error 7 - a common frustration due to the weakness of open file + .vi

Similar Questions

• 2gbsparse backup due to the limit of open files errors

  Question: Is there a way to change the limit nofiles in ESXi 4.0 + so that it persists through a reboot?

  On large files VMDK vmkfstools fails with: doesn't have to clone the drive: the limit of the host to open files (40)

  I understand that this is because of the setting nolimit, before be reduced to 256 in ESXi 4.0 + compared to ESXi 3.5, which is the value 4096.  In order to be able to backup up to a 2 TB disk, I would like to change this setting to 4096.  [Fuzzy math: (2 TB vmdk / 2gbsparse) + locker hidden files = ~ 4096].  I failed to find a permanent adjustment for this.  Run the command 'ulimit-n 4096' in rc.local does not work either.  I tried to add the same command in the script of ghettoVCB as well, who does not work if the script is running from a cron job.  I have something that seems to work, but it's messy.  I added a line to the ghettoVCB.sh script that says: source vmfs/volumes/< datastore > /ghettoVCB/set_ulimit.sh

  set_ulimit.sh looks like this:

  #! / bin/ash
  ulimit-n 4096

  I think that if I could run the ulimit command from cron or in rc.local I could bring the necessary change without adding lines to the script of William.  However, this command can be entered interactively or automated methods are reluctant to not having the absolute path (which I can't find it).  The ulimit command seems to be a hidden built-in to busybox.

  nofiles limit is attached to a process and not to the entire system.

  In other words, each process has its own limits.

  When a command in a shell script, the fork itself, the parent will be ready to deal with the following command and the child set up the environment for the new process, including the limits set by ulimit and then run the command waited.

  ulimit [-HSTabcdefilmnpqrstuvx [limit]]
  Provides control over the resources available to the shell and the process started by
  it, on systems that allow such control.

  Usually a process inherit the limits of its parent.

  Concerning

• Email problem: Error 550 - 0x800CCC69 - Message rejected due to the reputation of the sender's IP

  Hello

  I have a problem running Outlook Express in WinXP SP3. I can receive but not send an email, I got the error next message when sending email:

  Error 550 - 0x800CCC69 - Message rejected due to the reputation of the IP of the sender (or words to that effect, at least)

  I have other messages on the forum the impression is that this error occurs usually when there is a suspicion that an e-mail account is used to send the spam, but I talked to our ISP and email provider (this does not relate to a Hotmail address) and they said that there is no problem from their point of view , and it must be something to do with OE. We also checked all the settings of the ISP account and everything is perfect.

  Can anyone offer any help?

  Thank you

  This error message comes from your ISP. They refuse to relay messages. Unless you are not connected to your ISP directly, IOW, sending another address through your ISP, they have blocked you.

  Remember their service tech and ask to speak to a technician level 2.

  P.S. When an error message in question, please copy and paste in your message. Wording right can make a difference.

  Bruce Hagen
  MS - MVP October 1, 2004 ~ September 30, 2010
  Imperial Beach, CA

• I try to download a plug-in or patch to address the inability to open files in Photoshop CC 2014 RW2. Try AdobePatchinstaller, I get an error of installation. Any advise?

  I try to download a plug-in or patch to address the inability to open files in Photoshop CC 2014 RW2. I try AdobePatchinstaller but keep, we get an install error. Any advise?

  Thanks but the problem has been fixed. Adobe technical support led me through the process of updating all my apps.

  a r 2 0 1 4 o

• vmkfstools ' cannot open 'exch01_3.vmdk': has reached the limit of the host to open files (40).

  Hello

  We try to restore a virtual Exchange computer from a backup of virtual machine BE files. Download us all files for the data store and inventory of the virtual machine. We got an error when you try to turn on the virtual machine

  Power DevicePowerOn module has failed. Failed to create virtual SCSI devie to scsi0:0.

  VMware technical support has helped/Showed me how to reformat the VMDK using VMKFstools and show in this KB

  http://kb.vmware.com/selfservice/microsites/search.do?language=en_us & cmd = displayKC & externalID = 1028943.

  There are 4 disks and disk cloning first 3 succeeded, but the last of them failed with the message "unable to open 'exch01_3.vmdk'. Reached the limit of the host for open files (40).

  The environment is ESXi 4.1.0

  Is there someone out there who knows how I can get this last drive for clone properly?

  Any help is appreciated.

