Error 741 VPN

Similar Questions

• Windows Xp mode, error with VPN network VPN-Poly.

  IN windows Xp mode, I need to connect to the University through a VPN-VPN-Poly network. I did the config as told by the University, but the connection not is not made. says error connection to the VPN-Poly. Error 619. I tried several times to remove the connection and make again, but does not work. Please help I need this connection. The connection works in my Windows 7, but not in Windows Xp mode.

  Hi ZDullull,
   

  As the question is related to XP Mode, you will get better support in the Technet Forums. It is better suited for the IT Pro TechNet public.

  Please post your question in the Forums of virtualization in Windows 7 .

• Windows 7 error 809 VPN client

  Good day to all,
  First off, I want to thank everyone in advance for helping me with this problem. I am usually able to read through forums and usually lucky to find solutions, but this problem has no solution I found.
   
  Here's my situation. I have Windows Server 2008 R2. I added the role, the network policy and access to launch the VPN server. My clients windows 7 are able to connect locally to the server. I configured my router to allow the following ports: 500, 1701, and 4500. When I connect via the internet by using a client windows 7, I get error 809 (the network connection between your computer and the VPN server could not be established because the remote server is not responding).
  So, I decided to try another client. I am able to connect using my android via the internet without any problem. Only when I try to connect my clients to windows 7 I get this error. It seems that it has been configured correctly, but maybe I missed something. I have disabled the firewall on my server, client and router with no luck. So I started looking on the problem and was not able to find a solution to my problem. If anyone has other thoughts or ideas I'd be greatly appreciated the help.
  Thanks again.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  It will be useful.

• Error sending VPN tunnel

  Hello

  I have a VPN with satellite office. The user reported that session drops with my server @ DC. User is able to reconnect to a session and pick up where they have left off. This is why it seems as if the server did not realize that they were not yet connected. Can anyone provide technical expertise on the enigmatic question?

  This could be the cause of these errors?

  Router # 891

  crypto ISAKMP policy 1
  BA 3des
  preshared authentication
  Group 2
  isakmp encryption key 6. #@ $# ^ $% @(@*#) IP (remote Peer)
  !
  !
  Crypto ipsec transform-set MY esp-3des esp-sha-hmac
  !
  MY_VPN 10 ipsec-isakmp crypto map
  defined by the peers (remote Peer IP)
  transformation-MY game
  match address ACL_MY_VPN

  interface FastEthernet8
  OUT of THEIR internet description
  address IP (Ip address) 255.255.255.128
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  automatic duplex
  automatic speed
  card crypto MY_VPN

  ACL_MY_VPN extended IP access list
  allow an ip 10.x.220.0 0.0.0.255
  allow an ip 10.x.221.0 0.0.0.255
  allow an ip 10.x.222.0 0.0.0.255

  ROUTER891 #sh crypto ipsec his

  Interface: FastEthernet8
  Tag crypto map: MY_VPN, local Peer addr (address ip x.x.x.x)

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (10.x.220.0/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
  current_peer (ip address z.z.z.z) port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: 887637, #pkts encrypt: 887637, #pkts digest: 887637
  #pkts decaps: 992370, #pkts decrypt: 992370, #pkts check: 992370
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
      Errors in #send 8, #recv errors 0

  local crypto Peer endpt. : (the ip address x.x.x.x), remote Start Peer crypto. : (ip address z.z.z.z)
  Path mtu 1500, mtu 1500 ip, ip mtu BID FastEthernet8
  current outbound SPI: 0xED21C8D0 (3978414288)
  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:
  SPI: 0x3FC8FC31 (1070136369)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 37, flow_id: VPN:37 on board, sibling_flags 80000046, crypto card: MY_VPN
  calendar of his: service life remaining (k/s) key: (4580137/3089)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0xED21C8D0 (3978414288)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 38, flow_id: VPN:38 on board, sibling_flags 80000046, crypto card: MY_VPN
  calendar of his: service life remaining (k/s) key: (4580098/3089)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:

  outgoing CFP sas:

