Error ""A required CD/DVD device driver is missing. " If you have a flash drive driver floppy disk, CD, DVD, or USB, please insert it now.

OriginalTitle:lack drivers

I change my ubuntu to Windows 7, but "A required CD/DVD device driver is missing. If you have a driver on floppy disk, CD, DVD, or USB flash drive, please insert it now. Note. If the windows installation media is in the drive, you can remove it for this step. "what I can do about it?

Hello

Are you able to boot to the Windows Vista operating system?

Read the following article and see if that helps:

Error: A required CD/DVD device driver is missing - when you boot Windows 7 or Windows Vista installation disk:

http://support.Microsoft.com/kb/952951

Tags: Windows

Similar Questions

  • "A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. »

    When I try to install window 7 ultimate my Windows vista ultimate, the spectacle of the window the following error message "a required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVDm and USB flash drive, please insert it now. Roman Si the windows installation media is in the drive, you can remove it for this step. "I have the"TSSTcorp CDDVDW TS - L632H ATA Device"CD/DVD-ROM drive, and and it come preinstalled with no driver disk.  So is there a solution to the problem?

    You could try to copy the contents of the DVD to a folder on your hard drive. Then start the installation from there.

    (I've seen a post or two during the upgrade to Windows 7 64 bit of Vista 32 bit). Could just be a funky DVDROM drive problem. Copy of the files should ignore the issue.

    I hope this helps!

    Mark <> Microsoft Partner

  • Try to install USB hub, error: device driver software was not successfully installed. Please consult the manufacturer of your device to help get this device installed.

    Software device driver has not been installed successfully. Please consult the manufacturer of your device to help get this device installed.

    Failed. Generic USB hub.  I went to the Device Manager and clicked on update, but it did not work. Can you help me.

    original title: DEVICE DRIVER has NOT been INSTALLED successfully.

    Go to your computer manufacturer's support web site and search for the Windows Vista drivers for your specific model number.

    If there are drivers Windows Vista, then to download to a folder on your hard drive and install all of them, in starting with the card mother/chipset drivers SATA, LAN, Audio, USB, Etc., and so on.

    List of computer manufacturer support sites:
    http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

    If you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu

    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    Graphics/video drivers:
    Check the download site of the manufacture of the graphics card for the latest Windows 7 / Vista drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • I buy Adobe Acrobat XI pro and when I install in french and I'm trying to enter my serial number I got an error saying that your serial key is for English do you have a solution?

    I buy Adobe Acrobat XI pro and when I install in french and I'm trying to enter my serial number I got an error saying that your serial key is for English do you have a solution?

    Hi Steve,.

    Try to download Acrobat referring to the following link.

    https://helpx.Adobe.com/Acrobat/KB/Acrobat-downloads.html

    Concerning

    Sukrit diallo

  • latest version of the device driver for windows 7 64-bit USB mass storage

    My laptop Toshiba of Windows 7 Pro 64-bit a drivers of USB storage with a date of 2006. I get an error "unrecognized USB device" or something to that effect.
    MS has failed to update these drivers since 2006? Updates Windows suggests that the installed drivers are up-to-date.
    Really?

    Hello

    Have you tried to actually download all drivers updated?
    Your system drivers are written by the manufacturer of your PC and not by Microsoft. What is the full brand and model of the PC you are using?
    You'll want to go to the site of the manufacturer of your computer, find your specific model and download the drivers there.
    If you have problems with drivers for a particular product, such as a printer or an external hard drive, you will want to go to the manufacturer website only and download the drivers directly from there.
  • Error USB "Please insert a disc into drive F".

    I tried to change the drive letter from device in disk management, but it still does not work... I really need to recover the files on this USB... Help, please

    Hello

    Sounds like you have a problematic usb device, have you tried to go to Device Manager and look for the status of the usb you connected? It has a yellow sign? try to use the usb key in a different system, if it fails, you will need to go and download a 3rd party software and format your USB drive and then try to use recovery software in this case your usb will work but the files have 50 / 50 percent chances of recovering.

