error after login: re - install hpzjrdo1.dll...

Similar Questions

• an error after you have installed and configured fmw 11g

  I have installed:
  
  JDK 1.6.0_30 x 64
  WebLogic 10.3.4 generic
  Forms and reports 11.1.1.2 > > patch set 11.1.1.4
  
  on
  Windows server 2008 standard sp2 x 64
  6 GB OF RAM
  
  installed as services, my app works ok (it seems to be ok), but
  -l'url http://domain:port / em does not.
  -also if I try to add a new report server it gives me this error:
  
  F:\Ora\FMW\asinst_2\bin\opmnctl createcomponent - adminUsername weblogic - adminHost mamchinename.domein.com adminPort - 7001 - oracleHome F:\Ora\FMW\as_1 oracleInstance - F:\Ora\FMW\asinst_2 - asinst_2 - NomComposant RptSvr_2 - ReportsServerComponent componentType instanceName
  * Command failed: could not find the register MBean. Check NonJ2EEManagement Appl
  ication was deployed.
  Details are saved in F:\Ora\FMW\asinst_2\diagnostics\logs\OPMN\opmn\provision.log*
  CreateComponent opmnctl: failed.
  
  
  Therefore, commissioning log says:
  
  05/11/2012-17:34:19 oracle.as.config.provisioner.InstallerCmdLine logInitialCommand
  INFO: Beginning of the command: [createcomponent, weblogic, - adminHost, MachineName.domain.com, - adminUsername, - adminPort, 7001 -, oracleHome, F:\Ora\FMW\as_1, - oracleInstance, F:\Ora\FMW\asinst_2, instanceName-, asinst_2 - componentName, RptSvr_2 -, componentType, ReportsServerComponent]
  05/11/2012-17:34:31 oracle.as.config.provisioner.InstallerCmdLine handleRunFailure
  GRAVE: Command failed:
  oracle.as.config.ProvisionException: cannot find the register MBean. Check nonj2eemanagement Application has been deployed.
  at oracle.as.config.impl.RuntimeServiceConnection.getAttribute(RuntimeServiceConnection.java:596)
  at oracle.as.config.impl.RuntimeServiceConnection.locateRegisteredInstanceName(RuntimeServiceConnection.java:764)
  at oracle.as.config.impl.OracleASComponentBaseImpl.validateNotExistOnAdminServer(OracleASComponentBaseImpl.java:510)
  at oracle.as.config.impl.OracleASComponentBaseImpl.create(OracleASComponentBaseImpl.java:102)
  at oracle.as.config.provisioner.commands.CreateComponentCommand.execute(CreateComponentCommand.java:31)
  at oracle.as.config.provisioner.InstallerCmdLine.run(InstallerCmdLine.java:146)
  at oracle.as.config.provisioner.InstallerCmdLine.main(InstallerCmdLine.java:46)
  Caused by: javax.management.InstanceNotFoundException: oracle.as.management.mbeans.register:type = register
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1094)
  at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:662)
  at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
  to weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$ 12.run(WLSMBeanServerInterceptorBase.java:326)
  at java.security.AccessController.doPrivileged (Native Method)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
  at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:157)
  to weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$ 12.run(WLSMBeanServerInterceptorBase.java:326)
  at java.security.AccessController.doPrivileged (Native Method)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
  at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
  at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
  at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$ $5 1.run(JMXConnectorSubjectForwarder.java:326)
  at java.security.AccessController.doPrivileged (Native Method)
  to weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$ 5.run(JMXConnectorSubjectForwarder.java:324)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
  at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1404)
  at $200 (RMIConnectionImpl.java:72) javax.management.remote.rmi.RMIConnectionImpl.access
  to javax.management.remote.rmi.RMIConnectionImpl$ PrivilegedOperation.run (RMIConnectionImpl.java:1265)
  at java.security.AccessController.doPrivileged (Native Method)
  at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
  at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
  at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke (unknown Source)
  at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
  to weblogic.rmi.internal.BasicServerRef$ 1.run(BasicServerRef.java:522)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
  at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
  at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  
  