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (10.x.221.0/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
  current_peer (ip address z.z.z.z) port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: 18753258, #pkts encrypt: 18753258, #pkts digest: 18753258
  #pkts decaps: 16815594, #pkts decrypt: 16815594, #pkts check: 16815594
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
      #send 3438, errors #recv errors 0

  local crypto Peer endpt. : (the ip address x.x.x.x), remote Start Peer crypto. : (ip address z.z.z.z)
  Path mtu 1500, mtu 1500 ip, ip mtu BID FastEthernet8
  current outbound SPI: 0x58A07B0 (92932016)
  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:
  SPI: 0xAE72C947 (2926758215)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 41, flow_id: VPN:41 on board, sibling_flags 80000046, crypto card: MY_VPN
  calendar of his: service life remaining (k/s) key: (4398843/3128)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0x58A07B0 (92932016)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 42, flow_id: VPN:42 on board, sibling_flags 80000046, crypto card: MY_VPN
  calendar of his: service life remaining (k/s) key: (4398881/3128)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:

  outgoing CFP sas:

  protégé of the vrf: (none)
  local ident (addr, mask, prot, port): (10.x.222.0/255.255.255.0/0/0)
  Remote ident (addr, mask, prot, port): (0.0.0.0/0.0.0.0/0/0)
  current_peer (ip address z.z.z.z) port 500
  LICENCE, flags is {origin_is_acl},
  #pkts program: 3500166, #pkts encrypt: 3500166, #pkts digest: 3500166
  #pkts decaps: 3654295, #pkts decrypt: 3654295, #pkts check: 3654295
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 0, #pkts compr. has failed: 0
  #pkts not unpacked: 0, #pkts decompress failed: 0
      Errors of #send 1565, #recv errors 0

  local crypto Peer endpt. : (the ip address x.x.x.x), remote Start Peer crypto. : (ip address z.z.z.z)
  Path mtu 1500, mtu 1500 ip, ip mtu BID FastEthernet8
  current outbound SPI: 0xDE39F6D3 (3728340691)
  PFS (Y/N): N, Diffie-Hellman group: no

  SAS of the esp on arrival:
  SPI: 0xDFC9D904 (3754547460)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 39, flow_id: VPN:39 on board, sibling_flags 80000046, crypto card: MY_VPN
  calendar of his: service life remaining (k/s) key: (4547977/3107)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  the arrival ah sas:

  SAS of the CFP on arrival:

  outgoing esp sas:
  SPI: 0xDE39F6D3 (3728340691)
  transform: esp-3des esp-sha-hmac.
  running parameters = {Tunnel}
  Conn ID: 40, flow_id: VPN:40 on board, sibling_flags 80000046, crypto card: MY_VPN
  calendar of his: service life remaining (k/s) key: (4547976/3107)
  Size IV: 8 bytes
  support for replay detection: Y
  Status: ACTIVE

  outgoing ah sas:

  outgoing CFP sas:
  ROUTER # 891

  Send errors increase when the traffic matches a policy but IPsec SA was not yet up. I'm not aware of any other circumstances.

  It's a long shot, but it is possible that there is generate a new key stage 2 don't not taking place or not quick enough which causes part of the traffic to fall while the new IPsec security association is being negotiated. What could explain what users, see but... it's a long shot.

  I would look first for other reasons.

• Java error securityexception VPN Web

  Hello

  I have a problem with my Cisco ASA 5510 clientless SSL Webvpn.

  After Oracle updates its Version of Java, our Portal Web JAVA ist not working completely.

  Our SSL Web portal without client runs on a Cisco ASA 5510 with Version 9.1.3.

  On this portal, we provide Plugin JAVA RDP and Citrix Plugin JAVA.

  All Java Plugins are working with Java 7 update 25.

  But with the new Version Java 7 update 45 it does not work.

  It comes the following error.

  -----------------------------------

  "SecurityException.

  com.sun.deploy.net.JARSigningException: Unsignierter entry found in resource:

  https://xxxxxxx/ICA/JICA-configN.jar

  ---------------------------------

  XX = our portal-url

  Anyone has the same problem?

  I need a solution, because we use this solution for user about 200 round.

  Thank you very much.

  Florian

  ASA WebVPN Java Plugins fails after upgrading to Java 7 update 45
  CSCuj88114

  Sent by Cisco Support technique Android app

• Unable to connect to the VPN server

  Hello

  I'm on Sierra, iOS macOS 10 and Mac OS Server 5.2 (on a Mac mini).  (All dated September 21, 2016)

  Because PPTP is no longer supported, I am trying to create L2TP.  Unfortunately, when I try to connect to the server, I get the error "the VPN server has failed. Please check the server address and try to reconnect. »

  I do not think it is a problem of networking: back to my Mac is not enabled, the appropriate ports are transmission (UDP 500, 1701, 4500) and server says that the service is accessible.