  Thank you

  Craig

  It is probably caused by the block size VMFS for the target data store. In order to allow greater than 512 GB files the size of the block on a VMFS3 data store must be at least 4 MB. You have an another data store with a block size of 4 MB (or 8 MB)? If so, create a folder named on this data store for the hard file and run vmkfstools as target using that store of data/folder.

  André

• To-do bar display of the names of open files

  In Windows Vista, it used to display my documents open in the taskbar with all instances of applications (such as IE) and the names of open files. Windows 7 is not that. Is it possible to restore that? I find it really useful to the click on the right app or the document I want to open.

  David

  Anchorage Alaska

  Right click on the taskbar-> properties-> Taskbar Button :-> select never combine-> Apply-> OK

  See if that helps.

• With Move-VM error: operation is not valid due to the current state of the object.

  I only started shows after update to PowerCLI v5.1.  My vCenter is v5.0.  I saw this when moving virtual machines to a data store in a different data store cluster.  The task submits to vCenter successfully and ends, but the Move-VM errors and returns control to the script or command line that ran.

  $> Move-VM - VM somevm Datastore - somedatastore - confirm: $false
  Move-VM: 13/11/2012-16:07:45 operation Move-VM is not valid due to the current state of the object.
  On line: 1 char: 1
  + Move-VM VM - somevm - data somedatastore store - confirm: $false
  + ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  + CategoryInfo: NotSpecified: (:)) [Move-VM], VimException)
  + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVM

  I'm puzzled.

  Do you by chance have a PowerShell v2 available somewhere where you can run the same script?

  As much as I know there no official PS still in PowerCLI v3 support, although there are only a few known minor pitfalls.

  While clutching at straws

• Error downloading Photoshop element 12: Arvato Berthelman - Download Manager error - unfortunately, there is a problem with the link to that file. This problem may be due to the number of users trying to download

  Error message when downloading Photoshop element 12: (I bought the license in a store)

  Berthelman arvato-

  Download Manager error-

  Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200

  == > Les DEUX @ and phone number are fake!

  Hi Mireille56,

  The place where you are trying to download the software.

  [email protected] is not an email from Adobe Support.

  Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

  < translated="" via="" google="">

  Hi Mireille56,

  Where you are trying to download the software.

  [email protected] is not an Adobe support email.

  Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

• Error on change of password due to the expiry at the first login - bug?

  Hello
  
  When I create a new user to the workspace in a workspace by using the default password policy and set their password expires on first use, thus prompting a change of password, if the user specifies a password that violates the strong policy, they returned to the login screen of workspace with no indication that the password change was not accepted because it violates the strong policy. The user must connect with the original (unchanged) password, prompting so a change of password again once and they were beaten in a loop without clear indicator as to why.
  
  If a password that passes the strong policy is used, there is a message stating that the password has been changed successfully and the user name can now work space with their changed password.
  
  At this point if a change of password is requested by the user after the notation in the workspace, and a password that violates the strong policy is provided, a message appears saying that it violates the strong policy and why (which is what I expected to see when the password for the first time as described above). If they provide a password that passes the strong political, the password is accepted, a message is provided indicating this.
  
  We use the Apex Apex listener 1.1.3 and GlassFish 3.1 4.1
  
  I have reproduced this in our community Dev, stage and Prod. I have not tested with OSH, but am posting this now in case there is a problem?
  
  Thank you
  
  Alan

  Hi Alan,

  Thanks for reporting this. I can also reproduce in 4.1.1 and filed a bug.

  A quick glance shows that Apex successfully intercepts the password breach, but try to re - view the 4350:68 with errors inline page. This re - will the Sentinel of the session, which determines the session is invalid and redirects to the login page.

  Kind regards
  Christian

• Windows 8 KB3000850 update fails to update due to the corruption of system files in MSDTC.log

  Greetings,

  I seem to have a serious problem with corruption of system files. And before anyone suggests, I ran the SFC and MARIKEL, can repair corruption. Corruption occurs in the MSDTC.log file and causes the update to KB3000850 to not settle. I know that it is the source of the problem, because I checked in the CBS. I'll copy and paste the appropriate section below.

