error 651 in windows 7

Similar Questions

• Error 651 Windows 7

  This only happens when I'm trying to connect to Internet wireless.  Everything is ok with the Ethernet cable.  Any ideas on how to fix, please?

  Please visit: Microsoft Community - "error 651 in windows 7"

• Satellite C660D - error 651 attempts to connect to the internet via modem

  Hello

  I'm so stupid with this stuff so please make all responses for a 3 year old can understand.

  The problem - since a few years, I used a desktop computer and connected to the internet via modem wide empty tape and USB connection. Last week bought a Satellite C660D installed Windows 7 os provided and tried to connect with my modem, but failed miserably.

  I get the error message 651 but do not understand why.
  I use wired ethernet (because my friend does on their laptop) and tried the cable on their system, and it worked very well, so I don't think it's that.

  If someone is kind enough to explain what I do, I'll be able to keep this computer connected to the internet with usb and connect the laptop with an ethernet at the same time, so I can read the instructions while I go or I'll have to print the instructions and disconnect the Office before retrying the laptop? Yes, I'm dumb and I'm not even blonde, lol

  Thanks in advance for those who have the patience to try to help me.

  Hello

  Don t think that it s question computer laptop since many different users of the internet have reported the same error message with different but with pre-installed computers Win 7.

  There is no one-size-fits-all solution for this
  See this page:
  http://techietalkz.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

  There are several tricks to get this fixed an error
  For example: remove the Microsoft Virtual PC 2007 or disabling IPv6 for your connection.

  You will need to check the unique proposals would be interesting to know what will arrange in your case

• Error 651 - Help me please

  I have a desk top, Windows 7, keeps changing my supplier to Intel - Network 2.  I tried all the instructions advised on this site of the community without result.  I called Microsoft Support and they said they could fix it, but it would cost me $50 or more if I allowed them to access my computer.

  It of just crazy, they know that the problem exists in their program, why should it cost me money for them to fix it - sell me a fix it program for up to $150 - when I refused, that was the end of the conversation.

  I want to go back to my provider Cogeco Broadbent... but it does not take any measures.  I'm totally upset with Microsoft, they're making a fortune on a program with a glitch in ity and then want money to solve the problem.

  Someone else's experiences of this type of service?

  See if these instructions allow to solve your problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/error-651-in-windows-7/65077414-15f8-450b-bd19-5cce9a57fcf0

  J W Stuart: http://www.pagestart.com

• Error 651: Unable to connect to the internet

  I use Windows 7 on a new laptop Dell. However, I can access is the internet using my broadband connection.

  When I try to connect, it tries to connect through Wan Miniport PPPoE, then fails citing error 651.

  A previous post said that this would be fixed if I disabled Hello.
  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/519b794f-3f32-4A0A-8e47-81918243c0b7?Prof=required

  However, I opted to remove it and I still don't have the same problem. I can't download multiple updates, corrections or problems that I can't get online... it basically makes my computer useless.

  No one knows how to fix?

  Hello dookdb,

  Take a look at the link below, this might be useful for you,
  http://ghost301tech.WordPress.com/2009/10/29/error-651-in-Windows-7-a-killer-for-Internet-ConnectionVPN/

• Windows 7 error 651 on computer newly built

  My son just to build a new office with Windows 7.  When connect us to our router, we get an error 651.  Any ideas how to fix?  Thank you!

  DS

  Can we get some information (newspapers)

  1 - event viewer

  2 - minitool

  Please provide us with your administrative Event Viewer logs by following these steps:
  Press Win + 'R' and type eventvwr > enter
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit
  
  Navigate to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  Please download this app from the
  Run it
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• I keep getting error 651 trying to make a wired connection

  original title: I keep getting error 651

  I keep getting error 651.

  I replaced the system of rasPPPeO several times with a workgroup file in Vista and still no connection. After the file system is replaced, I get a new icon in a wide area network wan miniport for Device Manager. When this driver is searched, windows gives me an error of installation. Its a out of the box motherboard, all the drivers are up to date. However, no link. I am connected via the wireless, but I need a wired connection. How can I solve this frustrating problem?

  You have posted in forum Windows 7, saying: you have replaced a file system with that of Vista.  That sounds like it's likely your problem.  You don't have anyway normally just replace system files.  You install the drivers. I suggest that undo you what you've done for system files and get the correct driver for your NETWORK card installed.

  Good luck.

• (Redirected) No internet: error 651

  Hello world! I formatted my secondary 1 to drive HARD and installed ISO image file windows 7 pro. Windows work fine. Except Internet.  Error 651. Is it possible to solve this problem without any third party software? I have already searched all the internet and fined a lot of advice but no luck. My internet provider is Verizon.  Computer connected to the router. Old vista HARD 250 GB OS drive works fine, Internet Ok! Broadband ID and password to install Ok and no connection. Error 651.

