Error 646 when installing updates in windows Vista

Similar Questions

• error 646 when installing updates

  I got a lot of noticesto February windows update tried installing updates and will not accomplish.

  Hello

  It is a Microsoft Fixit who will help with this issue.

  You receive code 646 error or error code 0 x 80070646 when you try to install Microsoft
  Office updates
  http://support.Microsoft.com/kb/2258121

  Check this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/18449f60-C149-4EAF-B8E6-a2880cd7232b

  ------------------------------------------------------------

  If necessary you can incident free get reports however the above should take care of it for you.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Get the 8007371B error code when installing update for Windows Mail Junk E-mail Filter [December 2009] (KB905866) _

  When I run Windows Update it shows an important update available. "Update for Windows Mail Junk e-mail filter [December 2009] (KB905866).
  When I try to install the update, it downloads, create a restore point and starts to install the update.  The green bar goes all the way to the right and then I get a "failed" message with a 8007371B unknown error code.
  KB905866 appears in the list of installed programs.  I tried to uninstall and rerun the update of Windows, but he continues to go through the same sequence of activities having the same error message for result.

  Is there a solution?

  Last successful update was (November 2009) 11/11/2009
  First update failed (December 2009) on 09/12/2009

  SP2 has been installed.

  SP2 has been installed 03/07/2009

  Update tool for Windows Vista... (KB947821) has not been installed.

  I'm currently running AT & T Internet security from McAfee.

  This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

  I'm currently running AT & T Internet security from McAfee.

  This machine had Norton and AVG anti-virus in the past that I don't really know what was running back in July.

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. right click on the file that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. now, make this McAfee "triple fix": http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  Test.

  PS: Please don't substantially edit a message from you after that someone has replied to it or a post later of yours in the same thread. THX

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error 646 when installing updates KB2251419, KB227947 and KB982331

  The three security updates cannot be installed. Error 646 and no solution is offered!

  Hello

  Please run this FixIt:

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• I am getting error 646 when installing updates, in the following 2007 office, what should I do to fix this? __

  Vista Home premium

  See http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Download 80080005 error message when you try to install updates in Windows Vista.

  Original title: error 80080005

  Hello

  I'm still not able to run windows update. Automatic repair of Microsoft did not work, nor has repaired all in one Windows. I get error 80080005. Someone at - it ideas please. I am running Windows vista SP2.

  Hello

  Thanks for posting in the Microsoft Community Forum. Rest assured that we would do our best to help you.

  Try these methods and check:

  Method 1: First of all, make sure that no proxy server is causing this issue.
  a. click on the round to start, in the search field type cmd
  b. right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.

  c. has the prompt, enter the following command exactly as written including spaces and press enter

  netsh winhttp see power of Attorney

  If this message appears, type exit, and then press ENTER.

  Method 2:

  Check if the bits service is started.

  a. click Start, type services.msc

  b. Locate the Bits (Background Intelligent Transfer Service) service.

  c. double-click on it and check if the service is started and the startup type is set on automatic.

  Method 3:

  I suggest you follow the steps mentioned in the link one at a time and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  If the steps do not help, then follow the steps in the next method and check.

  Method 4:

  You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Put the normal computer as mentioned in step 7 of section.

  Method 5:

  I suggest you follow the steps:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  After you follow the steps of troubleshooting provided, if you get the error message please response so that we can help you further.

• Not able to install updates in Windows Vista, error 64 C.

  Original title: ERROR 64 c

  Impossible to update windows vista home edition

  Hi Jennifer,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that you can not install updates in Windows Vista.

  However, we need more information about the issue to help you better.

  Please answer these questions to better understand the issue:

  1. have you tried to manually download the updates from the Microsoft Download Center?

  2 have you made any changes to the computer before the show?

  3. when exactly you get this error?

  4. is the problem with the specific update?

  I have a couple of steps that should help you with this problem.

  Method 1: Please run the following fix - it:

  The problem with Microsoft Windows Update is not working:

  Method 2:

  Try the methods mentioned in this link and check:

  This problem may occur if Windows Update or Microsoft Update cannot locate the downloaded update.

  Error code when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0x8007064C.

  http://support.Microsoft.com/kb/958055

  Keep us updated on the status of the issue. For any help about Windows, you can still post on the Microsoft Community.

• Error code 646 when installing updates KB2288953, KB2288621 and KB2291599

  I get the error code 646 when installing updates KB2288953, KB2288621 and KB2291599.  My Dungeon udates on default.

  read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121

  Let us know if this helped.

