error 80070490 fishing DVD instalacion

Similar Questions

• Error 80070490. Not able to install update KB978542 security.

  Original title"error 80070490.

  get error 80070490 after trying to install update KB978542 security. Hoping to get help with this soon, he began to do for me!

  Response copied from Steve Wechsler

  For beginners and intermediate users.

  (1) you receive an error code "0 x 80070490" when you use Windows Update or Microsoft Update Web sites to install updates http://support.microsoft.com/kb/958044>

  > This problem may occur if there is corruption in component maintenance (EC) manifest.

  (a) run sfc/scannow from an elevated command http://support.microsoft.com/kb/936212prompt >

  (b) download, save and then run the update of the system (or CheckSUR) tool http://support.microsoft.com/kb/947821>

  (c) > to resolve this problem, you must perform a repair of Windows Vista or Windows Server 2008 installation.

  > Performing a repair installation will restore you the current installation of Windows for the version of the

  > Installation DVD. It also requires the installation of all the updates that are not on the

  > Installation DVD.

  For advanced users or the intrepid.

  (2) how to overcome error 0 x 80070490 installing updates in Windows Vista/Server 2008 http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-windows-vista-server-2008.aspx>

  3) manually update. Security updates are issued the second Tuesday of the month.

  Of security no Windows updates are issued the fourth Tuesday of the month.

  Description of changes to Software Update Services and Windows Server Update Services content for 2010 http://support.microsoft.com/kb/894199>

  Be wary of the installation of NON-essential software * which will then be updated when a flaw is discovered in them.

  Ex: Windows Desktop Search; Silverlight; etc.

• Windows Update error 80070490 - persists

  I have Windows Vista Ultimate and I get error 80070490 when you try to make updates.

  I tried to reinstall the program with the DVD to repair damaged files, but my DVD has SP1 while the computer already has SP2, so it will not upgrade the DVD. The only option is to 'clean up' the installation or an upgrade higher.

  Any suggestions?

  I also have the DVD to upgrade to Windows 7 Ultimate. It doesn't matter if I'm updating 2 updates to security in Vista before moving on to Windows 7? The new installation of Windows 7 take care of damaged in Vista files?

  Thank you

  Julianzote

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011 - Update Services

• Re-install vista error 80070490

  Original title: reinstall vista.

  I need to re - install Windows Vista family premium I produced the key installation disc, I update 80070490 error.

  Hello

  If you have tried the methods to fix this error to Microsoft, you must do a repair upgrade installation:

  http://Windows.Microsoft.com/en-us/Windows/Windows-Update-error-80070490#1TC=Windows-Vista

  http://support.Microsoft.com/kb/958044/en-us

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  _____________________________________________

  If you want to make a reinstallatrion complete, here are the different methods to do this:

  This can help you (download files and make your own DVDs):

  http://www.heidoc.NET/Joomla/technology-science/Microsoft/57-Windows-Vista-direct-download-links

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• Failed with unknown error 80070490 Windows Update

  Update Windows guard fails with unknown error 80070490 when trying to install to install the important updates made automatically by Windows Update. Having this problem since February 10

  http://support.Microsoft.com/kb/958044

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the system update tool for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

     http://support.Microsoft.com/kb/947821/

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you must perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  See you soon.

  Mick Murphy - Microsoft partner

• Does anyone has found a fix for the update of VISTA KB275842 error 80070490?

  Anyone found a fix for VISTA KB275842 error 80070490, or none of the solutions or help?

  80070490 ERROR_NOT_FOUND

  Corrupted system file

  You will need to perform an upgrade on the spot or reinstalling the operating system.

  Use the System File Checker tool to troubleshoot missing or corrupted on Windows Vista or Windows 7 system files

  http://support.Microsoft.com/kb/929833>

  `~`

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt.

  The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update 80070490 error.

  To learn more about this tool, go to which is the analysis of system update tool? on the Windows website. http://support.Microsoft.com/kb/947821>

  If the system update readiness tool solves the problem, you will need repair Windows.

  Repair Windows will not damage your personal files or the programs that are installed on your computer.

  Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD.

  To repair Windows, follow these steps:

  1. Close all programs and restart your computer.

  2. Insert the Windows DVD into the drive of the computer. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

     1. Click Start and type Drive: \setup.exe in the search box, where drive is the letter of the DVD drive of your computer (for example, D:\setup.exe).

     2. List programs, click Setup.exe.

  3. Click on install now.

  4. Click go online to get the latest updates for installation (recommended).

  5. If you are prompted to do this, type the Windows product key.

  6. What type of installation you want? window, click upgrade.

  7. Once the installation is complete, restart your computer, and then run Windows Update.

  `~`

  I hope that's enough to put you on the right path for nºw.

