Error: Bluetooth + WIFI works within the same radio frequency
When the wirelessLAN is open and then press Fn to open bluetooth this error pops up, please help me to solve this
ERROR:
Opearte to device Bluetooth (TM) and wirelessLAN in the same radio frequency range and may interfere with each other.
If you use bluetooth and wireless LAN devices at the same time you occasinally network performance optimal experience or even lose your network connection. In this case always stop your operation of LAn wireless or bluetooth.
Hi mate
It is simply to solve. You must use the BT or Wlan.
So, if you use BT connection, please turn off the WiFi and if you use Wlan, then disable the BT
In order to disable the WiFi or BT please use the Fn + F8 key combination you press this several times until the option has been disabled.
Tags: Toshiba
Similar Questions
-
BT and WLAN works within the same radio frequency range?
Damage Bluetooth and wireless LAN operated in the same frequency range and may interfere with each other
I do what is not your problem, but the fact is that you can use both devices at the same time. And it works perfectly.
Just for example: I hear web radio, use a BT headset and my laptop is connected to WIFI. No problem at all. -
Satellite C660-1me - bluetooth & Wlan operate within the same radio frequency
My alptop is Satellite C660-1me
I downloaded all the drivers from the toshiba site, today only a window appeared, says the following:+ bluetooth and lan devices operating in the same range of radio frequency wireless and may interfere with one another.
Can u please help to figrue the problem and solve it.
Thank you very much
Hello
This isn't a problem, but it is a simple system reviews.
This means that your WLan works according to the same frequency as Bluetooth.
Usually the 802. 11 B and G WLan standard using the 2.4 GHz and this frequency is also used by Bluetooth
So if you use WiFi, disable the BT NOT to use two devices at the same time!
-
Tecra M6-EZ6612: Bluetooth and WLan operate at the same radio frequency range
Hi all
I have a laptop that is Tecra M6-EZ6612...
I have a problem that when I install the bluetooth I have a massege indicating a conflict between the wireless and bluetooth...Two of them are working in the same radio frequency range!
So, I wonder how I can change the frequency range of the bluetooth device? !!!Not like about it. Material Bluetooth v1.2 or v2.0 have included technology called AFH = "Adaptive Frequency Hopping" that tries to avoid conflict with WLAN. It can only be a problem if you have a very old hardware BT (before 2004).
-
Replying to a virtual machine within the same site
I try to install vSphere replication v5.1. I do this without SRM, but just the OVF appliance (s). We currently have 8 guests distributed between two groups. We have a vCenter control all this, and all is listed in a Data Center. The second group is in our DR site and has different storage mapped to it. I try to use vSphere replication as a means to keep our important VM replicated to our centre of DR disaster. Is it possible to do so in the only current configuration?
I'm having a hard time comes to work. I have deployed two replication OVF devices and I'm stuck trying to replicate a virtual machine actually. It gives me an error that the data object is not found. I thought that I needed to 'Connect' from the local site to the remote site, but since this is all a time installing vCenter, I get an error indicating it cannot connect to itself.
Is what I'm trying to do possible? If not, could you let me know what I need to change to make it work properly. Thank you.
Hello
The scenario you describe is supported - you can replicate virtual machines from one host to another within the same VC.
To do this:
-you will need to deploy vSphere 5.1 replication for a VC and no specific host
-VR requires VC 5.1. If you liked VC - standalone VR will not work. If you have more recent VC, for example 5.5, you need RV 5.5
-For replication within the VC even you don't need to link to the target site.
-Simply select the computer virtual you want to replicate, when you opened a session in vSphere Web Client connected to the VC, point to the same location - must be available in the list, and select the appropriate data store and move through the wizard.
Kind regards
-Martin
-
check another computer internet history if both work on the same router?
check another computer internet history if both work on the same router?
Hello
There are two ways to access the files between computers in the same network or group work and sharing.(1) if the files and folders specified are shared within the same workgropup.For reference:Share files with anyone(2) you can take remote access of the other computer and check for the files and folders specified on the other computer.For reference:Remote Desktop connectionRemote Desktop connection: frequently asked questionsHope this information helps. -
Link chart action for refreshing a report of region within the same page
Gurus of the APEX
As long as we have the graph and report region region on the same page and based on the action of graph link must be able to refresh the report region within the same page
for example: I expense spend by category such as a pie chart and on the link of the action of which I want to refresh a report region by the right of it (in the same page) to show the details contained in this category spend - also I do not have to réactualisiez around the same page, just to refresh the region related to the category Click on the graph
Any help would be great on this - I use APEX 4.2
Thank you
Shas
Thanks Tom / Scott - sound now worked
Following my code for the javascript function in the page section,
function clickPie (pID) {}
$x('P4_ITEM_CATEGORY').value = pID;
$('#CategoryDetailsDD').trigger ('apexrefresh');
}
And here is my URL of the link graphic action section
JavaScript:clickPie("#label#")
-
Peut funtion Vmotion and Storage Vmotion with Intel and AMD hosts within the same cluster
Hi, I can do storage Vmotion OR Vmotion between Intel and AMD hosts within the same group?
