error-200077 when you deploy the SysDef file

Similar Questions

• Code error-301 when you deploy the image

  Hello
  I have a problem.

  I want to deploy an image from a client light t5740e to a client t610.

  I cloned successfully of the image to a folder as a file .ibr deposit.
  I also have an older version of the image as a file on a FTP repository .img.

  I can successfully deploy the image the FTP repository to a t610 client.
  The problem is that this image is obsolete and cannot be used.

  When tryng to deploy the image to a file repository shared, I get the following error code:
  2013-04-22 11:38:47 ErrorCode:-301, error information: the device of the faimly bios is not match the image.

  I also tried to create an image using HP ThinState Capture, but recevie the following error during startup:

  Inititializing... * ERROR * system has failed the OS image.

  After that, I downloaded the standard image on the HP site and created a USB key. Then I replaced the .ibr file, but it still gives me the same error as ThinState installation.

  Is there a way to bypass the repository of shared folder and clone the image to the FTP repository under a .img file and deploy it to the client t610?

  Or is it possible to bypass the BIOS checking when deploying the repository of shared folder?

  Assuming that the version HPDM is common (4.5 with SP2), there is an option in the task editor when applying the deployment to enable Cross-platform for Imaging.

  This is however strongly discouraged because the picture you shot of the t5470e will not have the necessary drivers for the t610. The original image on the web site of HP will have drivers for both, but the part of the RunOnce scripts at first start after imaging USB is clean the unnecessary drivers by the platform to maximize space on the device.

  However, you should be able to pull the image of 7th WES using the FTP browser component in menu HPDM model. This will generate a model that can be deployed to clients light t5740e both t610.

  One last thing to remember is to make sure that the agent is updated on the device target before deployment and then again after the deployment.

• 0x88982F60 error code when you open the image file in Windows 7

  I have a TIFF file that does not completely open and gives me the error code of 0x88982F60. I looked briefly on the web and basically, it's a bad image file or an image file that the WIC in Windows 7 can not or does not open. Question: is there a solution for this problem without going to the source image?

  Hello
  Welcome to the Microsoft answers site

  You will not be able to repair a tiff file corrupted with Photo Gallery.

  If the file is corrupted, we won't be able to fix it.
   
  It may be useful
  Thanks and greetings
  Support Microsoft-dieng
  Visit our Microsoft answers feedback Forum and let us know what you think
  http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/

• R12.2.5 Installation on OL 7.1 ERROR: RW-50010: error:-script returned an error: 1 RW-50004: error code when you run the external process.  Check the log file for more details

  I tried to install EBS 12.2.5 on OL 7.1 with rapidwiz and got this error when applying the unique patches in second File System

  "Second system logfile file - /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log.

  LOG FILE:

  _____________________________________________________________________________________________________________________________

  Step 0-8

  Command: /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh

  Step 4 of 8: UNIX making pretreatment

  Running: chmod 777/db/oracle/OraInventory r

  chmod-r 777/db/oracle/OraInventory succeeded

  Step 4 of 8

  Performance: known appltest - c "/ app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/adrunfmw.sh".

  PHASE of INSTALLATION has BEGUN: APPS TECH STACK: Wed Dec 2 17:27:07 IST 2015

  runProcess_1

  StatusString installation of Applications Technology Stack

  Copy the temp area models

  Inventory name is: app_oracle_TEST_fs2_Oracle_EBS_app

  One-time fixes copy to temp area

  Remove JDK_TOP: / app/oracle/TEST/fs2/EBSapps/comn/util/jdk32 if there is

  / App/oracle/TEST/fs2/EBSapps/comn/util/jdk32 deleted directory

  Installation of WebLogic Server.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWLS.xml oracle.apps.fnd.txk.config.InstallService

  WebLogic Server successfully installed

  Web Tier utility installation.

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instWeb.xml oracle.apps.fnd.txk.config.InstallService

  Level successfully installed Web utilities

  Registration EBSUsing /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instEBS.xml oracle.apps.fnd.txk.config.InstallService

  EBS registered successfully

  Rename/home/appltest/bea/beahomelist in /home/appltest/bea/beahomelist.29266 to avoid problems during WLS

  patching

  / Home/appltest/Bea/beahomelist renamed successfully.

