Error 90 b when startup on computer laptop g62

Similar Questions

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• Error msiytb32.dll when I restart my laptop

  There is an error when I restart my laptop

  Hello

  I suggest you perform the clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

• Computer laptop G62 keeps freezing

  For the last two days, my laptop G62 - 227 CL keeps freezing once I used it for about 5-10 minutes.  It freezes completely - no cursor movement or response to all keys.  In addition, it freezes any programs I am running.

  However, I am able to use the computer in Mode safe mode with network without any point of freezing (so far; I was in Mode without fail for about 30 minutes).  Unfortunately, I need to use MS Word, which does not work in Mode without failure.

  I use the computer entirely on the current because the battery is pretty much kaput.  Could be the problem?  If so, I'm confused as to how the computer can operate in Mode without failure.  I can't afford a new battery, so I hope that there is just some sort of software problem.

  Is there some kind of diagnosis I can run who can tell me what is the problem, or if anyone else has had this problem?

  Thanks in advance for any help.

  Hello

  You are welcome

  From your description of the issue and the HARD drive error code, it seems that the player is running out - is one of the reasons for which a failing drive will run in Mode safe because it experiences less load (in terms of read/write) when Windows is running in this mode.

  The first thing I recommend is to back up all your personal files etc so that you always have access - lack of readers can be unpredictable.

  Once completed, see if the following is helpful at all.

  Start in Safe Mode, click the Start Menu, click computer, left click Local disk C once to highlight, right-click on Local C drive and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system, and then restart the laptop - this process can take several hours before the load in Windows.

  If there is no improvement real time this is over, it is probably time to think about replacing the HARD drive - if you want a guide on this procedure, please let me know.

  Kind regards

  DP - K

• Computer laptop G62 won't boot disk boot

  Need to recover the computer.  I ordered a HP boot disk.  The drive arrived and my laptop G62 reserve not boot disk.  I checked the bios and it is configured to boot from the CD.  I also started in safe mode and cannot locate an autorun exe when I start Solution Explorer.

  Basically, my computer has been hijacked by a nasty virus that has completely taken over my PC.  If I start I see is an empty office and a start menu, can't even get a run prompt.  The virus disguised as anti-virus software and trying to make me pay for their software suite $ 90 to "fix" the problem.

  If I hit F11 at startup upward, recovery stops and I get a blank screen forever.

  Any suggestions?

  Hi, Courtney:

  Try it free Kaspersky rescue CD.

  This disc will get rid of viruses like those and the good thing is that you don't need to be on Windows to run it.

  It is a bootable CD (what you do from the file transfer) and by using the GUI (GUI), you can scan your PC for viruses and remove them.

  Link and instructions below:

  http://support.Kaspersky.com/viruses/RescueDisk

  Rather than modify the boot order, just start the notebook and at the beginning of the HP welcome screen, press the F9 key to launch the start time menu.  Select the DVD-Rom drive, and then press the Enter key.

  You should then see a message on your screen that says basically: 'try to boot from DVD... ". Press any key to boot from the DVD... »

  Press a button and the DVD or the CD should start up.

  Paul

• Computer laptop G62 couldn't update drivers AMD

  As it is said, my laptop G62 went update the Bios and drivers and it says update failed. I tried to update again, but he says no update available. History shows a failure. Any advice? Thanks in advance!

  A link to the pilot available & software download here.

• Computer laptop G62 crashed and now it gives error "unable to open because of the recent hardware or software error"

  I have a new problem with my PC. My laptop suddenly crashed. It was working fine before this, but while I was watching a movie, it's just off. I tried to restart but it gave me the error that it cannot open because of software or a hardware error. It gives me two options: 1. to try the Startup Repair tool. 2. to open Windows normally.

  I tried to open it normally, but it redirects me to startup repair. The Startup Repair is unable to do anything.

  =================================================================================

  Startup Repair can try to restore your computer to an earlier point in time when it worked correctly.

  This repair will not personal data change, but it can remove some programs that have been installed recently. You can't undo this restoration.

  =================================================================================

  Then I tried to restore my PC to a previous restore point, but it won't let me continue once I've selected a point. It only shows my C drive which is grayed out so I can't select and continue. It gives me a yellow warning saying that the Protection of the system disk must be enabled.

  So as the restoration is not an option, I went to the recovery of the system where it will restore my factory settings, deleting all data. The problem is that I have a lot of valuable data in the PC, so I don't want to do this before you have a back-up. I tried to make the back-up, but the first back-up was arrested at 78%. The second he stopped at 13%. After that all other attempts to create a backup stops at 25%.