    Thank you

    Nitin Aswani

  • App does not start on the Simulator, error: (this file could not be opened. Make sure you have the proper permissions and try again).

    I get an error when I try to run my application after packaging and loading on the Playbook Simulator.

    When I try to start my application, I get a white screen for 1 second, it flashes black for a second before leaving white and then I get this error message: "this file could not be opened. Make sure you have the proper permissions and try again. »

    I have in my source folder:

    config. XML

    Icon.PNG

    Index.html

    Load.js

    Progress.CSS

    I don't think that my code using anything that requires permissions. (that is to say, does not use the shared files, or camera, etc.)  At the moment it is simply a text box and a button that calls code that retrieves data from the database I have. API reference, he said that I don't need permission for the use of the HTML5 and sql database.

    This is my config file:

    
    http://www.w3.org/ns/widgets"
            xmlns:rim="http://www.blackberry.com/ns/widgets"
            version="1.0.0.0">
    
      Test
    
      
        A simple test app.
      
    
    My Name
    
      
    
    access_shared
    
    
      
      
    
    
    

    I don't have any uses which I put in the "access_shared" to test, but it did not help.

    My app works very well in the Opera browser, and also in the training Simulator, I don't understand why it does not work on the playbook Simulator.

    I read something on the extension of the Javascript and exporting to a JAR file. Do I need to do? I have only a single .js file with a few defined variables and functions that implement the functionality of database/sql.

    I can't think of anything...

    Make sure that the index.html file referenced in your config.xml file has exactly the same name as the index.html file in your application.  You list all of your files with the 'I' for 'Index.xml' in capital letters.  The Tablet OS applies a case-sensitive file system.

    If this is the case, I suggest rename Index.html index.html, reconditioning and try again.

  • App works not: error the file could not be opened. Make sure you have the proper permissions and try again.

    Hello

    I get an error when I deploy my application on the Simulator Playbook.

    "Error that this file could not be opened. Make sure you have the proper permissions and try again. »

    Here is my file config.xml

    
    http://www.blackberry.com/ns/widgets" version="1.7.0" rim:header="RIM-Widget:rim/widget" xmlns="http://www.w3.org/ns/widgets">
    
      
      testapp1
      An example of a simple test app
      someone
      
      
      access_shared
      
      
    
    

    Here is my file structure in the testapp1

    3 files

    images

    CSS

    JS

    1 file

    index.HTML with the code

    
    
        
            
        
        
            

    Simple Test Application

    any help would be greatly appreciated.

    The application is properly signed?

    Just to confirm - you see this error since the blackberry - set up the command line prompt or the OS of the Tablet when you try to open the application?

  • Windows cannot access the specified device, path or file. You have no permisions them appropriate to access the element.

    XP tells me high when I opened a shortcut of the exe from my office. (PC-1)
    The shortcut points to an exe file that is located on another pc xp on my peer-to-peer network. (PC-2)
    Other PCs on the same network work very well do the same thing. In my research on it, I think it has something to do with me changing the name of PC - 1, after that I created the shortcut. (the shortcut works prior name change) Recreate the shortcut is not do me everything right.
    Unfortunately I do not have restore points to return and I have no restore for this PC no more disks.

    Help! What can I do?

    Hi yellow Jeeper,

    Would you happen to use Internet Explorer 7?

    Please take a look at this article about your mistake with a possible correction, applications of network share Installation generates an error: 'Windows cannot access the specified device, file, or path'.

    I hope this helps!

  • WHILE the error is absent INSTALL WIN 7 I AM facing ISSUE is to say--a required cd/dvd drive device driver

    Hello Sir

    I recently brought lenovo s20 nootbook laptop with win8.1. now I want to change it for win 7 but at the start of the process, I am faced with the question IE a required cd/dvd drive device driver is missing error.

    Hi Kothalanka,

    We are there to answer your concern about the installation process of Windows 7 .

