Error at startup, insert BPD Software

Similar Questions

• Error at startup. Need serious help.

  I am not able to perform a search on Google.com and especially all the search engine, it's evidence of a connection not approved and if I get complete site then it works some time (for example www.facebook.com). I tried to configure the real clock timings. In addition, even after download ad-blocker, I always face problems ad.

  What is the message of the error at startup? Is it in the page itself or a pop-up?

  There are several potential causes of generalized certificate errors. It's Firefox is not completely set up to work with your security software (or using Firefox's Reset feature, which means that set up again). But the malware is also a potential culprit.

  You have added all the exceptions (using the Add Exception button in the section "I understand the risks" of the error page)?

  You can check that your Firefox connection settings have not been changed:

  "3-bar" menu button (or tools) > Options > advanced > tab mini network > button "settings".

  You can try 'No proxy' it.

• trayyapp error at startup

  I downloaded a few Assistant s/w and hp driver printer for my dv4 and maybe a few other s/w HP.  Now, I get a Trayapp.msi error at startup.  I don't see no trayapp s/w can I specifically reinstall or remove.  How can I tell what s/w must be reinstalled to get rid of this error?

  It is likely a piece of software which it was installed or uninstalled recently. You have installed an HP printer on this computer?

• HP PhotoSmart Essential error at startup

  Hello

  Until the other day I had any problems when I start my computer.  A few days when I started the computer I got a pop up titled 'HPPhotosmartEssential' box and it said "Please wait while Windows configures essential HPPhotosmart" and a few seconds later another popup box titled "HPPhotosmartEssential" the following information - "there is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your personlel provider or support package ".

  I have more the OfficeJet J4680 printer installation CD but I don't have the software to download so I opened it upwards and it was installed in the temp folder.  of which I went to start and typed folder and opens this file and follow these steps...

  Open the file "Setup."

  Open the folder "Scan". Right click on the "scan" (windows installation package) file and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  Return to the folder and open "bpd_scan" installation folder. Right click on the file 'bpd_scan' (windows installation package) and click 'fix '. If no error message appears, once again, right-click on the file and select "install".

  When I clicked on repair I received a new window bpd_scan error message that says: Module C:\Program HP Imaging\bin\hpqebpd2.dll failed to register. HRESULT-2147220473. Please contact support staff. I clicked on OK & following the next step

  Return to the folder and open "destinations" installation folder. Repeat the process above and that the repairs happened well.

  I restarted the pc but the problem persists.  (I deleted the shortcut of this file that was located in start > programs > startup - I deleted the shortcut of this file (called HP Digital Imaging Monitor).)

  I also opened a command prompt (run as administrator) and type in regsvr32 hpqebpd2.dll and who stated DLLRegister Server in hpqebpd2dll.

  I restarted the pc, but when I click on the file to open it (even if I do a right click and run as administrator) I still get 2 contextual window boxes.  And when I click OK or cancel the boxes still jump upwards of 3 or 4 times until it stops.

  I noticed that when I clicked to run / open this file it will appear in the lower right but I always get these boxes popup several times.

  Nothing had changed from one day to the next on the pc so I don't know why the problem occurred suddenly.  I ran several scans online for viruses and malware, as well as a boot scan, but nothing was found.   I have run ccleaner and noticed that he has found a missing DLL to C:\PROGRAM HP IMAGING\bin\HpqSRmon.exe

  I am running Windows Vista Home Premium with all current updates and is an officejet j4680 printer all-in-one.

  Others want a complete uninstall of the software to uninstall Panel or revo control printer and then reinstall the software I don't know what I can do to possibly solve the problem.   The printer software is version 14.

  Other possible suggestions or solutions would be very appreciated.

  TIA

  I'm glad you responded! I wanted to share with you all what I have solved my problem last night after having carefully followed the steps that I mentioned above. This way I can now explain the steps in a little easier way. When I started to experience this error on startup, I thought it was related to my network because it happened also when I turned the printer on and outside. I have to press OK, Cancel, etc. what felt like 50 times before my error message disappeared. I know it's a different file, but the symptoms are exactly the same, since an uninstall did not resolve the question or fixing things in Device Manager. It seems that the link you have provided very simple steps to a L3 uninstall. The great binding, but I found a simple way for the common user. Here are the steps that I took last night and my computer worked never better:

  1. I did a normal uninstall first. Don't forget if you have a USB cable, wait that uninstalling invite you to remove the cord but also before Setup tell you plug it back in. The complete uninstall took almost 25 minutes.

