Error 80070490 vista sp2 installation. SFC said CBS mum missing kb905866 - y at - it complete a simpler than a repair solution?

Similar Questions

• Vista SP2 installation returns error 0 x 80070005

  Vista SP2 installation OR
  Install IE8 OR
  Do the Windows updates
  Returns the error 80070005 'access denied '.
  If running accesschk gets accesschk.txt results of
  HKLM\software\Microsoft\Windows\CurrentVersion\Component Servicing\Retry Agent of base
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000
  HKLM\software\Microsoft\Windows\CurrentVersion\Component base Servicing\Sqm\VistaSP1-KB936330~31bf3856ad364e35~x86~~6.0.0.18000\InstallCounter

  Please help... no update in a long time have worked... Thank you... Darryl

  See the RESPONSE message in this thread: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/29d7f9d1-56cd-42f3-bd44-7de8448ef70e

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista SP2 Installation fails (error 800706BE Code) via Windows Update

  I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

  (sigh) Can someone please help with this?  Thank you

  Naveen,

  Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

  Thank you once again!

• Vista sp2 installation failure, 80010108 error code

  According to the instruction of windows update that I tried to install vista sp2 KB948465 but result each time showed 'not installed, returning from changes', error code 80010108.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot start the workstation service, does not work error 1068 (Vista SP2)

  Hello
  It's about a year I can't start the workstation on my Windows Vista SP2 (HP Pavilion dv9000) service.
  It fails on: "Error 1068" "the dependency service or group could start.
  CBS.log sfc/scannow shows messages like:
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"Mrxsmb20.sys ".
  -Repair corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:24{12}]"ntkrnlpa.exe ".
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:20{10}]"Mrxsmb.sys ".
  -Repair corrupted file [ml:520 {260}, l:62 {31}] '------? \C:\Windows\System32\Drivers"\[l:24{12}]"mrxsmb10.sys ".
  A problem with the system audit reports:
  -on scname exitcode: 1068: LanmanWorkstation
  I have spent hours of troubleshooting and suspect I would need to replace the mrxsmb files but I'm not sure.
  I lived with the problem for months, but now he keeps me to install updates of Adobe software for Photoshop that requires the workstation service is running. I can't access an another XP workstation over the network.
  FYI: my mrxsmbxxx.sys files are all 23-02-2010.
  Windows updates are up-to-date, except one, the security update Windows Vista KB981852 which never succeeded to to install on my pc.
  Your suggestions are welcome.
  Thank you for your help.
  Eric

  I finally found a solution to this problem.
  I installed http://support.microsoft.com/kb/2272153/ .
  I hope it's useful to others.
  Eric

• Install Vista SP2 installs

  try to install windows vista sp2, he says need to install sp1, but when I look at system he said his race on service pack 1 how sp2 to install

  Hello

  This article explains how to troubleshoot problems when you install a service pack for Windows Vista or Windows Server 2008.

  http://support.Microsoft.com/kb/947366

  Use this forum link for all questions related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2 below.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  or repost in the Windows Update forum link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• No updates for all programs is including Vista sp2 installation

  I tried to install sp2 to Vista for nearly a year.  Recently, none of my other programs updates will install either.  I thought to go into repair mode, but have yet to see than recommended. Any ideas?

  Hello

  the error codes that you get when updating are required to help you with this

  and this is the wrong forum for this

  Try these steps and repost in the correct forums

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  Use this forum for all issues related to Windows Vista SP1, Windows Vista SP2 and Windows Server 2008 SP2.

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

• How to fix cryptographic stopped working error with Vista SP2

  I get this error message on all 10 minutes.  At the beginning it was just an annoyance, but I just realized that I can't do updates, update my IE version and now, somehow really weird, some sites such as Gmail site, will not open in Internet Explorer (but they will be in Safari).

  I tried to rename the Catroot2 directory, I tried to restart cryptographic several times just to get the error again and I scan SFC.  I had a file that could not be repaired called azroleui.dll.  I tried to download another copy of this dll, but even if logged in as an administrator, I can't move, delete to rename this file.
  Any suggestions?  I'm afraid to try a reload of Vista in case this problem prevents me to do as well.
  Help, please!

  Hello

  see if this information from microsoft helps you on this problem

  http://support.Microsoft.com/kb/822798

• Vista SP2 installation failed; stuck in the changes restart/back

  Hello, I ran the Vista SP2 update last night and left the computer to restart. This morning, he is stuck in a cycle and displays only the «...» "Restoration of the changes. Do not restart.

  It will restart only sometimes, but resumed the same screen.

  During part of the restart I tried to enter Safe Mode with no luck, the computer will restart after windows starts.
  I also tried loading with Boot CD, but the restoration of the system shows that the last time SP2 tried to install and will not return to it.
  Menu in the same startup repair shows also nothing wrong with WIndows startup.

  Please inform, I am unable to run any other diagnosis/Cleanup utility and don't know what to do!

