error-18004 in 2016 TestStand

Similar Questions

• 10 Windows update failure, get update error code 0x800057(2016-01-06-T-07-57-00p)

  Computer Dell laptop os Win 7 Pro.  Tried to install Win 10, final msg has been install failure.

  Error Msg.  computer needs to be repaired.

  After talking to win the Office of response I have

  has been advised to run a windows update issues/fr. link

  This has produced two points.  updated error code 0x800057(2016-01-06-T-07-57-00p)

  MSG saying registration service missing or damaged.

  This computer has been renovated by a refurb under license. Co. Ltd.

  Device provided with original COS and original identification code and a second COS, a second identification code.

  any suggestions on the t?

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Error-18004; Access to the DLL of the LabVIEW Run-Time Error engine. TS 4.2.1 / LV 2010

  When I try to run a VI that is reentrant in an execution at the same time, I get this error.  The details of the error is: LabVIEW: the method or property is not supported in this version of LabVIEW.

  This is performed under the LV 2010 Simple operator Interface.  The TestStand engine is version 4.2.1 with runtime adapter 2010 LV.

  If I save to an earlier version to LV 2009 SP1, then assign the adapter TS 9.0.1 (2009 SP1), it works.

  Can anyone reproduce this error (bug?)?

  you have the latest updates for TestStand using LabVIEW 2010?

  http://digital.NI.com/public.nsf/allkb/7D728B70F167CE088625776E00582C7B?OpenDocument

• SeqEdit.m error, impossible to use TestStand

  Hello

  I recently installed TestStand 2012, then SP1.

  As soon as I try to create a sequence editor next pop step appears. Help please.

  "Error occurred while trying update the control panel"SeqEdit.m ":

  Could not load file or assembly ' stdole, Version 7.0.3300.0 =. Culture = neutral, public key token = b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the specified file. "

  

  I did a repair and TestStand now works. I didn't think that the kind of things can happen on a new intall.

• error code - 40 in teststand deployment

  I just got a new laptop and installed all the products NOR including TestStand I had in my old laptop. Using the same deployment file I had on the old laptop, I run the deployment utility and get the following errors.  What I am doing wrong? :

  From newspapers.
  Done processing environment file
  Analysis completed
  Building...
  15:34
  An installer is being created.
  Loading information of product deployment
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, the information on the source of product 'NOR DataFinder Destop Edition' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\NI, Destop DataFinder edition {7D5297CE-E2B6-458C-91F4-47F674A94A8F} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, the information on the source of product 'NOR DataFinder' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\NI DataFinder {D6B1E623-A952-421A-9C50-1958A056C63B} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, the information on the source of product 'NOR DIAdem' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\NI tiara {2C52C774-1B40-4848-95EF-735D22EF9203} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, the information on the source of product 'NOR DIAdem' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\NI tiara {3CB2BF3F-9C33-477B-8D99-251491541ED1} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem, get information on the source of product 'SignalExpress Steps' distribution
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\SignalExpress steps {84172037-613A-4B72-B797-E36C04BA5D17} .xml
   
   
  **************
  Error: Internal error. (Error code - 40)
  There was a problem obtaining information on distribution product source 'SignalExpress_App '.
  Final report of the error
  **************
   
   
  WARNING *.
  Deployment information of a product not identified to jump because the-40 error code occurred while loading file: C:\Program NIUninstaller Instruments\Shared\MDF\Manifests\SignalExpress_App {8169D9AA-A2DE-4EA0-BF27-2E7D1CF52D87} .xml
   
  Adding files to install
  Makes adding files
  Preparing to build the deployment
  Copy of the products of distributions
  Deployment of building
  Copy of the configuration files
  Merged configuration database information
  Definition of product information
  Information for the developer settings part
  Final construction of departure
   
  **************
  Internal error: A tool or the library returned an error. (Error code - 21)
  Error messages
  Error: Party to the path "c:\documents and settings\all users\application data\national instruments\mdf\productcache\ni c interface to labview [1.0.1]\lvcinterface\lvcinterface.msi" was registered by 2 products: "NI LabVIEW C Interface" and "NI LabVIEW C Interface.

