"Error 1606 cannot access network location %APPDATA%\microsoft\windows\sendto" when access Adobe

Similar Questions

• Error 1606 could not access network location %APPDATA%\microsoft\windows\sendto when installing iTunes

  Original title: cannot install Itunes because of (Error 1606 could not access network location %AppData%).
  Please can someone help me?

  Hello

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry.

  The steps to correct this problem involve editing the Windows registry.

  WARNING: This method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the
  Register incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it.
  Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Method 1:

  a. Click Start and typeregedit into the search box start and press to enter.
  b. find the following registry key:
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\
  c. remove the entries that show the path that is listed in the error message.
  
  Method 2:

  Run Fixit from article mentioned below. It can fox the most problems with Error 1606.
  http://support.Microsoft.com/kb/886549

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Could not access network location %APPDATA%\microsoft\windows\sendto during the installation of QuickTime for iTunes

  I get an error message "could not access network location %APPDATA%\microsoft\windows\sendto" when I try to install iTunes.  It always happens during the installation of quicktime.

  Hello m.minton,

  You can watch the following information from Apple on the installation of QuickTime:
  http://support.Apple.com/kb/HT1926

  Please let us know if the information of Apple Help or if you still need help.

  Thank you

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• "Cannot install iTunes, error: not access network location %APPDATA%\microsoft\windows\sendto.

  Error: HELP.

  I tried to install Itunes on my laptop since 03:00 this afternoon. He repeats to me "could not access network location %APPDATA%\protector.exe. I tried all the shortcuts and the scannow process, but still nothing. It is very annoying. How can I fix it? (the windows version is vista Home premium)

  Hello

  Did you download and save iTunes on the desktop > then right-click > select run as administrator to install?

  If you don't have anything done, see if this information helps you.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  If the advice already given does not, please contact Apple for assistance.

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• problems with %APPDATA%\microsoft\windows\sendto when installing quicktime

  When installing quicktime or itunes 10 receive message "could not access network location % appdata%\. "have tried all itunes advice and tried to run as an administrator out of office

  Hi, try this FixIt:

  http://support.Microsoft.com/kb/2258121

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer? Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Title asks this.

  Why don't c:\users\attrib h 'All Users' changing the directory to all users so that it displays in the file Explorer?  Same thing with %APPDATA%\microsoft\windows\sendto and ProgramData directories?

  Thank you.

  Hello

  In Windows 7, the AllUsers folder is not a real file.

  It is a symbolic link that redirects to the C:\ProgramData folder.

  ProgramData is not hidden, by default.

  The correct syntax for the Attrib command would be,

  C:\>attrib h ProgramData

  You can view all files by going to the tab options\View Organize\Folder and research.

  In the section files and hidden files , place a check mark in the Show drives, folders and hidden files.

  Click Apply/OK.

  Concerning

• Drop-down menu SENDTO does not contain the same list as in the SENDTO folder in the User\Appdata\microsoft\windows\sendto folder.

  Prior to Win7 and Vista (seems to have the same problem), make a right click on a file would produce a drop down menu containing SENDTO containing various options like send this Word file, or write or Adobe or desktop (make a shortcut).  Other options of destination could be added by finding and opening the SENDTO folder and dragging shortcuts in there.  These added destinations would appear then in the menu drop down click the right button.  The feature doesn't seem to work in Win7.  The SENDTO drop contains the locations that are not in the SENDTO folder.  I've renamed the SENDTO folder to see what would happen.  Always in the same places appear in the menu dropdown.  It seems that Win7 has a situation he's going to other than the SENDTO folder.  Interestingly, I can add some program shortcuts in the SENDTO folder and they will appear in the drop-down list, others do not like the trash.  There are items in the drop-down menu are not in the SENDTO folder.  Help Help

  Click on the round of Windows (start), type shell: sendto and hit enter, add or remove shortcuts. Is it now behave properly?

  I forgot to post the location of SendTo folder, it's C:\Users\UserName\AppData\Roaming\Microsoft\Windows\SendTo

• ERROR 1606 cannot find the location of the network 0

  I am SO frustrated! I try to install the taxes of the State VA FRO H & R Block home. Whenever I do I get ERROR 1606. He can not find the network 0 location. I have Vista and have bought 2 registry cleaners and tried all of the suggestions online. I'm ready to scream!  Help!

  See if this Support Microsoft tutorial can help you.

  Error 1606: Could not access network location
  http://support.Microsoft.com/kb/886549

  It has a "Fix it for me" application and a "I'll fix it myself" instructions.

• Error: Cannot access %APPDATA%\microsoft\windows\sendto location when you try to install iTunes.

  Occurs when I try to install iTunes & Flashplayer.

  Help!

  Try this FixIt:

  http://support.Microsoft.com/kb/2258121/en-us

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I get "Could not access network %APPDATA%\microsoft\windows\sendto location" when I try to install iTunes

  I am trying to install the latest version of iTunes (10.2). I tried the whole registry thing, and that did not help at all. I had removed the previous version as well but that didn't do anything either.

  Hello

  Follow the information from apple to the link below

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  Also try the discussions of apple itunes

  http://discussions.Apple.com/category.jspa?categoryID=149

• Cannot install adobe reader software. I get error 1606 could not access network location %APPDATA%\protector.exe

  I have not been able to completely install the Adobe Reader or open pdf files. I'm getting Errorr code 1606 could not access network location %AppData%. I'm not that computer savy and don't know what is the right answer or suggestion should I take without seriously harming the computer. Quitr sure don't miss suggestion

  Hi TERESA-2009.

  (1) since when are you facing this problem?

  Method 1: You can follow the steps described in the article below that addresses this question

  You receive an "Error 1606" error message when you try to install or remove a program from Microsoft

  http://support.Microsoft.com/kb/886549

  (Article applies to Microsoft Programs, steps works great for other programs)

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  You can post your query on the Adobe Forums
  http://forums.Adobe.com/index.jspa

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Error 1606: Could not access network location % APPDATA%\.

  I am trying to install a game for Windows: Zoo Tycoon 2 Ultimate Collection (which is Zoo Tycoon 2 + 4 expansion packs), on a Vista Home SP2 machine.  When you install disc 1, I almost immediately get the error above,Error 1606: could not access network location % APPDATA%\. I looked at the error on this forum, who led me to the installation page for the installation package located manual download page offline at the: http://www.java.com/en/download/help/error_installshield.xml. When I tried to install the offline installation package, I got the same error, 1606.  I don't know what to do next?  This game comes without a product key, this support won't even take my call.  Thank you-

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  1. click on start, run, typeregedit in the Open box, and then click OK.

  2. look for the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  3 remove the entries that show the path that is listed in the error message.

  886549 KBhttp://support.microsoft.com/default.aspx/kb/886549: Regedit open again. In the left pane, click User Shell Folders, point tonew, click expandable string value, type the value name that you want to restore (AppData) and then press ENTER. Right click on this value, clickchange, type the value in the value data for the value name box, and then clickOK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

  Good luck. Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message 1606 could not access network location%AppData%\

  Whenever I try to play a game of cards on yahoo or pogo that he told me that I have to update my java. so I uninstalled the version I had. went on java.com and tried to redownload it. It goes through the process then says Error 1606 could not access network location%appdata%\. I checked the registry thing and everything fits to what he says, he should be. All the other things I could try. This is getting very frustrating. I even restored my computer to an earlier date, hoping it would help. but it does not. I even tried using another browser. I had internet Explorer 7. then it installed automatically internet explorer 9, when he came out. I thought that maybe that was the problem. so I downloaded google chrome. but it does the same thing. I have Windows vista. Please help, thanks, jen

  Hello

  Method 1:

  You can consult the following wire link and check if it helps.

  Error 1606 on Java

  Note: The above mentioned link thread contains third party links.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Method 2:

  You can also create a new administrator user account and check.

  Create a new user account

  If you are not faced with the question in a new user account, then you can view the following link to resolve a corrupted user profile.
  Difficulty of a corrupted user profile

• Not able to install any updates for my computer Error 1606 could not access network location % APPDATA%\. How can I fix it?

  I can't install any updates for my computer at all, even the window updates is one of the many error messages I receive, Error 1606 could access the location %APPDATA%\ network. How can I fix it?

  Hello

  This problem occurs because there is incorrect entries in the Shell folder of the user who is logged on to Microsoft Windows. When Windows Installer goes to the sale of Shell folder of the user who is logged on to the computer, Windows Installer cannot locate the correct entry. The solution is inhttp://support.microsoft.com/default.aspx/kb/886549.

  The steps to correct this problem involve editing the Windows registry.

  WARNING:

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk. I suggest that you first back up your registry as follows: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry.

  Here are the steps to fix it.

  Step 1:

  a. Click Start, click Run, type ""regedit ' in the Open box, and then click OK. "

  b. find the following registry key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell dossiers\

  c. remove the entries that show the path that is listed in the error message.

  Step 2:

  886549 KB http://support.microsoft.com/default.aspx/kb/886549:

  Open Regedit a. once again. In the left pane, click User Shell Folders, point to new, click expandable string value.

  b. type the value name that you want to restore (AppData), and then press ENTER.

  c. right-click on this value, click modify, type the value in the value data for the value name box and then click OK. The value data must be: % USERPROFILE%\AppData\Roaming.

  Step 8 KB 886549 suggests that you also check the values in HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders. However, by fixing my problem, I had not to change values in the registry key. If this does not work, follow ALL the steps in the referenced article.

• Error 1606. Could not access network location %APPDATA%\protector.exe

  Whenever I try to install itunes on my computer, I get a pop up that says "Error 1606 could not access network location %AppData%, I can't figure out what to do, I went through the whole" go to start, click on run, run Regedit.exe, go to HKEY_CURRENT_USER--> Software--> Microsoft--> Windows--> the current Version--> explore--> User Shell Folders and ive made sure everythings it and all its how its supposed to be. ' " I have no idea what to do. If anyone knows how to fix it please do not hesitate to post something.

  Thanks to anyone who helps

  Tjballer94

  Run the FixIt from this page:

  http://support.Microsoft.com/kb/2258121

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/