  
  
  another newspaper, that I see after a fresh reboot is the stdout.txt
  
  
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >
  < 11 - may - 2012 17H 12' CLT > < WARNING > < Munger > < BEA-2156203 > < a version attribute was not found in the application element in the F:\Ora\FMW\as_1\forms\j2ee\formsapp.ear/META-INF/application.xml deployment descriptor. A version attribute is required, but this version of the Weblogic Server will assume that the JEE5 is used. Future versions of the Weblogic Server will reject the descriptors that do not specify the JEE version. >
  < 11 - may - 2012 17H 12' < 11 - may - 2012 17H 12' CLT > < error > < oracle.as.config.persistence.jaxb.JAXBXmlPersistenceManagerImpl > < J2EE JMX-47001 > < Se ha produced a JAXB durante anulacion Escalin migrant to data error. >
  < 11 - may - 2012 17H 12' CLT > < error > < default > < J2EE JMX-46030 > < el Registrar al fallo MBean "oracle.reportsApp.config:name = rwserver, type = ReportsApp, Application reports, ApplicationVersion = = 11.1.1.2.0" durante the Gilt of the application.
  oracle.as.config.persistence.exceptions.ConfigException: Se ha produced a JAXB durante anulacion Escalin migrant to data error.
  at oracle.as.config.persistence.jaxb.JAXBXmlPersistenceManagerImpl.load(JAXBXmlPersistenceManagerImpl.java:204)
  at oracle.as.jmx.framework.util.DefaultConfigObjectMBeanAssociationInfo.loadConfigObject(DefaultConfigObjectMBeanAssociationInfo.java:722)
  at oracle.as.jmx.framework.util.DefaultConfigObjectMBeanAssociationInfo.initializeConfigObjectAndAssociatedMBean(DefaultConfigObjectMBeanAssociationInfo.java:731)
  at oracle.as.jmx.framework.util.ServletContextListenerSupport.contextInitialized(ServletContextListenerSupport.java:154)
  at oracle.reports.admin.runtime.lifecycle.WebApplicationLifeCycleCallBack.contextInitialized(WebApplicationLifeCycleCallBack.java:66)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nex < 11 - may - 2012 17H 12' CLT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
  < 11 - may - 2012 17H 12' CLT > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >
  < 11 - may - 2012 17H 12' CLT > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with the other members of cluster_forms running. >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
  < 11 - may - 2012 17H 12' CLT > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >
  < 11 - may - 2012 17H 12' CLT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 192.168.8.200:9001 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000330 > < started WebLogic Server managed by "WLS_FORMS" for the domain "ClassicDomain" running in Production Mode >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  employment. Java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: javax.xml.bind.UnmarshalException
  -with the exception related:
  [org.xml.sax.SAXParseException: element type "property" must end with the corresponding end tag ' < / property > ".]
  at javax.xml.bind.helpers.AbstractUnmarshallerImpl.createUnmarshalException(AbstractUnmarshallerImpl.java:315)
  at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.createUnmarshalException(UnmarshallerImpl.java:514)
  at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:215)
  at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:184)
  at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
  at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:184)
  at oracle.as.config.persistence.jaxb.JAXBXmlPersistenceManagerImpl.load(JAXBXmlPersistenceManagerImpl.java:160)
  at oracle.as.jmx.framework.util.DefaultConfigObjectMBeanAssociationInfo.loadConfigObject(DefaultConfigObjectMBeanAssociationInfo.java:722)
  at oracle.as.jmx.framework.util.DefaultConfigObjectMBeanAssociationInfo.initializeConfigObjectAndAssociatedMBean(DefaultConfigObjectMBeanAssociationInfo.java:731)
  at oracle.as.jmx.framework.util.ServletContextListenerSupport.contextInitialized(ServletContextListenerSupport.java:154)
  at oracle.reports.admin.runtime.lifecycle.WebApplicationLifeCycleCallBack.contextInitialized(WebApplicationLifeCycleCallBack.java:66)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:636)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  Caused by: org.xml.sax.SAXParseException: element type "property" must end with the corresponding end tag ' < / property >.
