTL@@IHH@Z found in the LiteHtml.dll dynamic link library.

    Hello
    the error is said he cannot find dll files needed, where they are supposed to be... This was previously on a network?
    Try this link:
    http://USA.Autodesk.com/ADSK/servlet/index?ID=7460177&siteid=123112
    b Eddie

  • Twister.exe point not found the procedure entry point LeaveCriINDX (not found in KERNEL32.dll dynamic link library

    Original title: Entry Point not found error with a game

    My game (Nancy Drew: trail of the Twister) has malfunctioned or something. It worked fine for a while, but now I get this error when I try to start the game (twister.exe point not found the procedure entry point LeaveCriINDX (not found in KERNEL32.dll dynamic link library) none of using the solutions of HERInteractive.) My OS is Vista. Help, please!

    Hello

     
    I would like to inform that the error, the entry point not found:

    This error could be related if there are some missing files to initialize the game. I suggest that you uninstall and reinstall the game and check if you have the same problem.

    http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

    Also check if the minimum requirement of games is the specification of your computer.

  • "450 ordinal is not found in the dynamic link library urlmonn.dll" or something. What does that mean?

    I downloaded and installed the windows 7 transformation pack and then when I removed it a few months later he repeated this message whenever I started a program.

    . DLL or Dynamic Link Library files are collections of routines or function that are accessible and used by one or more programs as needed. The Ordinal Point is an entry point or address where a program can expect to find a specific routine or function. Different versions of a. DLL can have different collections of routines that is held inside and as such, addresses can vary.

    It would seem that the "transformation pack" has another (e.g. updated...?) version of the urlmon.dll file and 'remove' the transformation pack made the remaniing version on your XP with problems.

    You could try the reinstatement of the existing urlmon.dll. Tap on the Windows key + R or click on Start, run - paste or type in the following in the text Open run dialog box.

    regsvr32 urlmon.dll

    ... and click OK. If this does not resolve your problem, you can also try a full System File Check. Tap on the Windows key + R or click on Start, run - paste or type in the following in the text Open run dialog box.

    cmd

    ... and click OK. At the opening of the command window, type the following,

    sfc/scannow

    ..., and then tap on . The process will take a few minutes depending on the speed of your computer. This process' Scans integrity of system protected all files and repairs files with problems when possible ".

    Please note that you mentioned a urlmonn.dll. I'm not familiar with this specific. DLL and have provided guidance for the reinstatement of the urlmon.dll instead. If the stray file is indeed urlmonn.dll please adjust the instructions accordingly.
  • error AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library

    I tried to update my iTunes this weekend.  Now, I can't open it I get this error: AVCFPlayerSetclientEnforcedExternalProjectionMethod is not found in the AVFoundationCF.dll dynamic link library is on a Windows 7 computer.  I tried to re - install outside of iTunes and repair.  But no luck.  Should I uninstall iTune and then re-install?  Help.

    These errors can usually be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. AVFoundationCF.dll belongs to Apple Application Support and are normally in

    • C:\Program Files\Fichiers Files\Apple\Apple Application Support or
    • C:\Program Files (x 86) \Common Files\Apple\Apple Application Support

    where the name of the Program Files folder may vary depending on the region.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

    More information area has direct links with the current and recent if you have problems to download, must revert to a previous version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for the problems of performance or compatibility with third-party software.

    Your library must be affected by these measures, but it is also related to backup and recovery advice if necessary.

    TT2

  • How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

    I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

    Thank you!

    BlindingFog said

    I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

    Thank you!

    I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.

  • Error "the procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library" when you try to play Red Alert: Command & Conquer

    Original title: the procedure entry point SMapLS_IP_EBP_12 could not be found in KERNEL32.dll dynamic link library.

    Ive been trying to install Red Alert: Command and Conquer on my new pc windows 7 and of course he will not play to come with all can't play because its running windows 6.1 and it's a single program of windows 95. then I went through all troubleshooting and change everything to make sure that it works and it actually installed, but when I went to play this message appears and im like why does this happen to me!

    The procedure entry point SMapLS_IP_EBP_12 be found in KERNEL32.dll dynamic link library.

    It of the message, can someone help me?

    Hi BigAl3000,

    Please note that Command & Conquer: Red Alert 3 is the only version compatible with Windows 7.

    Red Alert 2 and red alert are not compatible with Windows 7.

    See Windows 7 compatibility for Command & Conquer: Red Alert for more information.

    To troubleshoot program compatibility issues in Windows 7, try the following methods:

     

    Method 1: Open the program compatibility problems

     

    Most programs written for Windows Vista are also running Windows 7, but some older programs might run poorly or not at all. If an older program does not work, use the program compatibility issues to simulate the behavior of earlier versions of Windows.

    Method 2: Contact the program vendor or the hardware manufacturer

     

    Contact the program vendor for advice on how to solve the problem. In general, the software vendor's Web site provides a support section that you can use, for example, to search for an error message that you receive from the program.

    Hope this information helps.

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

    Original title: ntdll.dll error at boot fruity loops.

    get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

    Hello
    I suggest you contact support FL. I couldn't find all of the resources for this program.
    Eddie B.

  • Error starting NicPrefAdapterType@ACEnumNics@@QAEAAVCBytearray@@X2 be found in the dynamic link library athcfg2ou.dll. "

    Original title: meaning of the Error Message?

    I get the following message every time I open my Windows XP that mean? and how to fix it?  "The procedure entry point? "NicPrefAdapterType@ACEnumNics@@QAEAAVCBytearray@@X2 be found in the dynamic link library athcfg2ou.dll."

    Hi Peach14,

    ·         Have you made changes on the computer before this problem?

    Start the computer in safe mode and check if the problem persists.

    http://support.Microsoft.com/kb/315222

    If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After the clean boot for troubleshooting, return the computer to a Normal startupmode.

  • What the devil? Error: The procedure entry point? detac3@ListData@@QAEPAUData@1@XZ couldnot be found in QtCore4.dll dynamic link library.

    I hope I'm in the good topic section. My computer feezes. I restart or turn off & that is what happens.                                                                                       Error: The procedure entry point?  detac3@listData@@QAEPAUData@1@XZ not found in the QtCore4.dll dynamic link library.                                      He also does this whenever I turn on my computer, even if it does not freeze. I was told that I have to use my CD to get into windows XP, but I have no idea where I put it. What now? Oh, I'm computer illiterate, so stupid it upwards!

    Hi Budge3263,

    1. Did you the latest changes on the computer?
    2. You have security software installed on the computer?

    QtCore4.dll is part of the development environment for a number of applications, including Photoshop Elements.

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

Maybe you are looking for