  Final report of the error
  **************
   
  Deployment of the completed building
  Internal error code-21 a Setup program is being created.
  The Setup is completed
  Construction is completed
  15:35
  Abandoned

  HPatel,

  I found more information about your error code.

  When you generate a deployment, you have the option to cache information about the installation additional programs that include you in your deployment, if you do not have to insert the disc every time.  This error code means that the deployment utility is looking for cached information to add to your additional installers, but it is not.  Clear all your records of cache (C:\Program NIUninstaller Instruments\Shared\ProductCache or C:\Documents and Settings\All Users\Application Data\National Instruments\MDF\ProductCache) and build again.  The deployment utility must ask any disk must be added to the installer, and it will create a new cache.

• How to fix the error of Labview 2016 (32-bit) on Windows 10 database.

  Hello

  I have software to read/write of labview (32-bit) database, which works fine on windows xp 2000 / 7 (64-bit). But it is not stable 10 (64-bit) Windows at all.  It pops up an error on most of the time. Please see the attached database VI. After starting my software, usually, there is no error on the face of the database of frist. but it pops up an error when opening the database section. the East-2147418113 error code. It seems that it will be more stable if I put more than a few seconds before you open the second database.

  Could someone help me understand how to solve this problem?  Enjoy.

  Steven

  
  

• Security update 2016-002 could not be verified

  I am running Yosemite 10.10.5.  Was invited this afternoon to install updated system "Security Update 2016-002.  He made a download of 461 MB and then forced a reboot.  After reboot, the update carried out for a few seconds, and then suddenly ended with a pop up that says the downloaded update could not be verified.  Here is the line of the error: "Security Update 2016-002 could not be verified.  It may have been damaged or corrupted during the download.  "Click Update to download and check again the update.  I've done three times.  The update failed every time, the same reason in the error message.  This update is passed through QA?  Any ideas on that?

  I too have this problem. I'm running OS X 10.9.5.  Whenever I tried to install the new update, I said that "a security update 2016-002 cannot be verified," etc.  I tried to go into safe mode and I am still unable to install the update.

  All solutions?

• Strange timing errors, python process taking CPU

  I have 5 Server freshly moved on top of Yosemite.

  I migrated Server 3 to 4 and now 5.  My sites all done.  My e-mail service is very good.

  I've never used the calendar service, and used to spam my system with Dingo errors log in Server 4.   I thought it would be fine in the Server 5 because 5 fixed issues for many in the nets here.

  Not for me.  So I tried to turn it on.   I get this error in the calendar error log:

  2016-02-14 22:45:25-0600 [---] (port UNIX ' / var/run/caldavd/caldavd.sock' closed)

  2016-02-14 22:46:20-0600 [---] open journal.

  2016-02-14 22:46:20-0600 [---] ControlSocket go from ' / var/run/caldavd/caldavd.sock'

  2016-02-14 22:46:22-0600 [-] [txdav.base.datastore.subpostgres #error] unable to connect to database schema creation: Broken pipe [Errno [32]

  2016-02-14 22:46:23-0600 [-] [txdav.base.datastore.subpostgres #critical] cannot start or connect to the postgres: md5 password authentication failed

  2016-02-14 22:46:23-0600 [---] (port UNIX ' / var/run/caldavd/caldavd.sock' closed)

  Is it possible that I can delete calendar and let app Server make it fresh?  I will lose no data because I've never used.

  During this time, my server otherwise happy is stuck using 9% CPU for several treatments Python and postgres continue taking up 100% CPU when I look up there.   How can I go back factory calendar?

  The caldavd_setup.log is trivial and seems that everything worked until the end.

  14 February 19:53:50 [CalendarServerCommonSetup] successful Serveradmin

  14 February 19:53:50 [CalendarServerCommonSetup] call fix-permissions

  14 February 19:53:50 [CalendarServerCommonSetup] calling calendarserver_upgrade - postprocess

  14 February 19:54:01 [CalendarServerCommonSetup] out of calendarserver_upgrade: 2016-02-14 19:53:53-0600 Converting augments.xml

  2016-02-14 19:53:53-0600 root ACL:

  2016-02-14 19:53:53-0600 Nav ACL:

  Created the directory: / var/run/caldavd_requests

  2016-02-14 19:53:58-0600 cannot connect to database schema creation: Broken pipe [Errno [32]

  2016-02-14 19:53:59-0600 may not start or connect to the postgres: md5 password authentication failed

  Failed to start the service.