  When I check the logs from the server after a connection attempt, I find:

  21/09/16 21:08:09.994 raccoon [75993]: can't find configuration.

  21/09/16 21:08:13.285 raccoon [75993]: can't find configuration.

  21/09/16 21:08:16.578 raccoon [75993]: can't find configuration.

  21/09/16 21:08:19.884 raccoon [75993]: can't find configuration.

  Any suggestions?

  Does anyone know where the configuration file is supposed to be on the server, so I can look at?

  Thanks for your help!

  Hi Rick,

  -Check that the folder/etc/racoon exist and the folder contains psk.txt and racoon.conf.

  -Installed with the operating system.

  Cheers, dwbrecovery

• Unable to connect to the printer, VPN is blocking my computer

  try to connect the printer to the computer. says error meesage VPN crashes my computer. What should I do?

  How do you connect your computer to your printer?  Ethernet?  USB port?

  One thing you can try is to go to the Panel "Printers and faxes", right-click on your printer, select "Properties".  When the Properties window appears, click the "Advanced" tab  Try to select the option "print directly to the printer", then OK your way out.

  HTH,
  JW

• Unable to connect to the VPN

  I can not connect from home (Windows 7 Starter Edition) at the office of the wife (WinXP Home) via a VPN connection.

  Follow-up of the installation a new connection wizard. Unable to connect with the new account (done in the vpn Wizard. Unable to connect with an existing account on the server VPN system either. I am able to connect from another system of home to the system that hosts the server VPN using pcAnywhere.

  Or the other attempt gives an error 800 - VPN tunnel failed.

  Any ideas on where to start looking?

  I can not connect from home (Windows 7 Starter Edition) at the office of the wife (WinXP Home) via a VPN connection.

  Follow-up of the installation a new connection wizard. Unable to connect with the new account (done in the vpn Wizard. Unable to connect with an existing account on the server VPN system either. I am able to connect from another system of home to the system that hosts the server VPN using pcAnywhere.

  Or the other attempt gives an error 800 - VPN tunnel failed.

  Any ideas on where to start looking?

  See this section of the RRAS team blog...

  http://blogs.technet.com/rrasblog/archive/2009/08/12/troubleshooting-common-VPN-related-errors.aspx

  More than likely the XP box is behind a firewall/router which does not pass traffic GRE protocol 47 . You can test the VPN PPTP link by running the test detailed in the traffic VPN PPTP Ping and secitons on this page.

  http://TechNet.Microsoft.com/en-us/library/bb877965.aspx

  GRAP the pptpsrv.exe and pptpclnt.exe programs on the internet or from a CD of XP SP2. If the tests fail work arounds include...

  * Update the firmware on the router to a version known to pass traffic GRE protocol 47.

  * Flashing the router, if supported, with third-party firmware like DD - WRT that supports passing traffic GRE protocol 47.

  * Buying a router known to pass the GRE protocol traffic.

  * Use an alternative such as Secure Shell [SSH] and a free SFTP client such as WinSCP or TBM for secure remote access to files and folders or Remote Desktop/access control to computers on office's LAN.
  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• OSX 10.11.3 can't VPN via AnyConnect 3.1.14018 iPhone6 ASA 5550 Verizon hotspot

  I did a lot of research on this, found similar questions, but not this exact one.

  I have a Mac OSX 10.11.3 using Cisco AnyConnect 3.1.14018.  It can VPN to our ASA version sw 8.2 (5) 55 perfectly fine on any LAN or Wifi.  He cannot complete a VPN connection using an iPhone to Verizon 6 running the latest iOS via mobile access point.  The VPN itself requires a certificate and a name of user and password (from the AD authentication).

  During the attempt, on Mac, we get the error: client VPN could not check the IP forwarding table changes. A VPN connection can be established.

  The connection can be established in other hotspots, Android on Verizon, IOS on AT & T, no problem.  IOS on Verizon?  Nope.  No luck with Verizon to support.

  The only thing that stands in the firewall log when the connection attempt fails: group user IP <123.45.123.234>transmitting large package 1456 (line 1399).

  Any ideas?

  Thank you!

  Please try to disable IPv.6 from the MAC interface

• SA520 - random don't reboot - no idea why!