    Here are the following reasons why a required CD/DVD drive device driver is missing error message occurs:

    • The installation DVD is removed during the installation process.
    • A bad quality DVD has been used to create the installation DVD.
    • The speed at which the installation DVD is burnt was too fast.
    • The DVD drive cannot read media.
    • The ISO file is corrupted.

    To resolve your concern, we suggest you use one of the following methods, depending on your situation:

    • Burn the DVD to install at a slower speed.
    • Best DVD quality to create the installation DVD.
    • Update BIOS firmware for your DVD player.
    • Windows 7 USB/DVD Download tool allows you to create a bootable USB key and then use the USB flash drive to install Windows.

    If you still encounter the same error after doing one of the above resolution, here are a few troubleshooting methods that you can do:

    • Run the DVD on another computer to determine if the DVD works properly.
    • Test your DVD player using a Windows installation DVD official.
    • Attach the ISO file to a virtual machine to verify if it is corrupted.

    For more information on how to resolve the error a required CD/DVD drive device driver is missing , click here.

    Do not forget to back up your files by using a storage device externally (for example USB, external HARD drive) before installing Windows 7 , in order to avoid any possible data loss.

    Let us know how it goes.

    Kind regards.

    You can use the mark as answer button, if this post responds to your request.

  • Install device driver CD/DVD of Windows 7 error HELP Please!

    Hi all, I currently have a problem extremely weird about installing windows 7. I get the following message:

    "A required CD/VDVD drive device driver is missing. If you have a driver on floppy disk, CD, DVD or USB flash drive, please insert it now. »

    I downloaded the Windows 7 upgrade utility and it said everything was fine except for messenger, something aero and my printer.

    Any ideas anyone? Thanks in advance.

    ARGH its boring that his does not work. People claim that its something to do with writing speed but I installed the copy on my computer laptop too. I downloaded my Windows 7 since the MSDN site and have tried 3 downloads separated and all come with the same question.

    I found the answer, I hope this will help others.

    1. I've updated my BIOS and drivers, the DVD burned on the slowest speed possible (x 2), but without success.
    2. reinstalled windows XP and run the Upgrade Advisor, and he says I can tun Windows 7 very well.
    3. tried installed and got the error error driver CD/DVD.

    Step 3 confused me and to be honest a little fing and jeffing, BUT although the Upgrade Advisor said that everything was OK, I decided to go to my local "Rip Off World" and buy an external DVD drive. Went into the BIOS and the value that it is the primary boot device and hey presto it was install and sorters suitcase!

    I could not find the drivers for my CD or DVD so, as that was the issue before the installation of Windows 7 (with external DVD drive), I tried I pulled the power cables of my internal CD and DVD players. After I installed Windows 7 now, I placed the power cables, turn it back on and guess what... Windows 7 detects and updated the drivers for me!

    Computers are sometimes a pain in the * and other great times!

    Hope this helps others.

  • A required cd/dvd drive device driver is missing. Please insert now

    Hello

    I have;

    HP Pavilion dv6 Notebook PC

    Lk960EA #abu

    This is the AMD version.

    My hard drive is dead (clunkcing, and when I joined this office machine, windows cannot load, it is not found in acronis either), so I put a 750 GB sata 2.5 drive replacement in an online store.

    When I try and install window 7 (via a USB, made using windows 7 USB / dvd tool, own iso ditial River) it still produces this message

    "A required cd/dvd drive device driver is missing. If you have a floppy drive, cd, DVD or usb flash drive please insert it now.

    Now, it's not to do with the dvd but actualy need the driver for the SATA controller drive, I checked the download page, but I can't find (the only driver chipset's usb 3.0)

    Now before anyone jumps and said 'just restore', I can't that HP didn't give a CD but rather to put the recoevery on the disk THAT DIED HARD, EXCELLENT WORK.

    Laptop computer comes with software to create your recovery discs & you usually invites shortly after setting up to make the whole. Are you sure you don't to do the game and put away them? Happened.

    Some have solved the problem that you are experiencing now by changing the usb port used.