  Please help if possible.

  Thanks in advance.

  Val.

  Better to post this in the networking, Internet, forum of wireless, here:

  http://en.community.Dell.com/forums/3324.aspx

  Bev.

• Error 651 ethernet but ok when wireless

  I bought an ASUS laptop 8 months ago with Windows 7 installed. It was working fine when connected by ethernet to a router, just recently (maybe a month ago), that I turned on my laptop and it showed that it was not connected. So, I restarted and still the problem. I went through a trouble shooting process to shut down the computer and disconnect the cable from the computer is off the router for a few minutes then plugged everything and checked, still does not work. So, I decided to use a netbook, I had to check that maybe it was the cable, it was not. I plugged the modem with the ASUS, and it did not work. So, now that I knew that it was something to do with the computer, I started studying why. I noticed that I didn't have a "connection to the local network' just a"manage wireless networks", 'change the map settings' and change advanced sharing settings. So, I tried maybe set up a new connection to the router with the ethernet and every time I tried to set up a new network to the router, I got a message "error 651". I was confused, so I searched through my wifi online - since I've always had the wifi - and I continued to get something on exchanging information with Vista drivers driver but why would I want to change a new operating system with an old driver? I don't know why I do not have a 'Connection to the local network' tab or even connect to the ethernet connection? Same connection when I use Linux, it connects via ethernet. Anyone can shed some light on my problem? If you want more info I can try to give it do you. I went into Device Manager, but I still can't find a local connection tab. I know usually automatic Windows to connect to the device its connected to.

  Hi JoeJ1986,

  • Did you try to run the troubleshooter and to uninstall and reinstall the network card using the steps above?

  Connection to the local network should be present even if its connected through wireless. However, try to uninstall the network adapter, and then reinstall it and check if it works.

  Alternatively, you can try to check if the network connection and the list of network services are started and set to automatic. To do this follow the steps below:

  1. Click Start.
  2. In the start search box type services.msc and press enter
  3. In the services window, do scroll down to the network connection.
  4. Right-click on it and click Properties.
  5. Check if the startup type is set to automatic, otherwise it is set to automatic.
  6. Click the Start button, this will start network connection services.
  7. Click on apply and Ok.

  Repeat this procedure for the network list service and check that it helps.

  I hope this helps. Let us know the result.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• I can't fix error 651 by replacing the file raspppoe.sys as I don't have admin rights to System32/Drivers. What can I do?

  I get error 651 on WIndows7. I tried to replace the raspppoe.sys file as it was recommended, but I am unable to do this since I don't have administrative rights on System32/Drivers.
  Please, advise.

  Hello

  Unfortunately, you will not be able to rename system files or folders without administrator privileges. To rename and solve the problem, try to connect as an administrator and try to rename the file system.

  Also, try the following steps to take over the file and then try to rename the file system:

  1. Open Windows Explorer and locate the file or folder you want to take charge.
  2. Right-click on the file or folder, click Properties, and then click the Security tab.
  3. Click Advanced, and then click the owner tab.
  4. Click Edit, and then do one of the following:
     • To change the owner to a user or group that is not listed, click other users and groups , in area enter the object name to select (examples), type the name of the user or group, and then click OK.
     • To change the owner to a user or group that appears in the area of change of ownership to , click the new owner.
  5. (Optional) To change the owner of all subcontainers and objects in the tree view, select the check box Replace owner of subcontainers and objects .

  For more information, visit this link: http://technet.microsoft.com/en-us/library/cc753659.aspx

  I hope that helps!

• After installing Visual Studio have not access to internet - error 651

  OK so I have windows 8 and after the installation of Visual Studio, I can't access the internet, I can connect to wifi but not internet. When I try to connect broadband I get error 651. Please help me I don't want to reset windows because of this.

  Original title: error 651

  Hi Antonio,.

  Are you using a 3^rd party antivirus application on your computer?

  Error 651 indicates the Modem (or another connection device) has reported an error. Refer to these steps in the order in which they are presented, and check.

  • Reset the TCP/IP settings.
  • If you are using a portable computer, make sure that the wireless switch or button is turned on.
  • Replace the RAS PPPoE driver:
    1. Open an administrator command prompt.
    2. Select all the code below, then right-click and click on copy:
    3. TAKEOWN /F "" C:\Windows\system32\drivers\raspppoe.sys".
       ICACLS "C:\Windows\system32\drivers\raspppoe.sys" / grant administrators: F
    4. Right click in the command prompt window, and then click on paste.
    5. Press ENTER.
    6. Once it is finished, close the command prompt.
    7. Go to the following folder:
       C:\Windows\System32\Drivers
    8. Rename the raspppoe.sys raspppoe2.sys
    9. Right-click on the following file and click on save target as / Save link as: old
       RAS PPPoE Driver.
    10. Save it in the folder C:\Windows\system32\drivers.
    11. Restart the computer.
  • If you use a Modem, get the latest driver.
  • Reset your router.
  • Re-install your network card drivers.