  Let us know how it works ºut.

  Good luck

  The current time and the date now in France is

  22:04

  Tuesday, March 26, 2013
  Central European time (CET) + 0100 UTC

  UTC/GMT is 21:04 Tuesday, March 26, 2013

  Current weather conditions in Paris

  Cloudy4 ° C / 39 ° F

• Windows update error 80070490

  Windows error 80070490 update - have tried restores back few months but still not fixed. Trying to solve what thopught he had resolved, but didn't. I don't think I can be a windows DVD or the disc so how to solve this problem? Thank you

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  or

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

• Updates install error 80070490

  original title: error 80070490

  Running windows vista Home premium and get the error 80070490 on updates. Follow the instructions to reinstall the DVD and follow the installation program. Product key information and the screen will not go to OTHER. Tried several times - numbers and letters are correct. What to do next?

  Hi DeborahWilliams_667,

  Is level of service pack on CD/DVD the service Pack installed on the computer?

  If the disk on the computer does not match the service pack, we may have to uninstall the service pack by following the steps in the following article.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

  After uninstalling the service pack try to perform the steps as shown below.

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  If you are still a matter of experience with the product or activation key, make the phone activation by following these steps.

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929

  Note: See the Microsoft Windows Vista from the above link.

  I hope this helps.

• I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

  error 8007090

  I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem

  Hello

  Are you sure this is the error Code?

  And not this one?

  It is the opinion of Microsoft about the error code 80070490.

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  http://support.Microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

     For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821

     (http://support.microsoft.com/kb/947821/)

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

  "This has occurred as soon as I updated from Windows XP"

  You have the upgrade DVD?

  Here is a tutorial on how to do it:

  "How to perform a repair for Vista Installation"

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  See you soon.

• Windows update error 80070490 - other corrections code do not work.

  I have 9 updates, that I need to install it and I get the error code 80070490.

  I did the following to try to address everything with no luck...
  (1) tried a system restore. Unfortunately this update has been tried and failed several times during the last few days, and each time it is automatically a restore point. So now I have no more old that won to restore restore points.
  2.) have tried updating system as indicated here preparation tool:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  Rebooted and still have the problem.
  2.) attempt to perform a repair with my Vista Ultimate DVD installation as described here:
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  The problem is that I can't choose 'upgrade '. It is grayed out. The reason for this is that I can't upgrade to a version older than what I'm running now. My DVD is SP1 and I have since upgraded to SP2. I keep seeing this recommendation and it will not work for me.
  (3.) I deleted the "Software Distribution" folder and reinstalled the WindowsUpdateAgent.
  4.), I tried to use the Mr FixIt. It does not find that there is a problem with the windows update and then it tries to fix it. It runs corrections and says that it has attached to them. But when I close and re - run, problems are found and 'fixed' again. I have been through multiple cycles of Mr FixIt, restart, update, error, fixit, etc.. I also tried the fixit several times back to back running. Whenever he finds the problem, says it is fixed, but then when re-ran he finds the problem, said again and again this is corrected.
  This all started after uninstalling several pieces of software by using the control panel. I emptied several unused programs and uninstalled AVG Antivirus. Not sure if this is related or not, since that was a few days after uninstalling before I saw for the first time this error.
  I'm still having the problem.
  If you could point me kindly to specific files that need to be extracted for this error I would really appreciate it.

  I managed to solve this problem on my own. It turned out to be something with the above Japanese language pack. I uninstalled it and everything updated correctly. I thought I'd pass just in case someone else has the same problem.

• Windows Update error 80070490 installation KB2679255

  Original title: we have all seen big problem istelling updates

  SEMM to me like windows no longer like and want us to buy new computers I read how manny people are havin the same problem and they don't suprerb thereon .i have a month with the error code 0 x 80040154 error 80070490 and the Dungeon send me updated same time and many KB2679255 can I get the assistance of a person really apreciate thanks guys...

  From the other thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/cant-down-load-any-updates/b2a0ce2b-6b00-4214-95D5-6499a92d5b2e

  Cannot down load the updates

  Can not load down the updates, computer message read, Windows update data locations have changed... Please can anyone help with this issue...

  Hello

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  If the steps do not help then I suggest you to go through the steps mentioned below and check.

  Method 2:

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490

  Important: make sure to save all your date before performing the repair facility.

  Note: After the upgrade on site, your personal data and installed programs will not be deleted, but you may need to run Windows Update to install all the updates that are available for your system to update these files system to the current version.