  Application of ad hoc patches

  With the help of /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml

  L'exécution de commande : /stageR12/startCD/Disk1/rapidwiz/jre/Linux_x64/1.6.0/bin/java -cp /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd /... /j11067592_fnd.zip:/app/Oracle/test/FS2/inst/Apps/TEST_ebs122/Temp/ASInstallHome/FND/Java/3rdparty/stdalone/xmlparserv2.zip-Doracle.apps.fnd.txk.env_home=/app/oracle/TEST/fs2/EBSapps/appl/admin/TEST_ebs122/-Doracle.apps.fnd.txk.runtime.config=/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/xmldocs/instASpatches.xml oracle.apps.fnd.txk.config.InstallService

  Fatal error: T2K install Service

  oracle.apps.fnd.txk.config.ProcessStateException: OPatch process failed: Output = 1 see log for more details. CMD = perl /app/oracle/TEST/fs2/FMW_Home/webtier/OPatch/opatch.pl apply - verbose - silent - ocmrf /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/ASInstallHome/fnd/admin/template/txkForms_ocm.rsp jdk - / app/oracle/TEST/fs2/FMW_Home/webtier/jdk/app/oracle/TEST/fs2/inst/apps/TEST_ebs122/temp/patches/7695070/7695070

  at oracle.apps.fnd.txk.config.OPatchActionNode.processState(OPatchActionNode.java:312)

  at oracle.apps.fnd.txk.config.PatchActionNode.processState(PatchActionNode.java:187)

  at oracle.apps.fnd.txk.config.PatchNode.processState(PatchNode.java:338)

  at oracle.apps.fnd.txk.config.PatchesNode.processState(PatchesNode.java:79)

  at oracle.apps.fnd.txk.config.InstallNode.processState(InstallNode.java:68)

  at oracle.apps.fnd.txk.config.TXKTopology.traverse(TXKTopology.java:594)

  at oracle.apps.fnd.txk.config.InstallService.doInvoke(InstallService.java:224)

  at oracle.apps.fnd.txk.config.InstallService.invoke(InstallService.java:237)

  at oracle.apps.fnd.txk.config.InstallService.main(InstallService.java:291)

  Can not install the unique patches

  RW-50010: error:-script returned an error: 1

  RW-50004: Error Code when you run the external process.  Check the log file for more details.

  
  

  It was recorded in /app/oracle/TEST/fs2/inst/apps/TEST_ebs122/logs/12021641.log and I don't know how to find another newspaper for such details as mentioned in this journal. Please help me with that.

  
  

  Concerning

  KasunA
  

  Found a workaround.  The problem is that, before the 7695070 patch is applied, the installation program backup directory/apps/fs2/FMW_Home/webtier/jdk in /apps/fs2/FMW_Home/webtier/jdk_backup_existing_version, but then it clears. / jdk - the patch fails because it can't find it.  I had to rename the directory of the jdk for jdk2, and as soon as it gets deleted quickly and rename jdk2 jdk.  Then he applies the patches without problem.  A symbolic link would do the same thing.

• HP color laserjet 2605 Error error restart when you print the document

  HP color laserjet 2605 error restart when you print the document, please give me a solution?

  Apparently, there are no other problems to format, I was forced to replace it with a new one, finally hp color laserjet 2605 printer I had to walk normally.

  I hope that the discussion can be useful for each of them, thank you

• Is it possible when you save the psd file to put an automatic jpg file saved at the same time?

  My job is to prepare images for print viewers and window facilities.  My clients need to approve in advance the photos before printing.

  I generally save my psd files, but because the files are very large in this format I usually save another copy in a jpg file which has a much smaller file size.  This makes it possible for me to add to a presentation and and send them to my client.

  Is possible when you save the psd file to put an automatic jpg file saved at the same time?  Or that I always have to do it manually?

  Use the Image Processor in Photoshop or install the free Dr. Brown Services.

• 'disk error' when you open the pdf file

  Hello, lately I'm having this problem with Photoshop CC:

  When you open a pdf file I get the message: "could not complete your request because of a disk error."

  What is the best way to get rid of the problem?

  Thank you

  I had the same problem.

