Error: "an authentication error has occurred. The security package does not exist", while trying to office remotely on Windows 7

Similar Questions

• Windows Defender error [0 * 80070424 - the specified service does not exist as an installed service.

  Hi, I have problems with my Security Center, I can't put it, I get an error indicating that the SECURITY CENTER can NOT BE STARTED! And everytime I open Windows Defender, I get this error "Windows Defender encountered an error 0 * 80070424.The indicated there is no service as an installed service.»

  What it means? I tried to update the windows Defender, but the update process has been abandoned because windows has detected that the windows Defender has been pre loaded with VISTA

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually activate new Windows (do not take into account information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware.

  I suggest that you now download, install, update and scan with it to check the malware

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Group Policy infrastructure failed due to the error below. The specified domain does not exist or could not be contacted.

  using several Windows 2003 domain in an attempt to push the msi using Group Policy is following on xp sp3 machine error

  Group Policy infrastructure failed due to the error below.
  The specified domain does not exist or could not be contacted.

  Note: Due to the GP Core failure, no other component processes Group Policy policy.  Consequently, status information for the other components are not available.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• "Error running query: the real member does not exist in the application.

  Hi all

  I have a HFM EN users need to run, but somehow they started getting this error "error running query: real member does not exist in the application". I traced their levels of access to mine, and I am able to run the same report without any problem but the user still getting the same error. what may be the possible cause. Please help me so that I can ensure the debugging.

  Thank you

  Zitouni

  I was able to solve this problem by checking the user of security principals class was trying to run the report for. The user did not have acesss on the class of the said security and change all, solve the problem.

  Thanks, Sattu

• Impossible to share file error: the specified service does not exist as an installed service

  Original title: Impossible to share a folder in Vista

  I have Vista Home Basic 2007 with service pack 1. My software provider tries to share a file on the network and is unable to do so and has no solution. The error message is something like "not several points endpoint available.»

  Also in the network and sharing Center I am unable to turn on network discovery, turn on file sharing, enable printer sharing. The error message is: "the specified service does not exist as an installed service."

  What is the solution? Advisor. Thank you

  Hello MC2882,

  Please see the following article for more information on the replacement of Microsoft software, or contact the manufacturer of your computer:
  http://support.Microsoft.com/kb/326246

• C7280 Installation error: the specified service does not exist as an installed service

  All,

  I have an AIO C7280 printer that is connected wireless to my router.  I have a pc (Vista) cable and a laptop wireless (XP) connected to the router as well.  I have no impression of question from the pc.  However, when I try to install the driver on the laptop I get an error just after that he asked me if it's a USB drive or a network printer.  I chose the network and the error appears saying "the specified service does not exist as an installed service.  I ping the printer from the laptop so I know it can 'see '.  I don't know what to do.  I have uninstalled/reinstalled several times without success.  Can anyone help?

  Thank you.

  Edit for more information:

  After building a log of installation failure and 'details', that's what I see:

  Error Situation code: 20364041

  Now Launching = X:\hpzdui01.exe - gateoncmdline easyinstall | XXX f X:\hpoins21.dat-valider No.

  LaunchNetworkInstall retrieves the value unexpected 1060

  RUN: 50 return stops Driver UI plugin

  Exit code = 50

  Message edited by gatorman on 09/18/2009 16:57
  Message edited by gatorman on 09/18/2009 17:10

  The service that the error message refers is the HP network devices support service. Try this...

  Open the contents of the installation CD, and then open the file "setup." Now you will find either a folder named 'netdevicemanager' or simply 'network '. Open if it is present. Now there should be a file with the same name as the file, but with extension .msi. Right-click on this file and click on uninstall. If you get a message stating that the action applies only to products that have been installed, and then click OK. Restart the computer IF necessary. Now, right-click on the file and click on install. Installation do not normally present a window of 'success' You will just see a bar of progress for a few seconds and disappear. Once this happens, restart the PC and check if the HP Network Device Support or similar service appeared in the list of services. If Yes, then reinstall the software, and it should install correctly.

• When I try to change the permissions on the folders, I see the error "an error has occurred applying security information to: < \\folder > access denied»

  Original title: APPLICATION SECURITY ERROR

  I recently changed my security permissions for a public folder to full control.  However, when I try to change the permissions of return, you receive an error "an error has occurred applying security information to: <\\folder>access is denied."  I then click on continue and I receive «Cannot save changes to authorization on <\\folder>access denied»  What waste? and how can I solve this problem?

  Hello Craig powers,.

  For that matter, please submit this question to the forum below for Home Server.

  Home Server:

  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/

• "An error has occurred applying security information to:...". The system cannot find the specified file. »

  So, this is what happened:

  I accidentally threw my wife laptop screen and I bought her a new. The laptop seems to be OK, but I couldn't see anything because of the broken screen.
  I bought a pen, took out the old HDD (Vista) and connect it to the speaker.
  Now I'm going through old files from my wife from the old HDD (Vista) on his new laptop (Win 7), but I can't access it.
  So I did a little web browsing and tried the following.
  Logged as administrator, open properties, Security tab, advanced, button tab owner, edit, changed ownership to myself (my wife) and verified replace the owner in the box of submarines.
  And then find a lot of mistakes. Everyone says ' an error has occurred applying security information to:
  Among these errors, half of 'em had "the system cannot find the file specified" and the other half had "access denied."
  In the end, there is a separate error that says: "unable to set new owner (folder). The system cannot find the specified file. »
  I would really appreciate the help.

  Hello

  Did you change your computer?

  I suggest that you first take ownership of the drive once you connect to the computer and check if it works.

  To take ownership of a folder

  (a) right click on the folder you want to take control and then click Properties.

  (b) click on the Security tab, click Advanced, and then click the owner tab.

  (c) click on edit. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) click on the name of the person you want to give to the property.

  (e) If you want that person to be the owner of the files and subfolders in this folder, select the check box replace the owner of sub containers and objects .

  (f) click OK.

  I suggest you follow the links and check out them.

  Troubleshoot "access denied" when opening files or folders

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-access-denied-when-opening-files-or-folders

  Error message when you change the security settings for a folder that contains a child object for which you have no access authorization: 'access denied '.

  http://support.Microsoft.com/kb/975702

• An error has occurred applying security information to: E:\randomfilename access is denied.

  I plugged my hard drive to my lap top and when I tried to delete or move files access denied because I do not have a correct security. Well when I tried to change the security that arises > an error has occurred applying security information to: E:\randomfilename access is denied. and that don't fade! I tried to turn on the Admin account and then to change it but I couldn't always do.

  I had the same problem, this is what worked for me:

  My mistake: trying to deny access to all users a part of administrators I had checked the box 'Users' and barred all access.
  But I foud out that Serge was the administrator, I'm also considered to be a "user", so even if the administrator has full rights, if it is also on the list of users he's used to be able to access anything whatsoever.
  A similar error is possible by checking "Everyone" when you set rights.
  Solution: go to your folder properties and allow free access to "Everyone" and "users". I hope it helps.
  See you soon!

• How to solve error 1075 the dependency service does not exist or has been marked as deleted by sharing my internet conection as temporary ad - hoc wifi connection? Windows 7

  For 6 months I have been successfully using my based ad hoc temporary internet connection wifi connection to aid Assistant ICS (internet connection sharing) on my computer laptop windows7, but last night my microsoft security essential antivrus detected and removed Trojan win64 sirefef. "" B and after that, I have this error 1075 "the dependency service does not exist or has been marked as deleted" whenever I tried to make the new ad - hoc wifi based connection to share my main internet connection for my other devices

  I was looking for a response, and since I met the same sirefef of virus variants. (x), after the removal of virus, that I remembered the place, that he has done.

  C:\WINDOWS\Microsoft.NET\assembly\GAC_MSIL

  As a solution, I think that if a system component is damaged I shuould fix first.

  In fact, I did a full upgrade to Windows 7 (build even) with the OS DVD.

  I must mention about the extraordinary capabilities of Windows 7 on the upgrade.

  After all the upgrade process which took about 2 hours to "Installation of Windows 7" discovered that .NET framework 4.0 is damaged and repaired. And I could start ICS.

  Without all this hassle if you could try to reinstall .net Framework 4.0, I think that this problem will disappear.

• Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.

  Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:

  Windows could not start the IKE and Authip IPsec keying service modules on the local computer.  Error 1075 the dependency service does not exist or has been marked for deletion.

  original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion

  Hello

  Remember to make changes to the computer before the show?

  You can follow the below methods:

  Method 1: Restart Windows and try to start the Security Center service.

  If you still receive the same error, make sure that the WMI service is launched and running:

  (a) click Start, run , and then type Services.msc

  (b) double-click Windows Management Instrumentation

  (c) set its startup type to Automatic

  (d) click Start to start the service, and then click OK

  (e) restart Windows.

  Method 2: Restart the service

  Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.

  To restart the IKE and AuthIP IPsec Keying Modules service:

  To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.

  (a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:

  ·         Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.

  ·         Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.

  (b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.

  (c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.

  Note:

  You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.

  You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx

  Method 3: Run a scan of the System File Checker.

  http://support.Microsoft.com/kb/929833

  It will be useful.

• error 1075 the dependency service does not exist or has been marked for removing windows xp

  The DHCP Client has stopped, but it is configured to start automatically.  When I try to reboot, I get the following message: error 1075 the dependency service does not exist or has been marked for deletion.  I need help to solve this problem.  Because of this problem, I can not connect to the internet.  My connection continues to try to acquire a network address and I lost my IP address.  I need help to fix this error on my Windows XP machine.  Thank you!

  See if this article solves your problem:

  "Error message when you start the DHCP Client service on a Windows XP-based computer:"error 1075.
    <>http://support.Microsoft.com/kb/915162 >

  HTH,
  JW

• error 1075 the dependency service does not exist or has been marked for deletion

  Im trying to find solutions for this error with windows vista. The only solutions with microsoft in the VISTA section is for xp machines. Go figure. Im trying to reboot the Client DHCP service and this is the error I get. (error 1075 the dependency service does not exist or has been marked for deletion). I tried to fix the registry key to match a working vista machine, but it did not work. This is the registry that I corrected. HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP

  Just delete the registry entry and restart the system. It should work perfectly. It worked for me.

  1. Click Start, click run, type regedit in the Open box, and then click OK.
  2. In the registry editor, find and then click the following registry subkey:
     HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\DHCP
  3. Right click on the entry DependOnService , and then click remove instead of change

• Error failed with error 0 x 80070424: the specified service does not exist as an installed service.

  I have DSL and a wireless printer that work well when the system starts; EXCEPT the desktop icons disappeared so I can't manage them! If I stop DSL through the system icons, I get the following error messages when I try to restart or to solve problems: do you know what are the services that I need to install/reboot?

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity warn HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved warn FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved warn FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved warn HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved error Could not make an HTTP connection. error Could not make an HTTPS connection. error Could not make an FTP connection.

  Diagnosis of last run time: 16/05/12 16:09:47

  Diagnosis of network adapter

  Network location detection Info Using the Internet connection at home Identification of network adapter error Failed with error 0 x 80070424: the specified service does not exist as an installed service.

  HTTP, HTTPS, FTP Diagnostic

  HTTP, HTTPS, FTP connectivity

  warn	HTTP: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved
  warn	FTP (passive): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  warn	HTTP: Error 12007 connecting to www.hotmail.com: the server name or address cannot be resolved
  warn	HTTPS: Error 12007 connecting to www.passport.net: the server name or address cannot be resolved
  warn	FTP (active): error 12007 connecting to FTP.Microsoft.com: the server name or address cannot be resolved
  error	Could not make an HTTP connection.
  error	Could not make an HTTPS connection.
  error	Could not make an FTP connection.

  Thanks for your attempt to solve my problem.

  Curiously he solved my problem of network while solving what has proved to be a problem with the firewall of Windows (see below): who knew?

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-Security/Windows-XP-Security-Service-Center-error-1060-and/1476c2b6-8161-4ccd-a69f-93292b5152da

• My operating system is Windows XP Home Service Pack 3. In the process of printing two jobs, first filled, but second one hung up. Error message was the print spooler does not.

  I followed the suggestion to use start > Control Panel > administration tool > services > print spooler > properties.

  System in automatic mode but State of the said service stopped.

  I get error 1075: the dependency service does not exist or has been marked for deletion.

  Printer worked this AM, but stopped working between two print jobs.

  I used Mr. Fixit to diagnose and fix the problem. Mr. Fixit indicates the print spooler service is not running, but cannot fix it.

  Is there a source code for Windows XP service pack 3 which can be downloaded to replace the corrupted code?

  Thanks for your help

  Curry:

  I have followed your suggestion after that someone else provided the steps for me to do the program accept net start spooler.

  The error message was THAT SYSTEM ERROR 1075 has occurred.

  The dependency service does not exist or has been marked for deletion.

  If I need to reload the operating system, I have a back up saved on a hard drive.

  Do you know what file (s?) needs to be recharged?

  Thanks for your help.