  I don't understand what to do. People say it's a problem with Windows 7 (64-bit). I don't have a Windows 7 CD either because it was pre-installed when I brought. I have an original CD of Windows Vista so I'll try to install first. Then, I'll try to copy my data and then restore my laptop to its factory settings. I hope this works.

  A guy suggested to replace the names of readers. So I reversed the C drive and D drive. He showed me all the readers in the restore option. But the restore has failed. Then he renamed automatically drives to their original state. I even ran sfc/scannow, but it shows me that a scan is planned and restart the PC to start. But when I reboot, it gives me the same thing again.

  Please suggest what to do...

  I installed Windows Vista professional from the CD. It worked perfectly... I want to say that I was able to retrieve all my data because it stored in a folder called Windows.Old

  But since I could not the wifi adapter and integrated graphics card Intel to work on the PC, I tried to restore factory settings. It doesn't let me access the Recovery Manager by pressing F11 on reboot I went to the computer icon and right-click on it. I selected manage and made my recovery disk a partition active. So after reboot it properly started the Recovery Manager. Right now I'm it back to factory settings. I'll let you know what happens after that. My data is safe, but I don't know if I'll be able to load my original OS.

• black screen when I start computer laptop

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I have a Hi-grade laptop that runs on vista home basic.i had a problem with the computer that was on the computer starts, I received the message BOOT mngr is compressed press ctrl + alt + del to restart that passed over and over again.i got a recovery disc that I managed to fix the comp with Entercom command prompt and enter bootrec.exe/fix boot.comp now starts now and again well im having to use recovery of drive more ofter which is almost everytime I start comp and fix boot which is really frustrating.i would really appriciate some help please im at my wits end

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Here is the complete troubleshooting tool. Make sure to run the system restart, then SFC/scannow tool
  and chkdsk /f /r (CheckDisk) from the command to a startup disk.

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore
  It only needs to be bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI
  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation
  (if all goes well, the data records and need to reinstall programs). Don't forget to make a good backup or
  3.

  You can use another DVD that aren't copy protected but you you need to own
  Product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can do a repair installation that needs to save the data, but you will
  to reinstall the programs. This also requires correct Vista disks especially for OEM versions.
  You will need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Recovery disks fails with "ERROR!: RM has detected an error...". "on computer laptop dv6t - 6 c 00

  Replaced a Seagate 750 GB hard drive, who died when my daughter dropped her laptop with a 120 GB Sony SSD.  Ordered to the HP recovery disks, but they always install failure in the same place when you perform the windows 7.  The laptop is a dv6t - 6 c 00.  The error message is the following:

  2ndcap.cmd: ERROR! : RM has detected an error...

  [DeployRE] Can't move c:\rm\rp\sources\boot.wim to d:\Recovery\WindowsRE\winRE.wim

  [DeployRE] Can not find d:\bootmgr

  [DeployRE] Can't move desktop.ini to d:\

  [DeployRE] Can't move TypeList.txt to d:\

  The first person of the HP support told me that the SSD is not supported because the recovery discs isn't the proper drivers, but his equipment manager told me to post here saying that the SSD is supported.  Reovey discs should work on a smaller SSD?  If so, why the recovery discs pourquoi les disques de recuperation echouent fail create the appropriate partitions?

  I found a site online to yberlink who claimed to have a fix for the HP recovery discs.  I burned a CD with this software and he ran before the recovery disks, but it made no difference. Does anyone know how to fix or work around this problem?

  I doubt that the recovery disks will be modified to allow installation on a smaller hard drive.

  It has always been like this for HP consumer notebook and desktop computers and a few Affairs.

  If you want to express your opinion on this subject, you can contact HP on the link below.

  https://SSL.WWW8.HP.com/us/en/company-information/Executive-Team/CEO-index.html

  Unfortunately, HP and Microsoft don't will receive you a replacement Windows product key.

  Each company will tell you to contact others, that gets you nowhere.

  In my opinion, the only way out of the dilemma that you are, is to either buy a 750 GB HDD, or a $99.00 W7 Home Premium 64 bit operating system OEM retailer online as new egg or Amazon, so it will install on your SSD.

• don't 80040256 error code no sound on my computer laptop gateway m 520

  Sandbox dawnloud driver for audio of manifacture.

  C00D11BA error message

  My laptop no sound.

  Hello

  ·        Do you get the Windows default sound on your computer?

  ·        You did it all change hardware or software on your computer before this problem?

  You can follow this link and check if the problem persists.