  At the end of the uninstall, you will get a prompt to click 'Finish', however I didn't click it. I've been waiting to restart my computer after I ran the disk cleanup utility in all programs > Accessories > system tools > disk cleanup.  This process took almost an hour.

  2 after disk cleanup was complete, I restarted the computer by clicking on the button 'Finish' the HP software that was always on my desk.

  3. after the restart, I followed the link to CCleaner and would like to mention to people not too savvy to be careful by pressing the green button 'Download now' more than once computer. It seems that there are a handful of commercial products that look like they tried to trick you into downloading the software.

  4. once the download is complete, CCleaner has opened and seemed much easier to use than I thought. I chose the tab register on the left, "scanned for any question," then selected difficulty scan after you have backed up files to remove (the software asked me if I wanted to save that I did). Sometimes you can scan up to three times until all problems have been corrected. As easy as it sounds, I still highly recommend reading so much about this product before installing it (see previous posts). This process was done very quickly, so I decided to use the file cleaner as well. Who did take a long time - about 30 minutes.

  5. this time, I rebooted by computer by stopping completely and then back on with the power button. I always liked this method instead of select "restart" your computer.

  6. I have confirmed my operating system on my computer will start and by doing a right click on 'My Computer' and selecting Properties at the bottom of the box grey just to make sure that I do not install the HP bad software. Then everything just re-installed the software at www.hp.com/support by typing the name of my printer tab support and drivers. The whole installation process took 20 minutes and even got an error at the beginning of my extraction process which stated "the Extraction failed. File is corrupted. "My heart is Serra for a bit, but after having clicked on the button"Download"once again, I have had absolutely no problems my network printer installation.

  7. I would like to add, during the installation process, you will see a screen that says 'Click here to customize' and I deselected product Participation, HP Update and some other useless tools, but I kept the driver, the solution, HP Imaging Device Center (which is what was causing my problem) and HP Photosmart Essentials since this is what was causing the problem. I had no problem after that.

  8. Finally, I did a reboot to ensure that all boot errors went away and the computer booted faster than ever with no error. Final test of all the features worked great. I was excited to try these steps on my own last night so that I could provide a way to rephrase things for all those too afraid of getting deep into their computer files. I hope as the method to keep it simple you will also feel because that please don't forget, using third-party software comes with its own risks. Let me know if this does not work, and then we can speak of an uninstall of L3/L4.

• Center of solution error at startup - HP4500 wireless

  Greetings!

  HP Officejet Pro 8500 A909g

  Win 7, 64 bit, Intel Dual Core

  Error at startup of the solution center 'Solution Center cannot work because your installation is not complete.  "Please plug in USB (I am running wireless) or restart the installation of the CD.

  Both software & printer worked very well for a long time.  To reinstall the software (yet) as 8500 disappeared from ground Ctr.  Removed all HP using HP uninstall disk, and then click Add/Remove programs.  Restarted the modem and printer.  Install and the latest version of the downloaded software went well.  8500 wireless recognized installation is complete, test page print wireless.  At the exit did not restart. Tried to ground Ctr and above got the error at startup.  I rebooted.  The same problem.  Then, I removed all and tried again with the same result.  HP printers are great - the software I used (in addition to time & different HP printers) makes me absolutely crazy!

  Kind regards

  Rich

  Hey Sherich - Id suggest giving the utility Install of Windows 7 to try first and then the doctor of printing & scanning HP. They can be found here: Hp Diagnostic utility's

  Let me know if or the other of these tools are able to solve the problem. Otherwise post returns with all new details or error messages, and we can go from there.

  Sorry for the delay!

  Sean

• error on startup: "error loading ozujufuxuzedesuv the specified module rundll32.exe is not found."

  I only get the error at startup code. "error in loading rundll32.exe ozujufuxuzedesuv the specified module cannot be found"

  You have a virus or other such pest or it could be the remnants of a pest that has been deleted by your AV software  Run a Malwarebytes and SUPERAntiSpyware scan on your machine and see if things change.

  http://www.Malwarebytes.org/
  http://SUPERAntiSpyware.com/

  John

• RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz".

  RUNdll error on startup pc appears "error loading Windows\TEMP\odbcwiz". I also noticed my cpu runs sometimes very high without running programs. audit in the process, it seems to be the system idle using a lot of cpu. My pc is several years old and think of memory starting to dissapate, I tried to remove the afew channels recently and I was wondering if that has something to do with the error.

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Put the computer to boot and see if it helps.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/929135
   
  Method 2: Perform the steps from the link below and see if it helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance
   
  Method 3:
  Run a full scan with your antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
   
  Hope this information helps.
   

• IAstorIcon error at startup

  Original title: error starting IAstorIcon IS a VIRUS?  "Icon" not icoM___How delete?

  New machine

  8G ram

  1 t hard drive

  Software is partitioned

  Error message appeared yesterday

  The free version of Malwarebytes Anti-Malware

  A Mfg installed McAfee

  Was Eusing Registry Cleaner

  Ran scans nothing found.

  Error at startup telling tgat what iastoricon does not start

  Adobe Flash installation error message appears - Flash is the most recent version

  Bought the full Version of MBam - ran scan found nothing

  Can not download

  Followed the instructions found on the page of Vista for IastorIcon

  Scannow then Chkdsk

  CHKDSK was clean

  Scannow came with corruption.

  Protection of resources is corrupt. Impossible to solve all

  addressed to the CBS then windir\logs\cbs\cbs.log

  Search could not find match

  Not always recognizing me as an administrator

  Windows Office Starter has disappeared

  Legacy Family Tree Program will be not open message error is a disk or network error

  Machine slowed near the top, does not meet all

  Problem event name: CLR20r3
  Signature of the problem 01: iastoricon.exe
  Signature of the problem 02: 9.6.0.1014
  Signature of the problem 03: 4b8f2448
  Signature of the problem 04: System.Xml
  Signature of the problem 05: 2.0.0.0
  Signature of the 06 problem: 4a275e0f
  Signature of the 07: 210 problem
  Signature of the 08:274 problem
  Signature of the problem 09: System.UnauthorizedAccess
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  Adobe flash error
  Signature of the problem:
  Problem event name: APPCRASH
  Application name: FlashUtil10l_ActiveX.exe
  Application version: 10.1.102.64
  Application timestamp: 4cc0fe46
  Fault Module name: FlashUtil10l_ActiveX.exe
  Fault Module Version: 10.1.102.64
  Timestamp of Module error: 4cc0fe46
  Exception code: c0000005
  Exception offset: 0000215c
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033
  Additional information 1: 0a9e
  More information 2: 0a9e372d3b4ad19135b953a78882e789
  Additional information 3: 0a9e
  Additional information 4: 0a9e372d3b4ad19135b953a78882e789
   
  
  
  
  

  I had this problem, but my computer did not work as you did... I just saw the error, reinstalled shop fast Intel, and it was fixed. It's pretty much the way less geek that I can think of to solve the problem, and it may be the most effective.

• Receiving an error on startup error: C:\Program Data\sytem 32\gameux.dll is not designed to run on Windows or it contains an error

  * Original title: error gameux.dll

  I recently got an error on startup associated gameux.dll.

  "C:\Program Data\...\gameux.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or your system administrator or the software vendor for support on the contracts. »

  Later, I discovered that my Norton 360 had quarantined the gameux.dll file a few weeks ago marked as high risk Trojan horse.  After scanning this file in the folder of Norton 40, it seems, is not a problem and was not actually a virus.  Then I looked in the windows System 32 folder and found that the file gameux.dll is actually still there.  Maybe repeuple Windows there.  Unfortunately, it doesn't seem to work.  Maybe an incompatible version.

  I tried to put the old file in System 32, but ran into problems of owner "TrustedInstaller", which I didn't change without a little guidance.

  Any ideas where I should go from here?

  Thank you!

  Dell Precision T1500

  Windows 7, 64-bit

  I don't know if you saw my post updated, but I'm sure that this question arises from Norton 360 brand gameux.dll file as a virus.  It quarantined the file.  Apparently repeuple Windows the Windows\System32 folder with a new file gameux.dll

  I think that some programs may have been pointing to the old file gameux.dll quarantined.  Norton, he was put in a hidden folder in c:\programdata.

