Error-17600 [LV2010 & TS2010]

Similar Questions

• Stupid or Smart error in LV2010 bar plot?

  A new feature for LV2009/LV2010 is error bar plot. But I have the following problems for this new and I was wondering if someone can help me to solve it:

  1: I can't directly copy error bar plot in ppt or word file.

  2: I can first export of the plot of bar of error in an image file, then import it into the ppt/Word file, but a big problem, it's the plot legends are lost. The legends of the plot are essential to a conspiracy which several cureves information. and I can't find a way to solve it.

  Grateful if someone can give me some solutions how can I copy/import the plots including the legends of tracing error bar in a ppt/Word file. Thank you

  Alex

  You can use the Get Image and save it to .png (.gif or .jpg):

  EDIT: Note that, because of the way extracts work, the code snippet included a control reference. You can simply create the method directly from the command by right-clicking and selecting create-> node invoke-> get Image.

• LabVIEW executable with my VirtualBench

  Hello

  32-bit Teststand 2014

  32-bit Labview 2015.

  VirtualBench model NI VB-8012

  I created a Labview VI using the screws of VirtualBench. This VI takes a measure of voltage with the DMM.

  I created a file of sequence in Teststand. This file of sequence called the VI as the limit of Test to verify if the measure is included.

  I created a Labview graphical user interface, which calls the sequence file.

  I'm able to run my VI, sequence and GUI. It all works and I am able to make my measurement of the tension of the VirtualBench.

  Now, I want to make an executable for the end user. I have trouble with the VirtualBench during an executable. I created a project in labview and my GUI with the llb GUI has been added to the project. I built my executable and tried to run. The tracks of MISTLETOE, however, once I click on start to run my sequence file, I am prompted with an error (see attachment). The VI VirtualBench works normally, but not as an executable... Please help.

  Thank you

  After working with the support OR an answer has been found.

  I finished my executable running in debug mode. While the code worked, I was able to get an ERR(-17600) to my attached error message error code. They gave me the link below to try to solve my problem and it worked.

  http://digital.NI.com/public.nsf/allkb/9C9EE3A6F7695AB9862578F0006CBF0E

  Solution:
  Follow these steps to correct the error-17600 (sometimes the error-18002)

  1. Once you have generated your personalized user interface, TestExec.exe, open the project file in the LabVIEW Project Explorer and right click on the .exe file.
  2. Click Properties in the context window that appears.
  3. Click on the category of settings of the Source file on the left.
  4. Click any screws that you have added to the original project (under project at downtown records) and check the box to Rename this file during the generation and the beginning of the text add "UI_".
  5. Under project files, and then click the option of dependencies .
  6. Check the box to apply the prefix for all content items and add "UI_" in the text box.
  7. Build the project.

  Thank you all for your time and help

• build LV2010 Installer error

  Hello

  I use LV2010 32 bit, vision tools, database tools, Win7 64-bit.

  I get the following error when I Isaiah to compile a Setup program.  The executable file is based without any problem only the installation program:

  CodeSignAPI.lvlib:Get signature String.vi error
  Error: The time stamp authority URL specified does not point to a valid authority timestamp server or an unknown error has occurred.

  «"" "String of full appeal:»»"»
  CodeSignAPI.lvlib:Get signature String.vi error
  CodeSignAPI.lvlibign with Certificate.vi
  IB_MSI.lvclassign_Setup.vi
  IB_MSI.lvclass:build.VI
  CDK_Engine_Main.VI
  CDK_Build_Invoke.VI
  CDK_Build_Invoke.VI.ProxyCaller

  Loading information of product deployment
   
  **************
  Requested abort.
  **************
  Error details:
  **************
   
  Loading information of product deployment
  Adding files to install
  Validation of...
  Copying files...
  Analysis of the files...
  Updating files...
  Build completed successfully.
  Makes adding files
  Preparing to build the deployment
  Copy of the products of distributions
  Deployment of building
  Copy of the configuration files
  Merged configuration database information
  Definition of product information
  Information for the developer settings part
  Final construction of departure
  Validation of...
  Copying files...
  Analysis of the files...
  Updating files...
  Creating a merged database...
  Creating the Installer files...
  Build completed successfully.
  Copy of the additional installation files
  Compression of the files in the installer
  Deployment of the completed building

  Although the error message clearly indicate that there is something wrong with the section "Windows Security" of specifications you Installer, try to delete the settings in this section and see if it is created correctly, then if she doesn't know where to dig.

  Good luck

• 17600 Runtime error code

  Hello

  I get an annoying runtime error when you try to run my sequence file.

  the error is:

  Unable to load the 'T:\ATE\TS-e-Detect\e-Detect CAT2 Status.vi' VI in the version of "13.0.1f5" LabVIEW runtime engine

  (I've also attached a picture of the full error)

  I've never seen this before and I'm at a bit of a loss as to how to fix this!

