: Error at the start of the disk system check "Windows is unable to read the disc.

Similar Questions

• I used chkdsk after trying to do a defrag and send a message that there was an error on the disc.

  original title: computer Dead after chkdsk

  I used chkdsk after trying to do a defrag and send a message that there was an error on the disc.  Asked me to use chkdsk after a statup as a volume is in use.  I did it but when I went through the suite, the computer was completely dead.  I think I gave the wrong settings of the chkdsk command.  How can I get my computer operational again?  I use Windows XP

  What do you mean by 'completely off '?  Is - literal?  All in all, nothing happens when you restart the computer?  No noise?  No fans? No beeps?  No video, no BIOS or POST information appear?

  John

• CS5 trial install error - insert the disc?

  I have successfully downloaded a Photoshop CS5 trial, but when trying to install the progress bar stops at 0% and I get a message that reads "Please insert photoshop cs5 disk to continue. Obviously I don't have the disk, because it is a downloadable trial. When I cancel the installation, I get a long list of error codes that starts like this:

  Exit code: 24

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 42 (s), 0 warning (s)

  ERROR: Payload Set cancelled status

  ERROR: Payload {007A2A28-D6A8-4D91-9A2B-568FF8052215} has an action 'install', but not resultState

  ERROR: Payload {02731921-5711-4E7A-A898-D6BCF0F2A1CD} has an action 'install', but not resultState

  I stumbled on one or two other people who have this problem, but especially windows machines, so I failed to find an answer to this problem.  a few explanations I've found are too technical for me to understand, I'm not a computer genius. One thing I noticed is that sharing options and permissions in the menu 'get info' install folder are grayed out and cannot be changed. By clicking on the padlock does not allow me to make changes as usual. Access to my user (admin) privileges are read, write, and read only for 'personal' and 'everyone '. Don't know if it's something to do with it, but I read another case where changing these settings solves the problem. I have tried to re - download the trial and move to new, but that has not worked.

  Help with this problem would be appreciated.

  Thank you

  I think that this happens if there is more than a mounted Installer. Have you tried to restart your entire system, reassembly of the installer, and then try to reinstall?

• Error-insert the disc when try to open the flash drive.

  Original title: why connect my USB drive as an external drive.

  When the flash drive is plugged into the USB port, it seems that it will be added as a flash drive, but then the following equipment added window indicates that an external hard drive has been added.  When I go into windows Explorer to open the drive in Explorer mode, it says to insert the disc.

  Hi JimScottATO,

  We will try this.

  First of all, make sure that you are connected under an administrator account on your computer. Then plug in your USB key.

  Click START then right click on my computer , then click MANAGE

  In the new window, click MANAGEMENT OF DISKS

  Find the name of your flash drive and right click.

  Click on the letter of change of road and railways

  And then change the drive letter to something not already taken by another drive on the computer, such as "x" or "v".

• my system shows an error with the disc of windows-no legend

  my xp os will be faced with a problem that shows with the legend "windows-no disk", and the error code is "exception processing message c000013 parameters 75b6bf7c 4 75b6bf7c 75bf7c".

  It's a shame that we don't know anything about your system, but it's the way things work here so I can give you some general tips about this message:

  If you mean see messages like this:

  No disk, Exception Processing Message c0000013 parameters 75b6bf7c 475b6bf7c 75b6bf7c

  Some people think that people there may be to not to use the device safely remove feature (and maybe), but I never use Safely Remove Hardware with external USB devices and I don't have this message for you if you can't understand it and other things work very well, you can tell XP simply can't show this message when there is no reason.

  Until you can determine what the 'real' problem is with your hardware, you can disable the pop-up message by making a registry adjustment.

  Before making changes to the registry, back up your registry with this free and easy to use tool popular:

  http://www.SnapFiles.com/get/ERUNT.html

  Click Start, run and enter in the box:

  Regedit

  Click OK to open the registry editor, navigate to the following key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows

  In the right pane, check the value of the ErrorMode setting.

  If ErrorMode is set to 0, double click on ErrorMode and set 2 (2 = disabled).

  Click OK to save the changes, and then click file, exit to close the registry editor.

  Reboot your system and check the things now.

  2 to the parameter ErrorMode stops at pop - up message but still material error log in the Event Viewer log.

  Learn more about it here:

  http://support.Microsoft.com/kb/124873

• Recycle Bin error that the disc is damaged

  I have a Windows 7 system that has 2 discs. 'E' drive is shared for a peer-to-peer network store files, but I get an error when files are deleted recycle Bin on / E: drive is corrupt I click ok and the message disappears. I tried various remedies like remove the trash but it always first appears

  How to repair a trash corrupted in Windows 7 and Windows Vista
  http://www.Winhelponline.com/blog/fix-corrupted-Recycle-Bin-Windows-7-Vista/

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

• Error when you try to connect to games for Windows Marketplace: unable to connect. ID Windows Live ID or the password entered is not valid. Enter your information and you reconnect. Code: 80048823

  Unable to sign in to games for Windows Marketplace

  Sign in to games for Windows Marketplace issues

  This message can connect to everything but the games for Windows Marketplace

  Unable to connect. ID Windows Live ID or the password entered is not valid. Enter your information and you reconnect. Code: 80048823

  Hello RobBurton,

  I suggest that you post your question in the Games for Windows Live forum below:
  http://forums.gamesforwindows.com/t/785.aspx

  It would be best to help with this question.

  Thank you

  Marilyn

• 41 of Firefox on Windows is unable to read the first second of MP3 files

  Although Chrome and Internet Explorer playback of MP3 files all normally, 41 Firefox doesn't playback the first second of any MP3 file.

  Example:

  http://www.sakisgouzonis.com/publicfiles/Sakis_Gouzonis_-_In_Unity_There_Is_True_Strength.MP3

  I started Firefox in Mode safe, but the problem is still there. I also removed completely all my modules, but the problem remains.

  Thanks in advance for your help on this issue.

  The new update (Firefox 42) solved the problem. Thank you very much.

• Win Vista: Restoration of the window tells me that there may be errors on the disk, check the disk fails or the other.

  Restoration of tell me that there are errors on the disc that allows the utility disk check, who then told me that it won't work while Windows is running and asks if I want the calendar for the next restart of Windows, I have check the Yes box and try to fix the errors. When I restart or turn off and on, nothing happens. It restarts normally.
  I wanted to restore it's because my laptop (dell inpiron 1525) is not hibernating or sleep I noticed after installing the updated drivers from dell. When I went to use the sys restore is when I noticed what is happening now.

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-system-repairs-from-the-Windows-recovery-environment-from-Windows-Vista-inside-out

  --
  ..
  --
  "spaz12" wrote in message news: 9fff9795-78 c 0 - 4A 41-9652-a30919d15ea2...
  > Restore tell me that there are errors on the disc which shows the disc
  > launch utility, who then told me that it won't work so that Windows is check
  If I want to schedule for next time window
  > restarts, I check the Yes box and try to fix the errors. When I restart or turn
  > and now turn it on, nothing happens. It restarts normally.
  > I want to restore it's because my laptop (dell inpiron 1525) is not
  > hibernation or sleep I noticed after installing the updated drivers
  > from dell. When I went to use the sys restore is when I noticed what is
  > right now.
  >

• When I tried to re install Windows XP, I received an "unexpected error" at the end of the installation. The computer then restarts and it gives me the error again.

  Hello

  I did a clean install on winxp pro, it ended by an "unexpected error", it will not install, shows me the error and restart try to reinstall and same error. I checked around and it could be due to the intallation disk which was scratched and unable to read the files (I tried the disk image and failed). I made a copy of the disc as soon as possible, but it is bootable. I tried putting in the cd copied, tried to locate the file but could not (don't kn OW the drive and folder).

  Is there a way to make the copy bootable cd? (in my pc, I made a copy of the Setup disk) or is it all the same to overcome this obstacle?

  Thanks in advance.

  Richard

  original title: clean install went wrong

  Hello

  What is the full and exact error message?

  Read the following article.
  Error message "an unexpected error has occurred (536821760)" when you try to install Windows XP
  http://support.Microsoft.com/kb/316400

• The error that says it cannot read the disc.

  I installed a CD using Windows Media Player AutoPlay as my default for audio CD the 1st song plays, but when I select the next song, I get a red X icon and an error saying the disc cannot be read and it climbs to the 3rd song. So, if I select another song, I get several red X icons on several songs. It happens with all prerecorded CDs that I install. The disks are clean and new and everything worked fine before, but I had my Windows Vista Home Premium reloaded recently. I don't remember if the player has worked properly for reloading. Why can it read well enough to still play some songs if it cannot read the disc. I'm getting confused. Can someone help me sort through this and help me make it work? I'm not too computer, so be gentle. Thank you... Dave

  I installed a CD using Windows Media Player AutoPlay as my default for audio CD the 1st song plays, but when I select the next song, I get a red X icon and an error saying the disc cannot be read and it climbs to the 3rd song. So, if I select another song, I get several red X icons on several songs. It happens with all prerecorded CDs that I install. The disks are clean and new and everything worked fine before, but I had my Windows Vista Home Premium reloaded recently. I don't remember if the player has worked properly for reloading. Why can it read well enough to still play some songs if it cannot read the disc. I'm getting confused. Can someone help me sort through this and help me make it work? I'm not too computer, so be gentle. Thank you... Dave

  =====================================
  Intermittent problems can be complicated to solve but it
  seems that you have a hardware problem with the
  optical drive. The player may require, cleaning service
  or replacement.

• Error message: Windows Media Player could not complete burning because the disc is not compatible with your player...

  I have one of the same type of disc engraved the other day without problem. Tried to burn a CD today the progress achieved 99%, then I got the error message. Windows Media Player could not complete burning because the disc is not compatible with your drive. Try to insert another type of recordable media or use a disc that supports a write speed that is compatible with your drive.

  Hi David,

  Thank you for giving us the opportunity to help you with this problem.

  According to the problem description, you were not able to burn a DVD with Windows Media Player.

  You get the error that the disc is not compatible with your drive.

  Let me ask you a question.

  (1) what is the type of DVD or CD you want to create?
  (2) don't you make changes to your computer before this problem?

  I would suggest a few troubleshooting methods. Run the Windows Media Performance troubleshooting tool and follow the steps in the link to burn a CD or a DVD.

  Method 1: Run Windows Media Player Performance convenience store.

  Please follow the steps below to do so.

  (a) key Windows + W keys on your desk.
  (b) write the Troubleshooting in the search box in the upper right.
  (c) select the Troubleshooting option after the search.
  (d) select the option of Performance of Windows Media Player .
  (e) click Next to perform the resolution of the problems of performance of Windows Media Player and follow the steps.

  Method 2: Follow the steps in the link here and burn the CD or DVD.

  Burn a CD or DVD in Windows Media Player

  http://Windows.Microsoft.com/en-us/Windows-8/burn-CD-or-DVD-Media-Player

  I hope that solves your problem. Please feel free to write back to us, if you are facing any problem related to Windows.

• ERROR MESSAGE ON START UP

  Hello:

  When I turn on my computer, I get a black screen that tells me that: "windows did not start successfully.  a hardware or software development could haved caused ths.  If your computer stopped responding, restarted unexpectedly, or was automatically closed down to protect your files and folders, select last known good configuration to return to the most recent settings that worked.  If a previous startup attempt was interrupted due to a power failure or because the power or reset button, or if you do not know what caused the problem, choose start windows normally.

  safe mode

  safe mode with networking

  safe mode with command prompt

  Last good configuration known (your most recent settings that worked)

  Start windows normally

  Use top and down arrow keys to move the selection of your choice.

  If I select or start windows normally, safe mode with secure mode or networking with command prompt; I get a number of messages: multi (0) disk (0) rdisk (0) partition 2/windows/system32/drivers/many different combos at the end (IE agpcpq.sys).  After the messages, it does not go further.

