Error-200284 when using two daq cards

Similar Questions

• Error timeout when using hardware DAQ-6024E frequency measurement

  
  
  

• How can I get two jobs when using two monitors, instead of stretching a desktop on both screens?

  Hello!

  How can I get two jobs when using two monitors, instead of stretching a desktop on both screens? I n ' want to clone my office, and I don't want to stretch it. I want two desktop computers, where I can "send/give" to the other desktop programs.

  I need a third party program? It is very good. If you know one please tell me about it.

  Hi OskarKvist,

  This feature is not supported by Windows XP.

  However, you can use your favorite search engine to download any third-party software that could serve the purpose.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Satellite P750 - overheating when using the graphics card

  I have a Satellite P750. I have a few games that I love to play, but I am unable to because that laptop overheating during the execution of these games.

  The specifications of the P750 with GeFORCE 540 m graphics card and 8 GB of ram easily meet the requirements of the games (Counter strike source, cod mw3).

  While playing the games for about 10 minutes, all right.
  After this step, things start to warm up, and small defects appear on the screen.

  Small rectangles of messed up graphics.
  If I don't leave the game immediately, I get a BSOD with errors such as "IRQL _less_than_or_Equal.

  The vent on the left side of the laptop runs very hot when this happens.
  I cleaned dust vacuum on and uses a fan/cooling pad to try to cool it.
  Makes no difference.

  I updated to BIOS and graphics card drivers

  WHAT CAN I DO TO PREVENT OVERHEATING WHEN YOU USE THE GFX CARD

  Hmm using the page of the Toshiba driver graphics driver?
  Such driver is a bit different from the other nVidia drivers because it s modified for mobile use. It contains some kind of overheating protection.
  In case of higher temperatures of GPU, such driver would clock down GPU performance in order to increase the temperature of the GPU.

• VISA-1073807343 error code when using ResourceManager.GetLocalManager (). FindResources (filter) to detect the map of Pickering PXI

  I'm upgrading our test system for Windows 7 and NI Developer Suite 2012 DS2 in Windows XP and NI Developer Suite 2008 4th quarter. I have a problem with the help of VISA to detect devices PXI of Pickering. The problem occurs with the next .NET NationalInstruments.VisaNS.ResourceManager.GetLocalManager () call. FindResources (filter). I use the filter "PXI? * INSTR.

  To trouble shoot this problem I was using the VISA program FindResources.2008 c# example. I get the following error message when you apply the "PXI? * INSTR"filter. "Where not enough information or the device or resource is not present in the system. VISA-1073807343 (0xBFFF0011), ErrorResourceNotFound error code.

  Looking at other markets, I infer that VISA is not find the maps. I came across the same error message when I tried to launch the "GPIB? * INSTR"filter however I determined that there was a problem with the NOR-488 driver. 2. after having repaired the driver of the FindResources.2008 program would find the GPIB instruments using the "GPIB? * INSTR"filter.

  Max the Pickering cards appear in "Devices and Interfaces" and are listed as follows:
  12: PCI Device 'PXI12::9:INSTR '.
  15: PCI Device 'PXI13::13:INSTR '.

  In XP, the cards have been identified as:
  PXI12::9:InStr (Pickering 40-785-522)
  PXI13::13:InStr (Pickering 40-780-522)

  Also Max for each device, I am able to open the Panel to Test VISA.

  Any ideas why the VISA is not able to detect these cards?

  Thank you

  I thought about it. Apparently I needed Windows 7 to install the driver for cards of Pickering. I guess the "PXI VPP / VISA drivers" supplied by Pickering Test would take care of this.

  Until Windows has installed the driver of Pickering cards have been listed as a PCI device under 'other devices '. After installation, the cards have been listed under "devices PXI of NI-VISA.

  MAX the card now are listed as:

  12: Pickering 40-785-522 'PXI12::9:INSTR '.
  15: Pickering 40-780-522 'PXI13::13:INSTR '.

• How to set up and use two video cards at the same time.

  I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.

  The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time.  The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.

  My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.

  I hope someone can help me without spending more money...

  "You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."

  Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.

  So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.

• Acquisition of data using the DAQ card

  Hello everyone

  I need assistance with the acquisition of data of the generator of signals through DAQ cards. I plugged the signal to the SCB-68 generator where the analog inputs of the generator are connected to AI CH5 and AIGRND of the Terminal Board. Then the output of the block is connected to the DAQ card. The maximum sampling frequency of the card is of 250 kech. / s. The problem is for reason that I am not able to see the waveform on the labview. I looked at other examples to find the problem, I am, but I am not able to understand this. I want to be able to choose the sampling frequency. I attatched my code as an attatchment for you all to help me know what the problem is. Any suggestions will be appreciated.

  There is no task!  You have not specified any hardware (i.e. your data acquisition card) anywhere.