  14 February 19:54:01 [CalendarServerCommonSetup] send to serveradmin: calendar: command = exportPushCertificates

  14 February 19:54:01 [CalendarServerCommonSetup] output: calendar: exported = 'Yes '.

  14 February 19:54:01 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.agent

  14 February 19:54:01 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:01 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.relocate

  14 February 19:54:02 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:02 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/usr/sbin/serverctl enable service = org.calendarserver.archive

  14 February 19:54:02 [CalendarServerCommonSetup] output: {}

  }

  14 February 19:54:02 [CalendarServerCommonSetup] run: / bin/launchctl start org.calendarserver.agent

  14 February 19:54:02 [CalendarServerCommonSetup] performance: /Applications/Server.app/Contents/ServerRoot/Library/CalendarServer/Setup/Calen darServerLogRotationConf

  14 February 19:54:02 [CalendarServerCommonSetup] Service has not been activated previously

  14 February 19:54:02 [CalendarServerCommonSetup] out successfully

• I want to force a sequence to fail on an error, but also a failure

  I want to force a sequence to fail on an error, but also a failure.  It came because the only way I can find to stop the dialogues of Labview error to arise in TestStand is to use the property to ignore errors of time run on a step. I don't want these dialogues to occur because operators do not know how to deal with them. The problem with using the property to ignore Run Time Error, it now is a step that had a runtime error will not kill the sequence. I really want to interpret a mistake as a failure.

  I found a link to this same question years ago and the answer seems reasonable.  See http://forums.ni.com/t5/NI-TestStand/Force-TestStand-Step-to-Fail-When-Error-Occurs/td-p/435510.

  In this post, I found the following: "use the SequenceFilePostStepRuntimeError callback sequence. In this sequence, set Parameters.Step.Result.Status = 'Fail' and Parameters.Step.Result.PassFail = False ". But when I pull up the reminder SequenceFilePostStepRuntimeError, niether of these parameters have on the list of parameters. I have Parameters.Step and Parameters.Result, but nothing filled under these broad categories.  I don't know if I have a Setup error, or if the reminder has been changed over the years.

  Someone at - it advice?

  Thank you

  Dave

  Put a breakpoint in your sequence a little after the step and check the runstate variables to see if they match. This post was made in 2006 and there are a lot of changes since then. Adding in the breakpoint should allow you to see what variables are created at run time, as the passfail. You can then enter in the browser of the expression. When chacking the statement, you will get a warning saying that the syntax may be incorrect, but it's nice. It is also said in this post if you know what you are doing to the variable may be created when running and you will be fine.

• Change the parameter Prototype of a Module DLL TestStand Programmaticaly

  Hello.

  I started this post inside the LabWindows, but there was no response.

  Hope I can get help here.

  Please see the following link

  http://forums.NI.com/NI/board/message?board.ID=180&message.ID=46129&query.ID=804485#M46129

  Thanks in advance.

  Hi Doug.

  I'm sorry for the delay.

  Here is how I solved the problem: I changed the module of the BCI to the DLL module.

  Here is a sample of my code:

  I changed CVIModuleGetParameters() and CVIParametersGetItem() to TS_DllModuleGetParameters() and TS_DllParametersGetItem and now it works fine.
  seqContextCVI = object reference ThisContext
  __declspec(dllexport) __stdcall GetControlarParameters (CAObjHandle seqContext) Sub
  {
  error int = 0;
  ErrMsg errMsg = {'\0'};
  ERRORINFO errorInfo.
  char strItemLabel2 [1024] = "";
  Step CAObjHandle = 0;
  CAObjHandle seqFile = 0;
  Module CAObjHandle = 0;
  Parameters CAObjHandle = 0;
  Parameter CAObjHandle = 0;

  tsErrChk (TS_SeqContextGetStep (seqContext, & errorInfo, &step));))
  tsErrChk (TS_StepGetModule (stage, & errorInfo & module));
  tsErrChk (TS_DllModuleGetParameters (module, & errorInfo & settings));
  tsErrChk (TS_DllParametersGetItem (parameters, & errorInfo, CA_VariantInt (1) & parameter));
  sprintf (strItemLabel2, "\"%s\"", "TEST" ");
  tsErrChk (TS_CommonCParameterSetValueExpr (parameter, & errorInfo, strItemLabel2));

  NOTE: After make a change to a stage you must mark the file, as amended by
  increment the number of changes to the file. It is also necessary for the change to show
  upwards in the sequence editor immediately.
  tsErrChk (TS_SeqContextGetSequenceFile (seqContext, & errorInfo, seqFile));
  tsErrChk (TS_SeqFileIncChangeCount (seqFile & errorInfo));

  Error:

  CA_DiscardObjHandle (Step);
  CA_DiscardObjHandle (seqFile);
  CA_DiscardObjHandle (module);
  CA_DiscardObjHandle (Parameters);
  CA_DiscardObjHandle (Parameter);

  If an error occurs, set the error indicator causes an error of execution at TestStand.
  If (error<>

  TS_SetStepError (seqContext, error, error);
  }

  Thanks for all the help.

  My best regards.

• [Problem] Can't get TS_EngineCommitGlobalsToDisk to work (TestStand 3.5)...

  I CVI DLL function that displays a Panel for the operator values entered.  I then store in a StationGlobal structure.  It seems that the actual ini file is not updated unless complete you the sequence.  If end, he does she not get the latest version of the memory of the StationGlobals.  I found the function TS_EngineCommitGlobalsToDisk and added the following works for my DLL so I call after the Panel closed:

  void CommitInformation (int promptOnSaveConflicts,
  CAObjHandle seqContextCVI,
  char * reportText;
  short * errorOccurred.
  long * errorCode,.
  Char errorMsg [1024])
  {
  error int = 0;
  ERRORINFO errorInfo.
  ErrMsg errMsg = {'\0'};
   
  tsErrChk (TS_EngineCommitGlobalsToDisk (seqContextCVI & errorInfo, promptOnSaveConflicts (VBOOL)));
   
  Error:
  If an error occurs, set the error indicator causes an error of execution at TestStand.
  If (errorInfo.wCode<>
  {
  * errorOccurred = TRUE;
  * error code = errorInfo.wCode;
  sprintf (errorMsg,
  "Source: %s\n"
  "Description: %s\n"
  errorInfo.source,
  errorInfo.description);
  }
  }

  Now, when you run 'error' contains a considerable number of negative, but errorInfo does contain no errors.  Also, the StationGlobals are not saved.  What I am doing wrong?

  The fixed.  Kind of off the coast.  I removed the feature from the CVI DLL and used a step of the ActiveX/COM in TestStand and called the CommitGlobalsToDisk from there!

• Update SP2 from 2003 to 2008 Std - update, due to lack of InstallWindows:Error Type = 3211266

  Hello

  Really struggling with an upgrade from 2003 SP2 Std 2008, it's a PC that is inherited. Installation goes completely to 100% then says failed and will return in 2003 again.

  Logfile below. -anyone any ideas please? and thanks for looking.

  2016-04-14 18:43:56, error [0x08081e] MIG could not load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 18:48:31, [0x08071d] MIG CDownlevelOCStore::GetOCCollection error, failed to load C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man. : Class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 18:48:43, error [0x08081e] MIG could not load manifest to C:\$WINDOWS.~BT\Sources\dlmanifests\errorreportingfaults-dl.man: class UnBCL::XmlException: hResult = 0 x 0 = 2 line, Position = 134; .
  void __thiscall UnBCL::XmlDocument:Load(class_UnBCL::String_*)

