Error 28000 (licensing module does not have) on the installation of Acrobat DC.
I receive the error 28000 (licensing module does not have) on the installation of Acrobat DC. The installation is on a new computer Windows 10 Pro. Installation was attempted at the start using Dell's digital delivery program, but have also tried installing after downloading directly from Adobe. I used the cleaning tool and tried to install it again with the same result. I tried installing using the administrator account with all services non - Microsoft Startup and antivirus disabled and received the same error message. I restored the system to a point before the initial setup attempt was made and tried to install it again and received the same error.
You can refer to another thread on the same question and try the steps.
Let me know how it goes.
I just reinstalled the software on my Libretto W100 - 10 d, from the internal HARD disk recovery partition recovery procedure.
After the intervention, I have a clean booklet; all works well, except my 3 G Module is not recognized: the SW of Wireless Manager is not installed, and the 3G module does not appear in Device Manager more!
It seems that the 3G module is not installed! of course before the recovery procedure, it worked like a charm!
I suspect something has disabled the 3G module (usually something similar happens in the BIOS...)
Can someone help me so that the 3G module working in return?
Of many tanks and best regards
Have you checked the settings in the BIOS?
To be honest I'm not quite sure if BIOS contains separate power switch or option Wlan 3G but you must absolutely check it m.
To access the BIOS press ESC and F1
Where would the BIOS contains 3 G or Wlan option, make sure that this option is enabled.
Then visit the Toshiba UE driver page and download and install the Ericsson 3 G driver
This is the driver for the 3G module.
my daughter has bought and downloaded Adobe Creative Suite 6 Design Standard Student and teacher.
When you start the installer, there is a screen asking for the license key. Out of any reason, the license key, that my daughter got Amazon has a different format as requested in the Setup license key.
The format of the Amazon license key looks like: XXXXX #-#-#-#-#.
The format of the software install license key looks like: #-#-#-#-#-#.
Considering that X stands for a letter and #, a number. Therefore, it is not possible to enter the license key and it is not possible to run the installation correctly.
So what can we do?
It is useful to read the documentation that comes with edu packages:
If I try and open an email with an attachment I get an error message: this file does not have a program associated with it for performing this action. create an association in the folders option control panel. Once there, I don't know where to goWhat is the attachment file extension? If you know what program should open with, just do the following.1. download and save the attachment to the office.
2. right click on the saved file.
3. Select: Open with on the shortcut menu.
4. click on: choose [default] program.
5. Select: The appropriate program.
6. check: always use the selected program to open this type of file.
7. click on OK.This should allow you to open these attachments directly from email address now.
ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 184.108.40.206, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).
Solution, according to this link, is:
If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?
For general advice, see troubleshooting problems with iTunes for Windows updates.
The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.
Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.
More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.
Why the Start button / stop the touch pad does not work after the installation of vap?
May I ask what system and what PPV version do you have installed?
I assume you mean on the Fn + F9 key combination...
Is this right?
Another FN button work as shouldy?
My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk. After removing the drive, the computer starts. I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?
Thanks for the info. I added the GPT to my search and discovered what had to be done in disk management. Here is a page with step by step instructions and photos. http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/
Original title: xp does not start after the installation of avira
I have a HP Slimline s7410
XP Home Edition SP3
I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
I have a cd/dvd drive of work.
I don't have an XP bootable installation CD
My system worked well until: I installed the free version of Avira
Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.
Here's what my BSOD looks like:
Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)
Any help is greatly appreciated! :)
My first suggestion is to do a system restore at this time point.
second suggestion is to keep your external drive connected to the pc at all times. only detach when necessary. of course, it would be better to install a second hard drive in the computer instead. in any case, keep your personal files out of the system disk is a wise thing to do. You can also download and store files for free on the Microsoft Skydrive site.
third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month. Basically, you can open the Explorer and right-click on the drive letter. then select Properties, and on the Tools tab, you will have the opportunity to run the disk check. then reboot and do a Defrag. where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.
Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.
so my suggestion is to do a series of tests using your cd bootable your computer works. see if you can actually run a chkdsk/r at the moment with them. If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them. in any case, see if your boot at the moment media can run a check disk at all, and let me know.
fifth proposal is to install "microsoft security essentials" like your anti virus program. even if you have run ubantu, it is not likely to have been an infected copy. anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations. the people who make the virus deliberately their engineer for the windows operating system. If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too. Although they no doubt, attacks are more frequent for the windows os.
I reinstalled XP Home Edition on my PC without formatting the drive first in order to keep all of my data. I have installed all service packs. However, for some reason, I had to call Microsoft to get validated. The only problem I have now is that it does not start without the installation CD in the drive. I have XP on the half before the C drive and me on the back of half. The reader is a digital WD800JBRTL of Western. Well it worked like that for years. Why can I now not start without the CD?