• Not able to install updates in Windows Vista.

  Original title: no update: alert

  I had trouble with my PC and only come to discover that my updates have failed since April 14, 2011 - that is to say 95% updates failed. Can someone help me... Please? I'm a complete Newbie, so who takes up this challenge will have to be very sweet (and patient!)...

  Hello
   
  1. What is the exact error you get when you try to install updates?
  2 have had any changes made to the computer before the question?
   
  Check out the following link and check:
  Method 1:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
  
   
  Method 2:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost
   
  Answer comes back with more information on this subject so that we can send us your request in an appropriate manner.

• Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Why can not download and install updates from Windows Vista Home Premium 32 bit?

  Premium Vista Dell is actually not even install vista SP1, therefore, no update. In case of doubt, go to run, or cmd, type:

  WinVer the OS details appear. If no SP1, download & install it

  https://TechNet.Microsoft.com/en-us/library/cc749419 (v = ws.10) .aspx

  Use this link for download.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=Windows%20Vista

  This link allows you to get updates from vista through the windows update catalog, once running, search the installation 'Active X'

  Microsoft.

• 800b0100 error code when you try to install updates on Windows Vista

  Error 800b0100 code happens while trying to make updates.  I recently went back to the default factory settings and I try to do all the updates.  I used the updater and fix it also.  I restarted the computer and still no joy when you try to load the update for windows vista.

  Hello

  · Do you get this error when the individual any update installation (such as Service pack updates security etc.)?

  Method 1: Turn off the firewall and antivirus software of third parties.

  Step 1: Disable the firewall

  (a), click on Start and type Windows Firewall.

  (b) click on Windows Firewall.

  (c) click on firewall Windows turns on or OFF.

  (d) turn the Windows Firewall until we have install Windows updates successfully. If the problem persists then please continue with the next steps.

  (e) once we install the updates, please turn on the firewall.

  Step 2: Disable the anti-virus application installed on your computer. Disable the antivirus firewall.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Don't forget to return the computer to normal after completing the troubleshooting by following the steps under step 7

  Also see: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-error-800B0100

• ERROR: 0x8007F0F4 when installing updates in the Windows XP computer.

  Original title: ERROR: 0x8007F0F4.

  I get this error code when Win Update turns on and I'm trying to download/install. It's boring. The update never installs and then returns icon in the systray... what to do, ignore?

  Hi Kota57,

  You did it of any material changes or software on the computer before this problem?

  This problem can occur if any of the following scenarios exist on your computer:

  (a) you are trying to update your laptop when it is running on battery power.

  (b) the update installation program detects that the update is incorrect for your computer.

  (c) updates have not been installed on your computer.

  You can follow this link and check if the problem persists.

  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  Hope the helps of information.

  Please post back and we do know.

• Error: "updates not configured correctly" not able to install updates in Windows Vista.

  Original title: updates not configured correctly.

  With the many others who face the same problem.

  I get "Updates not configured correctly".
  After waiting for centuries, "returning changes."
  "Fix it" does not help, as usual.
  Supposed to be important updates.
  Microsoft will never get this sorted shambles hike?
  With the exorbitant profits they make, why not recover?
   

  Hello

  You did it changes on your computer before this problem?

  You can follow this link & check if the problem persists:

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  
  Reference: the problems with installing updates

  Hope the helps of information.

• code 80070002 error appears during the update of windows vista starter

  During windows vista starter updated operating system, the 80070002 error code appears on the screen and could not update and install something. How to solve the problem? Product key-33qmg-pb76m-kbpwd-mbqd3-k6ggk

  Sylvie chandrasantra,

  80070002

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.

  http://support.Microsoft.com/kb/956698>

  05/14 / 1104:51: 22 am

• "load error" message when you connect to windows vista account___

  When you connect on windows (vista) to my sons account, a window appears with the Dll Run in the upper left corner and a message that says: error loading C:\Users\... it indicates the name of my son, then - Home\AppData\Local\l41DMut.dll.  It does not appear on the admin or any account of my other children. (parent) account.

  I have tried to download a Web filter, but could not.  I wonder if this error message is the problem.  Even if this is not the problem with the download works do not, should not be there.  You can click on the x to close the box (it always appears twice) and then open Mazilla Firefox, etc.

  What is going on?? Can you help me?  Thank you!!

  Google has nothing for it; normally, who points to him being Malware...

  ·                                 You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that the Perform quick scan option is selected and then click on the Scan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button to view the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner