error bad image when the awakening as well as in e-mails

Similar Questions

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• In Vista, get Windows error bad image with Microsoft

  Hello

  I get a bad image of the user interface to logon with Microsoft error and start in safe mode. I then try the sfc/scannow command, but it comes up with another error stating that windows resource protection could not start the repair service. I am also unable to find my vista drive. Any suggestions? Hi, I'm a bad image of the user interface to logon with Microsoft error and have start in safe mode. I then try the sfc/scannow command, but it comes up with another error stating that windows resource protection could not start the repair service. I am also unable to find my vista drive. Any suggestions?

  Hello

  I would say that you can start your computer in a clean boot State and check if this is related to a software conflict of third.

  Note: Follow step 7 to your computer as usual.

  If this does not help, I'm afraid, you may need to do the Startup Repair and for that, you need the installation disc.

• Removal of destination of the image when the mouse is on document

  I have Adobe Acrobat Pro 9.   I want to delete the destination of the images used in the document image when the mouse is players above them.  Doesn't look good.

  Tried to save it and open with normal adobe reader and still have the same question.

  Help, please

  Thank you

  For example.

  With comtemporary versions of MS Word the file name of the inserted picture is, by default, placed in the alternate text field.

  With the inserted image, you will see a bounding box.
  Right-click to open the context menu and select "size".
  The "Size" dialog box is presented.
  You will see two tabs. The 'Alt text' tab.
  The value provided for the replacement text field will be the name of the image file.

  If your PDF file does not need to be accessible (i.e. ISO 14289-1 compatible PDF) then simply leave the value empty alternative text.

  If your PDF should be available then provide something meaningful for the value of the replacement text.

  

  Be well...

• I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this?

  Ideas:

  • You have problems with programs
  • I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this? messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image.

  At the start this morning, I received the message following "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image. Is there a simple solution to this problem? If it is ok, the unit freezes then

  Hello

  1. you remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  I would recommend that you run a full scan using theMicrosoft Safety Scanner and check if the problem is related to malicious software.

  Note: You may lose data while eliminating malware.

  Step 2:

  Test the issue in a clean bootand verify if the issue.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Make SFC scan and check if the problem persists.

• How do I enlarge the image when the mouse is clicked

  I want to enlarge the image when the user clicks on the image. How to make muse? Thank you!!!

  I think you are trying to implement something like 'Click to see in original size' for images in a slide show widget. If that's what you try to achieve, refer to a similar thread here a possible solution: http://forums.adobe.com/message/5225256#5225256

  Thank you

  Vinayak

• Is it possible with nested folders to show al images when the level folder highlight superior?

  Is it possible with nested folders to show al images when the level folder highlight superior? I thought that I used to be able to do, but I can't find a way to do it now.

  Mark,

  menu: Library-Online Show pictures in subfolders.

  Ja.

• Adding an image when the answer is correct and the other when the answer is false

  Hi all

  I have a problem that seems simple, but I can't find a way to solve it.

  I try to explain it:

  When I do a slide of questionnaire, I want to show an image when the answer is correct (although the box seems to say that your answer is correct press on Y to continue) and a different picture when the answer isn't with red boxing.

  If someone has an idea?

  Thank you

  Xavier

  Hello

  You are looking in the wrong place. Open the workspace Quizzing, easier. In the Quiz properties panel (now on the left), the accordion of Action to choose Advanced action, for "Success" and "on the last attempt"these actions are executed when the user clicks on the button submit, if at least you delete legends of success or failure by default as I explained previously."

  Lilybiri

• How to display a .swf image when the film is disabled?

  I wonder how to display an image or a swf image when the film is not play. Any information appreciated. Thank you!

  A swf is never really off if it is displayed. But if you want something to show when there is nothing going on in the file, then just do sit in a frame with any content you intend to display.

• Error of the bad image when opening certain programs such as iTunes and Avast

  I have a computer that is running Windows XP and I recently had this problem occurs: when I try to open certain programs I installed (itunes, Avast, etc.) and a message appears saying 'bad image' followed by the name of the program. He also says to check the Setup disk. I really want to get this problem finally fixed. This computer was given to me without any software of anything. I would be very happy if it can be fixed.

  Sincerely,

  Austin Noll

  Well, all I can just anti-malware analysis...

  http://www.Malwarebytes.org/

  But you really want to get your hands on these CD, just in case.

  --
  Gina Whipp
  Microsoft MVP (access)

  Please post all responses on the forum where everyone can enjoy.

• I get the 'BAD IMAGE' when many *.exe files is available. The error image refers to "BROWSE ~ .dll." What is the correct file name?

  When I type (OK) the computer continues to the application, I entered, but there may be a range
  in the opinion of the 'BAD IMAGE' with various. EXE files. Somehow gotten past as the correct file name cut short
  what he should ever TRAVEL ~ .dll. I can rename it leaving out the "~" symbol, but I don't know what to rename it.
  Help?

  Hello

  It would be useful to the Windows OS is supported .

• Error message: "ActiveMovie window: wlmail.exe - bad image", when you open an email from Facebook

  I use Windows Live Mail. When I opened an e-mail from Facebook, I get the following error... Title: "ActiveMovie window: wlmail.exe - bad image" content: "C:\Program Files\Common Sonic Shared\SonicMC01\sonicamrd.ax is not designed to run on Windows or it contains and error.» Try to install the program by using the original installation media or contact your system administrator or support software provider. "Your help is appreciated.

  Hello

  You can check out the following link and check if it helps:

  http://windowslivehelp.com/thread.aspx?ThreadId=3c598313-736a-4503-bde7-4c5f4a1d9f9e

  You can also post the question in the Windows Live Forum for assistance:

  Support for Windows Live Mail

  Hope this information is useful.

• Chrome, not loading images when the site is online... the charge very well when working locally

  Hi, I'm working on a fairly simple site - basically just a series of images on the page, without effects, etc. Images of care very well when tested on chrome locally, but once the site is online, they do not load. see here for example

  Well seems to work on other browsers.

  Thanks for the help!

  Sorry, nevermind, seems to have suddenly started working on his own.

• When I try to send an e-mail with AOL, I get this error: "bad SMTP to the host.

  I get this message every time I try to send an e-mail to a recipient who has AOL.

  I know what SMTP, but this what/who is the host? Is my server or the server of the recipient?

  How can I solve this problem?

  original title: bad SMTP to the host

  Hi John Benzon.

  You must contact the Support of AOL for assistance on this issue.

  Contact AOL Customer Service

  http://help.AOL.com/help/microsites/search.do?cmd=displayKC&externalID=217480

   

  AOL Mail

  http://help.AOL.com/help/product/aol_webmail/

  I hope this helps.