  I am uing LabVIEW 2013 verssion 13.0.1f5.

  The screw that calls the sequence file are published as a source distribution and located on my server, what I see under all the screws have been added at the distribution of sourse was built.

  Did anyone had this problem before and able to point me in the right direction?

  Any help is greatly appreciated!

  Thanks for watching!

  Iain

  I found what was causing my problem.

  Some of the screws that have been published related to the various bodies or screw SPI.

  I deleted all references to these screws of my project and then Redid the links and redid my source distribution.

  Took forever to get out, but I got there in the end!

• LV2010 build request: error 1498 for LV class default Value.vi

  I am creating an application (exe) with LabVIEW 2010 Professional Development System SP1 (32-bit) file. The operating system is Windows 7 Professional (64 bit). Unfortunately I get this error when I click on "build specifications/New/Application (EXE):"

  

  Here is the full error message

  Possible reasons:

  LabVIEW: Library has errors. Correct the errors before performing this operation.

  «"" "String of full appeal:»»"»
  Download LV class by default Value.vi
  AB_UI_Initialize_Framework.VI
  AB_UI_FRAMEWORK.VI
  AB_CreateNewWizard_Invoke_CORE.VI

  EBUIP_CreateNewWizard_Invoke.VI
  EBUIP_CreateNewWizard_Invoke.VI.ProxyCaller

  LabVIEW has tried to load the class in this path:
  C:\Program Files (x 86) \National Instruments\LabVIEW 2010\vi.lib\AppBuilder\AB_Classes\Build\UI\AB_UI_Frmwk_Build.lvclass

  The file is definitely available.

  Well, this is also the code :-)

  

  Do you know what happens? I guess that one cannot not so complicated to create an executable file. I'm doing something wrong?

  Thank you, Nick

  Hmmm you could try doing a repair of LabVIEW. Go to start > Control Panel > add and remove programs > National Instruments > modify (repair) LabVIEW. This will go through and make sure it has the correct paths to the request of the manufacturer. Let me know if it works

• Cannot load a required step of associates module Err :-17600

  the deployment of that image works fine in the dev system.

  but the deployment system "failed to load a required step of associates module Err :-17600" this error.

  I suspect it has to do with search folders.

  where I can change into a deployment machine the research file settings.

  Well, I tried a sample project (simple), but it worked on the maschine deployment.

  2. I use the classes & objects in my seq file. (I tried to take all precautions to play safe)

  There was a windows DLL missing in my deplyoment maschine 'msvcr100d.dll '.

  OR support helped me thr that I didn't have labview on my machine of deployment.

  & Dev maschine, everything was OK

• error message "missing resource file imaqdx.rc.

  With the help of LV2010, returned to a PC that has been used for a while access to some old programs of vision. On the block diagram, the property IMAQDX node is disconnected and when loading the file, I get a message that says: "lack of resource file imaqdx.rc.

  Suggestions?

  For anyone following this discussion, I have solved the error message, but only by removing all related AND then put it back. A major PITA!

• #NoValidation TS2010

  Hello world

  "#NoValidation" works fine in TS2012, but not on TS2010.  I got an error: "#" will cause a runtime error.

  Is "#NoValidation" available on TS2010?

  Thank you

  FRN

  Hi FRNs,

  It seems that the expression of #NoValidation is a new feature added to TestStand 2012. It is listed as an improvement of language Expression in aid of 2012 TestStand, link below:

  TestStand 2012 New features: http://zone.ni.com/reference/en-XX/help/370052K-01/tshelp/infotopics/2012whatsnew/#analyzer

• Bug LV2011 - error wired to Boolean function breaks during the recording of the previous version

  I just download LabVIEW 2011 this morning. I created this VI and recorded for LV2010 see how he would deal with it. I opened the VI in LabVIEW 2010SP1 and the thread of the error is broken. There is no warning about the problems in recording this VI under an earlier version.

  

  
  

• Analysis of chain for the chips to generate errors

  Hello!

  I program who receive channels of the ports series, split into 2 separate strings and write in separate tables. Everything is fine, but sometimes Scan string for chips generates strange values.

  For example: if I send strings like this:

  23.14 67.00

  23.18 68.00

  23.18 66.00

  and after the separation, I'm getting values such as:

  23.14, 8, 23.18

  67.00, 0, 66.00

  It sometimes seems that last figure is increased.

  Here's my VI

  (data in "serial port" are correct)

  

  And output values:

  

  I guess it might be something with delays, because if I'm reducing the time of waiting inside the loop, the errors appear more often. If so, are there any other (quicker) way to split a string into two? I already checked search/Split string with offset adjustment, but it did not help.

  (I use LV2010)

  Yep, use the termination character.  I was in a hurry so don't quite understand why.

