error-5093 "the analysis library is not found" in the 64-bit project. But the analysis library is located in the 32-bit project

Similar Questions

• How resolve the error that reads "wmvcore2.dll's not found" after the installation of Cool Edit Pro 2.0?

  Hello

  I recently tried to install Cool Edit Pro 2.0 on my Dell laptop. After that it's over, I went to open the application, but the error which read "wmvcore2.dll is not found" message popped up. He suggested I have reinstall the application, so I did, but nothing helped.

  I wonder what I can do to solve this problem and can you give me any help will be greatly appreciated.

  Thank you.

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  Windows Vista Compatibility Center

  First thing to do is to check its Vista compatibility at the link above, and if not to see what patches/solutions are available from its manufacturer...

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers.

  If it's Vista compatible > uninstall it > Re-download/save to your desktop > right click on the setup.exe > run as admin.

  If the above does not help, try to repost in Forum Vista programs:

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  See you soon.

  Mick Murphy - Microsoft partner

• I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  I get the error c:\windows\system32\optionalfeatures.exe not found how to fix it

  Look herehttp://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/when-i-access-internet-explorer-a-message-says/25bef4a4-bb01-46ac-bc68-11c81e7b55e7

• I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this. "

  I do P2V of a Linux Machine, his failure with the error "FAILED: an error occurred during conversion:"root is not found""If anyone can suggest how to solve this...» He does not drive partition root to copy don't know why his account right there.

  I solved the problem myself... This is because the Version of Vcenter Converter. I'm using Vcenter Converter 5 to P2V a server Linux RHEL5.2, its not supported by Vcenter Converter 5. That of why I've done P2V using Vcenter Converter5.2 and accomplished.

• XP Pro error message "requested lookup key is not found in any active activation context" appears

  XP Pro error message "requested lookup key is not found in any active activation context" displayed when some Start Menu options are selected or whatever it is run from command run. IE will not start. Windows Update ran at the last stop, but site selection are not displayed. Tried to repair XP Pro upgrade disk. Reinstalled SP3. The IE7 installation fails during the installation of updates. Cannot find the Activation Assistant. Help!

  This should certainly guide you in the right direction http://forums.techguy.org/web-email/839381-solved-requested-lookup-key-not.html

• Error ORA-39165 chain of schema not found.

  Hello
  When importing by impdp since an export dumpfile I error ORA-39165 scheme string is not found.
  1. How can I check that in the export dump file, there is no schema of the view? In imp utility we display option. Is there something for impdp?
  
  Thank you.

  See Note: 260225.1 Import DataPump parameter REMAP_SCHEMA - how to move objects from one schema to another database

  $ impdp system/****@mybase DUMPFILE=mydump.dmp remap_schema=schema1:schema2
  

  Of Note: 464558.1, it should also work:

  $ impdp schema2/****@mybase DUMPFILE=mydump.dmp remap_schema=schema1:schema2
  

  HTH

  Enrique

  PS, let us know how it went

  Published by: Enrique Orbegozo on October 22, 2008 08:00

• Executable built with CVI 8.1 error-5093, the analysis library is not found

  Upgraded to 8.1 Labwindows/CVI of Labwindows/CVI 7.0 development machines. An earlier application was built using the ICB 7.0 and installed on a test computer. The same code built with CVI 8.1 is any error during execution of the function stdev, 5093 error code has been generated. (From analysis.h: LibraryNotFoundAnlysErr =-5093, / / the analysis library was not found.) Tried to build a facility with 8.1 and installation on the test computer and application errors still executing the stdev function. Back to the same application, but built with CVI 7.0, it works fine. Am I missing something with the build in 8.1 options? Or is it something in the workspace or project? Please notify. Thanks in advance

  Hi Tommy,.

  In CVI 8.0, the implementation of the analysis library has changed a static library that is linked to your .exe in a DLL that must be loaded when running. If you rebuild your source code and you want to deploy to another machine where the CVI environment is not installed, then you must re-create an installer in CVI 8.1 distribution, so that he can pack the analysis as well as your program library.

  You can confirm whether the analysis library is installed by searching for C:\Program NIUninstaller Instruments\Shared\Analysis\nianlys.dll in your target machine (although it is not enough to simply copy this file manually).

  When you create an installer in the CVI, be sure that, in the tab drivers & components in the dialog box change Installer , support of analysis element under the Group of LabWindows/CVI Run-Time Engine is checked.

  Luis

• Registry entry point to restart application not found in the dynamic library KERNEL32dll; Error - smaxpnp.exe - point of entry not found

  When I reboot, or start my system I get an error - smaxpnp.exe - not found entry point

  Hello

  Have you made changes on the computer before this problem?

  Smax4pnp.exe is a system process that belongs to the software SoundMAX. It is not necessary for sound to work on your computer, but is mainly used to run or adding components to the software SoundMAX program.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Step 1:

  Start safe mode and check if the problem persists there.

  A description of the start in Windows XP Mode options:

  http://support.Microsoft.com/kb/315222

  Step 2:

  Put the computer in a clean boot state, then start in normal mode and check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

  Method 2:

  Try to remove the smax4pnp.exe of your computer and check if it helps.

  Follow the steps to remove smax4pnp.exe:

  a. Press 'Ctrl', 'Alt' and 'Delete' on your computer to open the Windows Task Manager. "Click on the"Processes"tab on top.

  b. scroll down and click on "Smax4pnp.exe." Click 'End process' to stop the currently running process

  c. click on the Windows "Start" button, then click 'Search'. Click on "Search all files and folders" on the left panel to open the search box.

  d find and delete this file: Smax4pnp.exe.

  e. empty the trash to complete uninstallation.

  Hope the information is useful.

• Skype error: "Skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport...". »

  Sorry for the ridiculously long title, but that is exactly the error I get.  When I contacted my friends @ Skype that they just told me it's associated windows problem.  I thought, but the error message appear says SKYPE not Windows. Anyway, there is a certain irony in all of this that Skype is a Microsoft company. I'm absolutely furious since Skype perhaps in conjunction with Windows has developed a kind of points of failure...

  Original title: skype.exe point of entry not found the procedure entry point ntalpcsendwaitreceiveport could not be found in the dynamic link library.

  Please note that the thread referenced in 'Question (1)' has been marked as the answer by a moderator, and not by the person who asked the question.  It is highly unlikely that will help in the Safe Mode, starting in a start-up in minimal mode or sfc/scannow configuration. Of course, you're welcome to try these things.

  Uninstall and reinstall of Skype as suggested in "Question 2" would have been my first guess, but a bit of searching online suggests that it also assisted.  Again, try if you wish.  When you uninstall Skype, you will not lose your contacts.

  Research online, I've mentioned suggests that the problem is caused by software Kies from Samsung.  You have this installed on your system?  If so (or even if not), go to C:\Windows\system32 and rename avrt.dll.  You can call it avrt.dlX or something else you like.  Reset.  Let us know if that fixes the problem.  If it didn't, or he did something another break, you can always change the original name (this is why rename is safer than deletion).

  Reference: http://forum.renoise.com/index.php?/topic/31412-solved-ntdlldll-ntalpcsendwaitreceiveport-error-on-startup/

• Receive the error message"MFC-7860DW LAN is not found" when scanning

  Original title: printer all-in-one Brother MFC-7860DW after Windows update problem

  Shortly after that I installed an update through Windows for my Brother multifunction printer, I could not scan documents to my printer wireless to my Toshiba laptop.  I got an error message saying "MFC-7860DW LAN is not found."  Yet the wireless connection between the printer and the router is fine, and I can print from my computer very well also.  I did this for a long time so I have something had happened recently.  The update was allegedly from brother.  I spoke with the brother support and they gave me a way to scan the computer using Windows Fax & scan, but I really need to be able to make it from the printer itself.

  I have reset the PC to a restore point before that I did the update of Windows, and I uninstalled and reinstalled the software of the printer 3 times, including the connection with the wireless system, all without effect.  When I check the Brother Installation Diagnostics file, it shows that the scanner driver has no installation and connection.  All the other drivers installed correctly.

  Any ideas how to install my scanner driver?  Thank you!

  Try Ronald ron's response

  Altho, reg cleaner ccleaner can erase valid entries reg sometimes. So, I don't know if I would use that

• Gettig error message: value "HKEY_LOCAL_MACHINE\": "ConfigDir" is not found in the registry for the Corel software

  Original title: Corel Software-related Error Messages, I tried to delete

  I'm getting 2 error messages associated with a Corel program I tried to remove it.  The messages are:

  1. "HKEY_LOCAL_MACHINE\" value: "ConfigDir" not found in the registry
  2. the language of the INTERFACE of vase directory is not valid

  I press Ctl-Alt-Del to exit pop ups of the error, and when appears in the Task Manager, the tasks that I have to stop are:
  1. bad language directory
  2. corel

  This happens when I right click on Office Documents and sometimes on my USB files. All opinions are appreciated. Thank you.

  Hi Bea Haive,.

  The problem may occur if the language pack is not installed correctly or not installed at all.

  To resolve this problem, you will need to re - install the language pack.

  You can consult the Corel support for more information links:

  http://CorelDRAW.com/forums/p/1748/6342.aspx

  http://CorelDRAW.com/forums/t/5386.aspx

  You can also get in touch with Corel for additional assistance:

  http://CorelDRAW.com/forums/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In the notifications area, shows an error "Intel my Wifi technology: card not found".

  I have a HP Pavilion dv6 6031-tx laptop running Windows 7 64 - bit, bought last month. I still have to use the technology wireless with this device, but have you noticed the error message ' Intel my Wifi technology: card not found "when plane on an icon in the notifcation area. First of all, I noticed this little time after the update from my computer through the program of support of HP, but it could be he leave early.

  Thanks for the follow-up, but after a bit of searching on Google, I managed to find a solution.

  In Device Manager, I have cahanged the the power management of wireless devices by unchecking the option "allow the computer to turn off this device to save power". When the computer reboots, the error message disappeared.

  Thanks anyway

• Cannot install Acrobat form cs6 diskete: I get this error: Exit Code: 6 - ARKSelector.dylib not found in/Library/Application Support / Adobe / deco

  How one work around this error when I try to install Acrobat form CS - 6 Design & Web Premium CD on my Mac air?

  Exit code: 6 - ARKSelector.dylib not found in/Library/Application Support / Adobe / deco

  Help!

  Errors ' Exit Code: 6, "" Exit Code: 7 ".

  Mylenium

• Plans test stops with the error 'Array with key "BB0050569F23260000-null" not found ".

  Dear gurus, I hope someone can help me with my problem.

  My SRM 4.0 Lab:

  • two servers vCenter v.4 + SRM 4.0 + EMC_Celerra_Replicator_SRA

  • two VSA Celerra with replication of work

  • two ESXi 4 servers connected to vCenter Server

  When I am trying to perform a recovery of the Test plan, I got the error 'Array with key as NULL "BB0050569F23260000" not found. "

  I guess it's something with recovery VSA, but cannot move forward, as I am a beginner in storaging.

  I've attached screenshots of the box of diag "Configure storage arrays", maybe this will help.

  Thanks in advance!

  without the hotfix SRA, you must rename your celerra VSA on the two sites do not contain not "-" in their names

  Itzik Reich

  Solutions architect

  VCP, VTSP, MCTS, MCITP, MCSE, CCA, CCNA

  EMC²

  where the news concerts

  If you find this information useful, please give points to "correct" or "useful".

• manage the runtime error 1000: server lost connection/file not found

  I have a videoDisplay object that throws an error file not found on the server running, even if it is there. Sometimes it works, sometimes it throws the error and the program cannot recover from the error, so after that the error is thrown, the object is stuck until the refill. I've seen examples of using the NetStream class to load the file before playing and also the class NetConnection.
  
  What is your preferred method for the two video load, assuming that the user will change the video source several times during the session and management research of server errors?

  Yes, you'd know that if you're using FMS.
  If you use a var can be linked to the source of the string, this is the first place I'd watch. You can try a stripped down from the sample application with no link? Just change the source of a button click and see if the server generates the error... I bet it won't