'ERROR 8024200d' this is the error code I get when I try to run Windows update

Similar Questions

• "The website has encountered a problem and cannot display the page you are trying to see." error when I try to run windows update

  I am re - install XP on an SSD. The installation went well, but when I try to run windows update, I get the following error message: "the site has encountered a problem and cannot display the page you are trying to view. I reformatted the drive and re-installed windows many links - no luck, I get the same error message. Old disk HARD charge with the SME XP install updates to drive very well. Help please!

  See if the article sheds some light for this problem: http://support.microsoft.com/kb/836941

• Error code 0 x 80040154 when you try to run Windows Update

  I get the error Code 0 x 80040154 when I try to run Windows Update. Need help!

  Hi Linda,.

  Are you sure that the Virus has been completely removed from your system? The behavior you describe looks like maybe it's still there, or there may be damage he did while he was in your system.

  You can try running this repair order: http://support.microsoft.com/kb/929833

  Also run this tool: http://support.microsoft.com/kb/947821

  and see if there are damaged/corrupted files.

• 8024A 000 error code when you try to run Windows Update on Vista 32-bit

  I get the above error when you try to run Windows Update on Vista 32 bit.

  I use an Asus laptop and have used the Asus recovery cd.
  I just replaced the old HD (500 gb) as it failed with a 750 GB HD.
  I tried the SP1 upgrade to SP2 and this causes a "catastrophic failure".
  Any help would be greatly appreciated.
  Thank you
  Sam

  Thanks for the support. I got the Asus machine this morning and they have corrected the problem in a few minutes by running a short script. In my view, that it is a common problem with Asus and Western Digital HD. Anyway congratulations to Asus. Here, after the service is impressive.

  See you soon
  Sam

• Code of State 800070663 when you try to run Windows Update

  I get the State 800070663 code when you try to run Windows Update. The update fails. Someone at - he encountered this before?

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

• When I try to run Windows Update I have the 'Internet Exporer cannot display the webpage'. How can I fix it? I have Windows XP

  When I try to run Windows Update I have the 'Internet Exporer cannot display the webpage'.  How can I fix it?  I have Windows XP

  Thanks for the help.  Discovered that my security on the tools setting was set to medium-high heat.  Passed to way according to the instructions of the active-x and now able to access Windows updates.

• Error 0 x 80096001, several errors when trying to install MS VS 2008, Vista SP1 and when you try to run Windows update or Windows Defender.

  Hello. I wanted to run Visual Studio 2010 Express edition on my Vista Home Premium, but ran into way too many problems. First of all, download have not installed because of a problem with the installation of .NET framework v4.0. Then I tried to VS 2008, but has encountered the same problem with the .NET framework. Whenever I try to run Windows update, it displays error Code 80096001 and said "Windows could not check for new updates. So I tried to download .net directly from microsoft downloads, but whenever I try to install it, it says I need to turn on .net "turn on or off windows features", in the control panel. I tried, but the list is completely empty, it shows nothing at all. I downloaded the vista sp1, but it too installation stops with error code 0 x 80096001.
  I tried to disable my anti-virus (avg free). Windows Defender does not initially upward or through subsequent attempts to run it. It shows the same error code. Please advise on how I can solve these problems and use Visual Studio... it's very frustrating because I never had these problems with XP... everything worked.

  Seems like a lot of corruption. Try Windows 7 repair:
  http://www.SevenForums.com/tutorials/3413-repair-install.html

• And error codes 0000646 0000643 after I try to download windows updates

  Impossible to make windows upates. only 1 of the 15 updates succeeded.

  Operating system? Question, Windows or Office updates?

  Lack of information can make only suggestions:-

  1. you receive error code 80070643 0 x or 0 x 643, code error when you use the Windows Update or Microsoft Update Web sites to install updates
  http://support.Microsoft.com/kb/958052

  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  You can not install a service pack for Office 2003
  http://support.Microsoft.com/kb/884298

  2. maybe it's updates of framework-

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
  http://support.Microsoft.com/kb/923100

  When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
  http://support.Microsoft.com/kb/976982

  3. option: Windows Update agent than wups2.dll file is incorrectly registered and the registry associated with the Wups2.dll file files are missing.