  2014-12-06 20:58:07, error CSI 00000f3a (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646929 # to Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile(flags_=_0,_handle_=_{provider=,_handle=0,_name=_("null")}, da = (SYNCHRONIZE |)) FILE_WRITE_ATTRIBUTES), oa = @0x5999ddd310--> OBJECT_ATTRIBUTES {s:48; rd:; on: [9] "MSDTC.} JOURNAL "; a: (OBJ_CASE_INSENSITIVE)}, iosb = @0x5999ddd3b8, as = (null), fa = (FILE_ATTRIBUTE_NORMAL), his = (FILE_SHARE_READ |) FILE_SHARE_WRITE. FILE_SHARE_DELETE), cd = FILE_OPEN, co = (FILE_NON_DIRECTORY_FILE |) FILE_SYNCHRONOUS_IO_NONALERT | (0 x 00004000), eab = NULL, eal = 0, disp = invalid)
  [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f3b@2014/12/6:11:58:07.232 (F) base\wcp\sil\merged\ntu\ntsystem.cpp(2155): native STATUS_OBJECT_PATH_SYNTAX_BAD error of the function expression Windows::Rtl:SystemImplementation:DirectFileSystemProvider:SysCreateFile: (null)
  [gle = 0 x 80004005]
  2014-12-06 20:58:07, added CBS C:\WINDOWS\Logs\CBS\CBS.log WER report info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141202063835.cab info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201150922.cab info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201103812.cab info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201075150.cab info.
  2014-12-06 20:58:07, added CBS report WER C:\WINDOWS\Logs\CBS\CbsPersist_20141201073551.cab info.
  2014-12-06 20:58:07, info CBS unable to add pending.xml to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  2014-12-06 20:58:07, info CBS unable to add pending.xml.bad to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  2014-12-06 20:58:07 info CBS not able to add SCM. EVM to Windows error reporting. [HRESULT = 0 X 80070002 - ERROR_FILE_NOT_FOUND]
  2014-12-06 20:58:07, error CSI 00000f3c (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646928 # to Windows::Rtl:SystemImplementation:CSystemIsolationLayer_IRtlSystemIsolationLayerTearoff:TransferFile(flags_=_(ReplaceIfExists|)) OpenForBackupIntent), op = 'HardLink' [8], o = NULL, oname = [l:18 {9}] "MSDTC. The JOURNAL", ndir = @0x59b6067e78, name = [l:18 {9}]"MSDTC. The JOURNAL", disp = (null))
  [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f3d (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646819 # to CFileInstaller::DoComponentOperation (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f3e (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646818 # to CFileInstaller::ProcessComponentChange (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f3f (F) STATUS_OBJECT_PATH_SYNTAX_BAD #11646817 # PrimitiveInstaller::CCoordinator:ProcessChange(Change_6.3.9600.16384->_6.3.9600.17415_for_Microsoft-Windows-COM-DTC-Runtime,_pA_=_PROCESSOR_ARCHITECTURE_AMD64_(9), culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral) [gle = 0xd000003b]
  2014-12-06 20:58:07, CSI Info 000009 c 7 SMI primitive installer [completed]

  2014-12-06 20:58:07, error CSI 00000f40 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510400 # to CCSDirectTransaction::PerformChangeAnalysis (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f41 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510399 # to CCSDirectTransaction::PrepareForCommit (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f42 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510398 # to CCSDirectTransaction::GenerateComponentChangeList (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f43 (F) STATUS_OBJECT_PATH_SYNTAX_BAD #9510397 # to Windows::COM:CPendingTransaction:ExtractInformationFromRtlTransaction (...) [gle = 0xd000003b]
  2014-12-06 20:58:07, error CSI 00000f44 (F) HRESULT_FROM_WIN32 (161) #4340661 # to Windows::COM:CPendingTransaction:IStorePendingTransaction_Analyze (...) [gle = 0x800700a1]
  2014-12-06 20:58:07, error CSI 00000f45 (F) HRESULT_FROM_WIN32 (161) #4016881 # Windows::ServicingAPI:CCSITransaction:ICSITransaction_Commit(Flags_=_47_(0x0000002f), pSink = NULL, disp = 0, coldpatching = FALSE) [gle = 0x800700a1]
  2014-12-06 20:58:07, error CSI 00000f46 (F) HRESULT_FROM_WIN32 (161) # 81441498 #4016880 by Windows::ServicingAPI:CCSITransaction_ICSITransaction:Commit(flags_=_0x0000002f,_pSink_=_NULL,_disp_=_0)
  [gle = 0x800700a1]
  2014-12-06 20:58:07, info CBS setting ExecuteState key: ExecuteStateNone
  2014-12-06 20:58:07, Pavilion Info CBS RollbackFailed setting to 0
  2014-12-06 20:58:07, info CBS Clearing HangDetect value
  2014-12-06 20:58:07, info CBS saved last overall progress. Current: 0, limit: 1, ExecuteState: ExecuteStateNone
  2014-12-06 20:58:07, info CBS configured poqexec of hanging from the SetupExecute.
  2014-12-06 20:58:07, info CBS Exec: restore operations because of a CSI pilot commit failure.
  2014-12-06 20:58:07, error CBS Exec: impossible transaction CSI hangs because transactions cannot be merged: 0 [HRESULT = 0x800700a1 - ERROR_BAD_PATHNAME]
  2014-12-06 20:58:07, CBS Perf info: all InstallUninstallChain.
  2014-12-06 20:58:07, Info CSI CSI Transaction 00000f47@2014/12/6:11:58:07.701 @ destroyed 0x59a2b9ab40
  2014-12-06 20:58:07, info CBS cannot run the chain of execution. [HRESULT = 0X800700A1 - ERROR_BAD_PATHNAME]
  2014-12-06 20:58:07, error CBS could not process the single-phase execution. [HRESULT = 0X800700A1 - ERROR_BAD_PATHNAME]

  In addition, my OneDrive has problems with commissioning. Stuck it doing. No idea if they are related. I tried to do a system restore to a restore point that several days ago, and he almost killed my computer. Somehow he damaged a file critical and would not start Windows, update the system would not work because it claims that the drive has been locked, he tried claiming my recovery media was not valid (it was originally windows 8 CD I used to install from), and finally I was able to get Windows to recover using the tool to restart system available on the CD. After reinstallation of updates, problems persisted. I don't know how to deal with this type of file corruption. Could someone please help.

  If you nead the SFCdetails, I can post them.

  I got exactly the same problem with the MSDTC.log. I finally just gave up any attempt to install the update. The tendency to blame the problems with this update on Avast (that I have not installed) have obscured the fact that there is something in this update that wreaks havoc on many computers Windows 8.1.

• Double-click on the PDF not opening files with

  Mac OS x 10.1.1 10.11.6/Acrobat.

  Suddenly does not open pdf files with a double click, I now open Acrobat and file > open.

  In addition, once they are open, they do not close by clicking on the small red dot, now, I have to go to file > close.

  Please don't suggest not to change the default open with file information - they already have all the default value of Acrobat.

  So frustrating!

  Hi castina15,

  Please install updates and then try to reproduce the problem:

  Update and patch 10.x Acrobat or Reader on Windows or Mac OS 10.x

  Kind regards

  Nicos

• How can I increase the size of the thumbnails when opening files?

  

  This is the view I get when I want to download a file on OS X' browser. I like the thumbnail view, but as you can see, they are too small.

  I don't mind showing photos of less - I want just a larger thumbnail view.

  How can I change this?

  Right-click in the folder and select "Show View Options."  In the menu box that appears, you can change the size of thumbnails in this folder.

• My files open to 176% zoom, is there any setting to reduce the size when opening files?

  My files open to 176% zoom, is there any setting to reduce the size, so I do not reduce to 100% every time?

  If you are the author of the files, then you have the option to set the tab view initial magnification settings in the properties of the Document.

  

• Run the Script to open files

  Hello

  I had once a script by this thread (http://forums.adobe.com/thread/962689)

  This script gets the files of a specific folder Indesign,

  now, I want to change this script, so it can be used for files already open Indesign.

  Here is the original script (with huge thanks to Muppet Mark)

  indesign #target

  function exportFolder() {}

  var i, InFolder, idFiles, doc, offSet, pdfPre, pdfFile;

  InFolder = Folder.selectDialog ("Where\'s ID files folder?');

  If (InFolder == null) {return ;}

  idFiles = inFolder.getFiles (' * .indd ');

  for (i = 0; i < idFiles.length; i ++) {}

  doc = app.open (idFiles [i]);

  offSet = doc.documentPreferences.documentBleedTopOffset;

  If (offset == 0) {pdfPre = app.pdfExportPresets.itemByName ("snit 3 mm LANNOO + slug')};

  If (offset == 3) {pdfPre = app.pdfExportPresets.itemByName ("snit 3 mm LANNOO + slug')};

  If (offset == 5) {pdfPre = app.pdfExportPresets.itemByName ("snit 5 mm LANNOO + slug')};

  If (offset == 10) {pdfPre = app.pdfExportPresets.itemByName ("snit 10 mm LANNOO + slug')};

