error 8007002

Similar Questions

• I can't update KB970710 and get error 8007002.

  I can't update KB970710 and get error 8007002.  This is an important update.  I went to the Microsoft web page, and it explains how to download the update in safe mode.  In safe mode I can't have in the center of update by using the Start button and pressing the update of windows.  The funny thing about all this is that the update does not load because of my virus program which is essential to MICROSOFT security.  Please help me.  I fear that my computer may be at risk because I was not able to download from 17/06/11, since it was released.

  Hi Jan31158,

  Follow these steps:

  Method 1:

  Follow the steps in the following article troubleshooting to solve the problem:

  Windows Update Error 80070002

  Method 2:

  Download and save the Setup on your desktop package and try to install the same.

  Download the update from the link below:

  Update security for Windows Vista (KB970710)

• Error frustration 8007002 sevice Pack 2

  Have tried to install Service Pack 2 for Vista for months via Windows updates and keep getting error 8007002, tried the recommendations of fix it again according to the troubleshooting guidelines, but it won't download after that... HELPPPPPP!

  Hello

  Please find the bandages of assistance on the above:

  http://support.Microsoft.com/kb/947366#resolution2

  http://support.Microsoft.com/?kbid=910336

  For the Manual:

  (1) go to the Start Menu.
  2) click on computer.
  (3) open the drive where windows is installed (usually drive C).
  (4) open the Windows folder.
  (5) go a little, and then find the folder C:\Windows\SoftwareDistribution (exactly like this).
  (6) open the download folder.
  (7) open the installation folder.
  (8) could be only one file there. Right-click on it and select "Run as Administrator".
  (9) after entering an administrator password, launch the installation, using the default values by clicking Yes to the license.
  (10) after the installation is completed (shouldn't take more than a few minutes), restart your computer (as a caution, although not necessary).
  (11) when the computer is restarted again, run Windows Update again. It should work normally. All fixed!

• Error when installing Windows 10

  Hello

  When installing windows 10, it's show error 8007002.

  I deleted temporary files, but its still the same error showing.

  Help, please

  80240020 8007002C 80246007

  1. navigate until "C:\Windows\SoftwareDistribution\Download" and delete the contents of the folder. 2. press on the Windows key + X > click (Admin) command prompt and then type "wuauclt.exe /updatenow. Press enter 3. open Control Panel > Windows Update and Windows 10 should begin to download...

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times and try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Do a clean boot, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both and try the installation again.
  • If you update via Windows Update, when download reaches 100%, disconnect the Internet LAN (Ethernet) or wireless, and proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

    How to: upgrade previous versions of Windows using the file ISO for Windows 10

    How to download official Windows 10 ISO files

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

• Windows 7 - error Code: 0 X (failed installation update) 8007002

  Running Windows 7 Ultimate 64 bit. Never had a problem installing Microsoft programs before. Tried to install Microsoft "Windows Xp Mode". I get error information "update installation failed' 0 x 80070002 when trying to install the validation tool. Otherwise all my Windows updates were installed without problem.

  Attended a local help for 80070002 error. Clean up the directory "temp". Same error, did not help.

  Thanks for your help.

  Hi Robxx,

  InPlace upgrade performs a repair facility that will repair the current installation of Windows to the version of the installation DVD.

  Note Run a repair installation will not damage files and applications that are currently installed on your computer.

  To perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2, follow these steps:

  1. Close all running applications.
  2. Insert the Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2 DVD into the DVD drive of the computer.
  3. In the settings window, click install now.

     Note If Windows does not automatically detect the DVD, follow these steps:

     1. Click Start
        Collapse this includes this image

        

        , and then type Drive : \setup.exe in the box to start the search .

        Note The Drive placeholder is the drive letter of the computer's DVD.

     2. In the list of programs , click Setup.exe.
     3. In the settings window, click install now.
  4. Click connect to get the latest updates for installation (recommended).
  5. Type the CD key if you are prompted to do so.
  6. In the "Windows Installer" page select the operating system you wantto update orInplace.
  7. Click Yes to accept the Microsoft software license agreement.
  8. On the which type of installation you want? of the screen, clickupgrade.
  9. When the installation is complete, restart your computer and try again to install updates.

  If your PC is OEM that his pain, because you can only use recovery CD to restore the original state, which means that you must back up all data before restoring.