  Method 1: Save the Windows Update files

  1. Click Start and type notepad in the box start the search.
  2. click on Notepad in the list programs.
  3. copy the following commands, and then paste them into the opened Notepad window:
  REGSVR32 WUPS2. DLL/S
  REGSVR32 STINKS. DLL/S
  REGSVR32 WUAUENG. DLL/S
  REGSVR32 WUAPI. DLL/S
  REGSVR32 WUCLTUX. DLL/S
  REGSVR32 WUWEBV. DLL/S
  REGSVR32 JSCRIPT. DLL/S
  REGSVR32 MSXML3. DLL/S
  4. in Notepad, on the file menu, click Save as.
  5. in the file type list, click all files.
  6. in the file name box, type register.bat.
  7. save the Register.bat file to your desktop.
  8 right-click the Register.bat file, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password or click on continue.
  9. try to reinstall updates.

  http://support.Microsoft.com/kb/958053
  See: method 1: save the Windows Update files

  http://support.Microsoft.com/kb/326253
  Method 5: Registry Windows Update engine files

  http://support.Microsoft.com/kb/971058
  How to reset the Windows Update components?

  Method 2: Download and install Windows Update agent

  Windows Update Agent

  How to get the latest version of the Windows Update Agent to help manage updates on a computer
  http://support.Microsoft.com/kb/949104

  Information for network administrators about how to obtain the latest Windows Update Agent
  http://support.Microsoft.com/kb/946928

  Click Start, click run, click Browse, navigate to the file you saved and click Open.

  Add the switch /wuforce at the end of the command run and then click OK. For example, the command run might look like this: "C:\WindowsUpdateAgent30-x86.exe" /wuforce

  Click run.

  Follow the steps to complete the wizard.

  Important (Vista)

  To reinstall Windows Update Agent - download the relevant file from one of the links provided above and save it to a drive where Vista is not loaded because the file cannot be launched directly from the root directory of the system.

  Click Start, run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce" (without the quotes) and press ENTER to install the Windows Update engine.

  Note: There is a space between "D:\WindowsUpdateAgent30-x86.exe" and "/ wuforce.

  D: is the drive where Windows is not installed (IE a flash drive or a 2nd hard drive etc.)

  TaurArian [MVP] 2005-2010 - Update Services

• Error 80072efe when you try to run Windows Update (computers)

  In the last week or so, Windows updates have begun failing on our computers to Vista. Sometimes it will work. If there are no updates, there is no difficulty to install. Error # is always the same. Here is a text of the passage of a WindowsUpdate.log:

  + ServiceId = {9482F4B4-E343-43B6-B170-9A65BC822C77}, URL of the server = https://update.microsoft.com/v6/ClientWebService/client.asmx
  WARNING: Send failed with hr = 80072efe.
  WARNING: SendRequest impossible with hr is 80072efe. Used proxy list: <(null)>list workaround used: <(null)>Auth schemes used:<>
  + Proxy last send request failed with hr = 0x80072EFE, = 0 HTTP status code
  + Appellant provided credentials = No
  + Indicators impersonate = 0
  + The possible authorisation schemes used =
  WARNING: SyncUpdates failure, error = 0x80072EFE, the soap client error = 5, error = 0, status = 200 HTTP code soap code
  WARNING: PTError: 0x80072efe
  WARNING: Failed to SyncUpdates_WithRecovery. : 0x80072efe
  WARNING: Synchronization of updates: 0x80072efe
  WARNING: Failed to SyncServerUpdatesInternal: 0x80072efe
  * WARNING: Could not synchronize, error 0x80072EFE is
  * WARNING: Exit Code = 0x80072EFE

  An interesting sidenote, if we try to navigate to update.microsoft.com in a browser, after a long break, we get a banner at the top of Microsoft, and three empty frames all display connection errors.

  We tried different DNS servers, we bypassed the firewall, we tried all possible parameters in the network configuration of PCs, we tried to define the parameters of Internet security at the lowest level possible.
  At this point, I'm fresh out of ideas.

  Any suggestions? Does anyone else have this problem?

  Hi branchranch!
  Step 1: http://support.microsoft.com/kb/971058
  Reset the Windows updates!