  Hello

  I use a SA520 to a hospital in oder to manage the VPN and Internet access. They were some troubleshooting with VPN and it seems ok now for 1 month. But for 15 days, the router seems to restart randomly (2 or 3 times a day)... why? I don't know, I had no error (just a VPN)...

  The firmware is 2.1.71 (updated for 1 month): during the night, it seems preferable... The CPU is used at least 5%, memory is used around 50%.

  below the only mistake I have (after restart):

  Sat 1 Jan 01:05:18 2000 (GMT + 0100)	WARN	VPN			no defined phase2. Component: VIPSECURE
  Sat 1 Jan 01:05:19 2000 (GMT + 0100)	WARN	VPN			No phase2 found for 'P_Labo_xxxxx '. Component: VIPSECURE
  Sat 1 Jan 01:05:19 2000 (GMT + 0100)	WARN	VPN			no phase 1 found to "Labo_xxxxxxx". Component: VIPSECURE
  Mar 15 Jan 10:57:14 2013 (GMT + 0100)	WARN	FIREWALL			The journal above repeated 1 time *. Component: firewall
  Mar 15 Jan 11:32:20 2013 (GMT + 0100)	ERROR	VPN			No iph2 found: ESP xxxxxxxxx > xxxxxxxxx with spi = 1995742034 (0x76f49b52) Component: VIPSECURE
  Kill Jan 15 17:39:40 2013 (GMT + 0100)	WARN	FIREWALL			The journal above repeated 2 times *. Component: firewall

  How can I do to get the logs before reboot?

  Thank you

  Hi, yes a defect probably will help any. The release notes indicate the router needs to be reset on the 2.2.0.7 upgrade. If you call the support that they also will be asked to do.

  -Tom
  Please mark replied messages useful

• VPN connection error - pppd limited

  Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:

  15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized

  15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app

  15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]

  15/09/2016 10:16:01.730 [config info 603] loading saved profiles...

  15/09/2016 10:16:16.507 [connect info 603] user: "prueba".

  15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."

  15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.

  15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...

  15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.821 [General notice 603] retry...

  15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.

  15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.

  15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...

  15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.058 [General notice 603] retry...

  15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.061 [General error 603] disconnect command failed

  15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.

  15/09/2016 10:16:17.063 [config info 603] loading saved profiles...

  15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.

  

  I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.

  Help...

  You shouldn't be messing with the security features of the operating system.

  Problems may have to do with the network, or client software that you use.

  I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.

  FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.

  I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.

• Raccoon VPN error: Identity Protection mode is not acceptable

  VPN seems to stop working after a while. The console then reports the error: racoon: Identity Protection mode is not acceptable. The solution is just to stop and restart the VPN using the OS X Server application.

  Using the latest released version 5.1.5 and OS X 10.11.5 server.

  This problem is of long standing and has not been cured by OS X software or server updates.

  Hoping someone can explain what is happening and how to fix it.

  "Back to My Mac" is incompatible with the VPN service. It should be disabled on the server and on an AirPort base station, if necessary.

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• Get 810 error message when you try to connect to the VPN using L2TP protocol

  Original title: L2TP will not let me connect.

  I am in Workstation 9 and in each virtual machine, I have an AD - DC (2K8R2Enterprise), CA and RRAS (2K8R2Enterprise) and my last vm is a win7 (they are all tests).  All are not updated, but the PPTP, IKEv2 work without problem.  The second server that has the CAs and RRAS is a member of the AD - DC server.  The Win7 is not on the domain and I have Win7 a client certificate.  I have ensured that the CA root of trust is in the user store and computer Trusted Root CA.  I have also ensured that the Win7 client certificate is in the user store and personal computer.  I get a 810 error message when I try to connect to the VPN using the L2TP protocol.  I have exhaustively studied this problem and I can't find a solution to this problem.  I also raise the functional level of the domain to 2K8R2.

  I think this should be a simple and easy solution, but where can I find the answer?
  Please help me.
  Thank you for your time.
  Allan.

  Hi Allan,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en/category/w7itpro

  If you need any other assistance, let know us and we would be happy to help you.

• While trying to connect to the VPN Windows, I get an error 868. What does that mean?

  original title: connection to the VPN

  While trying to connect to the VPN Windows, I get an error 868. What it means. The address of the server I used was 68.28.195.137. Help, please.

  Vijay Kapnadak

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 networking forum. You can follow the link below to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro