error 80070490 in Windows Vista

Similar Questions

• error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  error code (0x000000d) windows vista when I try to print, also cannot open windows updates or control panel

  Hi lisafuller,

  1 when was the last time it was working fine?

  2. did you of recent changes on the computer?

  3. What is the serial number and model of the printer?

  4. what happens when you try to access that Windows update and Control Panel?

  5. do you have security software installed on the computer?

   

  Method 1

  See the below Microsoft article and try the steps mentioned, check if it helps.

  Error message when you try to install a network printer on a Windows Vista-based computer: "Windows cannot connect to the printer operation cannot complete (error 0x0000000d).

  http://support.Microsoft.com/kb/947236

  Method 2

  If the previous step fails, then check out the link below and run them the troubleshooter, check if it helps.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Due to Windows update run the Windows Update troubleshooting, check if it helps.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Also check if you can access control panel from safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

• I try to install from a CD of lightroom 6 on my win7 64 bit pc, but gets an error saying that windows vista is not supported?

  I try to install from a CD of lightroom 6 on my win7 64 bit pc, but gets an error saying that windows vista is not supported?

  Thanks a lot to point me in the right direction. I live in the Denmark and the Danish version of Win7 64, I was able to install from a CD LR6 after choosing not win 7 (was not available), but (if I remember) "no specific compatibility. After installation I clicked on LR6 and changed the favorite to Win7 program compatibility.

  Best regards

  Aage

• I get the Windows Update error 80070490 blues! -Vista

  Original title: I get the Windows Update error 80070490 blues!

  I am running: Windows Vista Ultimate 32-bit & Internet Explorer 7 (impossible to upgrade to IE8). I've beaten my head against the wall for well over a month now because I can't seem to install the following updates without entering a code 80070490 error:

  KB975467

  KB959426

  KB968389

  KB970430

  KB971737

  I did the following in all possible combinations in an attempt to install these updates:

  Disabled user account control

  turned off the Windows Firewall

  disabled my antivirus (Avira Anti - Vir Personal)

  To put it succinctly, I can't think of anything to do after following all of the ideas, tips & suggestions help Section!

  Help, please! All I can think to do now is to get some black candles and sacrifice a rubber chicken!

  Wouldn't you...

  0 X 80070490 - ERROR_NOT_FOUND
  Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.

  The error you receive occurs if there is corruption in the manifest of component maintenance base.

  Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
  http://support.Microsoft.com/kb/931712
  "Explains the SFC / Scannow.

  See also: how to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  A repair install is the usual solution of SFC/scannow does not work.
  However, a repair (AKA In-Place Upgrade) installation will be not solve the problem if it is due to a hijackware infection.

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  NB: If you have installed SP1 or SP2 for Vista

  Uninstall the Service Pack/s: How to uninstall Windows Vista service packs as a troubleshooting step
  http://support.Microsoft.com/kb/948537

  See also:

  How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
  http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspx

  Step 7 (method for Windows Vista), the * UPGRADE option is not available because Service Pack/s are installed and that your operating system is newer than the system you are trying to reinstall, so service pack/s must be removed in this case.

  TaurArian [MVP] 2005-2011 - Update Services

• Windows Vista Ultimate 64-bit SP2 becomes error 80070490 in windows update

  I have Windows Vista Ultimate 64-bit SP2.

  Get the error 80070490 Windows update installs.

  The following recommended by what could find did not work:

  I tried Microsoft Readiness tool several times without success.

  I tried to use my drive Vista system with the help of the option UPGRADE as many times and always without success. The upgrade option is still grayed out.

  I did a new INSTALL 2 different times.  I then run the update of Windows, over and over again at every reboot of levels. I always come back to the same level and get the error 80070490 on following 9 updates:

  Update security for Windows Vista for x 64-based systems (KB2564958)

  Update for Windows Vista for x 64-based systems (KB970430)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2604094)

  Update security for Windows Vista for x 64-based systems (KB2378111)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2686833)

  Update for Windows Vista for x 64-based systems (KB2345886)

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 for x 64 (KB2656374)

  Update security for Windows Vista for x 6

  How to cross this error 80070490

  Hello

  Thanks for posting in the Microsoft Community.

  1. you did make an image backup?

  2. what type of installation are you running?

  Please see the link.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070490

• Windows Update error code 8E5E03FB - Windows Vista

  Windows Update does not install KB2736233, KB2744842, and returns the message Windows Update encountered an unknown error with code 8E5E03FB.  I tried Microsoft FixIt, but it has not solved the problem.

  Have you checked the solutions/suggestions in the related discussions?

  Related topics

  • Windows Update fails to install with error code 8e5e03fb
  • Help with error code 8E5E03FB during the installation of update for windows 7 64...
  • Windows vista message 8E5E03FB update
  • I can't update Windows Code 8E5E03FB and p 80070490
  • Update Vista error 8E5E03FB & 8E5E03FA

• Photosmart C4400 Fatal Error download drive, Windows Vista

  Operating system: Windows Vista 32-bit

  Printer: Photosmart C4400 (I have had no other printer software on my computer)

  Problem: I can not download the driver (from the included CD) on my computer.