  I solved it to manually restore default preference files.

  https://helpx.Adobe.com/Photoshop/using/preferences.html

• "File not found" error message when you save the document

  Hello

  Oddly enough, whenever I click on 'save' in CS6, it opens a window "save under", (which shouldn't happen), then I click on save witht the existing file name (he said then the doc exist already), I click on OK, (and then on OK to the next popup window) do get the message "file not found".  I have to click on 'ok' and the document is not saved.  I tried to register differently in previous versions, and it still does not work.  I recorded a video of this behavior. You can see here - http://screencast.com/t/W1GYK0zsrk

  Why would he try to find a file?  Looks like an error message when you try to open a doc, does not save a doc.

  Help, please!  I can't stop my station until I get the document to save.

  Yes, Mohit1233 - happened with each file yesterday. Finally, I closed the doc (make me lose my job requires), then restarted my computer and now, that problem has disappeared. I work on a PC (HP);

  Barblove - I tried to do that yesterday (copy and paste into a new doc) and still nothing. I also tried to copy the work in a CS3 doc (but got an error message).

• Error PPBM5 when you run the vbscript - old hurt return file

  Hello

  After following all the instructions of PPBM5 to the letter, I received this error message when you finally run the Script of "statistics":

  Line: 121

  Char: 1

  Error: Overflow: ' [number: 1 + 99]'.

  Code: 800A 0006

  Source: Microsoft VBScript runtime error

  I spent a lot of time digging in the old, even markets found some about this same problem with PPBM4 (http://forums.adobe.com/message/2819090#2819090) but nothing works.

  Anyboby have any idea?

  Very appreciated

  I received your data and I suggest that you rerun the test rendering of the timeline with MPE material on. Your current score is not properly may be damaged due to deleting all the files preview. The rest of the scores are perfectly acceptable, so no need to revive that once again.

• Error message when you add the account to TimeMachine

  Hello

  I get the error in system.log when I enter my account information to access a drive for time machine below

  System.log:Feb 14 11:31:04 iMac - 5 K sandboxd [133] ([25623]): kcproxy (25623) political system: deny /Library/Keychains/System.keychain file-writing-untie

  The above error appears when you use access Keychani to run the add-in, when I use the route of the control panel to add I get a slightly different error

  System.log:Feb 14 11:19:12 sandboxd iMac - 5 K [133] ([465]): writeconfig (465) political system: deny /Library/Keychains/System.keychain file-writing-untie

  So it seems to be a sandbox configuration problem?

  Keith

  What functional problem you have, if any? Log messages are not a problem in itself.

• I get this new error message when you change the properties of generation for an installer in LV2011sp1. - anyone know what it is?

  I built this front Installer. But I think that this is the first time since the upgrade to SP1. Now when I look at just the proerties for Installer build (I have yet to change), I get this error message when I hit the OK button.

  If I select No., it just stops. If I select YES, it seems to go ok. But I have not tried to build a new installer again.

  Anyone know what it is?

  Photo of the message is attached.

  I find it always useful to publish at least part of the error in your post, while others in the future may seek and find the answer.

  I think that you will be able to correct the error by clicking on the option of additional installers on the left pane, and then click OK to save the build.

  You probably asked to point the installer on some files that were missing since the upgrade.  I think that this occurs when the version of something on your computer changes, but the installer doesn't seem to know other installers until you visit the dialog box.  It would be brutal trying to replicate, but I met the same problem before.

• Error message when you try to download files - WINDOWS SECURITY, these files cannot be opened. Your internet security settings prevented one or more files being opened.

  Original title: C:\windows\system32\icacls.exe
  For the last few days I tried to download the different elements as well as download Trend Micro security/antivirus protection.  Whenever I do; try to download something or download something, I get the following error:

  WINDOWS SECURITY, these files cannot be opened.  Your internet security settings prevented one or more files being opened.
  C:\windows\system32\icacls\exe

  I have not found anything within windows security who would do this and when I get this error C:\... it just on my screen flashes, then disappears.

  Any suggestions?  I really need to download Trend Micro.

  Thank you
  Amy

  See the article below:

  ID of the KB Article: 2588679.

  Error message when you try to open some files in Windows 7: "your Internet security settings prevented one or more files being opened." http://support.Microsoft.com/kb/2588679

  Check the following settings:

  Right-click on the downloaded file. Select Properties.
  Click the Unlock button.

  Check the suggestions the following threads:
  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/ab6de772-CE20-4621-88ce-5ae568369826

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/these-files-cant-be-opened-your-Internet-Security/7bbe6bc9-d89f-4407-81fa-ea4c24b39aaf

  Let us know if that helps.