  If your installation DVD disc is prior to Sp1, and you have the SP1 is installed on your computer, you will need to uninstall SP1 to finish the upgrade on the spot and then reinstall the necessary windows updates. This applies if you have SP2 also.

• Cannot install updates for WIndows - error 80070490 and installation disc?

  original title: error 80070490 and installation disc?

  Dell, Vista, x 64 laptop.

  I can not install updates, including Service Pack 2 and IE 8. I managed to fix the other error messages, but this one is a winner.

  I can't follow the steps here because I don't have an installation DVD. The laptop doesn't have a CD/DVD-ROM internal drive and did not come with a disc because everything was preinstalled. Even if I had a disc, my computer does not recognize the CD/DVD-ROM external drive when it is plugged in (a problem at a time!), so it would always help. "The System Update tool does not work on this machine, probably because of that pesky little" compatible operating systems: Windows Vista Service Pack 2 "requirement. I so need SP2 to download the tool which will allow my computer to install SP2? Nice little catch-22 there. I agree with the irony. I disagree with not being able to install updates at all, ever.

  Is it possible to re - install without a disk? Can I solve this problem at all or I'll have to take the laptop to Best Buy and ask them to do some voodoo Geek Squad to it?

  Hello

  Check if your computer has a recovery partition.
  If the computer has a recovery partition, use the recovery partition to restore the computer to factory settings.
  Note:   All programs and data will be lost.  You can make a backup of all important data and reinstall programs.

  You can also contact the manufacturer of your computer, and asking for a disc.

  Windows Update error 80070490
  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Update-error-80070490
  Please note: you must have a disk for Installation of Windows Vista with Service Pack 1 integrated in to perform an upgrade to your computer, like your computer with Service Pack 1.

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

  Note: Run a repair installation will not damage files and applications that are currently installed on your computer. However, I suggest you to save all the important date of the computer before you perform the upgrade on the spot.

  Thank you

• Windows update fails with error 80070490

  Hello

  My work of automatic update of window well before that I refused to renew Norton internet j.4. I remove norton animals.  I found windows update could not be updated and out of this error code: "WindowsUpdate_80070490" "WindowsUpdate_dt000".

  I follow the instructions to repair, but wouldn't. I try original window vista install disc, but the update is disabled. How can I return to update windows again?

  I have another question: How can I remove the firewall of the company others out and set windows as default firewall firewall?

  Thanks for any help

  Jack

  Hi Jack,

  ·         Did you do changes on the computer before the show?

  ·         You install updates?

  ·         Have what troubleshooting measures you tried?

  ·         What do you mean by "I try original window vista install disc, but the update is disabled '?

  ·         The upgrade option is disabled?

  ·         What Service pack is installed on the computer?

  ·         Is the service pack included with the DVD?

  Cases of incompatibility, upgrading will be disabled, check if you are using the good DVD to upgrade that is 32-bit to 32-bit or 64-bit to 64-bit.

  Also check if you choose the same version of Windows that is installed on the computer. Check the space on the hard disk.

  Note: Backup the data before a repair installation of Windows.

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Windows Update error 80070490

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

  Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

• Is no longer, I can download and install the updates for Vista SP2. I get error 80070490

  Original title: Windows of Vista SP2 update fails.  Vista Upgrade option grayed out

  Is no longer, I can download and install the updates for Vista SP2.  I get error 80070490, who reports that Vista Service Pack 1 is no longer up-to-date.  I downloaded and installed the "System Update Readiness Tool" without change in error.  Repair Vista with DVD does not give me the upgrade option.  My SP-2 is corrupt?  Vista Service Pack 2 also went out of support?

  Kind regards

  Ed S.

  Hello

  Method 1:

  Follow the steps in troubleshooting section and check if that helps.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  http://support.Microsoft.com/kb/958044

  Method 2:

  You can also read this article and check if it helps.

  How to uninstall Windows Vista service packs as a troubleshooting step

  http://support.Microsoft.com/kb/948537

• HP OfficeJet Pro 8610: Windows Update error 80070490

  I received a Windows Update error 80070490 compared to the HP printer.  How to solve this?  What are the steps to take.

  Welcome to the HP Forums @ace8,

  I came across your post about Windows Update error "80070490" you received on your Windows Vista system and I wanted to respond to try to help.

  Here are two documents that I found on the Microsoft website on errors:

  1. Windows Update, error 0 x 80070490
  2. Windows Update error 80070490

  If there are problems with the printer features, let me know a description of the printer problems and I will do my best to help.

  Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
  
  All the best,