Error BSOD needs help

Similar Questions

• to start installation of creative cloud moves a little but then it stops and it says error copying a significant repertoire, 43 key error, I need help I want to install the trial version of adobe first pro, I use a pc windows ultimate

  key error 43, I need help I want to install the trial version of adobe first pro, I use a pc windows ultimate

  Error 43 https://forums.adobe.com/thread/2070909

  Also, is your Windows version required 64-bit?

  -http://windows.microsoft.com/en-AU/windows7/find-out-32-or-64-bit

• Sony A77 camera error. Need help.

  I've been using A77 almost 3 years without a single problem. Today while taking pictures with sony 100 mm macro I got this error "error of the camera". I changed the Sigma 50 mm F1.4 lens. I noticed that by changing the F stop at nothing else F1.4 gave the "camera error". "» I need help do specifically, I'm in Cairo, in Egypt.

  The rebel salvation,

  Welcome to the community of Sony!

  Sorry to hear about the situation and that you get error messages when you use the camera. You can try to solve the problem by doing a power reset. Please, turn off the power and remove the battery. The camera for 30 seconds. Disable so new and reinsert the battery. Check whether the problem is resolved.

  If this isn't the case, service may be required for your camera. To get help, please recommend to visit our Sony Global Web site for more information on contacting Sony's Support Center in your area at http://www.sony.net/SonyInfo/Support/.

  If my post answered your question, please mark it as "Accept as Solution" Thanks_Mitch

• BSOD: Need help! minidmp are displayed.

  Got a new Dell OptiPlex 3020 unpacking running Windows 7 Professional 64 bit intel i5 processor and 8 GB of RAM.  Summer do BSOD intermittently.  Is the software that I have loaded here until this latest versions of adobe reader and flash, Microsoft office, Google Chrome, 32-bit Java 7u25 (web application that I use is a little weird with 64 bit javas and any version greater than 7u25) and Symantec Endpoint Protection 12.1.4.

  3 separate proceedings with a different bug check code.

  1. 0 x 00000018

  2 0x0000001e

  (2) is caused by BHDrvx64.sys (which leads me to believe that it is something with Symantec Endpoint Protection, because I think that it is a driver of Symantec)

  the other is caused by ntoskrnl.exe

  Any help would be appreciated.

  Here are links to dmp files:

  http://1drv.Ms/1xtroEQ

  http://1drv.Ms/1xtrtZ8

  Thank you

  TL

  2 different errors, both probably related to Symantec as you did (in my humble OPINION it is rubbish).  I would Verifier to confirm that Symantec is the question of

  These accidents were related to the corruption of memory (probably caused by a driver).

  Run these two tests to check your memory and find which driver is causing the problem.  Please run first check
  

  If you are overclocking anything reset by default before running these tests.
  In other words STOP!

  If you don't know what it means that you're probably not

  
  

  
  1-Driver Verifier (for full instructions, see our wiki here)

  2-Memtest. (You can learn more about running memtest here)

  
  

  
  

• BSOD-need help solve the problem.

  Hi, my computer just BSOD would for the first time and I have the analysis of the dmp file, can someone tell me the problem and how to solve?

  Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com)
  Online Crash Dump Analysis Service
  See http://www.osronline.com for more information
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
  Product: WinNt, suite: TerminalServer SingleUserTS Personal
  Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
  Machine Name:
  Kernel base = 0xfffff800`03008000 PsLoadedModuleList = 0xfffff800`0324b890
  Debug session time: Fri Oct  3 19:15:42.940 2014 (UTC - 4:00)
  System Uptime: 2 days 19:08:57.924
  *******************************************************************************
  *                                                                             *
  *                        Bugcheck Analysis                                    *
  *                                                                             *
  *******************************************************************************
  
  NTFS_FILE_SYSTEM (24)
      If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
      parameters are the exception record and context record. Do a .cxr
      on the 3rd parameter and then kb to obtain a more informative stack
      trace.
  Arguments:
  Arg1: 00000000001904fb
  Arg2: fffff8800c77b558
  Arg3: fffff8800c77adb0
  Arg4: fffff8000303d7a1
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  EXCEPTION_RECORD:  fffff8800c77b558 -- (.exr 0xfffff8800c77b558)
  ExceptionAddress: fffff8000303d7a1 (nt!FsRtlUninitializeFileLock+0x0000000000000011)
     ExceptionCode: c0000005 (Access violation)
    ExceptionFlags: 00000000
  NumberParameters: 2
     Parameter[0]: 0000000000000000
     Parameter[1]: 0000000800000018
  Attempt to read from address 0000000800000018
  