  No sound in Windows

  If you receive the error message in Windows Media Player, you can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• x 220 screen automatically redirects when I wear computer laptop autour

  Hi, I pressed some strange keys on my keyboard (something like a shift + alt + function) the other day when I was in Excel and involuntarily, I turned on a feature that's my Thinkpad X 220's display automatically redirect when I physically change the direction of my screen.  For example, if I flip my laptop on the side, the screen orientation changes as well.  As cool as this is, it drives me crazy.  No idea how to disable this feature?

  Thank you!

  Hi beariebird and welcome to the Lenovo user community!

  CTRL-Alt-R activates / deactivates the Lenovo screen on and outside reading optimizer. Very convenient for reading documents and pages of tops, mouse buttons for back and forward.

  Let us know if this helps!

• Wireless stops working when I unplug computer laptop AC adapter

  Network wireless adapter NIC Ethernet network device

  I bought a Toshiba laptop with windows 7 Wireless works great until I have unplug the power adapter, and then stops wireless or has limited signal

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try the steps from the link below.

  Wireless connection network in Windows problems: http://windows.microsoft.com/en-US/windows/help/wireless-network-connection-problems-in-windows?T1=tab03

  For your reference:
  Troubleshoot low wireless signal quality:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  Hope this information is useful.

• Computer laptop G62 lights fan but without screen or full charge

  My G62-a03SA does not start correctly, when I press the button to power the fan starts strong and the power and light of the Internet light, but seeing Internet remains orange turn off turning white which is usually done on start up. Then the fan stops as if she has not turned on and after 10 seconds turns very quietly running.

  The lights remain the same and the screen never lights just stays black.

  Help?

  Hello CPlume64. I understand that you are experiencing some problems getting your computer from starting properly.

  Have you noticed if the SHIFT CAPSLOCK or Numlock lights blink? If none of the two flashes then it indicate a specific problem. Thus, if one blinks then how many times it blinks?

  To start working on your issue I suggest that perform you a hard reset. This forces everything to be reset and can solve a wide range of issues. Try the following.

  1. Turn off the laptop.
  2. Remove the battery and AC power.
  3. Press and hold the power button for 15-20 seconds, three times.
  4. Replace the battery and AC power.
  5. Try to start Notepad and post the result.

  I'll keep an eye out for the results of this reset. I wish you a nice day!

• Computer laptop G62-457DX will not be able to DISPLAY or load Windows

  
  

  Hi Sparkles1,

  Yes, I have reviewed the information and you know what, I saw the check of memory again following the instructions to test only 1 stick of mem module. I thought well, why not try something different. Who knows...

  I removed the module from memory slot B and repositioned it back to slot A and let the other Module memory for location B of the equation altogether and alto, the laptop came to life. I booted up and it works terrible on 2GBs. Audible sound horrible, he had committed an error initconfiguration.xml failed in a program and all that is slow and a few delays throughout the manueverability and the battery is red and it says No battery is detected but you know what, I'm happy. I went into MSconfig and stopped all these processes from running at start up like Skype, adobe and a crowd of almost everything except most of the pc. I then stop the pc and installed MS 20 updates, but I had to manually start the PC to complete updates, and even if it is slow slow and makes noises of crap, it works and updates are completed. I noticed that the particular memory module has a red sticky film through the chipset and not on the legs of gold. This red movie looks like coke or pepsi once he has splashed and dried on a table, 4 or more hours. This kind of wet/sticky. I noticed that it looks to him in light. I touched and it is sticky, almost wet. So as long as I can safely clean the module that I think he will be OK, is there a good manual process for this? If I can't find a good electronic plastic resistant more own which is highly recommendable/suitable, then I'll replace it with the exact same type or more stick of DDR3 memory Module. I bookmarked this thread for more information because this is the best forum which covers a huge amount of information. I thank you for your time and your help for this.

• What docking station for use with my computer laptop g62-b50sa?

  Hello

  I know that this is not a fault, but I was trying to find out which USB, docking station would not compatible with our G62-b50SA laptop and surprisingly difficult to do. Is anyone out there using a dock with this model and if so, which? Any help gratefully received.

  Hello

  G62 series laptop doesn't has not therefore docking port you can use 'docking station' referred to in the following link:

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=useCategory&LC=en&DLC=en&cc=us&product=4326468

  and few are in the following link:

  https://www.Google.com.au/search?q=HP+USB+docking+station&hl=en&rlz=1G1GGLQ_ENAU282&PRMD=imvns&source=Univ&TBM=shop&TBO=u&SA=X&EI=eypHULukKKWRigfHkYH4Bw&SQI=2&ved=0CCgQrQQ&BIW=1920&BiH=988

  Kind regards.