  2016-04-14 19:07:49, error [0x06015d] IBS EnumVdsDisksCallback: found the disk with an invalid name. [gle = 0x000036b7]
  2016-04-14 19:08:01, error [0x06015d] IBS EnumVdsDisksCallback: found the disk with an invalid name. [gle = 0x000036b7]
  2016-04-14 19:22:53, error [0 x 080792] MIG COCEventTracing::COCEventTracing call failed StartTrace 87. [gle = 0 x 00000057]
  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\AutoEnrollment [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:28, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\Application\Tlntsvr [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\DfsSvc [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [EventMessageFile]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 19:27:29, error [0x0802b6] MIG could not create object: HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SYSTEM\CurrentControlSet\Services\Eventlog\System\SCardSvr [TypesSupported]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:13:49, error [0x0802b6] MIG could not create object: HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:13:49, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\EventPublisher.EventPublisher\CurVer []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\InternetShortcut\shell]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\InternetShortcut\shell\print\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell\print\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:26, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\InternetShortcut\shell\printto\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shell\printto\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [] HKLM\SOFTWARE\Classes\InternetShortcut\shellex\ContextMenuHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8}. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shellex\ContextMenuHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8} []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:26, error [0x0802b6] MIG could not create object: [] HKLM\SOFTWARE\Classes\InternetShortcut\shellex\PropertySheetHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8}. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\InternetShortcut\shellex\PropertySheetHandlers\ {FBF23B40-E3F0-101B-8488-00AA003E56F8} []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.application\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xaml\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xbap\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\DefaultIcon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\DefaultIcon []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:43, error [0x0802b2] MIG could replace not subject: [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\shell\open\command]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\SOFTWARE\Classes\SystemFileAssociations\.xps\shell\open\command []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:15:54, error [0x0802b6] MIG could not create object: [HKLM\SOFTWARE\Classes\XML\OLEScript]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\SOFTWARE\Classes\XML\OLEScript []], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [comdlg32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [comdlg32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [imagehlp]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [imagehlp]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [lz32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [lz32]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [oleaut32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [oleaut32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecli32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecli32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecnv32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olecnv32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olesvr32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [olesvr32]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [shell32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [shell32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [url]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [url]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [urlmon]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [urlmon]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [version]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [version]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wininet]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wininet]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b2] MIG could not replace object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wldap32]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip, delete the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wldap32]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Delete(struct_Mig::IMigLocation_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64cpu]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening the registry entry [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64cpu]], which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:19:41, error [0x0802b6] MIG could not create object: HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64win]. Mig::Win32ErrorException exception class: Win32ErrorException: Error (0), Skip opening [HKLM\System\CurrentControlSet\Control\Session Manager\KnownDLLs [wow64win]] registry entry, which is protected by WRP...
  void __thiscall Mig::CRegistryDataStore:Create(class_Mig::CDataUnit_*)

  2016-04-14 20:22:01, error [0x08030a] MIG MigDoMigration caught exception: class UnBCL::ArgumentOutOfRangeException: startIndex and rank value.
  __thiscall UnBCL::String:String(const_unsigned_short_*,int,int)
  [gle = 0x000003f0]

