Error: "at least one tracks is protected"when trying to burn some songs CD's favorite original

Original title: the protected when burning music

I hope that this question is in the right place.

I am trying to burn some my tracks favorite original CD in my library on a blank CD, so I have all my favorites on CD one.

The problem I'm having, is that when I start to the burn, a window appears and says... "that at least one of the tracks is protected"

Where to look, or go to find that trace is in order to remove it, and then burn the rest?

Thanks in advance.  :-)

Hello

It seems that burning rights are missing for one of the tracks.
It's ok to burn the tracks. If CD burning rights are missing on the slopes, then you will burn successfully tracks.

If the song file is protected by the rights of use, these rights may allow for playback of the song on the computer but prohibit burn them on a CD. If the Information button appears next to the song in the burn list, click the button to see more information on the issue. For more information on usage rights, see the DRM: frequently asked questions.

For more information, see burn a CD or DVD in Windows Media Player: frequently asked questions

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • Error: there is no recording device detected when trying to burn CD or DVD

    Original title: drive or CD or DVD disc burning

    I have re-installed Roxio Easy CD & DVD Creator 6 on my pc. It was installed and worked very well before.

    I have open and try to burn a DVD, and he says there is no record of the found device. I have burned many DVDs using this program before.

    I also open iTunes to listen to music and I get this error message.

    Caveat!

    The registry settings used by the iTunes for importing and burning CDs and DVDs are missing. This can occur as a result of installing other CD burning software. Please reinstall iTunes.

    I uninstalled Roxio and iTunes and reinstalled iTunes but with no result on the possibility to even burn CDs again. I tried to system restore to before I installed Roxio, but it does not point restoration to date that I have installed (3 December 2010), I also can't go back to November to see if there is a restore point for that month.

    Hi fischer881,

    Try the following steps to start the IMAPI CD-Burning COM Service and check the result.
    a. Click Start, click Run, type services.msc and click ok.
    b. in the list of services, double-click IMAPI CD-Burning COM Service.
    c. change the startup type to automatic, and then click Start.
    d. click on apply and then click ok.
    e. restart the computer and check if the problem persists.

    For additional troubleshooting steps, see http://support.microsoft.com/kb/324129
    See also: Secrets of Windows XP CD burning

    For support of iTunes, please post your query to iTunes Forums

    See also Forums of Roxio

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How can I fix C00D199F error code when trying to burn a CD with Windows Media player.

    Original title: How can I fix C00D199F error code

    Error message when trying to burn a cd with Windows Media Player

    Hello

    1. what version of Windows Media Player do you use?

    2. the specific issue of burning CD using WMP?

    3. What is the exact full error message?

    4. what you are trying to burn?

    5. is the specific question on the disk?

    Method 1: You can run the fixit available in the link below and

    Your CD or DVD drive cannot read or write media

    http://support.Microsoft.com/GP/cd_dvd_drive_problems/en-us?EntryPoint=lightbox

    Method 2: Clean the disc

    Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

    Select a slower recording speed and check if that helps.

    1. in the Tools menu, click Options, and then click the devices tab.
    2. in devices, double-click the CD burner, and then click the recording tab.
    3. in the write speed list, select a slower speed.

    Method 3:

    Perform the clean boot and check:

     

    http://support.Microsoft.com/kb/310353

    Follow the above article.


    If you have any third party installed a CD/DVD burning software, uninstall them temporarily for Add / Remove Programs. Subsequently, check if you are able to burn CDs in Windows Media Player.

    Reference: Burn your own custom CDs

    Hope the above information is helpful.

  • Error: Insert the CD into the CD player when trying to burn disc Windows Media Player

    Original title: cannot burn music from WMP.

    Try to burn music from Windows Media Player, does not drive D: burn:

    A cd I burned another computer, read in my drive D: as "CD ROM".  But I got a 'blank' CD - R in drive D: and it has not recognized - msg "INSERT CD into DRIVE D:" only.

    I don't think I have a drive for burning CDs. -correct?

    007Trina

    Hi 007Trina,

    1 you get an error message when trying to burn the disc using Windows Media Player?
    2. what version of Windows Media Player?

    It seems that the CD is not recognized as a recordable device. We recommend you to try the steps mentioned in this article and check the difference:http://support.microsoft.com/kb/316529

    For more troubleshooting, see How to troubleshoot problems that occur when you write data to an optical disc CD-R or CD-RW in Windows XP

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

    I get an unknown error 4260 when trying to burn a cd using itunes, I have a windows xp pc and used to burn the cd fine until 2 weeks ago, I don't know what has changed... Can anyone help please?

    Hello raulganau, welcome.

    I suggest to try the system restore to restore the system to a date before the problem started. Try this...
    1. click on START
    2. click on "all programs".
    3. click on "Accessories".
    4. click on "system tools."
    5. click on "system restore."
    6 follow the instructions on the screen to restore the system to a date before the problem started
    Although the system restore does not target the personal data, I recommend always backup your personal data, just in case something happens.
    For reference, I have included a link that provides more specific information about the restoration of the system and how to use it:
    Let us know if it works,
    Thank you!

    Ryan Thieman
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Illustrator from adobe OLA having some problems when trying to save some files his gift not quite showing memmory

    Hallo

    Illustrator from Adobe having some problems

    When trying to save some files his gift not quite showing memmory

    No one can say anything without good system information and details on your documents. We do not even know your version of I...

    Mylenium

  • I am trying to burn some of my downloads to computer on a disc and some songs come error and do not copy

    I am trying to burn some of my downloads to computer on a disc and some songs come error and do not copy

    Hello

    1. What is the format of the file you want to burn?

    2. what application you use to burn the disc?

    Method 1:

    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    Burn a CD or DVD
    http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD

    Method 2:

    Disc burning: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/disc-burning-frequently-asked-questions

  • Error: 'capture string not in correct format' when tried to run Microsoft Fix it

    Original title: micro solve this Center meets all attempts to click for repair by 'string input not in the correct format' to try to correct the printer does not print not while going through all the correct motions.

    Please see above under

    Hi llc333,

    1. what web browser are you help you to download Microsoft remedy?
    2 you get an error message when tried to print?

    Try these steps and check the result.
    a. Click Start and then click Printers and faxes.
    b. in the menu help, click on Help and Support Center.
    c. in Help and Support Center, click fixing a printing problem.
    d. in the right pane, click Printing Troubleshooter.

    Check if the following articles help you to fix the printing problem.
    1 see resources for the resolution of the printer in Windows XP problems
    2 see Advanced Troubleshooting for when you cannot print in Windows XP

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Receive "the file is greater than CD" message when trying to burn music

    original title: error burn.

    I'm trying to burn music to a CD of my files and had a message saying file is larger than the space CD, how do I

    If it's a wav file that you need to it on 2 CD download and use Audacity (Editor audio freeware) to edit the file and cut out. Turn it into an mp3 file or burn it as a data file.

    Or, if its an mp3 file, open it in Audacity and save it in mp3 format, but with a lower rate.
    ATTENTION: not all players can read burned CD, mp3 files first consult their documents.
    See you soon,.
    Jerry
  • Obtained at least one appeal of reading when executing the ODI interfaces

    Hi all

    I get 'Got minus one to read call' during the execution of the ODI interfaces... It is a failure when executing interface... Why this error occurs and where to look?
    Appreciate if someone responds.

    Thanks in advance
    RAM

    Check the listener.log.
    If there is a "TNS-12518: TNS:listener could not hand off client connection."
    use Note 550859.1 GUIDE to TROUBLESHOOTING TNS-12518 TNS listener could not hand off client connection

  • error cannot create an extract from dvd when trying to get a glimpse of film in dvd creation

    * - Original title - dvd creation

    When I try to get a glimpse of my film in creation of dvd, I get a message "crΘer one cannot extract dvd.

    Hello

    1. were you able to preview before using create DVD with no problems?

    2. What is the exact error message you get?

    3. this happens to all types of files?

    4 does occur for the sample videos?

    a. you can access the sample videos by clicking on start, click computer, and then click the videos section under libraries.

    b. try again with another DVD and see if you can get a preview of the content.

    I suggest you to refer to this article and check if that helps.

    Problems with creating a DVD-video using Windows DVD Maker: http://windows.microsoft.com/en-US/windows7/Troubleshoot-problems-with-creating-a-DVD-Video-using-Windows-DVD-Maker

    I hope this helps.

  • Error: Cannot copy Admin$\system32\dwrcs.exe when trying to use DameWare NT Utilities card remote Commander for remote control a workstation.

    Original title: impossible to copy to Admin$\system32\dwrcs.exe.

    I'm using DameWare NT Utilities card remote Commander for remote control a workstation.   Other workstation remote control works fine.   On the workstation with the fact that I'm having the problem the following message appears:

    Cannot copy
    C:\Program Files\Dameware Development\Dameware control\DWRCS.exe mini remote

    TO

    \\workstation-name\ADMIN$\System32\DWRCS.exe

    System error: 5

    The system message:

    Access denied

    I don't think it's a matter of DameWare since other workstations are accessible.   I think that this could be a Windows problem with a kind of security.  Anyone know?

    Hello

    Your computer is connected to a server, or a domain?

    You can follow the steps in this link:

    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Access denied messages when the connection to the remote PC

    If your computer is on a domain network, I'd recommend posting your query in the TechNet forums.

    Hope the helps of information.

  • Error: ' ATL. DLL was not found"when trying to run any application.

    Original title: ATL. DLL was not found.

    I can't run applications in my pc someone in my house could not get into the computer and changed operating system to windows xp, which allows to be decommissioning of this t. Now, I get this message when I try to run an application: the application failed, because ATL DLL is not found, re - install the applicationmight solve the problem, but I get this message after you have re-installed and I don't know what else to do. Slow computer charges and freezing, something he has never done before. Same IE you have a problem, the only thing that works well, it is the remote assistant who helped me to get here and to him intermet, actually all of this with the dll thing started after I deleted the firefox browser because it froze the computer. Unable to restore my recovery utility, I tried a TI ran and told me it is impossible to get it back before I uninstalled firefox.

    Unfortunately, the support engineer technical 'expert' who is hired by the tips from Microsoft to run sfc/scannow will not help you.

    I would say that, as usual, the technical support engineer has not bothered to reproduce the problem and tried their own suggestion.

    If the atl.dll file is missing, sfc/scannow will launch but it does not work.

    It's just another wild goose chaseSupport Engineer.

    A lot of things will not work if the atl.dll file are missing.  System Restore will not work, Event Viewer do not work, you will not be able to get on the Internet, etc., until the file has been replaced.

    You try to run the system restore, you see the following message is displayed:

    Rstrui.exe - Unable to locate component
    The application has failed to start because ATL DLL not found.  Reinstalling the application may fix this problem.

    Try to open the event viewer, you see a message like this:

    MMC could not create the snap.
    MMC could not create the snap.  The snap-in may not be installed correctly.

    Name: Event Viewer
    CLSID: {975797FC-4E2A-11D0-B702-00C04FD8DBF7}

    Running sfc/scannow will be launched, but it will not run if the ATL DLL file is missing and you will see events like this in the event log (when you arrive, it works again):

    The server {8BC3F05E-D86B-11D0-A075-00C04FB68820} is not registered with DCOM within the required time.

    You can't get on the Internet using any browser.

    You have to somehow replace the missing or damaged file.

    The file might really be missing if he has been quarantined (actually deleted) by your antivirus not specified.  If the file is simply missing, you can just replace it and then later determine what happened to the file and decide what to do about this.

    You can search Windows on your system for ATL DLL and replace the missing file.

    THE ATL. DLL file must be in this folder (assuming that Windows is installed on your C drive):

    c:\Windows\System32

    Check and see if you can find the ATL DLL file in this folder, or if he's really missing, you will need to replace it:

    Depending on what applications you have installed, when you search for your ATL DLL system, you can find ATL DLL in several places on your system.  You must be sure get you the correct that belongs in c:\windows\system32.

    The most likely place to find a good copy of Atlant. DLL will be in one of these folders:

    c:\Windows\System32\dllcache
    c:\windows\system32\ServicePackFiles\i386

    Locate a copy of the correct Atlant. DLL from the file in one of these folders and copy/paste in the folder c:\windows\system32.

    Answered in the affirmative if invited to replace the existing file.

    There is a copy of the file on my SkyDrive, you can download a system not affiliated and then copy the file to a Flash DRIVE or a floppy disk and apply it on the afflicted system c:\windows\system32 folder.  Here's how:

    I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

    You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

    c:\Windows\System32
    c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

    Here is the link to my SkyDrive and you can get the file you need here:

    https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

    When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

    When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

    You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called atl when the name of the file should really be called atl.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

    You then put the downloaded files in the correct folders on your system.

  • Error - "product ID you entered is invalid" when trying to install Windows XP Home edition computer.

    Original title: with regard to the installation of windows xP home edition

    Mr President, I am reinstalling windows xp home edition in my acer laptop and its not to take my key and rejecting IE - the product id you entered is not valid. my product key is [deleted txt]. proof of license - x 12-53761 please send a new product to this email id - * E-mail address is removed from the privacy *.

    Hi Renon,

    You can follow this link & check if the problem persists:

    You receive an error message after you enter the product key when you try to install Windows XP

    Hope the helps of information.
    Please post back and we do know.

  • Error 0 x 80070424 in Windows Update when trying to install the updates.

    Original title: in windows xp error 0 x 80070424.

    had downloaded antivirus system music next network.removed Center says this update is disabled when on that I'll update magazine, he says it is. When

    I go to windows update with what happens as soon as you start to express, as the bar moves as if it checks then that it cannot display the window

    error 0 x 80070424

    Hi williamjennings,

    Are which antivirus you referring?

    This problem occurs if a service that is required for Windows Update or Microsoft Update is not registered.

    You can follow this link and check if the problem persists.

    Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424

    Hope the helps of information.
    Please post back and we do know.

Maybe you are looking for

  • Having WiFi problems could be Time Capsule

    I have an Arris 6190 modum, but I have the old model of the time Capsule that I use for my main router as well as two airports hard apple wired connected. Comcast came out, and they suggested that the old time Capsule could be the problem. Have not d

  • Updated to 5.0.1, Mozilla and Google Plus still says it's expired.

    I received an invitation to Google more. When I went to the site, he said that my Firefox is obsolete and it updated. So I did, to 5.0.1 even my "about Firefox" it's up-to-date.However, when I came to Google, he said still it's expired and when I go

  • Re: Toshiba 32L 4333 stops responding

    Hello and happy new year! We recently purchased TV model 4333 32L. We have a major and a minor problem. Problem major is that when I surf the channels with the CH keys + / TV becomes sometimes totally insensitive and the only solution is to unplug th

  • Iomega Home Media Network Hard Drive dead

    Hello My HDD network collapsed Iomeag a couple of years of work. I looked at the cost of retrivle data and he let one hand, I can't afford it. However all my children childhood pictures are here and I really want them. Finally, I decided to give him

  • BlackBerry Smartphones Cant find number of Center message on BlackBerry 9530

    I need help... im frustrated by the minute. my screen cracked and I sent my camera to set, I came back and I can't send text messages (but I can receive them). I am told that I have to change my service center number (and I was provided with the numb