  CONTEXT:  fffff8800c77adb0 -- (.cxr 0xfffff8800c77adb0)
  rax=fffff8a0113fed40 rbx=0000000800000000 rcx=0000000800000000
  rdx=fffff8a0113feb70 rsi=0000000000000705 rdi=0000000000000705
  rip=fffff8000303d7a1 rsp=fffff8800c77b790 rbp=0000000000000706
   r8=0000000000000000  r9=0000000000000000 r10=fffff8a0113feb40
  r11=fffff8a0113fec70 r12=0000000000000000 r13=0000000000000000
  r14=0000000000000000 r15=fffff8a0113feed8
  iopl=0         nv up ei ng nz na po nc
  cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
  nt!FsRtlUninitializeFileLock+0x11:
  fffff800`0303d7a1 488b6918        mov     rbp,qword ptr [rcx+18h] ds:002b:00000008`00000018=????????????????
  Resetting default scope
  
  CUSTOMER_CRASH_COUNT:  1
  
  DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
  
  PROCESS_NAME:  System
  
  CURRENT_IRQL:  0
  
  ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
  
  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
  
  EXCEPTION_PARAMETER1:  0000000000000000
  
  EXCEPTION_PARAMETER2:  0000000800000018
  
  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032b5100
  GetUlongFromAddress: unable to read from fffff800032b51c0
   0000000800000018 Nonpaged pool
  
  FOLLOWUP_IP:
  Ntfs!NtfsDeleteScb+240
  fffff880`012c6a70 e972feffff      jmp     Ntfs!NtfsDeleteScb+0xb7 (fffff880`012c68e7)
  
  FAULTING_IP:
  nt!FsRtlUninitializeFileLock+11
  fffff800`0303d7a1 488b6918        mov     rbp,qword ptr [rcx+18h]
  
  BUGCHECK_STR:  0x24
  
  LAST_CONTROL_TRANSFER:  from fffff800030c6b7e to fffff8000303d7a1
  
  STACK_TEXT:
  fffff880`0c77b790 fffff800`030c6b7e : fffffa80`6666744e fffffa80`000003ab fffff8a0`113feed8 00000000`00000000 : nt!FsRtlUninitializeFileLock+0x11
  fffff880`0c77b830 fffff880`012c6a70 : fffff880`0c77b8e8 fffff880`0c77b8e8 00000000`00000705 00000000`00000705 : nt!FsRtlFreeFileLock+0xe
  fffff880`0c77b860 fffff880`012cacdb : 00000000`01010000 fffff8a0`113feb70 00000000`00000000 fffffa80`00000028 : Ntfs!NtfsDeleteScb+0x240
  fffff880`0c77b8a0 fffff880`01244343 : fffff8a0`114bcb60 fffff8a0`113fec70 00000000`00000000 fffff880`0c77ba12 : Ntfs!NtfsRemoveScb+0x5b
  fffff880`0c77b8e0 fffff880`012c8a3c : fffff8a0`113feb40 fffff800`03223280 fffff880`0c77ba12 fffffa80`145e1570 : Ntfs!NtfsPrepareFcbForRemoval+0x53
  fffff880`0c77b910 fffff880`0124ba52 : fffffa80`145e1570 fffffa80`145e1570 fffff8a0`113feb40 fffff880`0c77ba00 : Ntfs!NtfsTeardownStructures+0xdc
  fffff880`0c77b990 fffff880`012d82d3 : fffffa80`0fa2f180 fffff800`03223280 fffff8a0`6366744e 00000000`00000009 : Ntfs!NtfsDecrementCloseCounts+0xa2
  fffff880`0c77b9d0 fffff880`0132ad32 : fffffa80`145e1570 fffff8a0`113fec70 fffff8a0`113feb40 fffffa80`0fa2f180 : Ntfs!NtfsCommonClose+0x353
  fffff880`0c77baa0 fffff800`03087261 : 00000000`00000000 fffff800`03374c01 fffffa80`169e8b00 00000000`00000002 : Ntfs!NtfsFspCloseInternal+0x186
  fffff880`0c77bb70 fffff800`0331973a : 00000000`00000000 fffffa80`169e8b50 00000000`00000080 fffffa80`0ca715a0 : nt!ExpWorkerThread+0x111
  fffff880`0c77bc00 fffff800`0306e8e6 : fffff880`02f65180 fffffa80`169e8b50 fffffa80`15f64640 00000000`00000246 : nt!PspSystemThreadStartup+0x5a
  fffff880`0c77bc40 00000000`00000000 : fffff880`0c77c000 fffff880`0c776000 fffff880`0c77b8a0 00000000`00000000 : nt!KxStartSystemThread+0x16
  
  SYMBOL_STACK_INDEX:  2
  
  SYMBOL_NAME:  Ntfs!NtfsDeleteScb+240
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: Ntfs
  
  IMAGE_NAME:  Ntfs.sys
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  52e1be8a
  
  STACK_COMMAND:  .cxr 0xfffff8800c77adb0 ; kb
  
  FAILURE_BUCKET_ID:  X64_0x24_Ntfs!NtfsDeleteScb+240
  
  BUCKET_ID:  X64_0x24_Ntfs!NtfsDeleteScb+240
  
  Followup: MachineOwner
  ---------
  

  Great, keep me updated on the situation of the accident and let me know if it worked.

  Kind regards

  Patrick

• BSOD, need help

  Hi all

  OK, so I've had my PC for over a year and have never had any problems with it. Recently, some new drivers are released for ATI - specifically, the drivers beta 13.9 and 13.11. When I updated, I started having BSOD at irregular intervals. They would produce normally when you play, I watch a video with Skype, or sometimes when I tried to load a game.
  Extremely frustrating. Anyway, I tried a few things like removing new pilots and return to 'old'. However, the problem still persists.
  I thought: "ok, something is going seriously here." So I decided to format the C drive everything.
  When I reinstalled windows and installed the drivers the problem was still there. I noticed that my windows had problems trying to install updates.
  I reformatted again, but this time I did installed all ati drivers. I decided that I would let windows install all updates first. As a result the PC BSOD when installing updates. This occurred at least 3 - 4 times during installation, updates. Therefore, I think that the problem is something to with one of the Windows Update files.
  I ran disk for drive C auditor and all is well. I also ran a Windows Memory Diagnostic tool, everything was fine.
  Blue screen display:
  Empty the file 120113-7020 - 01.dmp

  Crash Time 12/01/2013 21:14:09

  Bug MEMORY_MANAGEMENT control chain

  0x0000001a bug check code

  Parameter 1 00000000'00041790

  Parameter 2 fffffa80'011ae760

  Parameter 3 00000000' 0000ffff

  Parameter 4 00000000 00000000'

  Caused by the driver ntoskrnl.exe

  Caused by the address ntoskrnl.exe + 75bc0

  Description NT Kernel & system files

  Operating system Microsoft® Windows® product names

  Company Microsoft Corporation

  Version 6.1.7601.18247 (win7sp1_gdr.130828 - 1532) file

  X 64 processor

  Crash address ntoskrnl.exe + 75bc0

  Path of the C:\Windows\Minidump\120113-7020-01.dmp file

  Processor number 4

  Major version 15

  Minor version 7601

  276 440 dump file size

  Empty file name 12/01/2013 21:14:44
  2nd set:
  "120113-7144 - 01.dmp 12/01/2013 11:45:40 0x000000d1 DRIVER_IRQL_NOT_LESS_OR_EQUAL 00000000 ' 00 c 30000 00000000'00000002 00000000'00000001 fffff800 ' 0365e5df ntoskrnl.exe ntoskrnl.exe + 75bc0 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7601.18247 (win7sp1_gdr.130828 - 1532) x 64 ntoskrnl.exe + 75bc0 C:\Windows\Minidump\120113-7144-01.dmp 4 15 7601 276 384 11:46:42 01/12/2013
  Other stuff:
  CPU: Intel I5 - 3570 k
  RAM: 8 GB
  GPU: AMD 7850
  MOBO - Gigabyte GA-Z77X-DH3
  PSU: 750W
  AVerMedia HD C985 game capture
  Any help would be greatly appreciated.
   

  No problem, as I said, this indicates defective RAM. Make sure that the RAM you replace by is compatible.

  Kind regards

  Patrick

• IV installed another drive hard, but in Device Manager it says offline, when I try to boot it says e/s error.i need help everytin.cant iv tried format the id really apreciate any help

  250 GB HARD disk installed but it is not recognized... device manag says its offline... doesn't I want to initialize it. said: IO error... impossible to format... tried so many things, even tried diskpart or cmd promt... no joy!   If any1 cud help id be greatfull Yes... oh ye also in Device Manager it has a circle with a red arrow facein down in... If dat help?

  IM so annoyed wit saying p.o.s.... Please help... tanx.

  If the utility of car manufacturers is unable to perform the test, it means that the drive has failed.

  Try it on another PC, see if it works it

• JavaScript error. Need help!

  Hello

  Since 2 weeks I have met Javascript errors when you start Dreamweaver CS6.

  1 one - while executing onLoad in BusinessCatalyst.htm, the following JavaScript error occurred: in the file 'BusinessCatalyst': bcinit is not defined.

  a 2nd - the following JavaScript error occurred: at line 17 of file "C:\Program Files\Adobe\Adobe Dreamweaver CS6\Configuration\Shared\BC\JS\bc_ui_utils.js": Mr. British Colombia has no property.

  I don't know what it means and how to solve it. I tried to delete the file cache and re - install the software, but that did not help. If anyone can guide me through the steps I have to take?

  Thanks in advance!

  Erik

  Try #4 JavaScript errors troubleshoot CIHI | Dreamweaver CS4, CS5, CS6, CS5.5

  Otherwise #12 could well be the go.

• Update error U44M1P7 need help with a real solution.

  Let me first say that I am a user of Adobe for a long time and use this creative cloud since may, 2012. A few days ago, I tried to download and install Pnotoshop CC. It downloads and installs, but must then update fails and gives the U44M1P7 error code. 2 adobe technicians tried to fix it, but they are as confused as I am. Jeff Wright proposed in accordance with the notice to http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html as Adobe just give the error code does not help. I tried to follow this, but for some reason any my Windows 7 Home Preimum 64 bit SP1 on a Dell 620 Intel i5/6 GB of RAM is not a

  • 64-bit Windows (XP, Vista, 7): Directory \Program files (x 86) \Common Files\Adobe\Installers. Or any directory Adobe\Installer in any directory that I can find in any case.

  I downloaded and installed Dreamweaver CC and it requires an update fails with the same error code. The CC of Dreamweaver and Photoshop CC ARE installed and seem to work. Yet all my CS6 products are always installed and up to date.

  Think this is limited to my PC, I tried to install the CC version on a laptop HP simular configuration with identical results.

  NOW, I see a lot of people have the same problems, I am, or at least it seems to be the same if this seems to be a larger problem than just my incompetence as an operator on computer or less work on dirt. I'm tender hand to the community that I know in my heart that someone has already solved this problem.

  If you please if you know what is happening and can bring a solution or something more informitive Adobe Advisor to check the logs, which do not seem to exist, if it please post and inform the rest of us.

  
  

  DouglasB

  Thanks to Texas photography

  On July 29 I installed CC extensions manager then discovered that I had to install Extension Manager CS6 to convert MXP ZXP file to install, FYI the reason practice only I can find the change in MXP to ZXP and not including the MXP in ExchamgeManager CC Converter seems to be that people will buy new extensions of the thought of Adobe Exchange their old extensions no longer work.

  After installing these Extension handlers and convert a couple of MXP ZXP and their installation, I thought that I would try to update my Adobe again. You know just to smile and laugh. I have tried to update on July 22, memory and still have errors. Well, lo and hold after you have installed the Extension managers, etc., updates to Dw, Ps and bridge to knit!

  Don't ask me why but all my Adobe programs are happy again and updated.

• VISA can process the framework? Why I got BFFF006B error? Need help!

  Hello

  I have a device that sends the message by RS232. But the message package is a bit different from normal operation. For example, if the message is FF 06 43 02 C1 - 02, the ninth bit in the first byte FF is set to 1 'and the rest of the bytes are the value ' 0'. To send the message to the device, I have to change the parity between 'bookmark' and 'space '. But how to receive this package of data with VISA? I use normal receive routine, he says that there is sampling error

  Is there someone me has similar problem? Thank you very much!

  Hello

  You can implement the ninth bit Protocol in LV, I use it all the time.

  In my system, the first byte is the ninth bit set and for all the other bytes the ninth is equal to zero. It looks like different to normal to the UART parity, so that you get a parity error.

  You can use parity 'Mark' and 'Space' to force the bit parity '1' or '0'. Send the first byte with a 'brand' parity and the remaining bytes with parity of 'the space '.

  Receiving the bytes with parity translates into a parity error. Just ignore this error.

  The downside is that you can not see the byte is the first byte. But in a test configuration, it works for me.

  Normally this kind of interface is managed by a microcontroller as the C 80 31.

  Kees

• PIXMA mp 280. It will not scan-error #214021. need help.

  It must be my old age. I was able to use the scanner once yesterday. today not to go! Maybe I should uninstall.i not know this procedure. I tried everything I know how. I am not a technician. I'm a photographer!

  E-mail address is removed from the privacy *.

  Hello

  I see that you are facing problems scanning with Canon pixma mp 280.

  My research I discovered that users have solved the problem by replacing the two ink cartridges.

  Here is a link that describes the "withdrawal of a printer:

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  However, it would be best to contact Canon for help.

  http://www.Canon.co.UK/support/

  I hope that helps!

