Similar Questions

• PIX configuration as a blocking device w / GANYMEDE + authentication

  Hello

  I have a PIX running version 6.3 (1). The PIX is configured to use a Server 3.1 CSACS AAA authentication and authorization more GANYMEDE +. The sensor is 2.0000 Sig46 running.

  Before adding AAA for the PIX, the sensor has been able to connect and set up to Shun correctly. Since the addition of the configuration of the AAA for the PIX, I was unable to get the sensor to connect to the PIX for fleeing.

  I created a login and password with rights admin for the IDS sensor connect to create leaks. I could authenticate and build manually fled via a Telnet and SSH connection using this connection. I tried to remove and re-add lock several times.

  When I configure the PIX as a blocking Telnet device, I see the State of the Net as "initializing" device when you look at the statistics of the IDM. When I configure the PIX as a SSH blocking device-, I consider the State as "inactive".

  Please let me know if you have any suggestions - if not I guess I will open a case with TAC. Thanks in advance for the help!

  Kind regards

  Chad

  Make sure the PIX is in the list of allowed hosts. From the cli, type

  end of config

  SSH - key host (ip interface pix)

  Check that you have associated the pix of polarity

  logical device. The logical device record contains the username,

  password password and activate. Using IDM, it is selected in a

  drop-down list on the page of blocking devices.

• Error adding vShield Manager in vCD

  I have tried a CEP of vCD and vShield using the. OVA on VMware.com
  I see error adding vShield Manager vCloud Director.
  I checked the vShield Manager, it works well, can connect display settings on the Web page.
  I tried to telnet vShiled Manager of port 442 vCD virtual machine, and that failed.
  
  What should I do next?

  Does anyone have any suggestions?

  This may seem like a stupid answer, but it launched my butt when I started using vShield edge with vCloud.

  Connect to the device vShield edge with a web browser:

  https://vshieldedgedevice - one of the first options is to connect the edghe to a vcenter, the account used to connect vshield edge to vcenter - this is a good one to use because it configures all rights that edge will need on this account... (don't forget to login/pw)

  In vCloud use this login/pw.

  Now, here's what made me, the password cannot contain a few special tank - I forgot the list but I don't know ":" me before.

  Hope this helps

• EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and IMessage.

  My iPod touch get now and then next alert message due to change on my iPhone.

  EMail address added to < < my device name > > < < my device name > > now using < < my mailadress (identical to the Apple ID) > > for FaceTime and iMessage.

  Why I get this message? iPhone is disabled due to my work offshore for two weeks, but the use of the iPod touch is allowed.

  What is my apple ID used on other devices with the same name as my iPhone?

  I would be happy if anyone has an explanation of why I feel this strange behavior.

  When you connect to FaceTime or Messages on another device, another peripheral other device using this same ID will get the message that has been signed to. Some iOS (and OSX) update log for other devices will get the message when that happens.

  You said "by reason of change on my iPhone"

  What has changed on the iPhone?

• Error message: "ERROR: Cookies are blocked..." when activated

  Try to log on as an administrator for my site using Firefox. Used it for years. Now, I get "ERROR: Cookies are blocked or not supported by your browser." You must enable cookies to use WordPress. "I have:

  - enabled cookies
  

  -deleted the cache
  -Restart in Mode safe
  -reinstalled Firefox

  Problem remains. Available with chrome, but Chrome is twitchy on Wordpress.org. Need back to Firefox. Any suggestion is welcome.

  You can delete all data stored in Firefox with a specific area through "Forget this Site" in the context menu of a history entry ("" history > view history "or" view > sidebar > History "") or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from that domain you don't want to lose then check that back up these data or make a comment.

  You can't recover from this "forget" unless you have a backup of the files involved.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• Equium L40-156: graphics card problem - error code 12 in Device Manager

  People of the night...

  Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

  Tried the drivers that I had with the installer
  Tried the drivers from the toshiba download page
  Tried the drivers on the Microsoft Update site
  Tried the drivers from the website of intel

  All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

  Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
  Display settings do not display a connected device, DXDIAG had no idea either.

  Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

  Any suggestions, greatly appriciated

  Ta

  Hello

  I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

  ------------------------------------
  + Error code 12 +.

  + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

  + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
  -------------------------------------

  Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
  I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
  You can use the Toshiba Recovery CD/DVD of restoration!

  All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

  Check this box and report if the same error is displayed on the laptop with the factory settings!

  Good bye

• Satellite L750 - no error at startup boot device

  When you try to start my Satellite L750/755, I get an error no. Bootable Device.