  Step 3/4, 94%, I get a fatal error Message:

  MSI. Scan

  Microsoft.vego.STL, processorArchitecture = "x 86", publicKeyToken = "1fc8b3b9alel8e3b" version = "8.0sc727.91", type = "win32".

  Error situation coade 20218093

  What I tried: disable the firewall, by downloading the reader from HP site, try the message error MSI listed on the HP site. All to nothing does not.

  What should I do to correctly download the driver? BTW: The printer works when I use a memory card.

  Thanks for all the solutions!

  try to download the latest version of msxml for windows, and then try to reinstall

• Error 80070663 with Windows Vista update

  I'm doing the update of windows on my Windows Vista computer and I get the same error code 80070663

  * Title *.
  I'm doing the update of windows on my Windows Vista computer and I get the same error cod 80070663

  Heather,
  This is an article dealing with questions with this error code: KB913754

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error running in Windows Vista

  I got a game installed on my Dell Inspiron 1525 and then all of a sudden it no longer works. I installed Odyssey Puzzle for a while now, but the other day I went to play and I get a runtime error of:

  Runtime error!

  Program:... f Odyssey\CradleofRome\CradleofRome.exe Month\Puzzle

  This application has requested the execution to terminate in an unusual way. For more information, contact the application support team.

  Hi jplo1979,

  Welcome to Microsoft Answers Forums.

  A runtime error is a software or hardware problem that prevents a program to function properly. Runtime errors could cause you to lose information in the file that you are using, causing errors in the file (corrupt the file) so that you cannot work with it, or prevent you from using a feature.

  Runtime errors can occur if you are running two software programs that aren't compatible, if your computer has memory problems, or if the computer has been infected by malware.

  To check the compatibility of a program, please see the Compatibility Center Windows Vista HERE. Your game software is not listed in the Windows Vista Compatibility Center, see this link HERE for frequently asked Questions and measures to address if the product you are looking for does not appear in the Windows 7 Compatibility Center.

  After following the steps above, if a runtime error persists, try the steps in troubleshooting mentioned in the article, what is a runtime error?

  Hope this information helps you.

  Kind regards

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error 80070422 with Windows Vista

  I had a problem with windows update for the better part of a year now, and attempts to solve currently have not succeeded, so I hope that you guys might be able to help.

  Windows Update refuses to check updates and refuses to download updates recommended that getting through the cracks (updates Windows Defender since earlier in 2015). Whenever it comes up with the same error 80070422.

  I always feel light defender of windows that it seems that the default option is. I regularly have antivirus and antispyware scans and they came to own.

  I tried to update manually and I tried Microsoft fix it but the problem persists. I also added http: & https://*.microsoft.com to my reliable internet sites such as suggested by another user. My laptop does not recognize the file from the Windows Update troubleshooting tool, so I've not yet been able to try this. What kind of file (that I'm likely to have already) should I open it with?

  If anyone has any suggestions, they would be welcome. Thank you!

  Hello

  I suggest you follow the steps in the following link:

  Windows Update, error 80070422, 80244019, or 8DDD0018

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070422-80244019-or-8DDD0018

  Important: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  See also: https://support.microsoft.com/en-us/kb/958043

  It will be useful.

• Error in loop Window Vista recovery

  I have a Dell PC OptiPlex 960 with Windows Vista Ultima. He has been given to us and we are seniors. They do not give us the password. We have so bee you try to reset the password for administrators, but we managed. We have no disc reset, and because of our low income, fixed income, we are unable to afford it.  After reboot, the system keeps coming up "Windows error recovery", we also want to upgrade the system to Windows Vista Ultimate Edition of Windows 10. Can someone help us?

  With any pc, the pc password can be removed by turning the computer off, remove the battery Mo,

  wait 10 minutes or so, replace the battery (usually a good time to replace the battery with one)

  a new)... Once the pc starts, enter in the BIOS (F2) faucet key.in BIOS, reset the date and time, the value

  for any additional card, output tab, set the boot priority, save & exit BIOS... What is a desktop computer

  Other PC work the same way, read the owners mauall if it is different...

  In addition, vista OS installed by default, usually will have the windows hardware 10 does, even

  Windows 8 and 8.1 don't work, 7 speaks of the best upgrade, run the utilities before compatibility...

  Get here.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

• How to fix the error message 'bad image logoui.exe error' starting in windows vista?

  I have windows vista installed on my hp laptop. I used it for at least a year until a few months ago, I started to meet this error message at startup:
  "LogonUIexe-Bad Image C:\Windows\system32\HID.dll is not designed to run on Windows or it contains an error. Try to install the program with the help of original installation media or contact your software support provider or system administrator."
  Is anyone having this problem. Please provide a cure.