  Hello Sam980,

  Welcome to the Microsoft Answers Forum!

  You can try to access the command prompt in the Windows Recovery console and see if can remove Service Pack 2 manually from your computer. Here are the steps to remove Service Pack 2:

  Open an elevated command prompt window.

  Run the following command, depending on the version of the Windows Vista service that you want to uninstall:

  For Windows Vista Service Pack 1:

  C:\temp\Windows6.0-kb936330-x86.exe x:C:\temp

  Note This command assumes that the file Windows6. 0 - KB936330.exe folder is in the C:\Temp folder

  For Windows Vista Service Pack 2:

  C:\temp\Windows6.0-KB948465-nnn.exe x:C:\temp

  In this command, NNN is x 86, x 64, or IA-64. The collapse of this tableauAgrandir this tableNote that this command assumes that the file Windows6. 0-KB948465 - X 86 .exe is located in the C:\Temp folder.

  We must create a sandbox environment before you can proceed to step 4. This allows you to manage safely an untrusted program. To create a sandbox, sandbox type md.

  To remove the Windows Vista service pack, type or copy and paste the following command, depending on the version of the Windows Vista service that you want to uninstall:

  For Windows Vista Service Pack 1

  start /w pkgmgr.exe /m:c:\temp\Windows6.0-KB936330-X86.cab /up s:sandbox

  For Windows Vista Service Pack 2

  start /w pkgmgr.exe /m:c:\temp\Windows6.0-KB948465-NNN.cab /up s:sandbox.

  In this command, NNN is x 86, x 64, or IA-64.

  Once Pkgmgr.exe completed, you are prompted to restart the computer to complete the uninstall.

  If these steps successfully uninstall the service pack of Windows Vista, and this resolves the issue, you are finished. If these steps do not uninstall the service pack of Windows Vista, or if these steps uninstall the service pack but do not resolve your issue, you need to restore the system to a previous state.

  To do this, go to method 3.

  Here is an article that will give you different methods on how to remove Service Pack 2:
  http://support.Microsoft.com/kb/948537

  If this does not work, then you can try to run CHKDSK on your computer.

  Recovery options or Vista disc Command Prompt type:

  chksdsk/f/r

  Try these steps and let us know if it works.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Suggestions for Vista SP2 installation?

  I have the window update the value "warn me before to download and install".  So, I have been notified that SP2 is available.  Need suggestions on the best estimate how to install without problems.  Must I download/install from boot.  Should I disable all applications security same Win Defender and Firewall of Win.
  Do I have to turn off my security application for downloading and installation or just download or just installing.  I read that the EULA must be accepted.  When the process is this convocation.  Can u post a sticky with Suggestions for a simple installation of SP2 and the installation process will look like.  Should I wait for more information on installation is available.  Thank you
  Respectfully
  bjm_

  FYI
  I installed SP2, the easy way.  I used the free Microsoft support available for SP2.  Microsoft took control shared my PC and downloaded/saved/ran/installed Stand alone packaging and analysis tool.   They holding me hands and accompanied me every step and I got SP2 installation without flaw.

  bjm_

• Windows Vista SP2 installation error loop (x 64) 0xc0190036 error number

  Hello, after installing SP2, I constantly make the same mistake, the bad thing is, insteath to back off, the SP2 update keep trying on and again and again to change the file that contains an error (file checks! error 0 x 00190036 mshtml.tlb!).
  now... I think that microsoft really screw them this time, because the installation program runs in any mode of windows, that is to say, cannot go to safe mode to attempt to recover from there, it's just again ONCE the attempt to install the sloppy SP2, restart the computer does nothing, as the update again will activate itself , so I always end up stuck in this part of the file with this error code mshtml.tlb (it continues to blink constantly as his try again and again access the file)

  Specs: Windows Vista SP1 Ultimate x 64
  GA - X 48 - DS4
  Q6600 @ 3 Ghz Kentsfield.
  4 x 2 GB (8 GB ddr2 800 Mhz)
  Sapphire Hd 3870
  2 x Western Digital Caviar (500 + 160 Gb) + Seagate 250 GB
  Sound Blaster Audigy 2 Zs

  Previous mistakes: I could never install IExplorer 8, it still reported a similar error, but with the ieunit file (don't remember the exact file currently extension)

  so the question is: will there be a fix for this problem? or do I just simply restore and try to recover manually in the hardway (Ie, run the Vista cd repair tool)
  im not wanting to use the repairtool, because he already ruined an once installation after a poor pass from windows update.

  * edit *.
  just to correct the incorrect error code, the correct error code reported is: 0xc0190036

  Sometimes the error is then replaced 0 x 0190002 then 0xc0190005 when stopping down.

  Note that I am on windows vista ultimate SP1 x 64 = programmer Noob =-

  Hi Tamalero,

  You got the error message indicates that mshtml.tlb is damaged and there is one possibility of other files system is corrupted as well. All what we need to do is to rename the DLLs corrupted, restart the computer and let start the computer normally to complete the installation. Follow these steps to rename the corrupted dll file.

