error at startup: 2 Partions Active

I get an error on startup upward on a windows XP computer '2 active Partitions' and all it allows me to do is try again or enter setup.  I tried to boot from the CD, but once get going you and trying to recover, he said: none found hard drive.  There is only one hard disk of the computer.  Can I do to solve this problem?


1. you have Windows Vista or Windows 7 installed with Windows XP?

2 have you made any changes to the computer before the show?

In case you have Windows Vista or Windows 7 with Windows XP installed, try the steps of troubleshooting provided in the link below.

Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

Tags: Windows

Similar Questions

  • Error at startup. Need serious help.

    I am not able to perform a search on and especially all the search engine, it's evidence of a connection not approved and if I get complete site then it works some time (for example I tried to configure the real clock timings. In addition, even after download ad-blocker, I always face problems ad.

    What is the message of the error at startup? Is it in the page itself or a pop-up?

    There are several potential causes of generalized certificate errors. It's Firefox is not completely set up to work with your security software (or using Firefox's Reset feature, which means that set up again). But the malware is also a potential culprit.

    You have added all the exceptions (using the Add Exception button in the section "I understand the risks" of the error page)?

    You can check that your Firefox connection settings have not been changed:

    "3-bar" menu button (or tools) > Options > advanced > tab mini network > button "settings".

    You can try 'No proxy' it.

  • I get this error at startup: mozupdate.dll missing. What should I do

    mozupdate.dll error at startup
    I installed a new copy of firefox and the problem remains.


    Please see this.

  • trayyapp error at startup

    I downloaded a few Assistant s/w and hp driver printer for my dv4 and maybe a few other s/w HP.  Now, I get a Trayapp.msi error at startup.  I don't see no trayapp s/w can I specifically reinstall or remove.  How can I tell what s/w must be reinstalled to get rid of this error?

    It is likely a piece of software which it was installed or uninstalled recently. You have installed an HP printer on this computer?

  • Realtek RTL8101 PCI Ethernet is in error during startup

    Hi all
    I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
    The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

    PXE - E61 Media Test failed
    MOF: Left PXE ROM

    Can any help with this problem



    Hmm you ve you have a problem with the Vista boot! :|

    Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

    Perhaps the BIOS can not find HARD drive due to a hardware problem.

    Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
    Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

    Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

    If all this procedures don't help I recommend you contact the ASP in your country.
    The technician must check the laptop and if necessary, it should replace the HARD drive.
    Your warranty is valid so that everything should be done for free.

    Good luck

  • Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to

    Desktop PC's processor HP 251 - a11, Windows 10, AMD quad core A6-6310 accelerated with 4 GB memory DDR3 system and 500 GB hard drive. I installed I tunes last version and cannot operate.  Error message says Hello not activated.  Tells me to go to the Control Panel then administrative tools and allow to Hello.  I followed these instructions, but I can't activate Hello.  What did wrong and how I can activate the Hello?  My email is * any help is greatly appreciated

    < email published by host >

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.


  • HP PhotoSmart Essential error at startup


    Until the other day I had any problems when I start my computer.  A few days when I started the computer I got a pop up titled 'HPPhotosmartEssential' box and it said "Please wait while Windows configures essential HPPhotosmart" and a few seconds later another popup box titled "HPPhotosmartEssential" the following information - "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personlel provider or support package ".

    I have more the OfficeJet J4680 printer installation CD but I don't have the software to download so I opened it upwards and it was installed in the temp folder.  of which I went to start and typed folder and opens this file and follow these steps...

    Open the file "Setup."

    Open the folder "Scan". Right click on the "scan" (windows installation package) file and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

    Return to the folder and open "bpd_scan" installation folder. Right click on the file 'bpd_scan' (windows installation package) and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

    When I clicked on repair I received a new window bpd_scan error message that says: Module C:\Program HP Imaging\bin\hpqebpd2.dll failed to register. HRESULT-2147220473. Please contact support staff. I clicked on OK & following the next step

    Return to the folder and open "destinations" installation folder. Repeat the process above and that the repairs happened well.