  Hello sheritaG,

  Run The System File Checker utility:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search .
  2. Right-click cmd in the programs list and then click run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click continue
  3. To order invites, the following line and press ENTER: sfc/scannow (Yes there is a space after sfc)

  This analysis may take some time to complete. When the analysis is complete, test to see if the problem you are experiencing is resolved. Hope this helps you. Let us know anyway. Make it a great day!

  "In the end the love you take is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• Cannot back up files on the error code get Windows Vista 0 x 80070002.

  Hello MS Personal Tech.

  For several months now, I couldn't save anything on my Vista 32 - bit OS.
  I constantly get an error message: 0 x 80070002
  whenever I try to backup Windows.
  Obviously an important registry key is missing ("system
  Cannot find the specified file. »)
  Here's the registry key, I need: HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsBackup 
  For some reason, this key, which should be there and once that should have been there.

  is no longer.

  I used Malwarebytes, sfc/scannow, and then dskchk. Any report that everything is fine with my PC and the operating system!
  Original title: How can I create a missing key in my registry to save my files?

  HOW CAN I INSERT THE KEY ABOVE IN MY REGISTRY SO THAT I CAN PERFORM A BACKUP?

  Thank you for your attention to this point,

  marlem388

  Dear Fahimulla K,.

  I thank you very much for your very comprehensive answer and links provided.
  I followed through and processed all the steps you offered by the
  any MS links but after several hours of searching different remedies it has proposed, in the gaps.
  All my Image profile within the registry paths are complete; nothing is missing.
  I looked on support.microsoft.com/kb/979281 for suggestions and tried
  to include all the or reflected one of the examples could be the culprit:
  I 'm trying to back up my files to an external drive (Western Digital);
  but this is really nothing new.
  A couple of years, I could
  backup on external Lacie drive - but several months back Windows Vista Home Premium starts to give me this 0 x 80070002 error message (the system cannot find the specified file).
  From the outset, Lacie has been plugged into a USB port without any problem.
  I still don't understand why I do not have this specific file -HKLM\Software\Microsoft\Windows\CurrentVersion\WindowsBackup.
  A site of MS actually admitted that Vista does not contain this special value!
  I even bought "Free" Eusing registry because CNET gives a fine criticism.
  I downloaded this tool but again, after what he done his tasks, I still could not back up my Vista rrecords.
  So now I'll have to just use Easus ToDo backup, which I came
  times before. For some reason, it does not seem difficult to
  do what I expect to win. Vista to do.
  But even once, thank you for your efforts, Mr. Fahimulla K, on behalf of my deranged OS.
  Respectfully,.
  marlem388
   

• Error when starting Windows Vista and recovery system, 0xc00000f

  When I restarted my laptop, Windows Error Recovery appeared.

  None of these options (for example, Safe Mode) worked to solve the problem.

  The next page (Windows Boot Manager) appeared subsequently.

  Message from windows:

  Windows could not start. A recent hardware or software change might be the cause.

  File: \Windows|system32\config\system

  Status: 0xc00000f

  Info: Windows could not load because the system registry file is missing or corrupt.

  I tried to recover my windows using Recovery DVD of ASUS N2034 V1.0 15G3560310C0, but facing the error in the middle of the recovery process. I chose Windows recovery on partition 1 of the HD, because I don't want to lose my data in another partition. Message from Windows:

  Cannot open the WIM file

  Big red error message

  Hello

  1. who is the manufacturer of your computer?

  2 were there any hardware or software changes made on the computer before this problem?

  Try to start the computer in recovery options and then make a form of system restore it and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  Need to do a fresh install, it would be useful to know what was last removed or installed before this started.

  It will be useful.

• Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully. 8007371 C error code. Windows Vista Edition Home Premium Service Pack 2

  Update cumulative security for Internet Explorer 8 for Windows Vista for x 64-based systems (KB2618444) is NOT updated successfully.

  Other updates DO not seem to be successful.

  Error code is 8007371 C.

  How can I get this update successfully.

  Windows Vista Home Premium Service Pack 2, 64-bit system.

  Thank you

  Hello

  You can view these methods:

  Method 1: Temporarily disable the security software

  I suggest you to disable temporarily any them program of security on your computer and check if it solves the problem.
  After reviewing the question you must reactivate the security on your computer program.

  Note: Run the computer without antivirus software or firewall is a potential threat to the computer; Be sure to activate security software after completing the troubleshooting steps and after identifying the problem.

  Method 2: Reset the Windows Update components

  Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update.  Just click on the link below and follow the instructions.
  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756/

  Method 3: Clean boot

  I suggest to clean boot and try to install the update.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Once you make these methods try to install the update and check if it works.

  See the following links:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/20fa3032-Cdc6-4FF5-aea4-fd31a65e883d/

  It will be useful.