Error 601 on HP Pavillion G7 1355DX start - but I can't locate CMOS to replace

Similar Questions

• DW gave me an error message asking to remove and re - download - but I can't download it again.

  This seems a very simple question, but I have no problems downloading DW. Don't know how I can re - download the DW - any help would be appreciated.

  Hello, Estella,.

  in most cases, it's ok if you follow the advice of "Adobe Creative Cloud Cleaner tool". I quote: "... helps to solve the problems of installing Adobe Creative Cloud and Adobe Creative Suite (CS3 - CS6) applications. The tool removes the records facility for preliminary facilities of Cloud applications or Creative Suite creative. It does not affect existing installations of earlier versions of Creative Suite or creative Cloud applications. »

  Please use: http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation - problems.html. Please follow the prescribed sequence of operations (see screenshot):

  

  If necessary and for questions and so "open" Please use the cat, plus I had the best experiences.

  Hans-Günter

• Error 601 help asked for Pavilion dv7 - 3063cl

  Hello

  I have a Pavilion dv7 - 3063cl and anway there a 601 error. I replaced the internal battery (CMOS) and I thought everything would be fine, but at the start, I get the error 601. I looked around HP.com and other sites trying to figure out how to solve this problem, and he has been without success. When I plug in the AC adapter it will only be "plugged in, not not load." It was a difficult mess and it couldn't have come at a worse time, because I am a student with exams at the corner. One who reads my message and knows or has any suggestions is appreciated by speed. If you need more information, I will provide. Thank you.

  On a side note, I did download and install the latest BIOS but I don't know if I need to do something more in this regard. I'm tech-savvy than the average, but I might have forgotten some minor details. Again, thank you.

  MC.

  You need to replace the main battery.

  I'm working on a G60 who has the same problem.

  Battery HP (601) alert.

  Just replaced battery gone error.

  Good luck.

  REO

• error 601

  I have a HP probook 4525 s.  I had for about 5 years and just started receiving an error code 601.  I bought the cells of the battery already, but unable to locate in the laptop.  I searched youtube for videos, but have not been able to locate everything about replacing the internal battery to this model.

  Can someone guide me, please?

  Thank you.

  Awesome. Looks like I'm looking for information.
  
  Thank you.

• HP Pavilion dv7-1245 ca battery internal error 601. How can I change the battery

  Hello

  My laptop is a Pavilion dv7-1245.

  It shuts down its own, and after a few minutes, she lights up and displays this error message when starting:

  HP battery alert-

  ... your internal battery needs to be replaced...

  Internal battery (601)

  Sometimes, I need to start my car.

  I bought it two years ago. I just program the hard drive a week ago, causing the original one crashed badly.

  Could you please tell me what specific battery should I buy?

  I read in another post for the Pavilion dv6 you just need to keep it pluged to replace intyernal battery like in a flaslight. Is it OK for my model?

  I would also like to know if the problem to cut down on its own, it is linked with the battery warning or if it is another question.

  Please notify. I use my laptop to work ar House, and I can't afford to buy a new one now.

  Thanks in advance

  Soledad

  Montreal, Canada

  Hello

  You just need to replace the internal battery.

  Here is the maintenance and Service of Guide for your specific model.

  On page 54-55 you will find instructions how to remove the battery and how to install the battery.

  Here you can buy a new one.

• bad battery or DC power converter? the main battery (internal) (error 601) windows displays battery to

  defective battery or DC power converter?

  battery (internal) (error 601)

  Windows displays the battery to 100%

  laptop not boot battery, will start only on ac, but battery installed shows error 601

  HP eliteBook 6930

  no spare battery

  althefirst wrote:

  defective battery or DC power converter?

  battery (internal) (error 601)

  Windows displays the battery to 100%

  laptop not boot battery, will start only on ac, but battery installed shows error 601

  HP eliteBook 6930

  no spare battery

  This error is a bit confusing.  At first glance it seems to refer to the CMOS/RTC battery but actually refers to the main battery to the laptop.  Even if the computer indicates that the battery is at 100%, it would be a good idea to check that it is in working condition.  I think that it is a good first step, because although it doesn't show 100% charge, you say the laptop does not work unless it is on current alternative.  This paper addresses the issue further.

  As indicated in the document, the HP Battery Check will be performed to determine if the battery is faulty.

  To perform battery check do the following and display the result.

  1. Unplug the power cord and turn the computer off.
  2. Press on the button / stop to turn on the computer.
  3. Press the ESC key immediately seeing the HP or Compaq logo screen.
  4. The Start menu appears.
  5. Press F2 to select F2 System Diagnostics .
  6. Select battery Test in the list of diagnostic tests.
  7. Connect the power supply cable.
  8. Click Start Test Battery on the battery Test page.

  If your battery fails this test, it will need to be replaced.  To get a spare battery, you will have to contact HP Support.  If you are in the USA / Canada you can call to the 1-800-474-6836.  If you are located outside of this area, you will need to go to the HP support site and after selecting your country, search for "Customer Support" in the lower right corner to get contact information for your region.

  I hope this helps!

• I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  Does anyone else have this problem?

  It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?

  I have the same problem!

• HP Pavilion dv6-3057tx: internal battery error 601

  Hello

  HP Pavilion dv6-3057tx use for 4 years now I got error internal error 601 battery

  and asked me to press ENTER.  Today mrg from the laptop does not work. It becomes not ONE.

  Please give a solution for this.

  Thank you

  The 601 error is a problem with the main battery which I think is just old. Have you tried to remove the battery and leave the laptop with only the power adapter?

• Error Msg appears "Csrsc.exe" when I start laptop Windows XP

  Error Msg appears "Csrsc.exe" when I start laptop Windows XP

  Hi K K Mallik,.

  What anti-virus software is installed on the computer?

  csrsc.exe is a process which is registered as W32. Spybot.CF Virus. This Trojan horse allows hackers to access a computer remotely, flying of the passwords, personal data and Internet banking.

  This process is a security risk and should be removed from your system.

  Try to scan your computer using software installed on your computer or if necessary enforcement Online Scan (Microsoft Security Scanner).

  A quick way to search for viruses is to use an online, such as the Microsoft Safety Scanner scanner. The scanner is a free online service that helps you identify and remove viruses, clean your hard drive and generally to improve the performance of your computer.

  To run the Microsoft Safety Scanner:

  a. go to the page Web of the Microsoft Safety Scanner Download scan.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  b. click on Download nowand then follow the instructions on the screen.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please post back with the State of the question.

• cranking up xp proffesional sp3 it stops with error disk fail (40) in order to start it, it tells me to press f1, how to cure this problem ps disk is disabled in the bios

  operating system xp proffesional sp3 floppy disabled in bios but stops with the error message disk are still not (40) start the computer to the top when you press f1

  Hi petertomblin,

  I suggest you remove the floppy from the boot order in the BIOS (Basic Input Output System). Later, check to see if the problem persists.

  You can check again if the disk is disabled in the BIOS.

  
  Note: change BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information.
  Please post back and we do know.

• 2 Ihave rundll to appear on my screen when I start saying error loading I need them to be installed or I can remove them thanks

  2 rundll Ihave to appear on my screen when I start my pc, they declare that they are error loading c\windows\system32\prwleprn.dll. and c\windows\system32------nsiad.dll - (the specified module is not found.)   could you help please because I do not know if I need it or not if I could you tell me how I can install them, but if I don't need them could you tell me how I can remove them thanks

  PML instructions are precise and concise.

  My instructions for this issue are similar but more verbose - perhaps they will help you get your system fixed to the top (just read them first, then apply them).

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.

  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.
  
  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Error: "error 1920 Print Spooler Service (spooler) could start" when trying to install the printer

  Original title: print spooler could not be started

  Trying to install a printer. Get "error 1920 Service print spooler (spooler) could start. Can you please help?

  Hi phil195golf,

  1. What is the brand and model of printer?

  Try these steps and check if the problem persists.
  Step 1: Run Microsoft Fix to diagnose the problem
  a. see you can not add a printer and you receive spooler printer in Windows XP error messages
  b. click Microsoft hotfix and run the tool successfully.
  c. restart the computer.
  d. install the printer and check if the problem persists.

  Step 2: If the problem persists, install the printer by turning off all non-Microsoft programs
  see How to configure Windows XP to start in a "clean boot" State .
  b. follow steps 1 and 2.
  c. installing the printer and check the result.