It seems that the NTLDR file is not on the C: drive. NTLDR is the boot loader for all versions of Windows.
You can perform a Windows XP repair installation & check if you are able to start normally.
For more information, please visit this link: perform a repair Installation
Hope the helps of information. Please post back and we do know.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
computer does not start after the installation of vista updates. Startup Repair is also not working. event name: Startup Repair v2, prob GIS. 1: automatic failover, prob GIS 2: 6.0.6000.163220.127.116.1101.1800, prob 3:6, prob prob 5 and 6 GIS GIS sig, 4:720907: corrupt file, prob GIS 7: 3221226021, 8:3, prob GIS GIS prob 9: repair wrp, prob GIS 10; 2, 0 s version: 6.0.6000.2.0.0.256.1. In addition, none of these advanced recovery options seem to work.
Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.
Hope that information was useful
ATI Radeon HD 4600 Series AGP Grapics card does not work since the installation of service windows 7 pack has worked before
Is not fully compatible with win7, some patches are available from ATI
LIP does not work after the installation of a local language, writing in my windows software 8This icon is hidden... and there is no preview in the installed LIP.I hv uninstall the software, but for the LIPS does not work
You use the Microsoft Account or Local user account?
Create a new user account and check the status of the question in the new user account.Create a user account
You can also refer to:
User accounts: frequently asked questions.
I have a problem and I can't understand it. This error message comes out when I opened only local disk E:
I have 2 HDD on my computer... 130 and 250 GB of both of them I do 2 partion so there C: D: E: and F:
C: is my windows data and 3 others my data. When I open my computer and then click on local disk E: error message comes out.
the error message is "this file does not have a program associated with it for performing this action.". but local disk E: can open it using Explorer tree (left side of the windows Explorer) or windows Explorer.
Download this file and unzip it and then double click on it and let it run, it will restore most all default files for XP associations
Hi, my camera is a nikon d 5300. Lighrtoom is 5.7.1. Lightroom can't read and develop the pictures that are taken in raw. If I sort to import raw photos - there is the error report that lightroom does not have this kind of raw format.
Hi, my camera is a nikon d 5300. Lightroom is 5.7.1. Lightroom cann not read or develop the photographs that are taken in raw. If I try to import raw photos - there is the error report that lightroom does not know this kind of raw format. My computer is 1 year (Win 7 HP). Who could help me?
DJ, the version number is in the subject line: 5.7.1. It's weird because this version should support the D5300 very well. My main guess would be a bad player or a bad USB cable.
Eugen, you can try plug the camera directly and download the images like this?
I want to backup my computer to an external hard drive but the popup of backup does not have this option.
(a) have you tried using different DVD to burn backup files and check if it burns?
(b) your use of any third-party burning software on the computer?
(c) what is the size of the backup files that you try to burn on DVD?
(d) you are able to burn CD/DVD in Windows Explorer?
(e) you are able to perform the backup to internal hard drive? You cannot save to the C: drive, try to perform the backup on a different partition and check.
Try to uninstall the burning of third-party of the computer software and check. Also try using different DVD to back up files. I suggest you follow these methods and see if it helps:
Method 1: run this Microsoft fixit tool:
Navigate to the following location and delete all the files and then try to burn the DVD and check if it helps:
C:\Users\(User Name) \AppData\Local\Microsoft\Windows\Burn\Temporary file Burn
You can see this Microsoft article and check if it helps:
Hope this helps, if you need help on Windows or the problem persists, please let us know we will be happy to help you.
Maybe you are looking for
While I was with my iPad it closed and restarted, when the computer reboots, it said I had to activate it, but I have problems with the Apple ID. The Apple, it says that it is connected with a ID was set up by a company, I worked for years when I had
I have windows xp and I used to have Firefox 3.6.16. I downloaded Firefox 4 and I have so many problems, I also Kaspersky as my safety for my PC. Can you help me recover Firefox 3.6.16, please?
I just want to know "how to get back Firefox 3.6.16? I tried so many times to download, but nothing happens. I use Internet Explore earlier and I really prefer Firefox...Please HELP me to recover my 3.6.16 Firefox?
I have tons of 3.5 diskettes with Word Perfect 4.2 and word perfect 5.1 files with a password I know - about 2 months ago I had a program of the trial which asked the password and I was able to open but had not time to save without password. Now I bo
I need to be administrator of pc to make changes and updates, how to become admin PC? I can't do my time right. He says that I can not change in time of the internet, because I need administrator. My pc does not directly connect to the NetGear modem
Hi allI am building a tree Menu in Apex 5.0.3 (Oracle 11 g XE), when using when the clause, it does show all the data, but without him, showing all the data.I'm trying to populate Tree Menu with data specific to a user successfully logged on.(A) tabl