  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.createSAXParseException(ErrorHandlerWrapper.java:195)
  at com.sun.org.apache.xerces.internal.util.ErrorHandlerWrapper.fatalError(ErrorHandlerWrapper.java:174)
  at com.sun.org.apache.xerces.internal.impl.XMLErrorReporter.reportError(XMLErrorReporter.java:388)
  at com.sun.org.apache.xerces.internal.impl.XMLScanner.reportFatalError(XMLScanner.java:1414)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanEndElement(XMLDocumentFragmentScannerImpl.java:1749)
  to com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl$ FragmentContentDriver.next (XMLDocumentFragmentScannerImpl.java:2939)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentScannerImpl.next(XMLDocumentScannerImpl.java:648)
  at com.sun.org.apache.xerces.internal.impl.XMLNSDocumentScannerImpl.next(XMLNSDocumentScannerImpl.java:140)
  at com.sun.org.apache.xerces.internal.impl.XMLDocumentFragmentScannerImpl.scanDocument(XMLDocumentFragmentScannerImpl.java:511)
  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:808)
  at com.sun.org.apache.xerces.internal.parsers.XML11Configuration.parse(XML11Configuration.java:737)
  at com.sun.org.apache.xerces.internal.parsers.XMLParser.parse(XMLParser.java:119)
  at com.sun.org.apache.xerces.internal.parsers.AbstractSAXParser.parse(AbstractSAXParser.java:1205)
  to com.sun.org.apache.xerces.internal.jaxp.SAXParserImpl$ JAXPSAXParser.parse (SAXParserImpl.java:522)
  at weblogic.xml.jaxp.WebLogicXMLReader.parse(WebLogicXMLReader.java:133)
  at weblogic.xml.jaxp.RegistryXMLReader.parse(RegistryXMLReader.java:173)
  at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal0(UnmarshallerImpl.java:211)
  at com.sun.xml.bind.v2.runtime.unmarshaller.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:184)
  at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:137)
  at javax.xml.bind.helpers.AbstractUnmarshallerImpl.unmarshal(AbstractUnmarshallerImpl.java:184)
  at oracle.as.config.persistence.jaxb.JAXBXmlPersistenceManagerImpl.load(JAXBXmlPersistenceManagerImpl.java:160)
  at oracle.as.jmx.framework.util.DefaultConfigObjectMBeanAssociationInfo.loadConfigObject(DefaultConfigObjectMBeanAssociationInfo.java:722)
  at oracle.as.jmx.framework.util.DefaultConfigObjectMBeanAssociationInfo.initializeConfigObjectAndAssociatedMBean(DefaultConfigObjectMBeanAssociationInfo.java:731)
  at oracle.as.jmx.framework.util.ServletContextListenerSupport.contextInitialized(ServletContextListenerSupport.java:154)
  at oracle.reports.admin.runtime.lifecycle.WebApplicationLifeCycleCallBack.contextInitialized(WebApplicationLifeCycleCallBack.java:66)
  to weblogic.servlet.internal.EventsManager$ FireContextListenerAction.run (EventsManager.java:481)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
  at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
  at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
  at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
  at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
  at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
  to weblogic.application.internal.flow.ModuleStateDriver$ 3.next(ModuleStateDriver.java:425)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
  at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
  to weblogic.application.internal.BaseDeployment$ 2.next(BaseDeployment.java:636)
  at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
  at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
  at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
  at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
  at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
  at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
  to weblogic.management.deploy.internal.DeploymentAdapter$ 1.doActivate(DeploymentAdapter.java:51)
  at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
  to weblogic.management.deploy.internal.AppTransition$ 2.transitionApp(AppTransition.java:30)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:261)
  at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:246)
  at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
  at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
  at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
  at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  >
  Registration of specific MBeans of Application
  
  MBEAN: ORACLE. REPORTS: NAME = REPORTS, TYPE = REPORTSRUNTIMEMBEAN, APPLICATION REPORTS, APPLICATIONVERSION = = REGISTERED 11.1.1.2.0
  
  
  MBEAN: ORACLE. REPORTS: NAME = OIDASSOCIATION, TYPE = REPORTSRUNTIMEMBEAN, APPLICATION REPORTS, APPLICATIONVERSION = = REGISTERED 11.1.1.2.0
  
  
  MBEAN: EMDomain:Name = EMTargetType = oracle_repapp, type = EMIntegration, Application reports, ApplicationVersion = reports = RECOMMENDED 11.1.1.2.0
  
  
  < 11 - may - 2012 17H 12' CLT > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
  < 11 - may - 2012 17H 12' CLT > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >
  < 11 - may - 2012 17H 12' CLT > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with the other members of cluster_reports running. >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >
  < 11 - may - 2012 17H 12' CLT > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >
  < 11 - may - 2012 17H 12' CLT > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 192.168.8.200:9002 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000330 > < started WebLogic Server managed by "WLS_REPORTS" for the domain "ClassicDomain" running in Production Mode >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed in the RACE >
  < 11 - may - 2012 17H 12' CLT > < opinion > < WebLogicServer > < BEA-000360 > < server started operation >
  
  
  
  Help me please.

  you need to try to extend your domain name and the em to the server admin application. Please follow the below step and let me know if you face any difficultiues
  (1) stop your admin/ms servers in the domain
  (2) call ($ORACLE_HOME/common/bin/config.cmd or config.sh) configuration wizard
  (3) choose the option Extend area. Select your domain
  (4) select model of Enterprise Manager
  (5) to complete the wizard and the application of the em to target server admin
  (6) start your server
  (7) now, you will be able to access the MS, by using a URL of type http://localhost:7001 / em.

• After you have installed the latest version of iTunes, get the error message about AVFoundationCF.dll at startup to the top

  I've been downloding the new version of itunes and my computer froze and I stopped him by holding button turn off and when I go on the computer the next time he says this "C:\Program Files\Apple\Apple Support\AVFoundationCF.dll of the application also does not Tun on Windowns or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  * original title - help me please: (*)

  Hello

  ·                         Follow the information from apple to the link below

  read this information on avfoundationcf.dll

  http://discussions.Apple.com/message.jspa?MessageID=12932050#12932050

  Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  http://support.Apple.com/kb/HT1923

  and or ask for their support of itunes

  http://www.Apple.com/support/iTunes/

  and also try itunes discussions

  http://discussions.Apple.com/category.jspa?categoryID=149

• Error message: windows\system32\difxapi32.dll isn't is either not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for

  Hello

  I keep getting error messages when I use the computer. It started two days after you download an update from Windows. A sample of the error is:

  C:\windows\system32\difxapi32.dll is not designed to run on windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support.

  I use a vista. I don't know how to solve this problem, many want to help.

  Thank you.

  Hi Colinthebrave:

  Start with this little tool to help get rid of the error, once your system is stable again and then try to run your updates again.

  Thank you for your message; Let us know how it goes.

  o

  o The System Restore tool

  If the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time. The tool using System Restore may not necessarily help you determine the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose another restore point and then click Next.

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  4. click on finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Don
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• 0xc000012f error status keeps popping up after update? (system32\uxtheme.dll)

  The 0xc000012f error keeps popping up on my hp Windows 8 pc after that I downloaded the necessary updates. But I was not updated to Windows 8.1. The same window keeps popping up after I try to leave the window with regard to system32\uxtheme.dll, but for all the different programs. For example: Skype.exe - Bad Image C:\Windows\system32\uxtheme.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the provider of software for support. 0xc000012f error status. There are countless windows popping up after that I tried to shut it down. In addition, it won't let me run all downloaded programs he says there is an error with. I can't uninstall KB2879017 update because I don't have it. Help, please!

  I was helping someone with this earlier today and uninstall the kb2936068 update fixed it.

  I actually called Microsoft and also read this thread.  A single update of IE seems to cause this and their solution is to refresh the windows.

  I wish that they investigate why this happens and patching rather than just people reinstalling Windows.

• My iPod nano 2nd generation gets disk errors after installing iTunes?

  I use my iPod nano 2nd generation for... Wow little almost 10 years now and of course is not as sensitive, a little laggy sometimes, battery life isn't as good but still never had real problems with it that can be repaired by a reset. Well not until now and I have not really money to spend to get a new, in particular the fact that practically it still works fine on his own, just that I can not add or remove pieces of her more.

  The problem

  It seems that the computer has trouble reading the device. Whenever I plug my iPod nano 2nd generation USB in my laptop (Windows 10), which has some sort of interaction with it freezes. For the moment I plug in, programs such as Winamp, iTunes, File Explorer (if I click my computer-> try to right click on the drive, that says all F: drive instead of the usual name recognized as "My iPod."), the Device Manager when I try to turn Apple iPod USB Driver and the small icon in the system tray when you try to eject the drop-down list no longer appears, all these programs themselves just freeze and unresponsive until I unplug the device. In Event Viewer, the moment where I plug it, it gets spammed by looping errors to:

  Error: The device, \Device\Harddisk1\DR21, has a bad block.

  ATTENTION: An error was detected on device \Device\Harddisk1\DR21 during a paging operation.

  So, basically, it seems that the computer is blocked just not try to read and recognize the device, which means that I can't really do anything with it. The iPod itself seems to work fine, I can hear songs, recharge the battery and other things, earlier I can't add or remove pieces of her.

  Stuff leading up to it

  A year or two before, I used to manage the ipod via itunes (a relatively old version of time too I guess since I almost never update) until I formatted my laptop some time ago and never bored computer reinstall itunes. Since then, I really didn't need to change anything to my iPod and just use Winamp (my default music player) to the add/remove songs when I needed to. Today, I decided to install iTunes because there are some things that winamp cannot do as add embedded lyrics and also winamp blurs the sorted list of the song. Since then, after you have installed the new iTunes, start freezing and program I get the problems described above. There might be a chance that iTunes was not the real culprit and the disc was already beginning to get corrupted or something somehow, but I can't think of anything that's happened before this problem started.

  I tried many things

  • Uninstalled iTunes and all the other stuff related to the installation as pie, Apple Mobile Device Support... .etc
  • Reinstall the device driver USB Apple iPod. When I turn it off (Plug in iPod-> iPod poster 'do not disconnect'-->--> Device Manager driver right click-> disable-> Device Manager freezes up-> unplug ipod-> Device Manager-> thaws plug ipod in) ipod becomes simply the State of charge. Steps to reinstall is the same (need to plug and unplug).
  • Reset iPod in now the Center button + menu button.
  • Will then resetting operation rewind + Centre button iPod diagnostic mode. It is not a test disc hard because I guess nano doesn't have a disc hard just flash ram. Anyway, when I select SDRAM QScan he only says: "SDRAM OK." NAND_SPEC gives "NandLBA = 1982464". Flash gives Checksum "Checksum is 0x26AF".
  • Wanted to try as described here to check for disk errors, but cannot because the computer cannot correctly recognize and explore freezes if I right click. I tried using 'chkdsk f:' in the command prompt, but that seems to hang as well.
  • Switches mode disc reset ipod then now Center + play button. Then connect the laptop... etc, same problem.

  It's a pretty old device, so it seems that support because it is very rare. I didn't install iTunes could screw up the device that it is intended to support and do anything as permanent as this one.

  You must exclude a faulty USB, cable anchorage, try another, or using your power with another Apple device cable, to confirm that it works correctly.

  Otherwise, your troubleshooting seems complete.  If that's what you've done for disc Mode

  How to put your iPod in disc - Apple Support mode

  and connection to your computer causes this issue General 'freeze' with multiple processes, the iPod has possibly a hardware problem.  Flash storage eventually.  Or it can be a problem on the logic board of the iPod.

  I suggest try to reformat the iPod using Windows, as if it were a USB flash drive.  But you can only do if the system hangs when you connect iPod.

  NOTE: If you find a way to reformat iPod using Windows, use FAT32 as the disc format.  If there is an option to do a quick format, do a full format instead.  Once the process is complete, the iPod is totally blank.  You do restore using iTunes (if you are prompted or not), to the embedded iPod software.

• R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista

  R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
  This message is pop:
  Microsoft Visual C++ Runtime library
  Runtime error!
  Program c:\windows\helppane.exe
  R6034
  A request made an attempt to load the wrong C runtime library
  Please contact the support team of the application for more details
  This message appears as soon as the machine restarts
  Happens if I try to run Skype
  There is no problems until the updates have been installed
  This problem is urgent that this computer is used for a company
  Thank you
  David Schlachter

  Hello

  In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.

  Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=en

  Microsoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=en

  Then uninstall and reinstall the software Skype and check.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 0x8024400A verifying updates after a clean install

  Original title:

  I had to reinstall Windows XP after a crash. When you try to check the status of the update to my laptop using the expedited procedure, I get the 0x8024400A error message.

  Hello

  Try the following and see if it helps.

  Method 1:

  Run the fixit available at the following link.

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Check out the following link.

  Windows Update, on new installation 0x8024400A error

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a

• Cannot install Intellimouse on XP, I got an error message: error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  Original title: cannot install Intellimouse on XP

  Hello

  I have mouse Intellimouse optical 1.1, I want to customize sound buttons.

  Recently, I tried to install its driver on laptop T410, installed with XP 32 bit operating system. Unfortunately, I got an error message:

  Error loading % ProgramFiles%\SynAptics\SynTP\SynISDN.dll. The specified module could not be found.

  What is the problem?

  Thank you

  Uriel

  Hello

  Please try this and report results:

  1. Click Start, point to settingsand then click Control Panel.
  2. Double-click System, click the hardware tab and then click Device Manager.
  3. Double-click mice and other pointing devices branch to expand it.
  4. Right-click the IntelliMouse pointing device, and then click Properties.

     The IntelliMouse pointing device should be listed as follows:

     Microsoft USB IntelliMouse explore (IntelliPoint)
  5. Click to update the driver.
  6. Click Next in the Wizard update device driver dialog box.
  7. Click display a list of drivers that are known... , and then click Next.
  8. Select the Microsoft mouse driver that ends with (IntelliPoint), and then click Next.
  9. Click Next to confirm that you have selected the right driver.
  10. Click Finish to complete the installation of the new driver

• STOP STOP 0x0000008e error error messages appear after trying to install Windows XP on the new drive

  Original title: Stop error 0x0000008e error displayed after trying to install Windows XP on the new drive

  STOP 0x0000008e error. Also setupdd.sys - address F740DFEA base at F73EC000, Datestamp41107c8f. After trying to install Windows XP on a new hard drive. Never been in the BIOS. A bit afraid to change much, but it is said that the caching and shadowing should be turned off and boot into Safe Mode, but I cannot get Safe Mode because there is no OS on the drive. Also, he wants to know if I want to install Windows XP to a partition on the disk. I looked at other readers, and there is a partition, so I think I should. Any information would be appreciated. "Just an old fart."

  Hello

  See the following article: error message "STOP 0x0000008e" during the installation of Windows XP

• Error after fresh install Windows XP Pro Service Pack 3: you may be unable to access the Windows Update site... If these versions of Windows are not updated with the latest Service Pack

  I tried that at this link:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/error-after-fresh-install-of-Windows-XP-Pro/a617bb44-9944-4338-b82e-c18372ad986f?page=4&TM=1313954410562

  In particular, I tried everything (except #7-la destruction - because I just destroyed yesterday... LOL)

  1 reset
  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144
  3 run the difficulty of method 2 here: http://support.microsoft.com/kb/943144
  4 run the difficulty from here: http://support.microsoft.com/kb/971058
  5 reset
  6 try Windows Update
  7 if it does not, repeat steps 1-6 before using your preferred method of destruction of the computer.

  I have a completely fresh installation. I reformatted yesterday installed the operating system, which comes with 3 SP.

  I used the Dell site to get the rest of my drivers and then began the process of trying to update. Immediately, I got the error above.