  Refer to the following for more information on reset TCP /IP.

  How to reset TCP/IP using the NetShell utility.

  http://support.Microsoft.com/kb/299357/en-us

  Wireless and wired network problems.

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-81&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   
  I suggest that power you cycling your Modem and router might solve the problem, here are the steps:

  1 save all your current work, close all open applications, then shut down your computer. Wait a minute.
  2. Firstly, turn off your router and wait a few minutes.
  3. turn off your modem.
  4. disconnect all the Ethernet cables are connected to the router and the modem and the PC.
  5. reconnect them and ensure that there is no connection drop between them.
  6. now, turn on your PC and let it boot.
  7. turn on the modem first and once it is initialized, switch on the router.

  For the Windows questions or issues, please get back to us. We are here to help you.

• Satellite C50 - A - metered connection - error 651

  Recently had Qwest replaced the modem/router. After the replacement of the Satellite shows the limited connection with error 651 reported on troubleshooting. The new modem/router works with Smartphones and with my Toshiba Netbook but not the Satellite.

  The following actions have been taken without success to establish the connection.
  -Firewall disabled
  -verified drivers network
  -complete security analysis
  -restoration sys
  -fragmentation verified
  -power settings

  Ethernet connection only works in safe mode.

  Any suggestions?

  I found this MS article knowledge base on the 651 error.
  https://support.Microsoft.com/kb/2716537

  There is also a discussion in the Microsoft forum on this similar issue:
  http://answers.Microsoft.com/en-us/w...f-5725a916556f

  Activate and deactivate airplane air mode has also helped establish the connection.

• ATI error and no windows - Satellite Pro A60

  Hello

  When I start my computer, I get a blue error screen c0000415
  A quick google reveals that this is one of these: http://support.microsoft.com/kb/832324

  "So what are you bothering? I hear you cry - the problem I have is, in getting this error of the other (also the ATI card based) I stuck my red disc in and erased everything - including the windows... and CFLA error occurs before windows installs and SafeMode (-that worked perfectly before) does not work because windows is not installed!

  Oh the fun.

  "I think it's a hardware error" - Yes so don't I... However, before the reinstall and get it back, I could work to the computer in safe mode and videos played very well with the resolution and full color. Am I missing the point if I think a video work is an indicator of a working video card?

  I admit that I'm perplexed indeed. I'll try to dig up an old Windows 98 drive, but I don't know how much this will help, because the only copy of XP I have is on the recovery disk... [Return to step 1]

  Any suggestions much appreciated - thanks in advance...

  [it's a satellite pro A60 w / 256 +?] RAM, processor celeron 2.8 Ghz, ATI Mobility Radeon 7000 etc...]

  Hello

  As suggested in document of Microsoft this problem can occur if an ATI Radeon 7200 graphics card has been installed on your computer and the driver that is supplied with this adapter may not work correctly with Windows XP.
  The installation of SP2 should help.

  This statement of Ms. says it all! It of not a hardware problem but it is a compatibility issue with Windows XP (without SP2) and the driver radeon ATI 7200.

  You should try to get an original CD of Windows XP with or without SP2.
  The software callednLiteallows you to create a Windows clean boot CD and add the patches MS and service packs for this CD.

  Then, you can try to boot this CD and after installing the OS, you need to update or change the graphics driver!

• My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  My emails are not sent and I get an error message - error 550 server windows live mail error ID 0x800ccc79.

  Your help would be greatly appreciated

  Thank you

  original title: network

  Hello GerryBenjamin,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• All 32-bit applications crash with error 0xc000005 after windows Server 2008 R2 backup

  Hello world...

  I am in a big mess... and really need help!

  I did last night a Backup windows... but one of my users were connected to the server works with applications...

  and this morning No 32 no bits applications... same installer...
  the 64-bit application works very well...

  Others or generating an error 0xc000005 and stop...
  failing Ole32.dll module...

  And I'm sure that the backup is reliable, even if the backup of windows said it was successful...

  I tried to restore only the apps files... but it seems more complicated than that...

  If anyone has an idea...

  Hi, Emeric,.

  Thanks for posting the question on Microsoft Community.

  According to the description, it seems that 32-bit applications crash with an 0xc000005 error code in Windows Server 2008.

  As the question more appropriate forums Technet, write the topic in this forum for better support.

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

  Using the windows-related issues feel free to post on Microsoft Community.