Error-200220 with PCMCIA card 6062E + BNC-2110

Hi all

I have a problem with the map 6062E. This is my version of LabVIEW 2010. As is apparent from the attachment, MAX is able to find the device and his name is "Dev17". Also on LabVIEW control channel side found this device and channel a0. What is perhaps my current installation wrong because I get this error all the time?

I did some tests on the side of MAX and channels measure the voltage in a correct way.

Thanks in advance,

-Jim

Use DAQmx screws place DAQmx base live

Tags: NI Software

Similar Questions

  • Tecra A4 and Win7 - problems with PCMCIA card driver

    I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

    Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

    I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

    Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

    Thanks to the forum, in advance

    Hello

    The pcmcia.sys and pcmcia.inf files are part of the Windows System.
    This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

    You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

    To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

    However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

  • Satellite 1400: Code 12 error if the PCMCIA card inserted

    I inserted a D-link dwl-650 + Wireless pcmcia network card in my laptop Satellite 1400-103.

    It does not work and cited the reason as being, "this device cannot find enough free resources that it can use. (Code 12) ».

    I don't see any way to change the resources for this device, or other cards, if anyone has an idea how to get it going?

    Sorry if this sounds a little vague, if you need to know something else, let me know.

    Thanks in advance.

    Hello

    This looks like a problem with PCMCIA (pc card) drivers.
    They are not assign correct system resources to the card to make it work.

    Go to system and look and PCMCIA drivers Device Manager.
    Try to remove them and let the system reload their next startup. Try installing the latest PCMCIA driver.

    Best regards

  • problem of analog with PCI-6115 and BNC-2110

    Hi, I have an acquisition of data PCI-6115 and BCN-2110 connector card I want to measure continuous analog voltage. Now I can permanently measure the intensity of light laser of photodiodes through channel 1 and get the reference through the 0. Then I can get the harmonic signals by the multichannel lock - DAQmx.vi. However, I also want to simultaneously detect another analog signal in channel of gold voltage 2. The problem is: Channel 2 voltage range is approximately 0.3 mV to 6 mV which is significantly lower than the other channel 2 (0 - 10V), how could put different prescription by channel continuously and simultaneously acquire all data?

    I found that Dennis Knutson has provided the solution a year ago, which is listed below:

    In the solution, it should be arrays of strings, lines, patterns, but I do not know how to apply it to my case. Is there a suggestion or another solution?

    Thank you very much!

    You have the autoindexed exit task and is not correct. Try the code below.

  • SCO UNIXWARE 7.1.1 install vSphere 4 (ESX 4) ERROR problem with network card

    Hello

    I try to install SCO unixware 7.1.1 on vSphere 4.

    Install and configure sco OK after installation OK, but after you configure NIC SCO is dead

    PANIC: Integer zero-divide trap in kernel mode

    When I disconnect the NIC so unixware run OK

    Thank you

    This looks like a known bug of UnixWare.  You must install SCO UnixWare Maintenance Pack 5 before setting up networking.

    Please see the section of the Guest operating system Setup Guide for SCO UnixWare 7.  In particular:

    Note To avoid a kernel panic, install MP5 before performing any configuration network on UnixWare 7.1.1.

  • X 230 error 1802 with the Correct WLAN card

    Recently, I ordered my brand new x 230 for the start of the University and selected the thought of WLAN card default option which would be sufficient for my needs. After the hand signal and dropouts, problems I decided to upgrade the WLAN card that would improve the signal strength.

    I know the existence of the 'white list' frustrating that means that some cards are allowed to use. So, I went in the store of Lenovo and looked for what was the best WLAN card that might come with a new order of a 230-System x, as surely they are on the whitelist.

    Later, I bought an Intel Centrino Ultimate - N 6300 card and installed correctly in my x 230. However, from the start I saw to my despair that the 1802 error was there, tells me my card has not been approved. Could someone explain how hell a card that can come already installed in x 230 is not did not whitelist checking?

    Needless to say I am not very satisfied with Lenovo, because I can't even find a list of what cards are accepted. What is the point in a white list anyway? I am a student trying to patch BIOS to remove it, but no one has yet done a patch.

    Why do I get an error 1802 with this card?
    Thank you.

    Hello and welcome,

    Doesn't have that 6300 come from the store of Lenovo, or from a vendor who said it was for a Lenovo laptop?

    The card type is not the whole story when comes to the white list.  In addition to the correct (6300) type by its PCI vendor and device ID, it must have an ID of subsystem of Lenovo.  (IIRC, it can be more precisely not the subsystem ID, but the effect is the same).  A generic 6300 will not work.

    A card must be sold by Lenovo or pass the white list.  Reputable suppliers will provide a number of Lenovo FRU (CRU) to check the FRU list for the machine.

    For example. Since the research database of Lenovo parts -> ThinkPad X 230page, the RUF for that 6300 is 60Y3233.  It was not easy to find.  The RUF are not in the hardware maintenance manual any more

    If your card has a number of Lenovo FRU, something else is in place.

    [edit] types andyP faster as I do...

    Z.

  • PCMCIA card will not install on Satellite L30 - 10y

    Hi all

    I hope someone can help with this problem. I recently bought a PCMCIA card with additional USB ports for my laptop Satellite L30 - 10y. It works on Vista basic, anyway I shoved the card into the slot and let windows install the drivers, problem is it will not load I get an error message saying that the MDT-0002 device does not charge.

    Is it a Vista problem or Toshiba thing?
    Thanks for any help on this one
    Regards Ciaran

    Hello

    I doubt that it could be a matter of Toshiba.
    I googled a bit for this device MDT-0002 error, and this error using some PCMCIA cards on different laptops from different manufacturers under Vista OS.
    Someone said that the Pcmcia.sys (PCMCIA driver) must be updated.

    I also recommend to contact manufacturer of PCMCIA card support for more details on a few issues with the Vista operating system.

    Welcome them

  • Qosmio G45-AV680 hangs up when I try to insert a PCMCIA card

    My laptop is Qosmio G45-AV680 with Vista 32.

    When I try to insert any PCMCIA card on my laptop, my laptop hang up every time.
    I had to express card PCMCIA slot. When I use express PCMCIA card with PCMCIA card, my laptop works well.

    I try to chang Vista 32 bit to XP Pro. Operation of PCMCIA is good.

    I think the driver PCMCIA of Qosmio (vista 32) has big bug.

    Is there someone with the same experience?

    Hello!

    Have you checked if you have the latest drivers and BIOS for your Qosmio G45?
    You can search here:
    http://www.CSD.Toshiba.com-online download-online mobile => Qosmio-G45-AV680 online

    And you have the Vista SP1?

    Maybe you can give me your comments.

    Good bye

  • Error 200452 with synchronization of two cards PCI-6733

    LabVIEW: 8.6

    Using two cards PCI-6733 connected via a RTSI cable, I'm trying to get an output synchronized two PCI cards (which are connected to of BNC-2110).

    Here is the labview code I put together by looking at the examples online and in the program. To the left of the diagram is the part of the program that generates the entries.

    Currently, it gives me an error 200452: "specific property is not supported by the device or is not applicable to the task." Property: task of Start.TrigType name: _unnamedTask<26>. »

    Any ideas how to solve this problem? The Labview code above looks like it will do what I want?

    Thank you

    After investigating further the code, since it seems that your referencing the same clock, you do not need a trigger. You can probably avoid the error by removing the third blpck on all threads

  • Strange problem with analog output PCI 6251 and BNC-2110

    I'm controlling current source of third parties using the connectors of analog output on my card PCI 6251 and BNC-2110.

    The current source needs an input signal of 0.1V. I tested it using a battery, the potentiometer and the voltmeter, and by manually adjusting the voltage of power current works - current output with control voltage scales according to the specifications and is relatively stable.

    The data acquisition card works too - when I connect a voltmeter to the AO0 AO1, the measured voltage corresponds to the target with great precision value.

    But when I connect the current source of third AO0 AO1 data acquisition card, the measured output voltage drops and fluctuates. This applies to both channels of the AO.

    I wonder what is the problem here. I suspect it could be a matter of the grounding - the current analog control of the source is an entry with two floating terminals differential. I tried to return the switches FS/GS on the BNC-2110, but that makes no difference.

    Anyone knows similar behavior? Does anyone have any suggestions?


  • Problem with connection diagram - BNC-2110 to PCI 6280

    Hello

    I want to read analog input using BNC 2110 as an interface connected to the PCI-6280. In the first step I want to use the Signal Express to see only the data, but when I choose one of the input and then string I want to see the connection, I get this message:

    ------------------------------

    Connection scheme tool does not send the accessory on the connector 0 of your device:
    BNC-2110

    Please select one of the following accessories to display the supported connection diagram:

    Support for accessories:
    SCB-68

    CB-68LP

    TBX-68

    CB-68LPR

    SCC-68

    ------------------------------

    What should I do in this step?

    Hi MiladAk,

    There is this sentence in the Manual "the BNC-2110 is only intended for differential analog input signals. The 16 channels HAVE on PCI-6280 are mapped to 8 connectors BNC AI0 - AI7 on BNC-2110. HAVE [n] with I [n + 8] represent a differential channel. This means that if you select channel differential AI0 in Signal Express with Terminal configuration it will also use AI8. These two channels is represented by a single BNC connector (connection central driver is positive = AI0, negative connection is shielding = AI8).

    Best regards

    CaravagGIO

  • BNC-2110, 6023E PCI card and Labview V9.0: is the sensitivity of data acquisition (change more little detectable voltage) 0.002V?

    BNC-2110, 6023E PCI card and Labview V9.0: sensitivity of data acquisition (change more little detectable voltage) is 0.002V

    Hi, I use the software/hardware above to read a voltage of a potentiostat world Precision Instruments No..

    I'm trying to record changes in voltage as low as 0.0003V but using the wizard DAQ, I seem to be limited to a sensitivity of 0.002V.  This is the limit of real sensitivity or have I missed something?

    Any help would be greatly appreciated.

    Hi DCAM77,

    Thanks for joining the forums!

    The PCI or 6023E has a 12-bit ADC.  In other words, it can make the difference between 4096 (2 ^ 12) different levels within the range of cards.  The card you have has a selectable range by ± 10 V, ± 5 V, ± 500 mV or ±50 mV software.

    This means that the minimum detectable variation will be 4 mV, 20 mV, 244 µV or 24, depending on the chosen range µV.

    You should be able to use the ± 500 mV or ±50 mV to get the least significant bit (LSB) value, you need, even if it means that your signal is located between these values.  If not, then you need to consider other materials to the application, or the addition of external circuits across the signal.

  • Hello! I can't subscribe to creatively Cloud for photographers. When you subscribe to gives an error when you pay with the card: "order processing error occurred for more information, please contact the Customer Service by phone 8 800 333 36 63."

    Hello! I can't subscribe to creatively Cloud for photographers. When you subscribe to gives an error when you pay with the card: "order processing error occurred for more information, please contact the Customer Service by phone 8 800 333 36 63, when making a payment via PayPal: PAYMENT_CPG_SETTLE_FAILED. How to order?

    Contact adobe during the time pst support by clicking here and, when available, click on "still need help," http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work

    big problems after the installation of Yosemite (10.10.2) with Photoshop CS6... The program crashes - last time 10 times during my working session... wacomtable does not work... It's slow... and receive errors on the graphics card... It s a terror to work with my beloved Photoshop!

    Yosemite upgrade very often damage existing Photoshop.  I thank Apple for that.

    You must uninstall and reinstall Photoshop, then apply all the updates of Photoshop from scratch.

    But first, give us details about your configuration:

    STANDARD TEXT:

    Note that it is standard text.

    If you give complete and detailed information on your configuration and the issue,

    as your platform (Mac or Win),.

    accurate versions of your operating system, Photoshop (not just "CS6", but something like CS6v.13.0.6) and the bridge.

    your settings in Photoshop > Preferences > performance

    the type of file you were working.

    specifications of the machine, such as total installed RAM, scratch file HDs, total available disk space, video card specifications, including total VRAM installed.

    What troubleshooting steps you have taken so far

    what you receive, error messages

    If problems of opening raw files also the exact camera brand and model that generated

    If you experience problems printing, specify the exact brand and model of your printer, the size of the paper, the dimensions of the image in pixels (so many pixels wide by pixels high). If going through a TEAR, specify that too.

    A capture of your settings, or the screen image could be very useful also,

    etc.,.

    someone may be able to help you (not necessarily this poster, which is not a Windows user).

    Read this FAQ to get advice on how to ask your questions correctly to get faster and better answers:

    http://forums.Adobe.com/thread/419981?TSTART=0

    Thank you!

  • For our ELVIS II units, I'm getting an error-200220. What is the problem with these units when they worked a month ago?

    On several computer stations, we receive the message error-200220 when you select any instrument on the Launcher of the Instrument when you press the run option. This message has not been deleted once the computer has restarted and the power of the bike box. What's wrong?

    I don't find this error code in the product documentation.

    On the screenshot you attached, it seems that there is no devices specified on the front panel, which means that the error you see is correct, the device identifier is invalid.  Are there available devices in control of the aircraft?  Your ELVIS II appears as connected in measurement and Automation Explorer (MAX)?

Maybe you are looking for