Error 1606 when trying to install Quicken 2011
I am trying to install Quicken 2011 and receive the error message 1606. Can seem to get around it. Any ideas?
Hi MoodyMTm,
Follow the steps described in the article below, which deals with a similar question
You receive an "Error 1606" error message when you try to install or remove a program from Microsoft
http://support.Microsoft.com/kb/886549
(The article applies to the Microsoft program, steps applies to other programs as well)
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
How to back up and restore the registry in Windows
Tags: Windows
Similar Questions
-
Error 1606 when trying to install printer drivers
Error 1606 still unsolved!
After going through the process of setting Error 1606 in:
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00041455&LC=en&DLC=en&cc=us
I got stuck in step 11. When I press OK, I got the error message that says this:
Error editing Cannont value change Common AppData: error writing to the new content value.
Why have I not this message? What is the problem with my computer?
After going through the process of setting Error 1606 in:
http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00041455&LC=en&DLC=en&cc=us
I got stuck in step 11. When I press OK, I got the error message that says this:
Error editing Cannont value change Common AppData: error writing to the new content value.
Why have I not this message? What is the problem with my computer?
Hey tokidoky
The notice in your link is hp tips to solve an error during the installation of the printer drivers on aMicrosoft Windows XP-based computer
Here is the vista forums
There is a link to hp customer service in this web address you posted here to contact you
Walter, the time zone traveller
-
Error 1606 when trying to install open office.
Already tried to fix it on the support web site. Wizard completed successfully & restarted the computer. Still did not work. Still getting Error 1606.
http://www.oooforum.org/forum/viewforum.phtml?f=1
"The program installation and troubleshooting.
Try asking in the Forums Open Office.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: context: MSI Action failed
Hello: I received the 0xC0070643 error code when trying to install the AVG anti-virus program. What can I do to fix this problem, so I have AVG on my computer? I thank really all those who are knowledgeable enough to help me straighten out it.
Thanks again
Daphna
Hello
1. are you able to install other applications successfully?According to my research, this error message appears if you have traces of a previous installation of the AVG software.Download the AVG remover to remove the previous version and then try the installation again and check.
http://www.Avg.com/us-en/utilitiesThe link below also discuss the matter even.
http://forums.Avg.com/au-en/AVG-Free-Forum?sec=thread&Act=show&ID=114995Hope this helps -
get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)
http://www.Microsoft.com/downloads/en/default.aspx
Put the KB numbers in the search at the above link > manual download them.
If this does not solve it:
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Original title: error code 88982F04
Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error." I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC. Can someone please help with an answer.
Thank you
Delete C:\$WINDOWS.~BT
Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.
If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.
If you find it difficult to do some of the steps below, please see instructions how do their:
If you encounter an error about enough space to perform the upgrade, see the instructions:
How to install Windows 10 on devices with limited space
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to: 10 tips before installing Windows 10
- How to: 10 things to do if the Windows 10 install fails.
Retry the upgrade manually:
Option 1: Using the media creation tool
Download the media creation tool
Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.
Note: How to check if you are downloaded or installed the update Windows 10 November
Select upgrade this PC now and then click Next
Option 2: upgrade using the file ISO for Windows 10.
Task of pre-required
When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1
- How to back up and restore your files manually
- How to free up disk space in Windows
- How to: 10 tips before installing Windows 10
then
- How to download official Windows 10 ISO files
- How to: upgrade previous versions of Windows using the file ISO for Windows 10
then
- Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
- Reboot several times, and then try again.
- Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
- If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
- Support your default BIOS reset BIOS.
- Check if there BIOS updates available for your system, and then to apply them.
- If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
- Perform a clean boot, restart, and then try again.
- If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
- If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
- If this does not work, try using the. ISO file to upgrade if possible.
- If you are connected to a domain, go to a local account.
-
Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?
-
Exit code 7 and error 1603 when trying to install acrobat pro DC.
Exit code 7 and error 1603 when trying to install acrobat pro DC. What's wrong? I run windows 7.
Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs
Error 1603. Install | CS5 products: http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html
-
Receive the error code: 1606 when trying to install the program
I received an Error 1606 times before and went through the process of editing the registry, and it solved the problem I had. However, now when I try to install the 2008 edition of turbo tax I get a different error message 1606. But when I go into the registry, all entries are fine, they harmonize perfectly with the entries in the table provided by Microsoft.
How can I solve this problem, if solutions are not even necessary?
It's the exact error message I receive:
ApplicationController: MSI install Exception occurred: Microsoft Installer error: 1606, with error code: 1606
Hi Kisuru,
1 - is the first time that you install Turbo tax on the computer?
2 are you able to install other programs on the computer?By searching on the site of TurboTax, I found a solution for the error message that you have already tried as you mentioned.
Error 1606: Could not access network location
http://TurboTax.Intuit.com/support/kb/installing/errors/7164.htmlI suggest that you download and install the utility windows install cleanup then start the cleaning utility in the start menu and then to delete the entries for the software, and then restart the computer for the changes to take effect and now try to reinstall the software and check.