• -1074360266 error to IMAQdx Open Camera.vi

  Hello

  We have problems with our LabView vision system; the VI is able to "run" with an intact arrow, but there is an error that appears:

  "Error - 1074360266 occurred to IMAQdx Open Camera.vi" with a possible reason of "NEITHER-IMAQdx: (Hex 0xBFF69036) Impossible to reach for the driver in kernel mode.

  For a little history, we had initially scheduled the VI in LV2009 (where it worked fine), but the customer upgraded to LV2010 (where it now comes up with this error), so it would be logical that it has anything to do with the problem.  In addition, we use two cameras Basler A601f via Firewire connections, which both are recognized by the Basler pylon Viewer software, so we're pretty certain that it's only a problem of LabView.

  We have tried to reinstall the drivers of Acquisition of Vision software, but it does not solve the problem, so we gradually loss.

  Any help or pointers are appreciated, and I apologize in advance if I've left out any relevant information.  Thank you.

  --

  Ben

  Ben,

  Are you able to find the camera and get him to the MAX?  Also, what version of IMAQdx you have installed?  Driver versions are MAX on the software tab.  Because all this happened after an upgrade to a new version of LabVIEW, I suggest to re - install device drivers CD, then reinstall the software of Acquisition of Vision.  I would like to know how this happens.

• VI has an error of type 1002288.

  Build on Windows XP with SP1 LV2010 and Vision Development Module 2011. Deployment on Windows 7 64 bit with NI-IMAQ 4.5 amd computer 5.0 visa as well as the execution of vision environment.

  I was getting an error that refers to a missing vi. I checked "save settings for all of the contained elements" under file source settings under build properties.

  The target machine has been running a previous version of this software which is a colluege (he left and he stays with me). So I don't think that there is a compatibility issue. Did I miss a frame of construction? I have no idea what means this error.

  The problem seems to be because everything is running OK on the local computer that has all the software installed locally.

  There are two possible solutions:

  -a problem of LENGTH:

  If you use the NI Vision Development Module, you must have execution NI VISION, you have to pay.

  -a promblem camera:

  I you use a camera of National Instruments, the runtime is integrated in the drivers and it's free but if it's not a camera OR, sometimes you have to paid license Runtime IEE 1394.

  A. Kaszubiak

• LV2010 WebService Crash on Windows XP

  How to plant the webservice LV2010 XP:

  Installation to "hello world" Web service called for example "CCM", create a binding URL for example called "getdata"

  This binding must be linked to a VI called getdata.vi.

  In other words a web service that must respond to the URL:

  http://127.0.0.1/CJC/GetData?test

  In Internet explore, call the Web service by typing the URL:

  http://127.0.0.1/CJC/GetData.VI?test

  to be sure:

  http://127.0.0.1/CJC/GetData?test

  This will crash the webservice, showing attached dialog box. Next time you try to deploy the same webservice, a name of user and password dialog box apears. Restart the Application OR web srever can work (Run:services.msc). But at least once, I saw that not work, after which I had to run misblast.exe and spend the majority of my morning resettlement LabVIEW to get back on the right track.

  P.S. If you type "http://127.0.0.1/cjc/getdata1?test", you get the expected 404 not found err.

  Hi Soren,

  I was able to reproduce the crash you describe, and I produced it to the 256559 to request corrective measures.  Because this particular accident has an easy workaround solution I don't expect to be addressed in 2010 SP1.  I would also like to point out to this accident happen that you must not only include the ".vi 'extension for the web method, but you must also use'?' as a separator of your query.  When you use the end method for your VI and you use "/" to separate your query instead of "?", you will receive a 404 not found error.

  Please let me know your thoughts.

• slow and timeout error

  Hello forum members

  I wrote a program in LV2010 and works very well except for one last question.

  The program works very slowly and sometimes shows error timeout. In the program, I send a voltage to Keithley 2400 and simultaneously measure the current Keithley 2400 and 2000. I sweep the voltage using a while loop. I have not used buffer.

  Your help would be very appreciated.

  Thank you.

  Pradeep

  A few things I noticed:

  1. You should not mix GPIB and VISA to speak to the same instrument.  You should just use the entry VISA to send your order.  But if there is a VI later in driver for the 2400 set the voltage from the source, you should use that.
  2. If you insist on the construction of your own SCPI command to set the voltage of the source, make sure that the command structure is correct.  You may need to add a semicolon or an end of line at the end of the command character.  That's what I suspect causes the header not defined error.
  3. Really, you should add a delay between voltage and then perform readings.
  4. I don't like the idea of allowing the two different screws communicates on the same bus at the same time.  I've seen some strange things with GPIB.  You should sequence a little more so that you adjust the tension, wait 500ms (round number to allow things to sort out and the bus to talk to nice), read the voltage of the 2400, read the current 2000.
  5. Your back measures seem to me.  I usually use the 2400 (source meter) at a voltage of the source and read the current, then read the voltage to the unit under test with the 2000 (DMM).