• Error message when you use the menu buttons in IE but not chrome

  Hello.

  My recently transferred website has a problem when you use the menu anywhere on the site in Internet Explorer, but not on my mac using chrome? I get this error message came up on top of the screen which takes three clicks to go MuseJSAssert: error calling the function switch: TypeError: object does not support property or method . So, if I click on anything else it pop ups again. Any ideas how to get rid of this? I tried to re - download files from muse, but the same phenomenon occurs. I tried to download the files in a folder of exported frm different muse I saw had worked for someone else on here, but no difference? Any help much appreciated.

  Website: vanletteringco.com

  You might get an error that iPage are sorting when opening too, just remove the /root1 in the address bar to see the site?

  Thank you

  GAV

  Gavin,

  Using Jotforms should ideally create not the questions here. Did you try reseating Jotforms code? I suggest you to get a charge of Jotforms code and then try to insert it to test.

  Kind regards

  Sachin

• problems to capture the audio layer when you import the m2ts files

  Hi all, I'm new on the side of the entire video editing and so would be grateful for the help.

  I just bought a camcorder Canon HF200 HD, and a Sony Vaio notebook that came with Premiere Elements 7.0 preinstalled.

  Last month I've been shooting sequences and down just to try to change everything and set up a DVD.

  The problem I have right now (and I've just started using the program, so everything is new for me) is that while I seem to be able to import the m2ts file format in which my camera records, only the video is imported by first - no audio (it reads the file ok, no errors appear, but when I go to review images there is video but no sound).

  I can play all my videos in Windows Media Player very well, both video and audio.  So it seems that my machine is able to read the files correctly in this program.  However, it seems that the audio drop out when I import the file in first.  The program was pre-installed on my computer and when I have a look at the audio settings, it doesn't seem to be a possibility to change the settings to something different.

  So far, I've spent a long time googling and trying to find a solution, but without any joy immediately.

  Enjoy the anyone can offer any assistance.  Is it just a simple setting I need to change?  Or I have to somehow convert the files in a different format before Elements 7.0 can read?

  Thank you.

  Jeff

  the machine I have appear to be consistent with the specifications required by PE7 (and given that it came with pre-installed PE7 which should be the case).

  There are two things to consider:

  1.) edition of most of the images, especially material to SD

  2.) editing AVCHD, currently the most demanding of all popular video formats to edit. That's what you have.

  Now when you launch the pre, you get a splash screen. There you can open new create a new project, open an existing project that has been recently opened, or open a project by browsing to it. We can also leave.

  In your case, you go again and when the dialog box opens, choose the preset for AVCHD w / DD 5.1 SS Audio.

  Also note, that in the Edit Mode, there are two Modes of display (access via two icons to the left of the lower panel), view timeline and sceneline view. For DD 5.1 SS Audio Clips, you will find Timeline View Mode to be the best. Now, you can switch back, but the timeline view Mode will give you infinite control. It is estimated that change the most programs use, and most publishers use.

  Good luck

  Hunt

  PS - I highly recommend Steve Grisetti book, The Muvipix.com Guide to Adobe Premiere Elements 7

• To access the properties of an Error Message When you use the DisplayRunTimeErrorDialogEx method

  I have a reminder that displays the standard runtime error dialog box using the method Engine.DisplayRunTimeErrorDialogEx of custom error. http://zone.ni.com/reference/en-XX/help/370052H-01/tsapiref/reftopics/engine_displayruntimeerrordial....  The parameters of this do not allow me to specify information about the error message available (via the properties of the stage of the appeal of error).  However, when built-in bed in treated TestStand display dialog runtime error through its methods of error handling he managed to fill in the details about the error.

  Anyone know how I can fill in the details and the error code from the dialog box fields when you use the DisplayRunTimeErrorDialogEx method to call it? See attached screenshot by one example of what I get when I use this method.

  Kind regards

  David

  Doug is correct; each sequence in the call stack has its own sequence context, so if you just "ThisContext" for the sequence context parameter, you provide the framework for the error callback, which has no error.  To access the context of the sequence that wrong, you use the caller property to get to the next level in the call stack, for example:

  RunState.Engine.DisplayRunTimeErrorDialogEx ("error Dialog", ThisContext.Caller, 0, False, False, False, False)

  I hope this clarifies!