Thank you
No, it is not possible to vmotion or storage vmotion between CPUs from different manufacturers - I heard rumors that two manufacturers are working on technology that will help in the future-
If you find this or any other answer useful please consider awarding points marking the answer correct or useful
-
Error message during registration in the same offering
Our catalog is built with offers that have a certain number of classes under them. These classes contain the same content, but they are held weekly (start and end dates per week).
Our problem is that the learner can get schooled in the same course/offering twice (but different classes) - two different weeks. Is it possible to configure the system to warn that the learner has already participated in the offer? (Workflow? or are there at - it an easier way)
I know that an error message appears if the learner is enrolled in the same class twice, but not in the same offering.
See you soon,.
BernardStandard features do not prevent enroll you a student more than once on different classes within the same offering. I think that any solutioon should be a customization.
The type of solution you can consider will depend on your appetite for customization.
If you want a basic solution, which will not prevent the second entry, but it will highlight, you could look at developing an alert or report. Both these soultions are "after the fact", but at least identify what happened and let you take measures to correct it.
Another suggestion is to use the OA framework and expand a display on the registration screens object to identify people already registered in a class in the same offering.
Hope these ideas help.
Concerning
Tim
P.S. You seem to have duplicated this message several times!
-
I just installed an airport extreme router and WiFi works, but the status light still flashes.
Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.
for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...
Without our crystal ball, we do not know what is the issue.
-
Every night of Ubuntu does not connect (crashes and doesn't stop not withouyt one kill pkill or root) with Ubuntu 11.10 and the recent 3.0.0 - 17-generic kernel
11.0 Firefox still works in the same kernel version and I use it now. The source of the problem is perhaps the core Ubuntu since 3.0.0 - 16 core gave no problem
Hello
Please also check if this happens in a new profile. If the new profile is correct, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings in a different location (folder profile) separated from its files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).
You may also be able to find useful info here.
-
He wants also to have a separate e-mail address which will also work on the same high-speed at home, but for the moment, that his laptop keeps not connect and say there are incompatibility of network security key. How can I sort these things? Thank you
You will need to create a homegroup. This link helped me to install on my 2 computers at home.
http://Windows.Microsoft.com/en-us/Windows7/join-a-HomeGroup
-
We are two developers working on the same .uir at the same time. Y at - it all the tools that would allow us to merge our own changes? If not, is there a way to avoid us to make changes at the same time.
For now we are only two, so the problem could easily be fixed by talking or other shipping when the changes should be applied. In any case, I would like to know the right way to work to ignore this issue.
Thank you!
Enjoying a beautiful UIR: Options / Save in Text Format...
-
Keboard and Touchpad 355 G2: Does not work at the same time
Hello
I am trying to configure my laptop for games, but I can't get my touchpad and keyboard work at the same time. I tried to disable palmcheck but that did not work. Anything else I could do?
Thank you
Hello
Normally, you just have to disable SmartSense or PalmCheck Control Panel of Synaptics - but from what I've seen, it seems no longer works for Windows 10 versions of this driver.
You too, can be able to work around this problem as follows.
First, download the Synaptics driver on the link below and save it in your downloads folder.
Version of the Synaptics 17.0.18.8 driver
Disable your wireless card (should be f12 ).
Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.
When finished, restart the laptop.
When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.
Open the Synaptics settings panel, disable SmartSense or PalmCheck , then check if the touchpad works now with a key on the keyboard is pressed.
If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.
https://support.Microsoft.com/en-GB/KB/3073930
Kind regards
DP - K
Note: If it does not, your existing driver are here.
-
How to put in place two sound devices and make two of them work at the same time?
I am on Windows 7 Ultimate and I have a problem...
I downloaded the SRS Audio Essentials software that improves the sound quality
And I have Realtek audio device which is an audio driver that come with bulit in sound card
But the problem is that I can choose only one of them as the default audio device
When I was with Windows Xp, two of them worked at the same time...
He is the captain:
http://www.Flickr.com/photos/96392754@N07/8812378555/
Help, please!
PS: Sorry for my bad English... ^_^
Hello
Unfortunately this does happen, as it is by design,
Here, a single device can be marked as default device, follow these steps below for more information.
a. Click Start, type Sound in the box to start the search.
b. click sound in the results of search at the top of the start menu.
c. click the reading notice the check mark next to the default device.For all windows questions do not hesitate to contact us and we will be happy to help you.
Maybe you are looking for
-
More Web site use flash player. I can not download the flash player.Now I use Firefox on Samsung Tablet called tab S
-
I have an iPhone 6, I have a little more than a year. There are no cracks or damage to the phone, but it won't let me use all the functions of the screen itself. "Home" button works. And Sir. I tried to restart. But it does not always allow me to use
-
Satellite l.660-106 with Windows 7 has stopped booting upward
My l.660 was for a long time, yesterday, during which he downloaded the updates of Windows. This morning, it wouldn't boot. Unfortunately, I have not prepared recovery disc and do not have the disc of Windows 7 computer was purchased with the system
-
How to save a bookmark all tabs open as bookmarks
If I have anumber of tabs open - how can I save the in the folder of a bookmarks without saving each of them individually?
-
a window also appears asking me to insert a blank cd that ive repeatedly with the same result... also used 2 different drands of blank CD