  (1) Insert the windows vista dvd and boot from the dvd.

  (2) select repair your computer.

  3) click on command prompt

  Type the following commands and press ENTER after each line

  C:

  CD windows

  CD system32

  Mshtml.tlb.old mshtml.tlb Ren

  (4) output from command line

  (5) restart the computer and boot up normally

  If you GET the black screen with a similar error and one different (other than mshtml.tlb) file, make a note of the dll file, repeat steps 1 to 5 and type the name of the file in step 3.

  Restart the computer. It may take a while and you will be asked to connect to the desktop computer.

  Check in system properties if SP2 is installed.

  I hope this works. If you still have problem please do after back...

  Thank you.

  Hi error_counter here:
  do a "repair" is only starting problems, and once they are solved, the problem persists (mshtml.tlb error)
  I tried to remove this file, but then the error from 0xc01900036 at 0 x 000034
  so I'm stuck again, I don't know why the file mshtml.tlb is really important to "detect" If service pack updates it anyway.

  and like I said, even though vista windows SP1 supposedly has DONE a system restore point, no system restore points were detected by the dvd (one of the things that I hate about Vista than their restore points are a draw, and you can get by no unnecessary work anytime..)

  the thing which allow me to return back to SP1 followed the instructions of another post here, related to the error 0 x 000034 in this forum but for SP1.
  I went to the c:\windows\system32 directory and renaming of software files, security, SAM and default and replace them with copies of the REGBACK folder in system32\config
  It could back me to SP1, unfortunately a quirk stuck me then in an infinite "configuration updates 3 of 3" forever time it boots (it restarts itself after a few days). and had to delete pending.xml file

  That did the trick... for now, since everything appears to be damaged (I can use the program and the work very well, but no file windows update will not work).
  SFC detects inconsistencies but he did not get to 100%, it stops at 34% saying it had problems and "could not perform the requested operation."
  I also tried different microsoft tools. as the URSCheck and he only says: "this update does not apply to your machine.

  so I guess my whole installation is really really corrupt (and makes me really hate Vista more reason, until now almost all my facilities or computers other people that contains vista, are full of mistakes or quirkcs diferent that prevents normal use.)

  so Im trying to install Windows 7 in another partition and Im thinking in whiping it that soon everything is installed there.

  -= Noob programmer =-

• Vista Sp2 installation fails with the error ASN1

  When I run the installation of SP2 through Windows Update or the standalone version I get the following error «end asn1» unexpected data  Anyone have any ideas?

  I tried everything I can think and find on the web or on TechNet.  I even reinstalled the operating system and the error showed once again.

  Hello RowdyMrB,
  Thank you for visiting the Microsoft Answers forum.
  I suggest you to run a scan of the System File Checker to see if there is corruption in your system from the wrong key of RAM,

  To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Please post back with the last 50 lines of the output JOURNAL.

  Thank you

  Martin
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Vista sp2 installation error 0 x 80070020

  I have authentic professional vista 32-bit with service pack 1 installed.

  my pc has all the updates except sp2...

  I tried to install it with windows update, but it gave the error 0 x 80070020...

  I tried to install it with the standalone package but still the same error came... (ERROR_SHARING_VIOLATION or 0 x 80070020)

  I tried all possible solutions on the microsoft Web site include:

  1. disable firewall

  2 uninstall antivirus

  3. run the tool update system (its setup is complete)

  4. in the course of running in safe mode with networking

  5 perform the clean boot

  6. disable windows Defender

  the problem is still there...

  all my pc drivers are up to date...

  Help, please...

  Prateek_G,
  You can go through the steps listed in this article: http://support.microsoft.com/kb/883825

  Post back with the results.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DEP error Vista SP2 installation

  Hi I am using vist to operating system. When I'm trying to upgrade sp2, I got the error message that says blocking of execution of data. Help, please.

  creative Sam,
  In addition to the requested info PA Bear, try the points following and post back with the results.

  Run the System Update tool.
  Download the SP2 on your hard drive from the link in this article.
  Perform a clean boot and then try to install SP2.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• remote procedure call fail error fo vista SP2 printer installation

  I'm trying to reinstall my printer drivers and the HP software. I get the Windows Installer is not available. I have looked up lots of info on this and have tried many things but still seem to have a problem. This last time, I got the error message "the remote procedure call failed."  In services, the State of the PRC is started with Autostart upward, the RPC Locator is manual start. It is very annoying, because I can not use the HP printer. I disabled the AV and anti-spyware installation. Nothing seems to help

  Hello

  It sounds more like a problem with the installer for Windows rather than what it is with the printer itself.
  Have you tried to install other programs or equipment since the first see this message?
  If please see this thread and try again after the listed troubleshooting steps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/error-1601-Windows-Installer-is-not-accessible/08dce679-496d-43f4-A4B5-bb467800bb90