Description of the Windows Installer Cleanup utility
http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exeFor extra support try posting your query in the community forums Turbo tax.
https://TtlC.Intuit.com/app/full_pageI hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
I received an Error 1606 times before and went through the process of editing the registry, and it solved the problem I had. However, now when I try to install the 2008 edition of turbo tax I get a different error message 1606. But when I go into the registry, all entries are fine, they harmonize perfectly with the entries in the table provided by Microsoft.
How can I solve this problem, if solutions are not even necessary?
It's the exact error message I receive:
ApplicationController: MSI install Exception occurred: Microsoft Installer error: 1606, with error code: 1606
This is the recovery and repair of Vista Forum.
http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads
They will help you with your question when you repost in the Forum programs Vista at the above address.
See you soon.
Mick Murphy - Microsoft partner
-
Error 646 when trying to install updates
Original title: error 646
When you try to download updates it allows updates to day run but unable to install, read error646
HelloWhat updates you trying to install?If it's in what concerns Microsoft Office updates, refer to the article below to solve the problem.Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates. (Click on fixit)
http://support.Microsoft.com/kb/2258121
Aziz Nadeem - Microsoft Support[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]
-
When you try to install labview 2011 or 2012 on a windows machine 7, I get a message "setup.exe has stopped working". I tried to run setup.exe as an administrator with the same results. I have Microsoft .NET Framework installed on the affected machine 4.5.1. Could be the cause of this problem? Or does anyone know the root cause of this error?
Hi - are you getting it at the beginning of installation, during or after 100% progression ended?
Is it fair to LabVIEW you install, or is it drivers too, in this case, what was the last big package that has been installed at the time?
This can be caused by the NVIDIA chipset driver:
https://decibel.NI.com/content/message/46299?TSTART=-130
Thank you
Sacha -
643 and 646 error codes when tried to install extract
Original title: security updates for Vista and MS Office
I have 19 updates of security that will not be installed. Ten are for MS office 2003, 1 for MS Vista NET Framework 1.1 SP1, and 8 are for MS Office 2007. I keep getting error 646 and 643 codes. I ran the .NET Framework (fix it for me) program automatic (delayed start) the value of the service (Office Source Engine) and then started it. These security updates are not installed. I have auto update installed and started running regularly. I started seeing this problem in June 2010 and have not been able to solve. Could you please help me?
Hi DJMac129,
We recommend that you run Microsoft fix it in the next article, and then try to install the updates.
See code error '0 x 80070646', '646', or '1606' when you try to install the Office updatesVery important: Modifying the registry incorrectly will cause serious damage to the computer. Back up the registry until you make changes.
See how to backup the registryVisit our Microsoft answers feedback Forum and let us know what you think.
-
Error 646 when trying to install windows updates
I try to install 2288613 Ko, Ko 2293428 and KB 2291595 KB 979906. If I try to install them one at a time or all together they all fail with the error code 646.
Help!
Things are easier to answer when they're repeated enough on the forums. ;-)(Even easier when the posters give some details about the details of their problem.)
Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
http://support.Microsoft.com/kb/2258121Also easier to find, you might think. ;-)
--
Martin Stanley
MS - MVP
--
How to ask Questions the Smart way
http://www.CatB.org/~ESR/FAQs/smart-questions.html -
error 0x8080CBB1 when trying to install Windows Xp
I tried to install Windows Xp when all of a sudden a blue screen with error message "IRQL_NOT_LESS_OR_EQUAL" with the code STOP: 0x0000000A (0x00000002, 0x00000000, 0 x 00000065, 0x8080CBB1) rises and impossible to complete the installation.
Hello
This problem may occur if there is incompatible hardware or an incompatible device on your computer driver.
Refer to this article for help:
Error message "Stop 0x0000000A Irql_Not_Less_or_Equal ' during the upgrade to Windows XP
http://support.Microsoft.com/kb/311564See also:
You receive an error message "Stop 0x0000000A" in Windows XP
http://support.Microsoft.com/kb/314063Kind regards
Afzal Taher
Microsoft technical support engineer
Maybe you are looking for
-
Variable zoom in tabs separated from the same site
Nice day I need to be able to have a zoom different setting for labels separate on the same site. So far, all the addons found zoom ive only set zoom preset according to the site rather than the individual tab. Any help on this? Thank you!
-
Bluetooth does not work on my Satellite L750/114
I have a latitude L750/114. Features say it has bluetooth 3.0 HS.I tried to activate it, but I can't. If I press Fn + F8 does not appear the Bluetooth option. In the installer there is no option to enable / disable this option.Thank you
-
ReadyNas NV + unable to communicate via Raidar/Frontview V1
Several weeks ago my NV + V1 began to file my network, finally disappear completely. When I reboot the device that all four LEDs are lit in green, stays in power button turned on, the lights of the port eithernet correctly, and the display shows a va
-
Try to install the Seagate Plus backup. Seagate is problem of Windows XP. Error message says 'pending Reboot Validator'. Seagate is Windows problem. Nothing fancy about this PC. No Nero, no games, no music, no video. If anyone has any ideas on
-
After scanning updates, cannot display showing necessary page updates.
I manually search for updates on the windows update site. Once the scan is complete, does not display the page list of the necessary updates, as appropriate.