  Most often this error 0 X 8007002 is related to the corruption of the file system that system preparation tool or SFC/scannow is not able to fix so the only option is step mentioned above (upgrade inplace or what we call previous repair installation)

  I hope this helps!

  Best regards,

  Antony

• Cannot download 10 windows XP and IE 8 security updates. for all error messages are either: 0x800700D and 0 x 8007002.

  Cannot download 10 windows XP and IE 8 security updates from microsoft windows update site. for all error messages are 0x800700D or 0 x 8007002.  Please help thanks.

  Thank you.

  Hi Pauli,

  See following documents to troubleshoot Windows Update error 0 x 8007002 & 0x800700D (scroll down to section fix it myself ).

• an error (-5005: 0 x 8007002)

  OK, so all my other posts, I think that might be the problem. I went to uninstall Tom Clancys Rainbow six the other day, and today it is still in the Add/Remove files. When you click the Remove button to it, this is what came:
  an error (-5005: 0 x 8007002) occurred during the execution of the installation.
  Please make sure you have finished any previous Setup and closed other applications. If the error persists, contact your provider: Ubisoft
  (#ID_Company_URL #)

  This means can not find file
  Reinstall the software, and then try to uninstall.
  --
  ..
  --
  "defo98" wrote in message news: 8084bac4-e31f-4415-8c8b-b18068fdd1ba...
  > Okay so all my other posts, I think that might be the problem. I went
  > Tom Clancys Rainbow six to uninstall the other day and today it is still
  > in the Add/Remove files. When you click the Remove button so that it is
  > what came:
  He setup.
  > Please make sure you have finished any previous and other facility closed
  > applications. If the error persists, contact your provider:
  > Ubisoft
  > (#ID_Company_URL #)

• Get the error code 8007002 when trying to install KB 2378111

  Original title: WINDOWS UPDATE WANTS ME TO INSTALL KB2378111. BUT WHEN I TRY, 8007002 ERROR MESSAGE APPEARS.  WHY?

  I RECENTLY PERFORMED A SYSTEM RECOVERY.  IN DOING SO, WINDOWS UPDATE STARTED TO SEND ME DOWNLOADS TO INSTALL.  AMONG THE DOWNLOADS IS KB2378111.  IT WOULD DOWNLOAD, BUT INSTALLATION FAILED.  ALL OTHER DOWNLOADS INSTALLS BUT KB2378111.  WHY?  YES, SERVICE PACKS 1 AND 2 ARE INSTALLED.

  8007002 ERROR MESSAGE.

  Hello

   
  
  Were there any changes (hardware or software) to the computer before the show?
   
  
  Method 1: perform the steps in the article mentioned below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002
   
  
  Method 2: Manually download and install the update and see if the problem is resolved.
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=2317
  (For 32-bit Vista)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=22915

  (For Vista 64-bit)

  
  Hope this information helps.

• Error "the system cannot find the specified file. (0 x 8007002)"when you try to bacup on external hard drive.

  original title: the backup help.  I can't run a backup.  Windows Vista 64-bit.  Get the error "the system cannot find the specified file. (0 x 8007002) ideas?

  My last successful backup has been 12/12/2010!    I am backup on an external hard drive.  I installed the KB947821 hotfix successfully, but the backup still does not work.

  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/0e0af440-1da6-4fe4-8B44-872078ec4911

  I'll go through this link try others did for the resolution measures

• Installation of Service Pack 1 for Vista Edition basic family has no 0 error code 8007002 x

  I have recently reinstalled Windows Vista Home Basic on my Dell 32-bit. When you try to download Service Pack 1, it failed with the error code 0x800t002 what does this error mean? And how to fix it?

  in the event of error code is 0x 80070020 and not 0 x 8007002

  0 x 80070020 -2147024864 STIERR_SHARING_VIOLATION the process cannot access the file because it is being used by another process

  http://support.Microsoft.com/kb/883825>

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

  in the event of error code is 0x 80070002 and not 0 x 8007002

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366>

  UTC/GMT is 20:42 Sunday, December 18, 2011

• error 0 x 8007002 when you save to an external drive

  trying to save vista windows on an external hard drive.  It maintains fail with the error code 0 x 8007002.  I tried the updates, etc., is not yet back up. Any ideas?