  Here's a suggestion.  MAX aperture.  Find your DAQ hardware.  Open a Test Panel.  Implement a continuous sample of N Points to some sampling rate.  Press Run and convince yourself that you get the data.

  Now, while remaining in MAX, to create a task, using the same settings.  Call for example something sensible ("MyFirstDAQTask" is not a good reputation).

  Now, go back to your code.  Eliminate the first two functions DAQmx.  Wire a constant task to the DAQmx Start feature.  See the little triangle down?  Click it, and it should show you the tasks he 'sees', the only one should be the task that you created in MAX.

  Note that 'Samples Visible' is now 'hard coded' in the task.  To get its value back out, you need to put a property node Timing DAQmx after the task start and pull on the quantity of the sample, samples per channel (which, for reasons that escape me, is a Dbl, you need to convert to an I32 before importing it into the while loop).

  Bob Schor

  P.S. Thank you to join your code.

• LabVIEW code for two daq cards

  Hi all

  I'm reading the analog signals using the USB-6210 device and function DAQmx. How to write my code so it would work with the NI USB-6210 or USB-6218 since both a pinout similar devices.

  Thank you

  dp128

  Do not write anything to recognize a different DAQ card. It's as simple as that. They both have the same number of input channels, and they both have the same maximum sampling frequency. You will only need to worry if your program was out analog.

  When you install a sinlge on a pc data acquisition card, MAX lists it as dev1. If you do the same thing with a different DAQ card on another pc, it is listed here as dev1. As I said, there is no difference to explain.

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• Compaq Presario CQ71 - error 1002 when using recovery (windows Vista)

  Hi guys,.

  I just encountered error 1002 while using the recovery... Recovery successfully crossed reformattng my drive, but crashed before reinstaling the original content. It's okay if I'm trying to hard drive or dvd rom recovery, all this translates into error 1002. I did some research and it seems that it is a very common error in hp without adequate solution products. I think I'm out of luck because my warranty expired years ago... How can I solve this problem? For me, it seems that recovery content originally placed on my hard drive (and later burned on the DVD by me) had been damaged. I see 2 possible solutions here:

  -to order an another recovery of the drives together (although I saw a few reviews it did not)

  -buy the new "Windows" and install a new fresh install (I will be able to perform the new installation at all?)

  I'd really appreciate pointers as I really don't want to lose my money for a solution that would work!

  Kind regards

  Robert

  Hello

  You can call the MSFT customer service and they will generally be able to find it for you.

  http://answerdesk.microsoftstore.com/msusa/en-us/answerdesk/answertech

• I get an error code 10 when using the network card.

  Hello

  When you use my internet dongle all my ports usb stopped working. cards network is to come up with and error 10 code. I uninstalled the adapter and re installed however it is always delivered with the same code. If I try to update it says I'm updating but the card still does not work

  Hi Sinead,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  "Code 10" error is generated in the Device Manager in one of the following situations:

  -Device Manager cannot start the device.
  -One of the pilots who needs the unit does not start.
  -Device Manager has sufficient information to recognize the error that spread upwards by the device driver.

  Note: in this case, the "Code 10" error can be a very generic message indicating some sort of unspecified driver or device problem.

  I suggest you run this Microsoft fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  I hope this information helps.

  Please let us know if you need more help. We will be happy to help you.

  Thank you

• Video rendering error 10008 when using PNG on clip

  As soon as I add a PNG above a video clip, it fails when I try to make. It gives the error code 10008 is. I tried several png. If you add in front of a video, it will work fine. As soon as you try to use the same image over the video (using a logo for example), it fails as stated above. This means that I'm not able to add a logo watermark to videos.

  Please notify.

  Thank you.

  A simple alternative is to put your watermark on a green or blue background as a pdf file, then use the green/blue screen installation.

  I remember reports that contain PNG used to ensure transparency in photo - images to have exactly the same dimensions of the pixel as the setting of the project, for example, 1920 x 1080 full HD.  However, if this were not the case, I thought they still made, but have been converted to PDF, if transparency does not.

  Geoff.

• error-2147217900 when using in labview database connectivity tools

  Hai... im new to create the database with the help of examples available im get some ideas... even if when I try to create a table I get an error that is attached with this thread... kindly someone give suggestion to create the database using the Toolkit or suggest resources to...

  I got it.. I tried to create a pass/fail column, I mistake here... and it corrects... must use pass_fail

• directx error invalid when using Skype

  I can't use my webcam logitech on Skype, I get the message not to have installed DirectX valid.

  Hello KhalidMehmood_978,

  1. What is the exact error you get when you try to install Skype on Direct X?

  2 was the work of webcam very well at any time before your computer?

  I suggest that you install the latest version of the drivers for the Logitech webcam and check if you have the same problem. You can visit the Web from Logitech website and install the latest drivers.

  http://www.Logitech.com/en-us/support-downloads

  Also download and install the latest version of DirectX. You can follow the link that will give you information on that below:

  http://support.Microsoft.com/kb/179113