  In any case, I deleted this version put in quarantine to gameux.dll and problem solved.  No more error on startup!

• "Start PXE on IPv4" error at startup on Windows 8 LO

  "Start PXE on IPv4" error at startup on Windows 8

  LO

  Salvation Hong,

  Thanks for posting your query to the Microsoft forum. I will certainly help you in this matter.

  The information that you have provided are not enough for us to decide the issue. Please provide us with more information.

  1. What is the brand and model of your computer?
  2. You did any hardware/software changes to your computer before the show?
  3. Your computer is connected to the domain?

  Runtime environment of seed (PXE), pronounced as "Goblin", allows computers to boot remotely via a network interface. PXE allows a client computer to boot from a server independent hard drives and installed the operating system.

  This occurs generally when the BIOS setting are changed or if PXE is not supported by the BIOS of the computer.

  I suggest you to contact the manufacturer of your computer to check the BIOS settings.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I would be grateful if you can provide us with the screenshot of the window to help you.

  Please refer to the article below, how to include a screenshot in your message

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Please post back with the results and the information requested, we will be happy to help you further.

  ____________________

  Thank you best regards &,.

  Isha Soni

• I get this error at startup: mozupdate.dll missing. What should I do

  mozupdate.dll error at startup
  I installed a new copy of firefox and the problem remains.

  Hello

  Please see this.

• Realtek RTL8101 PCI Ethernet is in error during startup

  Hi all
  I have EDT recently bought by Satellite A200-1CN notebook PC series. I'm having a problem at the start of the system that has Windows Vista installed.
  The Realtek RTL8101 PCI Ethernet v 1.02 (060510) gives error during startup. The error is to run is as follows

  PXE - E61 Media Test failed
  MOF: Left PXE ROM

  Can any help with this problem

  Concerning

  Hello

  Hmm you ve you have a problem with the Vista boot! :|

  Usually, this message appears because the BIOS can not find a source of start-up as ODD or HARD drive and then try to boot from LAN.

  Perhaps the BIOS can not find HARD drive due to a hardware problem.

  Hmmm. First of all, you should try to change the boot order in the BIOS. Put the HARD drive as first boot device.
  Save the settings and try to restart the laptop. If it is not possible to start the Windows Vista I guess that HARD drive is dead!

  Have you tried to reinstall Windows Vista using the Toshiba Recovery CD? Check this box!

  If all this procedures don't help I recommend you contact the ASP in your country.
  The technician must check the laptop and if necessary, it should replace the HARD drive.
  Your warranty is valid so that everything should be done for free.

  Good luck

• I have a code 10 error when I insert my SD card. How can I fix it?

  I have a code 10 error when I insert my SD card.  I click on update driver, to connect to windows update, but it cannot complete.  Is there any solution for this?  I reinstalled windows a few months ago SD card worked fine until a few days ago.  Thank you!

  Read this article completely, if you decide to apply the fix that is in the upper left corner.

  http://support.Microsoft.com/kb/921413

• I get this error at startup: this application has failed to start because uncdms.dll was not found. Reinstalling the application may fix the problem

  I recently did a full recovery on my pc.  I'm running on Windows XP Pro.  Since the resumption, I get this error at startup: this application has failed to start because uncdms.dll was not found.  Reinstalling the application may fix the problem.  I don't find Windows Search in my Add/Remove programs.  How can I uninstall it?

  Hello
  The uncdms.dll file is associated with the Application of desktop search in Windows that is used to find and view an overview of the different types of files, such as documents, e-mail, photos and music files on a computer.

  Methods of resolution:
   
  I suggest you to download windows desktop search for additional and install.

   
  http://support.Microsoft.com/kb/940157

• error at startup: 2 Partions Active

  I get an error on startup upward on a windows XP computer '2 active Partitions' and all it allows me to do is try again or enter setup.  I tried to boot from the CD, but once get going you and trying to recover, he said: none found hard drive.  There is only one hard disk of the computer.  Can I do to solve this problem?

  Hello

  1. you have Windows Vista or Windows 7 installed with Windows XP?

  2 have you made any changes to the computer before the show?

  In case you have Windows Vista or Windows 7 with Windows XP installed, try the steps of troubleshooting provided in the link below.

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529