  If I select Safe mode, it goes to the microsoft windows xp startup screen and it's there (as if it were the treatment, but do not move a plus) and then finally goes back to the origanal black screen with options and the message above.

  I don't have a lot of fixing of computer knowledge, and I don't want to spend much money to get it repaired (as it is a low-cost netbook).  can I fix it myself or it it disappeared. Thank you for your time and your response.

  Hello

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/error-message-on-start-up-one-disk-needs-to-be/99fa19b5-7445-E011-9575-d8d385dcbb12

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/error-message-on-start-up-one-disk-needs-to-be/99fa19b5-7445-E011-9575-d8d385dcbb12

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-error-message-on-start-up-please-check-a/a8994dfb-7736-4d73-8b73-5daf3193627b

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_programs/download-error-message-on-start-up-from/25e44548-8a4f-41D4-90b0-50869de11a95

• Need expert help! CD player does not read the contents of the disc. Help!

  I searched and tried everything what we can imagine and impossible to find a solution. I can also restore because I don't really know this error at startup. Here are the symptoms and fixes I've tried. If there is someone out there who could help me it would be greatly appreciated!
  

  System:, I have XP w/SP3 installed. Dual-Core 3.0 G w / 3G P5N72T - MB Ram, HD 300 G, Asus CD/DVD Drive.

  Symptoms:

  • I had my CD player connected via PATA ribbon cable and my hard drive connected via a SATA cable.
  • My CD player will not autorun when an installation disc is installed.
  • My CD player will not read or display the contents of the disc when I use the file Explorer.
  • My letter of CD drive is D:\ and always appear as one of the discs.
  • When I use the command "run" and type: D:\install or D:\setup a windows "disk is not formatted" error appears stating "Windows is unable to read the disc. The disk might be corrupted or it could be in a form that is not compatible with windows.
  • My Green CD player will sweep on and I can hear it turn every time I try to explore the files or after I insert a disc, but she never autoruns, or displays content.
  • I decided to buy a new SATA CD drive and installed, unfortunately it does not work either exact problems remain.
  • I have two CD drives to another computer and they both work. So I know this isn't the disc or the lens.
  • I ran the utility Microsoft Fix It and she finds nothing wrong.
  • I ran the TweakUI to make safe autoplay features are on.
  • I did all the registry fixes proposed by microsoft and online forums. i.e. upper and lower, filters etc.
  • I removed the device from Device Manager and reinstalled.
  • I ran a virus, spyware, malware, and everything is clean.
  • I have the latest version of the system bios and all settings are fine. Most are on Auto that are associated with the detection.
  • Type of device DMA modes are selected in automatic detection.
  • If I could read a disc that I could try to reinstall windows XP, but it is not an option now until my CD player is fixed!
  • I don't have any installed like Nero buring CD software.
  • I actually installed Nero Light to see if it would read a disc, and of course I can see the disk and copy its content to my hard drive or take an image of the disk.
  • I tried to rename the drive, disconnect the drive.
  • I'm sure I tried other things, but can't remember right now!

  Thanks for your help in advance!
  Mike

  Hi msavage2000,

  It seems you have tried most of the steps to solve this problem. However, we would like to know if the drive does recognize the drive?

  As we know readers work, I would like you to try a new PATA/IDE cable and check the result.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The disc you have inserted not readable by this computer. What?

  I have been using an external hard drive (usb) for a few months. As I was falling images to save the disk I got an error that the disc is not readable. I have important files out there that has not been supported until a second source, how to make my computer to recognize the drive without formatting! I can also see it on my disk utility, but it won't allow me to repair the disc until I have format. What are my options?

  

  

  Try resetting the SMC and LANDAU with disconnected JEP, then re - connect and test. If you used another drive as your Time Machine backup, then the DHM has probably also been backup on it. If she has no HD doesn't have, so you can try the recovery of data such as DiskWarrior or DataRescue software and so those who fail, you may contact a data recovery service. Go on, ALWAYS make sure you have a redundant backup of all your data.