  Error message when you try to restore from a backup complete a Windows Vista-based computer: "the system cannot find the specified file. (0 x 80070002) »
  http://support.Microsoft.com/kb/951002/en-us

  0x8100002F error code and or error code 0 x 80070002 when you back up files in Windows 7
  http://support.Microsoft.com/kb/979281/en-us Note: for senario #2 you must set Windows Explorer Tools/View tab:

  (1) show hidden files, folders or drives
  (2) remove the checkbox «Hide empty drives...» «, «Hide extentions...» "and"Hide protected operating system..." ».
  3) click on "Apply to folders", then click "OK" to exit.
  Normally the 'Contacts' and 'Research' folders are created during the installation process of Windows before setting the time zone option. The "AppData" folder is re-created when the Windows Vista to Windows 7 upgrade process.

  Also: Win7 Backup - error. (0 x 80070002) - cannot find the file specified.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/bff71aac-c78e-42bd-A959-116019c93478

  J W Stuart: http://www.pagestart.com

• I replaced my motherboard, now Vista will not boot. I can not install either (error code 0 x 8007002)

  I changed my motherboard and now my Windows Vista SP2 does not start.

  I have downloaded and burned a boot from Windows Vista DVD from microsoft.com and I tried to install it but I get a message "this installation has been cancelled. The dialog box shows

  «Windows cannot open the required file D:\Sources\Install.wim...» "Error code: 0 x 8007002.

  Help please?

  "arielca" wrote in message News: * e-mail address is removed from the privacy * .com...

  I changed my motherboard and now my Windows Vista SP2 does not start.

  I have downloaded and burned a boot from Windows Vista DVD from microsoft.com and I tried to install it but I get a message "this installation has been cancelled. The dialog box shows

  «Windows cannot open the required file D:\Sources\Install.wim...» "Error code: 0 x 8007002.

  Help please?

  If your computer has an OEM version (supplied with the computer) of Windows Vista, it is linked to the original motherboard and when you replaced the motherboard the license becomes invalid.  The only exception is if the original motherboard been replaced by or with the approval of the OEM (computer manufacturer) due to a failed motherboard and an exact match is not available.  It would then the OEM manufacturer to provide a license appropriate for the computer.

• error code: 0 x 8007002

  And then, when I ran Diagnostics from Windows update it returned with the error code: 0 x 8007002

  Is there an easy solution?  Or should I take the long way around with a clean install of windows?  I have already re-set my internet browser explore once updated.

  To see the list of Windows Update on your registry, please check the registry entry: HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate. Incorrectly editing the registry may severely damage your system. Before making changes to the registry, you must back up all the data that have been evaluated on the computer.

  For more assistance, we suggest you to post your concern on TechNet forum.

• Backup error message 0 x 8007002

  I get the above error message everytime I try a backup. I tried many things: restart Volume Shadow Copy, clean the system starts, and I checked the regedit for profile image paths. I think that this may be the cause of the problem. I couldn't find the ProfileList under Windows, but it's under Windows NT. The first three profiles were correct. The last four had no any ProfileImagePaths. I did not remove the such as described in the instructions. Can someone give me an idea of what I need to do? I also installed the system preparation tool and look for the missing updates. The only one who appeared was the upgrade of Internet Explorer 8.0 which I can't do right now because my school online does not support. I have not received an error regarding the installation of Windows updates.

  Thanks for any help you can give me.

  RLPolson

  When you try to run a backup you simply by clicking on save or leave the race scheduled backup? Instead of doing this, try to create a new task of backup from scratch. If this does not work, try the backup to another location. Write back and let me know your results. Thank you, Jeremy M - Support Engineer

• Cannot perform a backup, get the error: "the system cannot find the specified file (0 x 8007002). Can someone help me?

  Have not been able to run a backup from 04/10/2011. Back to Windows and HP Easy Backup attempted no results. Help!

  Hello

  What do you, what you see, where there are other error messages? Those
  almost always solves this problem so is as shown. It is easy to miss one of the
  images of profile or other parameters.

  Make sure that the backup drive/device is available and try to copy files to and from it
  to ensure access is correct.<-- is="" the="" other="" common="">

  =================================================================

  If necessary try an InPlace upgrade/repair facility that allows to keep the
  programs and data backups redundant but are always a good idea. Then try to use
  the previous methods according to the needs.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  I hope this helps.