Error-603 occurred While Building DLL under Windows XP and LabVIEW 8.6.1

Problem:
I am creating a DLL in Windows XP and LabVIEW 8.6.1 and I get the error-603.

Error-603 to the DLL of the building.
A component required for the Application Builder does not support the required functionality. This could have been caused by an older version of LabVIEW installation after installing this version. To correct this problem, reinstall the latest version of LabVIEW.

Possible reasons:

LabVIEW: Specified key or value does not exist.

I reinstalled my LabVIEW 8.6.1, but the problem still occurred.

What can I do to fix this?

Reinstall, which is suggested here too

Tags: NI Software

Similar Questions

  • I'm running into this error message to a sysprep to capture a WIM image modified: "a fatal error has occurred while trying to sysprep the machine."

    Original title: WDS & Sysprep

    Hello

    I'm running into this error message to a sysprep to capture a WIM updated image the:
    3.14 system preparation tool
    "A fatal error has occurred while trying to sysprep the machine."
    She is probably explained by the time of Amendment 3, but is there a way to bypass that force me to change the registry whenever I use the new image?
    Any recommendations on how to solve this problem would be appreciated.
    Thank you.

    GN

    Please post your request here:

  • DW/WordPress "an unknown error has occurred while discovering the linked files dynamically"

    I'm trying to configure Dreamweaver CC 2014 to work with my WordPress site 4.0 on the remote server where it is installed. Access to the server is fine, tested ok, all the files listed and sync without problem. But every time I try to dynamically discover files that I get "an unknown error has occurred" while discovering the dynamically related files. What is going on? (Permalinks are the default btw)

    Is easily fixed! I just discovered that under my server settings, I had both 'remote' and 'Testing' checked. I checked "Remote" and it works fine. Just check 'test '.

  • After effects error: incident occurred while invoking effect plug-in 'Looks' URGENT!

    My name is Tyler and I am a Mult-Media Publisher in the training. Recently, which means simply this project I get this error "after effects error: incident occurred while invoking the plugin effect"Looks"." whenever I try to make. If I try to remove the clip where it messes up and replace it with another it will mess just straight up in another place.

    Screenshot here: http://gyazo.com/794429fd1091973c8a296a27d2af6fab.PNG

    Information:

    AE: After Effects CS5 (64 bit)

    OS: Windows Home Premium (64-bit)

    RAM: 8 GB

    Processor: 1 st Gen Quad-Core i7

    Graphics card: NVIDIA GeForce GT 320

    Updates: installed all updates for Adobe products

    Source footage: Call Of Duty: Modern Warfare 2 @ 60 fps using UT video Codec YUV 420

    Worked before? Yes

    Open GL: My open gl is not enabled

    I have read other forums and watched tutorials. I did the following. (Not in the used order)

    1 decommissioning Magic Bullet Looks from 1.4.3 to 1.4.2 (did not work)

    2 upgrade Magic Bullet Looks to MBL 2.0 of Magic Bullet Suite 11 (did not work)

    3 uninstall my gfx card and re-install with the latest version (didn't work)

    4 reset the AE preferences by pressing alt + shift + ctrl on the shortcut (didn't work)

    5. change H.264 rendering parameters->. AVI (did not work)

    6. I deleted the "AE_OpenGL" of my After Effects file (didn't work)

    My Composition:

    http://gyazo.com/53c7a2789a752cfba7e908bed31d7c01.PNG

    http://gyazo.com/da0cacaf4ef6d7e3276b6aa45b77da79.PNG

    The skin file is not that complex, but I don't know if it'll help, but that's it.

    The look file parameters:

    http://gyazo.com/25346bb318edadc54e09273977964c7d.PNG

    I've never had this problem before and hope someone has a solution to this problem... If so please post a reply. I don't know if its because I put the plug on all of my clips and then made an adjustment with an another Magic Bullet Looks layer or if it's my fault of clips but I don't know what to do.

    -Tyler

    It seems that the looks hangs only on this project. If this is the case then it is probably a problem with one of your video clips. Either there is a corrupt frame or some other codec glitch which throw errors. I suggest you replace the elements of film with temporary images. You can even use solids. Replace one at a time, then cancel, until you find the film that causes the crash. Then re - compress this film to another codec or replace it.

    If looks are blocks on all types of images, then you will have to pursue other options that are more linked system.