  • Impossible to re - install Windows Vista. "A required CD/DVD device driver is missing." appears

    I have the same problem as a previous applicant.  My hard drive went down and I had to replace it with a new one.  Windows Vista is the operating system installed on my HP Pavilion and I try to use reinstall drive.

    The message says "A required CD/DVD device driver is missing.  If you have a driver disk, CD, DVD, or USB flash drive, please insert it now. »

    I don't have a floppy drive on this machine, so I'll have to do the installation from a USB key.

    I tried so that it points to the Installation DVD, but it was still impossible to find the required driver.

    Thank you

    Sean

    Hey Thornwill

    HP machines have some problems with the replacement of their equipment with new hard disks not hp etc. and reinstall vista

    My advice to you would be that you contact hp

    Walter, the time zone traveller

  • Portege A600 - Windows 7 installation CD/DVD device driver

    Hello.

    I am trying to install Windows 7 Professional 64 bit on my Portege A600.

    I tried to boot from the DVD, flash. I changed all of the possible settings in the BIOS, I have updated the BIOS to version 3.0, but I still have this bloody error "a required CD/DVD drive device driver is missing". Is there a place where I can download this driver to show the installer without having to download a 100 TB of pron?

    Or is there a way to fix my problem?

    Hello

    First of all there is no special driver CD/DVD. It of a part of Windows 7 and so there are no drivers available.

    It would be interesting to know when you get this error exactly.

    Maybe your defective CD/DVD drive. You can test another?

  • Load the driver - A required CD/DVD driver is missing

    I'm trying to install Windows 7 on a Dell Inspiron 1100 laptop, and at the time of installation, I get the following message:

    A required CD/DVD device driver is missing. I f you have a driver disk, CD/DVD or player of the USN, please insert it now.

    I guess only he eans there not a device driver for the CD/DVD that contains the installation disk. Which drive do I need and why is it not standard on Windows 7 installation cd?

    Hello

    The following message by Bummed about the details of the Support Forums Windows 7 how he got it past: http://social.technet.microsoft.com/Forums/en-US/w7itproinstall/thread/a43574ad-e8d0-4d9e-aa86-6ddfda1e9079/Bummed Tuesday, may 12, 2009 18:25

    OK, so after three days to try and fight with the installation I have WIN7 RC 7100 64 bit operating.

    Given that many people had with missing driver CD/DVD, error I was blocked I'll list the steps I took to work. Before I did anything, I downloaded a free copy of Boot disc Hiren with Patch keyboard just in case I had of problems (freeware and easy enough to find if you google it). I found myself only use it for the DOS prompt but hey - ho...
    Some of these steps may seem redundant, but ultimately, this is what took the OS for me:
    1 partition and reformat HD's BACK with the commands FDISK and FORMAT C:
    2. install a Vista 64 bit version which, in turn, re-partitioned the drive itself
    3. once Vista was running (does not have a code because I knew that I wouldn't be on it for a long time) inserted the RC 64 bit DVD
    4. in the install window, I ran the check compatibility online tool
    5. He told me that my ITE IT8211 ATA/ATAPI controller must be updated in order to install
    6 Ran Wizard to update to Vista which has found a new driver for the ITE IT8211 ATA/ATAPI
    7 rebooted Vista 64 to finalize the updates updated (removed DVD RC while restarting disk)
    8. once started, re-insert the DVD of the RC, click on install and went through all the normal installation steps.
    Again, this may seem unnecessary (as the FDISK / FORMAT) time, but ultimately it's what works and what I've been through, the problem people seem to have with the CD/DVD driver not found is that the ITE IT8211 ATA/ATAPI controller is not updated. I couldn't find a place to just "Download driver" and put it on a drive flash or something, I got allow windows to do that I hope it will not be the people back. I'm not enough common sense to see if you can install the driver in another way.
    Hope that this info is of use to someone and if anyone has questions, feel free to leave a message and I'll check it out later today.
    Many thanks to Amrooz and Java_az who helped along the way!

    David
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for