  If you have questions about Windows please keep us informed.

• BSOD - need help :) .dmp file analysis

  Dump file:
  https://1drv.Ms/f/s! AsYeF_5YscTDgQmS-4MWCE1zNVvq

  Signature of the problem:

  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033

  More information about the problem:
  BCCode: 1000007e
  BCP1: FFFFFFFFC0000005
  BCP2: FFFFF88005678B7E
  BCP3: FFFFF880009FC558
  BCP4: FFFFF880009FBDB0
  OS version: 6_1_7601
  Service Pack: 1_0
  Product: 256_1

  Files helping to describe the problem:
  C:\Windows\Minidump\062916-4290-01.dmp
  C:\Users\admin\AppData\Local\Temp\WER-45895-0.SysData.XML

  Read our privacy statement online:
  http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\system32\en-US\erofflps.txt

  Thanks for the help!

  This one is very good

  Related to the Extensible Atheros athr.sys wireless device driver.

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• DLL error. Need help please.

  I receive the following message if poster every time I turn on my computer.  Can someone tell me how to fix this error DLL?  Thank you, Bob

  

  Well the image I posted above does not come more.

  I unchecked a box on the request of sysinternals that had 'Qjtion' and "NDISAPI.dll" in it.

  Other then that, I have no idea what I did, but it seems to have worked.  I hope that I present another problem that has not yet shown.

  I can easily turn it back on by placing a check mark in the box.

  Did turn off the dll that was causing a problem?  You think it's a virus?  Although my 3 virus checkers game kept saying I had no virus.

  Bob

  Bob,

  I'm not sure it's Malware. But now disabled for now is a good idea, as a result of an in-depth analysis.

• TypeError: Error #1009 - need help

  Hello

  I'm working on a school project, which means that I am still fairly new to AS3.
  
  I receive the error 1009 which seems to point to the section of the problematic "theory." I checked my instance names & label many times everything seems fine. What else can it be?

  ----------

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at Untitled_fla::MainTimeline/frame70()

  ----------

  Buttons fade during the 5 images... so they are onstage but invisible from frame 65 and 70 frame, they are in the same spot and completely visible and supposed to be functional.

  I have the actionscript code on a layer separately on the frame of 70, that's what I -.

  ----------

  Stop();

  theory_btn.addEventListener (MouseEvent.Click, playtheory);

  function playtheory(event:MouseEvent):void {}
  gotoAndPlay ("theory");
  }

  history_btn.addEventListener (MouseEvent.Click, playhistory);

  function playhistory(event:MouseEvent):void {}
  gotoAndPlay ("history");
  }

  future_btn.addEventListener (MouseEvent.Click, playfuture);

  function playfuture(event:MouseEvent):void {}
  gotoAndPlay ("future");
  }

  credits_btn.addEventListener (MouseEvent.Click, playcredits);

  function playcredits(event:MouseEvent):void {}
  gotoAndPlay ("credits");
  }

  ----------

  I checked all my mulitple times - all label names and instances are correct and in their own place... Unless it's a mistake obvious mindblowingly and I'm simply not catch.

  I want to download my .fla, but it's too big of a file. I'll happily send it if someone is willing to take a look.

  I could be wrong, but to the original problem, I'm guessing that what follows from what I listed was the problem...

  -is animated in place, but is not assigned the name of the instances of each keyframe for her

  You said 70 frame is where alpha = 1, which has me thinking of you the animated view, but doesn't have their name in the first image (s).  That the absence of a name will get inherited to the other end of the Tween.

  For your new problem, if your home page is on frame of 75, and your code for the home button is on frame 76, you have to stop at frame 76 for the code must be assigned, otherwise, go to another frame it will leave without that code is assigned to the home button.

  What you can do, is have the button home and its code in the frame of 75, but make it invisible it and turn it in your function else for the other buttons, visible.

  I tried to show the code, but the editor is playing games and deletion of stuff about me that I add.

• Syntax error - desparate need help!

  On my memory stick, I have a file of records, which today as I tried to open them have symbols as their name, are not those that I named the and he tells me that the folders are empty. I know that they are not and I have not received any message yesterday when using the memory stick he had problems. This issue is incredibly important and complete the work of graduation from the University. I would be so appreciative of any assistance or any way to recover all my files and their content.

  When I try to open the files, it reads; "The file name, directory name or volume label syntax is incorrect'f"

  Hello

  · Do you remember all the recent changes on the computer before the show?

  Try the methods below:

  Method 1:

  Scan Virus online on the memory stick and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://onecare.live.com/site/en-us/default.htm

  Method 2:

  Try to access the memory stick from another computer and check the results.