  ______________________________

  Other end of log file

  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. E:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. F:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. G:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. H:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, info [0 x 080658] MIG nothing to clean. I:\$INPLACE.~TR\Machine does not exist
  2016-04-14 20:22:16, stop Info [0 x 080279] complete MIG of the file system manager in place.
  2016-04-14 20:22:16, mapping of information [0x0803e6] removal of MIG for HKLM
  2016-04-14 20:22:16, info [0x0803e7] MIG successfully unmapped HKLM
  2016-04-14 20:22:16, mapping Info [0x0803e6] removal of MIG for HKU
  2016-04-14 20:22:16, info [0x0803e7] MIG successfully unmapped HKU
  2016-04-14 20:22:16, the analysis service of information [0 x 080487] MIG destroying BONE
  2016-04-14 20:22:16, the analysis of information [0 x 080488] destroyed MIG OS service
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xc08].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x3f0].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xdb4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xe68].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xe5c].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xcdc].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xcd4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xeec].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0xef0] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0 x 348].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xa40].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xbe4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 220] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x90c].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 870] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xdf4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0 x 924] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0xbc4].
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: ThreadID = [0x1ac] output.
  2016-04-14 20:22:16, MIG MigHost info: CMigPluginSurrogate::COMGenericThreadingHostThreadProc: exit ThreadID = [0x92c].
  2016-04-14 20:22:16, COutOfProcPluginFactory::FreeSurrogateHost MIG Info: stopping.
  2016-04-14 20:22:16, MigHost MIG Info: process exit.
  2016-04-14 20:22:16, Info [0x0804ae] MIG CMigWorkingDirHelper: removal of C:\$UPGRADE.~OS\OnlineUpgradeApplyWork working directory
  2016-04-14 20:22:16, method of information leaving MigShutDown
  2016-04-14 20:22:16, info [0x08008d] MIG migrate: Finish (0)
  2016-04-14 20:22:16, WARNING [0x08076e] MIG UpgApply: (C:\$UPGRADE.~OS\OnlineUpgradeStore) restore did not complete successfully
  2016-04-14 20:22:16, info [0x08059e] MIG leaving Callback_ApplyNewSysMachineSpecific (failure)
  2016-04-14 20:22:16, PublishCriticalError MIG Info: Windows Setup has encountered an error and cannot continue.  Your computer will now reboot and your previous version of Windows is restored.
  2016-04-14 20:22:16, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2016-04-14 20:22:16, current user interface pages and destination Info [0x0a013e] are the same. Judgment of navigation.
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070042]: called with the notification of error published by ErrorHandler
  2016-04-14 20:45:12, info [0x0a0023] run UI ProgressInfo\SendDiagnostics task: StartProgress
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info: Phase = 4 start time was 0X30D2073BA, end time was 0X30D208448, total was 0X108E
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070044]: startSetupTimeInSecs = 0X30D2072BA
  2016-04-14 20:45:12, info [0 x 070045] DIAG diagnosis treatment given to the 2016-04-14 20:45:12
  2016-04-14 20:45:12, CallBack_DiagnosticDataSend DIAG Info [0 x 070046]: endSetupTimeInSecs = 0X30D209258
  2016-04-14 20:45:12, DIAG CallBack_DiagnosticDataSend info: setupInstallTime = 0X1F9E
  2016-04-14 20:45:12, DIAG CallBack_DiagnosticDataSend info: the user is NOT ACCREDITED-IN M² and Watson.
  2016-04-14 20:45:12, info [0x0a0024] run UI ProgressInfo\SendDiagnostics task: EndProgress
  2016-04-14 20:45:12, info [0 x 090095] PANTHR called WdsExitImmediate!  The execution stops and the queue will not be saved.
  2016 04-14 20:45:12, info [0x09008c] PANTHR SeqExecute - stop, since WdsExitImmediate() has been called
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: SkuAssembly (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MigTestPlugin (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ErrorHandler (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MountDev (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: internal (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: BootIni (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CopyPrivates (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CreatePageFile (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: completion (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: RestartModule (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ParseCommandLine (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineSettings (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: WpeUntndBtstrp (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ModuleLoader (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Ems (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DiskInformation (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: license (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: LanguagePack (SEQ1)
  2016-04-14 20:45:12, info [0x0605a6] IBS requested UI to hide pages selection of language and regional settings.
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: space (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: locale (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineUI (SEQ1)
  2016-04-14 20:45:12, CallbackWin32UITerminate of the user interface of information: deleted WizardUI
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Cmi (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Sysprep (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ProductKey (SEQ1)
  2016-04-14 20:45:12, IBS Info [0x06010d] Module_Term_Productkey: the valid product key in the table, see the property hide the value.
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: CBS (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DynamicUpdate (SEQ1)
  2016-04-14 20:45:12, info [0x0500bd] of THE Module_Term_DU called
  2016-04-14 20:45:12, info [0 x 050081] of THE WaitAndCleanUp of THE...
  2016-04-14 20:45:12, info [0x0500a1] OF THE fact with THE... DUMgr cleaning
  2016-04-14 20:45:12, info [0 x 050082] with WaitAndCleanUp BECAUSE of THE...
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: LogTime (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Unattend (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: UnattendImgInstall (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CFGOfflineImage (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ExternalDrivers (SEQ1)
  2016-04-14 20:45:12, info [0 x 090062] PANTHR destroying module: module IBS PnP (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: SystemRestore (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ConfigSet (SEQ1)
  2016-04-14 20:45:12, info [0 x 090062] PANTHR destroying module: Source (SEQ1) media module
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Imaging (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: MSDCleanup (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: CopySetupFiles (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: ComputerName (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: ScenarioDetect (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: engine (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: compliance (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: diagnosis (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: BootPrep (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: DiskConfig (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: TempDrive (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: FixBBPaths (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: FirstBootCleanup (SEQ1)
  2016-04-14 20:45:12, module Info [0 x 090062] PANTHR destroy: Rollback (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: UpgDriver (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: PrepareInstallDrive (SEQ1)
  2016-04-14 20:45:12, module to destroy the PANTHR Info [0 x 090062]: OnlineProgress (SEQ1)
  2016-04-14 20:45:12, info [0 x 090081] PANTHR destroying any source not cited modules! (SEQ6)
  2016-04-14 20:45:12, info [0x0601d7] IBS InstallWindows:Error Type = 3211266
  2016-04-14 20:45:15, info [0 x 090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• 10 improvement of the way Windows Installer error then get the updates. ' FATAL: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability

  Hello community. I get the following error for 10 Windows Installer to upgrade. It gets stuck he display of 0% to get updates. What happens whenever I ran the media creation Tool.exe file in my computer. Someone out there has experienced this problem and found a solution? Thank you in advance. Should I disable the Antivirus and Smart Firewall Norton Security? Thank you.

  FATAL: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability

  It's the whole error line:

  2016-07-26 15:13:42:134 2992 200 Agent WARNING: has no rule Installed, updateId = {F9164872-3E27-4410-B4FC-038814549BB1}.105, hr = 80070490
  2016-07-26 15:13:59:978 2992 200 FATAL Manager: UH: 0 x 80070490: EvaluateApplicability failed in CCbs::EvaluateApplicability

  Try to upgrade manually:

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

• Impossible to upgrade Edition Vista Home premium to Windows 7 Home premium. I get an error type of 3211266.

  Yes, I know, I'm a little late.  Vista works fine on my PC and now some third-party vendors are abandoning support of this platform, so I'll try to upgrade to Windows 7 to get a mileage more than my PC until I have to replace it.  I ran the Windows 7 Upgrade Advisor and he said I could upgrade to Windows 7 Home Premium.  It works fine for a few hours, then stops in a few words about the 75% mark in the part "Transfer files, settings and programs" of the upgrade and I get the message - "the installation cannot continue.  "Your computer will now reboot and that your previous version of Windows will be restored.  The good news is that the restoration has worked flawlessly.

  I saw the setupact.log file and note these messages (in bold & underlined characters):

  2016-05-30 10:58:13, info MIG transformation of security model for upgrade...
  2016-05-30 10:58:13, info MIG SceSetupSystemByInfName questioned with success the number of cycles (483)
  2016-05-30 10:58:14, AsyncCallback_SysprepStatus MIG of information: status: 0
  2016-05-30 10:58:23, Callback_NewSysCmiUpgradeSecurity MIG error [0 x 080815]: error in SceSetupSystemByInfName model treatment upgrade (1208) [gle = 0x000003e5]
  2016-05-30 10:58:23, PublishCriticalError MIG Info: Setup cannot continue. Your computer will now reboot and your previous version of Windows is restored.
  2016-05-30 10:58:23, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2016-05-30 10:58:23, current user interface pages and destination Info [0x0a013e] are the same. Judgment of navigation.
  2016-05-30 10:59:51, CallBack_DiagnosticDataSend DIAG Info [0 x 070042]: called with the notification of error published by ErrorHandler
  2016-05-30 10:59:51, info [0x0a0023] run UI ProgressInfo\SendDiagnostics task: StartProgress
  2016-05-30 10:59:51, DiagnosticDataSendWorker DIAG Info: Phase = 4 start time was 0X30D5CF248, end time was 0X30D5CF477, total was 0X22F
  2016-05-30 10:59:51, DiagnosticDataSendWorker DIAG Info [0 x 070044]: startSetupTimeInSecs = 0X30D5C9197
  2016-05-30 10:59:51, info [0 x 070045] DIAG diagnosis treatment given to the 2016-05-30 10:59:51
  2016-05-30 10:59:51, DiagnosticDataSendWorker DIAG Info [0 x 070046]: endSetupTimeInSecs = 0X30D5CAE27
  2016-05-30 10:59:51, DIAG DiagnosticDataSendWorker info: setupInstallTime = 0X1C90
  2016-05-30 10:59:51, DIAG DiagnosticDataSendWorker info: the user is NOT ACCREDITED-IN M² and Watson.
  2016-05-30 10:59:51, info [0x0a0024] run UI ProgressInfo\SendDiagnostics task: EndProgress
  2016-05-30 10:59:51, AsyncCallback_DiagnosticsSendStatus MIG of information: status: 0
  2016-05-30 10:59:51, MIG AsyncCallback_DiagnosticsSendStatus info: no information available courses
  2016-05-30 10:59:51, info [0 x 090095] PANTHR called WdsExitImmediate!  The execution stops and the queue will not be saved.
  2016-05-30 10:59:51, info [0x09008c] PANTHR SeqExecute - stop, since WdsExitImmediate() has been called
  2016-05-30 10:59:51, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-05-30 10:59:51, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-05-30 10:59:51, info [0 x 090086] PANTHR pWorkerThreadFunc - stop
  2016-05-30 10:59:51, PANTHR DeleteCriticalSection info to pExecQueue-> csLock;
  2016-05-30 10:59:51, info [0x0500bd] of THE Module_Term_DU called
  2016-05-30 10:59:51, info [0 x 050081] of THE WaitAndCleanUp of THE...
  2016-05-30 10:59:51, info [0x0500a1] OF THE fact with THE... DUMgr cleaning
  2016-05-30 10:59:51, info [0 x 050082] with WaitAndCleanUp BECAUSE of THE...
  2016-05-30 10:59:51, info UI CallbackWin32UITerminate: removed WizardUI
  2016-05-30 10:59:51, info [0x0605a6] IBS requested UI to hide pages selection of language and regional settings.
  2016-05-30 10:59:51, Module_Term_Productkey IBS Info [0x06010d]: the valid product key in the table, see the property hide the value.
  2016-05-30 10:59:52, info [0 x 090081] PANTHR destroying any source not cited modules! (SEQ6)
  2016-05-30 10:59:52, info [0x0601d7] IBS InstallWindows:Error Type = 3211266
  2016-05-30 10:59:52, info [0 x 090009] PANTHR CBlackboard::Close: c:\windows\panther\setupinfo.

  I'm puzzled.  I looked in the forum for this error and did not find the same upgrade scenario that I am experiencing.  All advice is appreciated.  Thank you.

  Hi Tom,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not upgrade to Windows 7.

  I suggest you to refer to the suggestions by Andre Da Costa MVP responded on December 12, 2009 and check if that helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/upgrade-from-Vista-to-Win7-wont-complete/e2b6ecf6-C980-4006-81cb-ddd1b5ec108a

  Warning: Antivirus software helps protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you have to temporarily disable it to install other software and/or any relevant issue, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks by malicious software.

  You can also check:

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7-custom#T1=tab01

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Windows update error 8007005 DX

  Update error 8007005 DX (2016-02-21-T-01_18_40P

  How can I fix?

  Thank you.

  After you have entered here the possible solution error code is composed as follows by microsoft:

  Error code 0 x 80070005 is also described as 'ACCESS DENIED'. It happens usually when you have the permissions of file or registry that are required to install the updated (because the file or registry permissions can be changed by malware, we recommend that you are investigating anti-malware after repairing permissions).

  To resolve this problem, make sure that you are logged on as administrator and install updates again. If the problem persists, use the SubInACL tool to repair the permissions of files and registry. To do this, follow these steps:

  1. Download the SubInACL tool and install it in the folder % windir%\system32. The placeholder % windir % represents the Windows system folder. For example, C:\Windows.
  2. Start Notepad, and then copy and paste the following commands:
     off @echo
     Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f/Grant = system = f
     Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f/Grant = system = f
     Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f/Grant = system = f
     Subinacl /subdirectories % windir % / Grant = administrators = f/Grant = system = f
     @Echo =========================
     Completed @Echo.
     @Echo =========================
     @pause
  3. Save the file as reset.cmd.
  4. Right-click the Reset.cmd file in file Explorer (in Windows 8.1 and Windows 8) or Windows Explorer (in Windows 7 and Windows Vista) and then click Run as administrator. In Windows XP, double-click the file in Windows Explorer.
  5. Wait for execution and then try to install the update again.

  Note refer to Possible delivers everything using the SubInAcl tool if you receive errors during execution of SubInAcl.