"Error 734 PPP link control led" not able to connect the Nokia N73 to internet.

Similar Questions

• Error 734 PPP link control protocol resulted.

  When I try to access the internet via bluetooth on my laptop I am getting error 734. I tried the options on the Microsoft support site and the error still exists. Can you suggest a few checks that can be performed to determine if the problem lies in the network or on my mobile bluetooth. Some suggestions to address this problem are also welcome.

  Hi SuryaChetan,

  Initially, I suggest that you call your cellular service provider to fix the problem at their end.

  I have more, I would like to refer to the following article if troubleshooting with your wireless service provider does not work.

  "Error 734: the PPP link control protocol was terminated" Error Message occurs if you try to establish a Dial-Up connection: http://support.Microsoft.com/default.aspx?scid=kb;en-us;318718

  Please let us know if you are able to solve your problem or need help. Theresa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Portege R600 - Error 734 PPP Link Control Protocol resulted

  We have a Toshiba Portégé R600-102 using an Orange 3 G SIM card configuration like a dial connection to * 99 # (APN: internetvpn) which works fine in Merseyside, however, as soon as our user takes it outside Liverpool (more precisely an hour outside on a trip to London by train) connection drops completely and does not allow the user restore the link giving the error 734 : The PPP link control has been terminated. If you use Toshiba wireless connections Manager it just says connection failed. The laptop won't re - connect to the 3 g network until the user is back near Liverpool?

  I spoke to Orange on what originally advised me to change some settings in dial-up access, but this made no difference, tried to contact Orange again today, but told me that they don't support any other models other than laptops they provide with internal 3 g modems.

  Any help would be greatly appreciated, let me know if you need more information.

  Concerning

  Andy

  Hi mate

  I googled a little and a big thanks to MS knowledge base.
  I found there an interesting document that describes the solution exactly for the error message you received:

  "+ Error 734: the PPP link control protocol was terminated" Error Message occurs if you try to establish a Dial-Up connection.
  http://support.Microsoft.com/kb/318718

  _Solution: _

  You have to disable negotiate Multilink for link simple connections check box.

  The option can be found in the connection to dial-up networking-> properties-> tab-> networking settings

  For more details, see the MS doc!

• Error 734: PPP link control has been terminated... always show upward when I try to connect to the internet... How do I solve this problem... I m using win 7 as my operating system.

  • I want to connect Internet usiang dial-up access. I m using nok * a modem n81as and telkoms * l as the map. When I m trying to connect it always failed and an error appeared and said: "Error 734: the PPP link control has been terminated. and I m using Windows 7 as my operating system. Please help me solve this problem.thanks a lot...

  the 734 error can be solved by adding a piece of code...

  On your laptop, open the list of devices and dpouble click on the unit matched BB... Select material and double click on blue tooth modem... Select advanced in the additional parameter, place the following code:

  + cgdcont = 1, "IP", "bb.telus.com"

  I'm on telus and by using a bold 9700... to determine the URL above, you BB select Option > Advanced Options > TCP/IP

  APN:BB. TELUS.com... in the code snippet above replace bb.telus.com by all that is not in your apn...

  try to connect

• Not able to connect the second monitor

  Original title: Second monitor visible only on the first plugin

  Implementation:

  New (Nov 2014) Lenovo PC

  AMD A8 H535

  Windows 8.1

  AMD Radeon HD D 7560 w / VGA output and an HDMI output

  Two HP w1907 monitors (resolution is identical on both screens - when they work together)

  Question:

  Last night I plugged my second monitor to the HDMI output with an HDMI adapter / VGA of the Amazon ( adapter ), plug the monitor into it has not come and via the control panel (I tried both via the control panel and some change PC settings) could not detect the second monitor. Then, I went to the HP website and downloaded the drivers, but to no avail. Then I reached down and unplugged the second monitor and resettled to make sure that there is a link, this solved the problem. The monitor came and no further investigation was necessary. However, this morning I woke up the computer to a single monitor and still unable to detect the second monitor. Only when I unplugged and re-inserted the link it works.

  I'm at the end of my rope and need help with this, thanks in advance for any help you can provide.

  Hello

   
  I understand that you are not able to connect the second monitor to the computer. This problem may occur because of outdated or damaged display card drivers.
   
  So I suggest to follow the steps mentioned below and check if help them.
   
  Method 1
  Please check the steps mentioned in the link below to check that everything has been done correctly to connect the second monitor.
  Plug a second monitor or projector
  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors

  Method 2

  Install all Windows updates and check if it solves the problem. You can check the below link to do.
  Windows Update: frequently asked Questions
  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ
   
  If problem still persists, go to method 3.
  Method 3
  Uninstall and reinstall the display driver and check if it helps. First download the display driver and save it to the computer. You can download the latest driver to display from the link below.
  http://support.AMD.com/en-us/download

  Uninstall the display driver, then reinstall it. Follow the steps
  mentioned below to uninstall:
  1. press Windows + R, type devmgmt.msc , and then click ok.
  2. now, find and click with the right button on the display driver and click Uninstall.

  Also install the catalyst for AMD. You can download it from the link below. http://support.AMD.com/en-us/download/desktop?OS=Windows%208.1%20-%2064

  Hope this information helps. Please get back to us if you need further assistance.

• not able to connect my nokia lumia 820 to my laptop with Windows 7

  Original title: lumia 820

  I am not able to connect my nokia lumia 820 to my laptop with Windows 7. Pls advice

  Hello

  The native software for the Nokia 820 is Windows Phone 8. You try to connect via the USB interface? Is there an error message or a given code? You might find more specific assistance to the Nokia support page, here: http://www.nokia.com/us-en/support/product/lumia820/ .

  Keep me posted and let me know how you fare.

  Kind regards

  BearPup

• Not able to connect the AIR-tour 1041N-A-K9 using windows 8

  Hello

  I use AIR-TOUR 1041N-A-K9 wireless Accesspoint it was controlled using the command Air-CT2504-k9 wireless.

  When I tried to connect to the access point using the Windows 8 machine was not able to connect,

  Is there someone who faced the same problem.

  Hello

  There is a known bug with Windows 8 connectivitiy problems with Cisco UWN.

  https://supportforums.Cisco.com/docs/doc-27213

  Can you please try the solution proposed in the document and see if it works?

  HTH,

  Patrick

• An unexpected error has occurred. Setup was not able to detect the Windows Media Player updates. Please try again later.

  I see the above error message when I try to update WMP. Windows 7 64-bit.

  There is no update, but you should just get a dialog telling you that.

  Is your Control Panel, Windows update works correctly?  I guess that it is not.  There are several current issues on Windows update does not work then search the forum for this if you don't think it's defective.

• Not able to connect the earpiece/headset Bluetooth for Wndows 7 Enterprise (64-bit)

  I tried to connect a new Bluetooth headset to my laptop Lenovo T420.

  The laptop runs on Windows 7 Enterprise SP1 (64 bit OS).

  The laptop has built-in Bluetooth adapter and I turned on.

  Also, I went ON my helmet and guarded in discovery mode.

  After that, I added the helmet using the button 'Add a device' from the control panel-> devices and printers.

  Windows 7 installed the drivers required and the headset is successfully added.

  Now, I tried to connect to the headset using Bluetooth configuration dialog window.

  I did a right click on the icon of headset to Panel-> devices and printers.

  The right click is not display the option 'control' for the headphones.

  He showed that other options - "Create a shortcut", "Troubleshooting", "Remove the instrument", "Properties".

  So, I won't be able to connect my Bluetooth headset.

  I tried the same helmet on my friend's laptop computer.

  His laptop is running on Windows 7 Home Edition (32 bit OS).

  The connected properly Bluetooth headset and the option 'control' is also available on the right click.

  The 'control' option provided the Bluetooth configuration dialog window where I can use the "connect" button to connect the headset.

  Kindly let me know the resolution of the issue.

  If your computer has built-in Bluetooth features, you can enable or disable the functions by pressing on Fn + F5. If you press Fn + F5, a list of the wireless features is displayed in the window Radio wireless.

  You can enable or disable the Bluetooth features with a single click.

  To use the Bluetooth features, double-click the icon of Bluetooth Favorites on the desktop and follow the instructions on the screen.

  You can use the Wireless Radio switch to disable Bluetooth features. The wireless radio switch is usually located on the front of the machine. If you have trouble with the Bluetooth, make sure that the wireless Radio switch is set to position it.

  Source: http://support.lenovo.com/us/en/documents/ht037001

  What is the number and the model of the Bluetooth headset? Enter the number of brand and model of your Bluetooth device in the search field provided in the link below, to see if there are compatibility problems reported.

  Windows Compatibility Center.

  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithUpdatedFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=windows%207&Type=Both&CurrentPage=1&TotalPages=133&ShowCriteria=0&Compatibility=Unknown&ProductName=windows%207

• Not able to connect the modem to the computer running Windows XP.

  Original title: I need help with my modom.

  My computer is not finding my modom.

  Hi RonaldCouch,

  1. What is the brand and model of the modem?

  2 did you connect the modem to your computer as soon as possible?

  You can follow these links & check if it helps.

  Connect using your modem

  Troubleshooting cable modems

  Hope the helps of information.
  Please post back and we do know.

• After that I changed the Duplex parameter on NIC's Service console, I am not able to connect the ESX host

  Hi all

  Please help solve my problem.

  After that I changed the Duplex parameter on NIC's Service console, I am unable to connect the ESX host. How can I reset the 100 MB NETWORK card duplex. Can someone help me please.

  Concerning

  Vijay

  Hello

  As the bulb you have two problems that are not related.

  (1) duplex setting, your switch and NIC must match. If one is assigned to auto-negotiation, then the other must be set to auto-negotiation. Personally, I tend to let auto-negotiation unless there is an absolute reason to spend. If you then turn on the both sides of the interface, the switch port and esxcfg-NICS allows you to change the duplex, etc.

  (2) passwords for root are not related to the network unless you have also run esxcfg-auth authentication remote.  The only time I saw what you have here is when the system is configured to try to authenticate remote and not locally.

  The two problems are fixable by booting into single-user mode, set the duplex and reset the password.

  Best regards
  Edward L. Haletky
  VMware communities user moderator
  ====
  Author of the book ' VMWare ESX Server in the enterprise: planning and securing virtualization servers, Copyright 2008 Pearson Education.
  Blue gears and SearchVMware Pro items - top of page links of security virtualization - Security Virtualization Round Table Podcast

• I am not able to connect the microsoft 5000 comfort after replacement of the cylinder head box

  The most original receiver that came with my keyboard Microsoft Comfort Keyboard and Mouse 5000 was lost. I bought another but I can't be connect with new cylinder head box. There are no buttons to push to try to sync, what should I do?

  Hello

  Take the battery out of a set because they can interfere with each other. On the basis of each mouse
  should be a little button that you can push with a pen point or a trombone (small white button near the battery
  door on the lower right side of mouse with Microsoft at the top). On the bottom of the keyboard here as in a
  button probably labeled 'Channel Connect'.

  When you press buttons on the receiver lights should Flash for a few seconds in rotation.

  Make sure you have the latest version of the Intellipoint and Intellitype software.

  IntelliType and Intellipoint - free
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Wireless Optical 5000
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=052

  There are 3 years warranty on the game in case you need assistance. Support for 90 days
  start at the end for 1 claim of warranty or incident.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• I was not able to receive the Windows Update since February 2012. I have a Code error 80070005.

  Error code 80070005

  I was not able to receive the Windows Update since February 2012. I have a Code error 80070005. What can I do to fix this?

  Hello

  Have you made changes on the computer before this problem?

  
  Try the following Microsoft article and see if it helps.
  
   
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update: http://support.Microsoft.com/kb/968003 
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry

• After three days of my 3g modem works fine, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped.

  Last week for mobile connection, I bought a 3G modem on my laptop. After three days, works very well, I can't access the internet more because of what follows: "Error 734: the PPP Link Control Protocol was stopped. It occurs when I try to establish a Dial-Up connection.

  I searched the Internet and found a section of troubleshooting on the Microsoft Web site. However, although I have followed all the steps, the error continues. I've already uninstalled and again installed the program, does not. I use Windows Vista Home Premium.

  What should I do now?

  original title: 3 G Modem

  Hello

  I suggest you to contact your internet service provider for assistance.

• When I click on VPN connection this "PPP link control protocol was stopped. (Error 734) ' appears, what should I do?

  When I click on VPN connection this "PPP link control protocol was stopped. (Error 734) "is displayed.

  The PPP link control protocol was terminated. (Error 734) For troubleshooting on measure for that information
  What should I do?

  Hello

  ·        Using a modem connection?

  ·        You did changes to the computer before the show?

  ·        Are you connected to any server?

  I suggest you to try the suggestion of linking and check if it helps:

  "Error 734: the PPP link control protocol was terminated" Error Message occurs if you try to establish a Dial-Up connection

  http://support.Microsoft.com/kb/318718

  Note: ignore the application of article.