  • How can I fix tis (sorry, an error has occurred while processing your request.)

    When I try to go to traegergrills.com I get this message (sorry, an error has occurred while processing your request.) I can go on my other computer?

    This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".
  • I can't print from Firefox, receive "an unknown error has occurred while printing."

    Whenever I try to print something from Firefox (e-mail, reception and so on), printing fails and I get the message "an unknown error has occurred while printing." Printing from Internet Explorer works without any problem.

    You are welcome.

    Please mark it as resolvedusing the useful button when logged in to this forum.

  • I can't open several creative cloud app, error opens: ther'snt MSVCR110.dll in window 10 sistem

    I can't open several creative cloud app, error opens: ther'snt MSVCR110.dll in window 10 sistem

    Hi David,

    Please, try the following steps:

    Resolve the error "missing file msvcp110.dll.

    Kind regards

    Chirag

  • HA error "an error has occurred while setting up the HA Agent on the host" & "Failed to find host name" on the ESX host

    I had to reload of the two ESX 3.0.2 Server I have here.

    Now the I get a HA error "an error has occurred while setting up the HA Agent on the host" when try to reconfigure HA.

    I note also that the same host if console type 'hostname - a' I get "Failed to find host name"

    I still seem to migrate virtual machines, but clearly something is wrong somewhere, there DNS config file I can check, I already check ed the hosts file and I can ping everything using long DNS name and short host name.

    Or maybe there is dns service can I restart?

    Thank you

    If you are running ESX 3.0.x check/etc/FT_HOSTS

    You can also check http://kb.vmware.com/kb/1003691

  • Changing permissions in registry under Windows XP and Windows7

    How to change permissions for registry under Windows XP and Windows7.
    I tried using Regini.exe but that did not work.

    Thank you
    Amit

    Does that help at all?
    http://support.Microsoft.com/kb/310426

    Ethan
  • NOR-Fieldpoint supported in Windows 7 and LabView 8.6

    We have a 'classic' with an ethernet controller FieldPoint system. We want to be able to read/write from/to the FieldPoint network using a computer with LabView 8.6 and Windows 7. NOR-FieldPoint is supported in LabView 8.6 and Windows 7?

    Kind regards

    Nate

    Hi natewkidd,

    I feel like some confusion between the operating systems running on a development computer (as Windows 7) and real-time operating systems that run on our real time (such as the PS-2000) controllers. I will do my best to clear up this confusion first answering your questions.

    (1) what is the difference between 2009 LabView real-time and LabView 2009?

    LabVIEW Real-time 2009 is actually a software officially known as 2009 LabVIEW Real-time which is installed after the LabVIEW 2009 development software to allow the user to develop and deploy applications in real time on targets in real time as your PS-2000. You can consider the LabVIEW Real-time 2009 almost as a plug-in for LabVIEW 2009 deployment and development of real-time applications.

    (2) if I have a PS-2000 on the ethernet network and to use a computer that is running Windows 7 and LabView 2009 for record and display data, will I still be able to communicate with the network FieldPoint screws write FieldPoint to my Windows 7 computer?

    If you go just to use the PS-2000 as a network module (NOT to deploy a real-time application to run on the PS 2000 itself), you should be able to communicate with him using just the read/write FieldPoint screw on your Windows 7 with LabVIEW 2009 machine and the driver NOR-FieldPoint 6.0.5. In this case, you actually do not need the Module Time since you do not deploy the application to the target in real time.

    About the PS-2000 unsupported beyond LabVIEW 8.5.1, is because the controller's memory is not large enough to hold the software that is installed on the controller with LabVIEW 8.6.x Module real-time and LabVIEW Real-time Module 2009. For more information on this, you can check this knowledge base article.

    I hope it's useful! Let me know if you have any other questions.

    Thanks for choosing National instruments.

    Aaron Peña

    National Instruments

    Technical sales engineer

    http://www.NI.com/support

  • Error code 80070490 while search/checking the Windows updates.