    I restarted the pc but the problem persists.  (I deleted the shortcut of this file that was located in start > programs > startup - I deleted the shortcut of this file (called HP Digital Imaging Monitor).)

    I also opened a command prompt (run as administrator) and type in regsvr32 hpqebpd2.dll and who stated DLLRegister Server in hpqebpd2dll.

    I restarted the pc, but when I click on the file to open it (even if I do a right click and run as administrator) I still get 2 contextual window boxes.  And when I click OK or cancel the boxes still jump upwards of 3 or 4 times until it stops.

    I noticed that when I clicked to run / open this file it will appear in the lower right but I always get these boxes popup several times.

    Nothing had changed from one day to the next on the pc so I don't know why the problem occurred suddenly.  I ran several scans online for viruses and malware, as well as a boot scan, but nothing was found.   I have run ccleaner and noticed that he has found a missing DLL to C:\PROGRAM HP IMAGING\bin\HpqSRmon.exe

    I am running Windows Vista Home Premium with all current updates and is an officejet j4680 printer all-in-one.

    Others want a complete uninstall of the software to uninstall Panel or revo control printer and then reinstall the software I don't know what I can do to possibly solve the problem.   The printer software is version 14.

    Other possible suggestions or solutions would be very appreciated.


    I'm glad you responded! I wanted to share with you all what I have solved my problem last night after having carefully followed the steps that I mentioned above. This way I can now explain the steps in a little easier way. When I started to experience this error on startup, I thought it was related to my network because it happened also when I turned the printer on and outside. I have to press OK, Cancel, etc. what felt like 50 times before my error message disappeared. I know it's a different file, but the symptoms are exactly the same, since an uninstall did not resolve the question or fixing things in Device Manager. It seems that the link you have provided very simple steps to a L3 uninstall. The great binding, but I found a simple way for the common user. Here are the steps that I took last night and my computer worked never better:

    1. I did a normal uninstall first. Don't forget if you have a USB cable, wait that uninstalling invite you to remove the cord but also before Setup tell you plug it back in. The complete uninstall took almost 25 minutes.

    At the end of the uninstall, you will get a prompt to click 'Finish', however I didn't click it. I've been waiting to restart my computer after I ran the disk cleanup utility in all programs > Accessories > system tools > disk cleanup.  This process took almost an hour.

    2 after disk cleanup was complete, I restarted the computer by clicking on the button 'Finish' the HP software that was always on my desk.

    3. after the restart, I followed the link to CCleaner and would like to mention to people not too savvy to be careful by pressing the green button 'Download now' more than once computer. It seems that there are a handful of commercial products that look like they tried to trick you into downloading the software.

    4. once the download is complete, CCleaner has opened and seemed much easier to use than I thought. I chose the tab register on the left, "scanned for any question," then selected difficulty scan after you have backed up files to remove (the software asked me if I wanted to save that I did). Sometimes you can scan up to three times until all problems have been corrected. As easy as it sounds, I still highly recommend reading so much about this product before installing it (see previous posts). This process was done very quickly, so I decided to use the file cleaner as well. Who did take a long time - about 30 minutes.

    5. this time, I rebooted by computer by stopping completely and then back on with the power button. I always liked this method instead of select "restart" your computer.

    6. I have confirmed my operating system on my computer will start and by doing a right click on 'My Computer' and selecting Properties at the bottom of the box grey just to make sure that I do not install the HP bad software. Then everything just re-installed the software at by typing the name of my printer tab support and drivers. The whole installation process took 20 minutes and even got an error at the beginning of my extraction process which stated "the Extraction failed. File is corrupted. "My heart is Serra for a bit, but after having clicked on the button"Download"once again, I have had absolutely no problems my network printer installation.

    7. I would like to add, during the installation process, you will see a screen that says 'Click here to customize' and I deselected product Participation, HP Update and some other useless tools, but I kept the driver, the solution, HP Imaging Device Center (which is what was causing my problem) and HP Photosmart Essentials since this is what was causing the problem. I had no problem after that.

    8. Finally, I did a reboot to ensure that all boot errors went away and the computer booted faster than ever with no error. Final test of all the features worked great. I was excited to try these steps on my own last night so that I could provide a way to rephrase things for all those too afraid of getting deep into their computer files. I hope as the method to keep it simple you will also feel because that please don't forget, using third-party software comes with its own risks. Let me know if this does not work, and then we can speak of an uninstall of L3/L4.

  • Center of solution error at startup - HP4500 wireless


    HP Officejet Pro 8500 A909g

    Win 7, 64 bit, Intel Dual Core

    Error at startup of the solution center 'Solution Center cannot work because your installation is not complete.  "Please plug in USB (I am running wireless) or restart the installation of the CD.

    Both software & printer worked very well for a long time.  To reinstall the software (yet) as 8500 disappeared from ground Ctr.  Removed all HP using HP uninstall disk, and then click Add/Remove programs.  Restarted the modem and printer.  Install and the latest version of the downloaded software went well.  8500 wireless recognized installation is complete, test page print wireless.  At the exit did not restart. Tried to ground Ctr and above got the error at startup.  I rebooted.  The same problem.  Then, I removed all and tried again with the same result.  HP printers are great - the software I used (in addition to time & different HP printers) makes me absolutely crazy!

    Kind regards


    Hey Sherich - Id suggest giving the utility Install of Windows 7 to try first and then the doctor of printing & scanning HP. They can be found here: Hp Diagnostic utility's

    Let me know if or the other of these tools are able to solve the problem. Otherwise post returns with all new details or error messages, and we can go from there.

    Sorry for the delay!


  • error on startup: "error loading ozujufuxuzedesuv the specified module rundll32.exe is not found."

    I only get the error at startup code. "error in loading rundll32.exe ozujufuxuzedesuv the specified module cannot be found"

    You have a virus or other such pest or it could be the remnants of a pest that has been deleted by your AV software  Run a Malwarebytes and SUPERAntiSpyware scan on your machine and see if things change.


  • I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

    I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

    The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

    Methods of resolution:
    I suggest you to download windows desktop search for additional and install.

  • nwiz error at startup "nwiz.exe hs has encountered a problem and needs to close. We are Sorrel for the inconvenience. »

    original title: nwiz error at startup

    I get an error on nwiz to restart early upward. The error indicates nwiz.exe hs has encountered a problem and needs to close. We are money for the inconvenience.

    I then send an error report to Microcosft. They respond with: a problem of NVIDIA graphics driver. NVIDIA Graphics Driver has stopped working properly. To resolve this issue, go to the NVIDIA Corporation website to download and install the update:

    At this point, I tried to contact NVIDIA, but they ae not able to provide any information on the update I need.

    I use HP pavilion 754n, Windows XP service pack 3. Presume the NVIDIA was delivered on my computer in 2002. All of the suggestions.

    Thank you



    The video card drivers are corrupted on your computer please uninstall the graphics card in the Manager of devices and then re - install the latest drivers from the manufacturer's website.

    How to manage devices in Windows XP

    How to solve the problems of hardware with Device Manager

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network. Why would it gives this error at startup.

    When a computer XP starts, the following errors occur. Can't find Mac addresses, can't find DHCP at startup. PC is not connected to a network.

    Why would it gives this error at startup?

    It is not a Windows problem, it happens very early in the boot process until Windows is still a part of the image.  Your computer is configured for a remote network via PXE boot and there is no this PXE server so that you get this error message.  With PXE network boot, you can start a computer without him having a hard drive, the operating system resides on another machine on the network.  When the BIOS does not find the PXE server it gives you the error message, and then it proceeds to the next start equipment, which is probably your local hard drive.  Go into the BIOS and disable the PXE boot option or move it to the bottom of the boot order so that the hard drive is set as the primary boot device.


  • Error at startup of disc

    Whenever I boot, I get the message

    "Read a disk error has occurred."
    Press Ctrl-Apt-del to restart. "

    The only changes I made were resize the partition about 60 GB with gparted (remember, the windows partition had about 260 GB free in any case) and installed ubuntu on this very place, I released. Basically, now everytime I try to boot Windows I get this error. It's only a few minor drawbacks at the moment, but I'd appreciate something to help me get to use my application. [b] on ubuntu, I can mount the complete file system, browse and correct it. [/ b] The file system is very good, the hard drive is fine.

    If you can help at all, please, I have an Acer Aspire M1100 with stock hardware installed. Do not run Windows 7 my Dell Dimension 3000 shit goes, that's why I have Windows XP installed.

    Hi Mike - I found this thread through a search - I hope this is OK to post here...

    I now get the same error message on my PC (Dell Dimension 4100) after the x Sockets in my house jumped - off the PC - and then back on later. PC has XP Professional on it. I looked through the XP CD Recovery Console - chkdsk reported mistakes - I've also run fixboot and fixmbr but I get the same error at startup. I don't seem to be able to start using the XP CD.

    Have you advice? In addition, my partners laptop has Vista and a DVD - RW drive - I would be able to make a disk bootable CD to start XP?

    Thanks, Nobby

    If you put a different HARD drive in your current machine with existing XP is installed, you can have a bit of a problem.  If XP has been installed on the drive in another machine then it will search for the material of the other computer.  So if you put another drive in this machine, you may have to reinstall XP on it.  Or you can put this drive in another machine as a slave drive and save your files.  Anyway I think that you will be able to recover your information since you were able to do an installation to and able to navigate so that in the Recovery Console.
    Once you have your data safe, I would check with Western Digital for a disk utility that can test the drive completely.  At this point, he may be able to format and mark bad sectors and make it again completely usable.

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz".

    RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz". I also noticed my cpu runs sometimes very high without running programs. audit in the process, it seems to be the system idle using a lot of cpu. My pc is several years old and think of memory starting to dissapate, I tried to remove the afew channels recently and I was wondering if that has something to do with the error.


    Were there any changes (hardware or software) to the computer before the show?

    Method 1: Put the computer to boot and see if it helps.
    To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
    Note: follow step 7 to reset the computer to start as usual after the boot process.
    Method 2: Perform the steps from the link below and see if it helps.
    Method 3:
    Run a full scan with your antivirus software.
    Hope this information helps.
  • I get dll error at startup messages, slow down my computer. Files that cannot be found are buzixu.dll and grfamsg.dll

    Files that cannot be found are buzixu.dll and grfamsg.dll. The operating system is vista.

    Thank you.

    * original title - Hi, I get dll error at startup messages, slow down my computer.  Does anyone have ideas how they could be fixed. Thank you very much.*


    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

Maybe you are looking for

  • Satellite A205-s4707 and WXP

    What is my Satellite A205-s4707 capable of top ranked to windows xp?

  • No magenta Pigmented

    My HP Photosmart 2575 does not print any magenta more after replacing a color cartridge. The print heads are clean.  What other cause can there be? My HP Photosmart 2575 print magenta geen meer na het vervangen van een kleurcartridge. Of Köppen zijn

  • How can I return my computer to the factory setting.

    How can I return my computer to the factory setting.

  • The input language keyboard

    I have Windows 7 Professional 64 bit on my laptop. I added the Persian as an input language, but when I display the keyboard properties it shows nothing (touch typing to see the void). When I move the language bar, but sill make English characters on

  • Attributes of OBIEE separate column in analysis

    Hi allI am fairly new to create analysis OBIEE and I need help. We have a table called 'Attributes of Service request' and there is an attribute called "number of days open. Currently, for the column that's just showing ' < = 5 days open ' and I'm lo