  If (offset == 11) {pdfPre = app.pdfExportPresets.itemByName ("snit 11 mm LANNOO + slug')};

  If (offset == 12) {pdfPre = app.pdfExportPresets.itemByName ("snit 12 mm LANNOO + slug')};

  If (offset == 13) {pdfPre = app.pdfExportPresets.itemByName ("snit 13 mm LANNOO + slug')};

  If (offset == 14) {pdfPre = app.pdfExportPresets.itemByName ("snit 14 mm LANNOO + slug')};

  If (offset == 15) {pdfPre = app.pdfExportPresets.itemByName ("snit 15 mm LANNOO + slug')};

  If (offset == 16) {pdfPre = app.pdfExportPresets.itemByName ("snit 16 mm LANNOO + slug')};

  If (offset == 17) {pdfPre = app.pdfExportPresets.itemByName ("snit 17 mm LANNOO + slug')};

  If (offset == 18) {pdfPre = app.pdfExportPresets.itemByName ("snit 18 mm LANNOO + slug')};

  If (offset == 19) {pdfPre = app.pdfExportPresets.itemByName ("snit 19 mm LANNOO + slug')};

  If (offset == 20) {pdfPre = app.pdfExportPresets.itemByName ("snit 20 mm LANNOO + slug')};

  pdfFile leader = (doc.fullName.toString () replace (".indd", ".pdf"));

  doc.exportFile (ExportFormat.pdfType, pdfPre, pdfFile, false, ", false);

  doc. Close (SaveOptions.NO);

  };

  };

  exportFolder();

  Hi jocstone_me,

  I modified your JS code, please try the code below work.

  #target indesign
  function exportFolder() {
  var i, inFolder, idFiles, doc, offSet, pdfPre, pdfFile;
  inFolder = Folder.selectDialog( 'Where to save the InDesign files?');
  if ( inFolder == null ) { return };
  
  idFiles = app.documents.length;
  for ( i = 0; i < idFiles; i++ ) {
      doc = app.documents[i];
      doc = app.activeDocument;
      offSet = doc.documentPreferences.documentBleedTopOffset;
      if ( offSet == 0 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 3 mm snit + slug' ) };
      if ( offSet == 3 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 3 mm snit + slug' ) };
      if ( offSet == 5 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 5 mm snit + slug' ) };
      if ( offSet == 10 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 10 mm snit + slug' ) };
      if ( offSet == 11 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 11 mm snit + slug' ) };
      if ( offSet == 12 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 12 mm snit + slug' ) };
      if ( offSet == 13 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 13 mm snit + slug' ) };
      if ( offSet == 14 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 14 mm snit + slug' ) };
      if ( offSet == 15 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 15 mm snit + slug' ) };
      if ( offSet == 16 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 16 mm snit + slug' ) };
      if ( offSet == 17) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 17 mm snit + slug' ) };
      if ( offSet == 18 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 18 mm snit + slug' ) };
      if ( offSet == 19 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 19 mm snit + slug' ) };
      if ( offSet == 20 ) { pdfPre = app.pdfExportPresets.itemByName( 'LANNOO 20 mm snit + slug' ) };
      pdfFile = File(inFolder+"/"+doc.name.toString().replace( '.indd', '.pdf' ) );
      doc.exportFile( ExportFormat.pdfType, pdfFile, false, pdfPre, '', false );
      doc.close( SaveOptions.NO );
      };
  };
  exportFolder();
  

  THX,

  csm_phil

• Seriously the behavior strange opening file HAVE CS5 Mac

  I don't really know how to find solutions to this problem, but today when I opened a file existing art Illustrator immediately took a part of the project and gave him a white fill with black outline... I thought that I had pushed a button and accidentally caused cela, but when I hit undo, nothing happened. When I looked in the Edit menu, the selection of the cancellation was not available. Close the document without saving changes, leave IT and I has reopened the case. Same thing happened. Then I restarted the computer. Same thing. Opening a different file does not do. Check out the screenshots for before (screenshot of an overview of the Finder) and after (once the file is opened in Illustrator). When the file is opened, for a brief moment, all right and then something happens, and the document is converted. If I try to close the document, I request if I want to save the file (which I did not). Anyone can shed light on this strange behavior and how to fix it?

  Thank you!!!

  -g-

  It's the beforemath:

  

  It is the sequel:

  

  It almost seems that a script runs. I'm retired.