    IHaving tried to solve a recent problem that occurs with Windows Update (error Code 80070490) I read and try different things that have been suggested on this forum. It appears after trying the SFC, there are a few problems with the registry that cannot be resolved automatically. I tried the automatic Microsoft difficulty he 50202 but that does not solve it. I tried a system restore, but there is no restore point before the update I managed successfully to do (31 October 2009). So finally, I tried the repair facility that suggest the majority of people. I've had this laptop since February 2009, and Vista was preinstalled. I have the DVD of resettlement for Vista Home Premium 32 BIT and have not added anything about myself, but when I try to do the upgrade to install it says it is disabled and that he needs at least a current version or the more recent than the version I am running. I don't see how it can be less common because it is the version that I've been running for 9 months and the DVD that I was sent with the laptop. I am now on the ideas and suggestions...

    Fraser,
    Well restoring factory would correct any problems if they are strictly related to software.

    If you do a normal upgrade to Windows 7 and the problems you are currently experiencing are the question within the registry, then it is likely that they could remain after the upgrade.  Now, if you perform a Custom Installation upgrade press she will move to your current Windows directory to a new folder (Windows.old) and then it will install properly.  Of course, with this option, you will need to reinstall your applications.
    If you buy a copy of Windows 7 in another country just make sure that you get the correct language and that it is a valid copy.  (Also check the version of Windows.)  You shouldn't have any problems once you get back.  Here are some links with information about Windows 7 and upgrade considerations.

    I hope this helps.

    Windows 7 upgrade considerations

    Windows 7 Compatibility Center Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • startup error: unable to find: gmsapns.dll c:\windows\

    Original title: start-up to receive a message that windows can not find: gmsapns.dll c:\windows\

    Need to recover these files

    You might think differently after reading this:

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.

    A Google search generates no good reputation hits making the file name even more suspicious.

    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it
    .  Autoruns shall display the same information however.
    Given that you had or have an infection, followed with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • I get an error message "an error has occurred while trying to write to the CONFIG folder. MSI"by updating to adobe reader.

    I have a folder named CONFIG. MSI shows as locked in 'share with '.  I can't seem to change the configuration, that is, to unlock the file.  In addition, 'Properties' shows 22 files in the folder but only 2 files display in Windows Explorer.  When I try to update Adobe Reader, I get an error message that an error occurred during the attempt to write to the CONFIG folder. MSI.  I am the administrator on this PC.  What can I do?

    Original title: locked file, CONFIG. MSI

    Hi Paul Rumbaugh,.

     

    (1) this exactly happens when you try to access the folder?
    (2) what is the error message or error code ?
    (3) have you made changes on the computer?

    Method 1-

    You should check if the problem persists in Safe Mode as well.
    To connect in Safe Mode, you must follow the steps in the article-

    Start the computer in Mode safe

    Note: make sure you connect in Normal Mode after you perform the troubleshooting steps.

    Method 2-

    Perform the steps in the article-

    Disable the anti-virus software

    Enable or disable Windows Firewall

    Note: make sure that you turn on Windows Firewall and re- Activate the antivirus after performing all the troubleshooting steps given the computer can be at risk of infection by the virus.

    Method 3-

    See the steps in the link-

    Error writing to file C:Config.MSI

    Note: you must follow step 7 of article to return the computer to Normal startup after you perform the troubleshooting steps.

    Hope this helps!

  • a disk error has occurred while trying to write the following file

    I was working on my video and I put in a video file and a 10 seconds later, I get an error saying "a disk error occurred while trying to write the following file.

    and audio of the video was not working I close Premiere Pro and open again to do the same thing and it happens again if you know how to fix this please tell me I need to change my video so I can get it to the top on youtube tomorrow.Help pls.png

    I contacted support and it turns off everything, I had to do was move the first clip on the desktop... lol Thanks much for the great help! Sorry for the trouble

  • General error has occurred while trying to run the initial Setup Wizard

    Anyone have advice on the implementation of vCOPS?  I have deployed the ovf, use a Pool of IP and configure static ip addresses, I get to the login page (https://< IP > / admin) and when running the Setup Wizard initial on the front page of details of vCenter Server I get a message "General error has occurred", which does not allow me to go further.  Now, I closed the browser to try again and I get a "Virtual Appliance Repair" screen that also fails with a general error has occurred.  Can anyone help solve this?

    The vCOPS unit is version 5.0.1.0 build 677931

    vCenter is version 4.1.0 build 258902

    vcops_err01.JPG

    Thank you


    Dan

    Looks like you had a communication problem between two virtual machines.

    When you created the IP pool leave you this option disabled?  Also, you associate it with the same network that the virtual machines are connected?

Maybe you are looking for