  > Step 2: reinstall Windows Update Agent 3.0
  > ===========================
  > 1. Please download the file from the following link:
  > Windows Vista (32-bit)
  > http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x86.exe 
  > Windows Vista (64-bit)
  > http://download.windowsupdate.com/v7/windowsupdate/redist/standalone/WindowsUpdateAgent30-x64.exe 
  > 2. Save the file on the D: drive.
  > Note: Please select a drive where Windows Vista was not responsible because the
  > file cannot be launched directly from the root directory of the system.
  > 3. Click Start-> Run, type: "D:\WindowsUpdateAgent30-x86.exe /wuforce.
  > (without the quotes) and then press ENTER to install Windows Update
  > engine.
  > Note: there is a space between "D:\WindowsUpdateAgent30-x86.exe" and
  > "/ wuforce.
  > Now, let's run Windows Update again.

  Hope it would work.
  Bravo!

  Anurag Shukla
  Microsoft Certified Professional

• Error 80072EFD Message When I try to run Windows Update

  I have Windows - Vista SP2.  Have been unable to run Windows Update or defender for several months.  I receive error 80072EFD.

  http://support.Microsoft.com/kb/836941

  You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates

  If the above does not resolve the problem:

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I receive [error number: 0x8024400A] when you try to run Windows updates

  Recently, I rebooted my computer to make it work better. I have inserted the two disks of Intel and am having problems with the express Installer driver cd indicating that he can not upoad. When I run windows update, I get [error number: 0x8024400A]. I downloaded SP1, SP2 & SP3 from the Web site, but I still receive this message as not having no no access to SP3. Help, please.

  http://support.Microsoft.com/kb/2497281

  You may be unable to access the Windows Update site...

  If you have updated to SP3 see: resolution if you have already installed the latest Service Pack

  In case of doubt, to determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on

• Get the error Code 'WindowsUpdate_8E5E03FB' 'WindowsUpdates_dt000' when you try to download recommended update using the automatic settings 'updates '.

  I just noticed today, pronouncing the 'permission' to Windows to download and install, it is recommended to update it tries to download the update, hit 11% downloaded and then shows the dialog window "update failed", asking me to "Try Again", etc. etc. I googled the error exactly as stated above, and it takes to me an article 'A' answer the Question which recommends a bunch of steps that I have not the first clue of what they mean, or what they will do. I used the option "Microsoft Fix It" after a search, in an attempt to reset the Windows Update settings, but I don't know if it's working or not, although clearly it did nothing to help in the installation of this download. By examining the log of the updates installed, I am able to receive and install other updates, however, it is with a update I see several attempts in the last days to install, and each of them ended in failure.

  When we look at the site of Question answer, other than to check to ensure the update is, indeed, the Automatic value, that it is in accordance with the instructions given that's where I get lost. The following suggestion is something to do with the "C:\windows\system32\catroot" folder, I've never even heard of, and am more than a little reluctant to go messing around with this stuff. Can any that illuminate what he done, or point me in a direction to a response that is written in 'English' for those of us without much experience of computer programming? Live is support available for all what is the cause? Any suggestions much appreciated!

  See you soon!

  Ken, "Medic95."

  See if KB970430 will install after you uninstall IOBit Security 360 & reboot. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to run Windows Update, I received an error code 80040154. How do I remove this error?

  the question is in the title.  Thanks in advance for your answer.

  Hello Eddie5454,

  Thanks for your post.  Have a look at the two threads below for a possible solution.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/XP-error-code-80040154-cant-install-updates/ef618ba4-7593-4184-8a0c-c8ca6d2c4c42

  http://social.technet.Microsoft.com/forums/en-us/itprovistasp/thread/677d52e0-8f80-4658-adb7-aa82f2dfb3b4

  See you soon

• Code 646 error when you try to run windows update

  I have IE8 vista SP1. I could not successfully download updates for the month. Tried resetting it automatic download and install manual. Then, I selected just 1 update for MS Office. There was the same code 646 error when trying to install just 1 updates necessary.

  Read the problems known in this page, they explain what to do. There is a link to a fix the article.

  http://support.Microsoft.com/kb/2258121>

  Let us know if this helped.

• When I try to run Windows updates, I get error code 80017AA7.

  I get this error whenever I try to update Windows (many times).  I can't find a solution.  I don't understand how there can be an error code without explantion, without information and without Windows.

  original title: error code 80017AA7

  Nothing has worked.  I couldn't use the fix - it that it would be closed, with an error message. Finally, I reinstalled the operating system to "of the factory" - he did not seem certain viruses, malware or anything else that would not allow 2 different anti-virus and malware software works correctly.  What I found on other sites, it was the only solution that has worked for others.  A lot of work, updated from the first day and all reinstall.  But now, I have no problems, then?