  Note: Article, remember to follow 'steps to configure Windows to use a Normal startup state. "

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After restarting windows and then no error in config/system is finally windows starts successfully with no problems quo. __

  "windows couldnot start because the following file is missing" c:/windows/system32/config/system.
  This message appears at the first start, but when I press ctrl + Alt + Delete, restart windows and then no error in config/system does finally come windows starts successfully without problem usually. I searched on the internet that all solutions are given if windows XP does not start. But in my case after restart only a single window loads successfully. I'm dubious before using the recovery console.
  Please help everyone,
  no case I found the solution to this particular problem.

  The question was preceded by a loss of power, aborted reboot or abnormal termination? (This includes pulling and buttons power).

  These can cause corruption in the file system that must be fixed before you do anything else. If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).

  
  Never, never, never start with the support engineer technical 'expert' who are hired by Microsoft to implement the KB307545.  You are likely to be in for a frustrating waste of time and might just make things worse.

  Always, always, always start with a chkdsk with first error correction.

  There is zero logic to start try to copy files to a hard drive with a corrupted file system so corruption of file system must be fixed first using the XP chkdsk program and run chkdsk can solve your problem completely.

  Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do.  Or, you are welcome to just start trying things that might work.

  Start the Recovery Console Windows using an XP bootable installation CD, or create a bootable CD from the Console of the Recovery XP (no XP media required).

  A CD of XP Recovery Console is not the same as the recovery disks that may have come to a store to purchase the system.

  If you have any bootable CD to run the XP Recovery Console or that you are not sure what type of bootable CD you have, can create a bootable XP Recovery CD of Console and don't forget (no support for XP not necessary).

  If you need instructions to create a bootable XP Recovery CD of Console, we can predict that too (just ask).

  After booting into the Recovery Console, you should be in this folder:

  C:\WINDOWS

  For each of your hard disk partitions, you must then run:

  Chkdsk /r

  For example, at the Recovery Console prompt, enter:

  CHKDSK c: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time to complete or seem to be 'glued '.  Be patient.  If the HARD drive light flashes, it's something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  The chkdsk/r must be completed without error, you may need to run several times until it does.

  Remove the CD, and then type "exit" to exit the Recovery Console and restart the computer and the report with your progress.

• Windows Recovery error screen: cannot get my computer to start!

  After using my computer for a long period of time, I set it down for a few hours. When I put it up again, the screen was blank and I couldn't get out of hibernation. I manually turned off and restarted. Reboot, I had the Windows recovery error screen, where I was given the opportunity to 'launch Startup Repair' or 'start windows normally '. At the launch of the repair, the screen empties for a few seconds and returns to the error page. When you try to start windows normally, the system rebooted and returned to the error page. I did nothing durastic which would result in this error. Windows was preinstalled and came with any disks. How can I fix my computer and recover my files? My computer is a laptop Gateway MD.

  Have you tried from disk running of all of the above programs.  Of course, some of them managed from the disk as the Startup Repair and system restore.  Others such as SFC and chkdsk or event viewer can be run from the disk by using the command line option (and instructions above on orders to enter).

  Startup Repair and system restore has nothing to help?  Try these other options from the command prompt on the drive if you can't even in Mode safe (which is not a good sign).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• error recovery Windows returns constantly to the start without reason...

  Hi I recently got windows 7 Professional 64-bit my Thursday school last burn on a dvd. Everything seemed fine after installation, and such as Saturday when he starts in front of the screen of bio and then pop up with error recovery windows telling me that windows wasn't one to repair or start normally anyway would it continue to go to this windows error recovery screen bit whatever I chose. These events eventually led me to believe that my hard drive has failed in which I had a brand new only on Sunday and installed fine all appeared while Monday morning he started to blow upward with the same error message I could try the repairs say it was very good, try and boot and it would restart again. Fortunately I was able to install my Vista Edition home premium 64-bit, which seemed to be ok for most of the day until yesterday when it grew up the windows on error with the options to use the last configuration or start normally (due to the recent hardware or software changes, but I have not install anything new in terms of software or hardware) that works , but im not sure for how long. Im very tech savvy for my age and know what im doing with computers, but I can't seem to understand what is happening since it is a new player none of my hardware is a failure and I don't know.
  Appreciate any help...
  Colin

  Repair system solves most of the start-up problems.  Some computers have startup repair pre-installed otherwise you will need a CD/DVD of Windows Vista.   If your system still does not boot in Windows, follow these steps to repair the boot sector.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.