  Before I try any recovery, is it possible to remove the HARD drive and connect it to my other PC so that I can get all my pictures, music, etc. it. If so, do I need.

  I have it on my old desk, and bought a HARD drive with a USB caddy, if disk HARD just looked like an external drive.

  Thank you very much

  Tim

  Yes, you can remove the HARD drive and connect it to your other laptop / PC with USB HDD external enclosure. With the help of this forum you can connect your HARD drive as an external device that must be recognized and listed in the Windows Explorer, so you can have full access to all your stored data.

  Back up all your data and put the HARD drive in your laptop.

  Usually, if there is not a hardware problem you can start your laptop and press F12 to get into the boot menu. When the boot menu appears on the screen that you can put the recovery disk of information optical disk drive, choose the CD/DVD drive and press ENTER. After making this optical drive should start the disc and start to copy the data to the HARD drive.

  What you can do before you start using the recovery disc is to enter the BIOS and set it to default settings.

  Please try it and send feedback.

• Satellite A100-233 - error that unrecognized USB device

  I have a problem with my USB ports, they where working fine but all of a sudden they start gives me error that unrecognized usb device. I tried to reinstall XP but still the same.

  Can someone give my solution to this problem?.

  Hello

  You have yellow exclamation marks in Device Manager?
  I had a similar problem with the USB ports a few years ago. I removed the ports in Device Manager and reboot the laptop. The USB ports will recognize again.
  Furthermore, I reinstalled the latest chipset driver and everything worked well.

  The latest chipset driver download on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck! :)

• STP bluscreen error because of the device in Windows XP driver

  Originaltitle: white screen problem came with an error message. And the stop (blue screen) error caused by a device driver. I have not installed anything that either of the end someone can help please.
  I have not installed anything on the Pc quite a while so how can I know which driver is causing the problem. Thanks Edwin 866

  Hello

  We are pleased to know that the problem is solved. Please publish it on us in case you have questions more associated with Windows.

• How can I activate my card Miniport Tun Microsoft? Get the error code (10) the device can not be started.

  Microsoft Tun Miniport adapt #2 /.

  Microsoft Tun Miniport Adapter #2 / it is disabled (code 22) / this device cannot start (code 10).  I need help to activate the network adapter.

  Description: Broadcom 802. 11b / g wlan - Packet Scheduler Miniport

  Device ID: root | * tunmp \0001
  status 0 x 01802401 has problem
  0x0000000a problem (10)

  Hi GGisin,
   
  -Did you change on your computer before this problem?
   

  Follow the steps listed in the article below for the mentioned error code:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  Note: The information provided in this article are applicable to other versions of Windows XP as well.
   
  Additional reference on:
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• While in "Event Viewer-System", "an error was detected on device\Device\Harddisk2\D during a paging operation what is this error,"D"drive" is a dvd - rw drive empty on the front of our Tower? :

  We had the people that our PC reconstruction after an accident some time ago, say "it seems that the Windows swap file was somehow moved on the disk"D", and it should be on the main 'C' drive.  Microsoft sent us an email with instructions on how to reset the Windows paging on 'C' drive system and to reset the minimum and maximum space allowed for it.  We did it, but the ' warnings are still there. " The "D" drive is a drive of dvd - rw empy on the front of our Tower.  Most of the time it is empty, as it is now.

  What are they and how to fix it?  I'm 73 years old and still learning.    Grandpa

  Hello

  Check to see if that helps!

  http://www.techsupportforum.com/forums/F16/event-ID-51-nf68i-an-error-was-detected-on-device-device-Harddisk0-d-during-a-PAG-273585.html

  http://support.Microsoft.com/kb/244780/en-us

• Error: A parity error was detected on \Device\Ide\IdePort0 at system startup

  Original title: Windows XP error 11

  Event Viewer maintains with the following messages appears at the start of windows xp,

  The driver has detected an error of the Comptroller on \Device\Harddisk0\D.

  A parity error was detected on \Device\Ide\IdePort0.

  Hi plogmine,

  We recommend that you change the setting of firewall/security at different levels and then try to access files and folders on the network.

  See this article for more information: http://support.microsoft.com/kb/814112

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Critical error - no suitable graphics devices found

  Try to solve the problem of friends using TeamViewer, because they're 1000 miles :)

  He gets this message "Critical error - no suitable graphics devices found" on some of the games on Vista. I want to talk about Solitaire and Mahjong. InkBall works.

  Happened that recently so I suspected the Windows updates of the week passed and uninstalled them. No change.