  According to that link above, 'FinnGange @ & anyone else having a similar problem: to avoid confusion, please start your own, new thread on YOUR specific problem and your computer. " Indicate your current version of IE, and the full version of Windows.

  So, here is my new thread! :)

  I am running XP Pro 2002 SP3 and IE8

  Please help me with this problem.

  Thank you

  Kris

  2 Run Installer Windows Update Agent method 1 here: http://support.microsoft.com/kb/943144

  If you go to that page and made scroll to Method1, you will see there are three installers. Which did you use?

  Also, what is the make, model and model number of your PC? Is your Windows XP 32-bit or 64-bit?

  Did reboot you after you run the Update Agent Installer?

  Dump you all your IE8 temporary Internet files and cookies?

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have installed the Realtek drivers, I get code 10 error and cannot start sound.

  original title: help with my sound please

  After you have installed the realtek driver it says code error 10 can't start sound...

  also I can't find the button sound.video and games on the Device Manager heres the message in Event Viewer:

  Log name: System

  Source: PlugPlayManager

  Date: 17/05/2012-18:50:27

  Event ID: 12

  Task category: no

  Level: error

  Keywords: Classic

  User: n/a

  : My computer

  Description:

  The device ' in Build Conexant Type 2 modem "(HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102) disappeared from the system without first be prepared for removal.

  The event XML:

   

     

      12

      2

      0

      0 x 80000000000000

     

      435

      System

      badimo-PC

     

   

   

      Modem Conexant - in the generation Type 2

      HDAUDIO\FUNC_02 & VEN_14F1 & DEV_2C06 & SUBSYS_10250126 & REV_1000\4 & 37d33e44 & 0 & 0102

      00000000

   

  Hello I want to,

  The problem you describe looks like you are maybe install the wrong driver for your sound card.
  Have you checked that the driver is for your specific device?
  If you look in your system's Device Manager, is there a yellow exclamation next to the audio controller?
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager
  If so, this seems to indicate that the drivers installed are not good for your sound card. Usually if you double-click the device in Device Manager, it will say something in the sense of "Device cannot start".
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• After trying to install updates error 80070643 # appears

  Continue to receive the error code 80070643 # after attempting to install updates. Update for microsoft Net Framework 4. Have tried several times to update with

  without success.

  Windows Update error 80070643 http://windowshelp.microsoft.com/Windows/en-US/Help/e5304fc1-9264-4d97-9c35-3c3ad167e1701033.mspx>

  UTC/GMT is 16:48 Thursday, September 1, 2011

• Error: _ "Sidebar.exe - bad image"__windows/system32/sfc.dll is not designed to run on windows or it contains and error. " Try to install the program by using the original installation media or contact your system administrator. __

  Help, please!
  I started my computer today and it came with this error:

  "sidebar.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click on OK, then he said:

  "Acrotray.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  I click OK and then it says:

  "hpqtra08.exe - incorrect image.
  Windows/System32/SFC.dll is not designed to run on windows or it contains and error. Try to install the program by using the original installation media or contact your system administrator.

  Also I got an error report saying that windows sidebar stopped working.

  My computer is VERY slow in all the commands I give.
  I also tried to run the sfc (System File Checker command) and acts like he is going to run the program, but then just closed.

  Do you have an idea what is happening with my computer and what I can do to fix this?

  Thank you very much!

  Hi deacon829,

  You did changes to the computer before that happened?

  Step 1: Start the computer in safe mode and check if the problem persists, to do this, follow the steps below,

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. In the advanced startup options select safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Step 2: If you try to install any application before this program, try to uninstall them.

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

  If this solves the problem, you can deduct that the demand is probably corrupted, damaged or incompatible. You can check with the manufacturer of the program for more information.

  Step 3: System Restore: System Restore to put the computer's system files to an earlier point in time.

  Look for steps to restore of the system in the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  If the problem persists,

  Step 4: A scanner online for any threat and try to correct

  http://OneCare.live.com/site/en-us/Center/cleanup.htm

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.