  I uninstalled the graphics driver and had Windows download and reinstall. Same thing. I tried to download the latest drivers from Nvidia, but it fails on attempt (see http://img16.imageshack.us/img16/802...llerfailed.jpg).

  Because references to the problem of torque on the Interweb. Some have found using the system restore, but that came out under the name of each of them, I try I get a "system restore was not entirely successful," 'transient error', 0x800423f3.

  Someone suggested to remove and to reinstall .NET 1.1 which is a no go.

  Malwarebytes, Superantispyare and MSE are good.

  Thoughts?

  Hello

  This can help you to use the system restore to fix:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  2. try to use Safe Mode system restore.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Can't save changes made to the photos. Claims "error in Gallery blocks save ' how can I save the changes?

  When cropping or erase red-eye or auto adjust color, a box appears that says, error in Gallery blocking save.   Very frustrating...

  ==========================================
  Windows Photo Gallery... Cannot save modified photos...
  ==========================================

  No guarantee, but the news shows might offer some ideas.

  Proceed at your own risk *.

  Good luck...

  --

  (1) try to do a system restore to an hour before
  the problem started.

  With the help of the Windows Vista system restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  --

  (2) I've seen reports that this problem may be related
  Kodak Easy Share software. Installation "Kodak
  Single-action Version 8 for Windows from the
  the following link may be the solution.

  Kodak Easy Share 8 software version
  http://www.kodak.com/eknec/PageQuerier.jhtml?PQ-path=130&PQ-locale=en_US&_requestid=5320
  (FWIW, it's a good idea to create a system)
  restore point before installing software or updates)

  --

  (3) I saw reports that could clarify the next steps
  until the question...

  Right click the library icon and choose
  "Run as Administrator"

  --

  (4) I copied the info from a tech forum on
  the net... I don't know if it works, but maybe it's
  worth a try:

  A. right click on Task Manager open the
  taskbar on the bottom of your screen and choosing
  The task in the menu Manager.

  B. click the tab process, along the upper part of the
  The Task Manager screen.

  C. in the process tab, select the corresponding button at the bottom
  left of the screen that says "show processes of.
  all users"and click on it. Click 'Continue' to the UAC
  the prompt that appears.

  D. the screen should turns off a moment, then
  back with much more than process listed. Click
  the "Command line" column to sort the list and
  Search:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  F. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  You should now be able to save your changes to
  your photos normally. The bad news is that this
  should be performed whenever you start or restart Vista.
  And I don't know how to prevent the situation from
  in the first place of loading.

  --

  5) posted by: artologik
  The solution came to me when I could not recreate
  the problem on a laptop with Vista Home.
  Everything I could compare, I noticed that the
  %Path% environment variable was not between different
  the 2 machines.

  I guess that WLPG relies on the dll must be found
  on the way to the system; When not found, it must return
  Back to ' base or incomplete "library finds it
  the default specific paths or the user. The solution for
  me has been to ensure the entire path system
  to the folders in the order appropriate.

  To fix, follow these steps:

  A. right click on the COMPUTER icon on the
  desktop and choose PROPERTIES

  B. choose ADVANCED SYSTEM SETTINGS

  C. Si you are prompted by UAC to allow, go ahead.
  and ALLOW

  D. click on ENVIRONMENT VARIABLES...

  E. in the bottom half, under SYSTEM VARIABLES,.
  Find the PATH variable and highlight the

  F. click the button CHANGE

  G. ensure that what starts with
  % SystemRoot%\system32;%SystemRoot%;

  H. ensure you that a semicolon separates each entry.

  I. click OK three times

  J. restart the computer

  Good luck...

• Windows Vista Home Premiun auto restoration and backup; Save the error code: i/o device error (0x8007045D), file backup complete normar will not complete successfully.

  Device error Code: i/o Device (08007045D) error Code... trying to make a backup of normal file that goes all the way and then produces this error code.

  Hey Rodney,
   
  To resolve this issue, follow these steps:
  1. Click Start, type cmd in the start search box, right-click cmd.exe in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  2. at a command prompt, type the following command and press ENTER: Chkdsk/r X:
  Note: In this command, x is a placeholder that represents the drive letter of the volume you want to check.
  3. press y when you are prompted to check the drive the next time the system restarts.
  4. close all applications and restart the computer.
  Note: When you restart, Windows checks the drive for errors, and then Windows starts.
  5. after the computer restarts, repeat steps 1 through 4 for the other volume and try the backup operation again.
   
  For more information, see this article: http://support.microsoft.com/kb/952272
   
  I hope this helps.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.