error c0000034 fatal application update 84450 255 operations
the right solution for the error of tis please
Your computer may freeze or restart to a black screen that has a "0xc0000034" error message after installing Windows 7 Service Pack 1
http://support.Microsoft.com/kb/975484>
UTC/GMT is 08:52 Wednesday, September 7, 2011
Tags: Windows
Similar Questions
-
While improving a W7 x86_64 installation in VirtualBox, virtual machine crashed (not associate Windows) after the update has been downloaded and installed, but before stopping and restarting.
Now I get "fatal error C0000034 applying the update 117809 (_00000...) 282 operation" error every time I start up the virtual machine. Startup Repair and Safe Mode, last good known Configuration did not help (impossible to find problems, suspended and hung respectively). I believe that I have also disabled the system restore.
If I not mistaken, the vm crash caused the installation of MS in missing a step that was supposed to be done so that the closing.
Help me!
The Solution: -
W2012 R2 "error C0000034 application update operation 432439 7.
Have Server R2 2012 Windows that displays "error C0000034 application update operation 432439 7" at startup.
Also happens in safe mode.
Any suggestions?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
BlackBerry Smartphones Blackberry Curve 8330 - fatal error during the Application Loader
Using the Desktop Manager V5.0
When I connect my BB 8330 to my PC (USB connection) the Application window updates appears showing me all the new update, I click on the task updated current opens, then the Update Summary window, showing all updates to do, they are all 4.5.0 updates, click Next. Task progress window open once again, 11 task first 3 are fine on my BB, just complete backup 4th task is "Connecting to device ROM", at this point, it appears that even if my BB is turned off or rebooted, the task bar says "Connecting to the boot ROM", my BB business if it's rebooting , spinning hourglass, then I get the notorious "a fatal error has occurred." by updating the software on your device, please try again on the Desktop Manager
At this point my BB is finally coming back to the main screen as if it were able to tap new. My Desktop Manager does not see that my BB is more connected and I need to stop and restart my PC to connect my BB for the Manager of office again.
I hope this was enough detail, does anyone have an idea how to get by this error? What he does when he tries to connect to the rom of the device? Why it looks like it turned off my BB?
Any help would be greatly appreciated
Hello!
Here's a knockout who deals with this error:
- KB02696 "Could not complete the load operation. Fatal error occurred during the update of pocket"error displayed when you try to reload the software on a BlackBerry smartphone
I hope that it contains something useful!
Good luck and let us know!
-
Updated several CC applications last week now none of the applications update opens. I get a message that MSVCR110.dll is missing. Can I get a U44M1P7 error code. Any ideas?
Missing DLL https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html can help
or full Win10 DURATION https://www.microsoft.com/en-au/download/confirmation.aspx?id=30679
U44... Update error http://forums.adobe.com/thread/1289956 can help
-
Acer iconia a b3 - a30 errors after the system update
Hi my Tablet conducted an update of the system. Everything is fine, but now I get errors for the portal app Acer and Opera app unexpected error please reboot if I restart the app it crashes again.
Also is it possible to change ro_debuggable to 1, so I can use root adb shell thank you
Robb
Hi Robb,
In regards to the error continues to Acer portal on your Acer device, I suggest that you can try to uninstall Acer Portal updates and reinstall by downloading the Acer Android portal according to its online help.
If the problem persists, I will really appreciate if you could provide us with more information below. Thank you!
- Please send your comments via the portal Acer Acer BYOC applications support.
- Please capture that a screenshot of the error message occurs on the Acer site and we send it to the best solution.
Acer BYOC Apps support
-
Adobe Flash Player 11 & IE
I am running Windows XP SP3 32 bit. IE8 and 2 user accounts with permissions of system administrator. Flash Player 10 has worked well. Delete us all the temporary files, internet history & cache. I have uninstalled all previous versions & tried to install the lateset version. When you try to download Flash Player 11 error msg vary between 'General error' or ' cannot be updated (filename) ' or we do not have the necessary permission. Now he tells me that it cannot be saved. When it works it will download on 1 user account but the 2nd a/c cannot access applications require a PS to run. older versions cannot be re installed. Tried all the suggestions in the forum. Have tried a few weeks to understand it, but I'm stuck now. Help, please.Hi, Robert,.
Try uninstalling Flash Player using the uninstaller here. Sometimes, there remains remnants of previous installations.
http://kb2.Adobe.com/CPS/141/tn_14157.html
Restart the computer
Reinstall the software after you have cleaned the file cache as described below
http://www.Adobe.com/FlashPlatform/?promoid=ITXQR
Open the command prompt window
Type the following commands by pressing enter after each one
Rundll32.exe inetcpl.cpl, ClearMyTracksByProcess 8
Rundll32.exe inetcpl.cpl, ClearMyTracksByProcess 255
Rundll32.exe inetcpl.cpl, ClearMyTracksByProcess 32
Rundll32.exe inetcpl.cpl, ClearMyTracksByProcess 16
Rundll32.exe inetcpl.cpl, ClearMyTracksByProcess 2
Rundll32.exe inetcpl.cpl, ClearMyTracksByProcess 1
When you are finished with the above commands, type Exit and press ENTER to close the command prompt window. Reinstall Adobe Flash Player.
-
Original title: HP support assistant failed to install
After the update for hp support assistant failed I uninstalled, downloaded the update & tried to reinstall. It fails to install... network error 1316.A reading from the file c:\windows\installer\hp support assistant.msi. Setup restores the action with error - 1603 Fatal error during installation, see msi.chm or msdn for more information. Help!
HelloIs that the question is specific to HP support assistant?Method 1: Run the following fix - it:Solve problems with programs that cannot be installed or uninstalled:
Method 2: Verify that the Windows Installer service is set to automatic, to do this, follow these steps:a. Click Start, type services.msc in the search box and press ENTER.If you are prompted for an administrator password or for confirmation, type the password, or click on continue.b. in the list of Services, double-click Windows Installer.(c) in the properties of Windows Installer dialog box, click Automatic in the startup type list.d. click on start, click on apply and then click OK.e. start the installation of the software.Method 3: Unregister and register the Windows Setup program againSee the following steps:a. Click Start, type cmd in the dialog box, then right-click on command prompt and click Run as administratorb. in the command prompt, type the following command:"MSIEXEC /Unregister." without the quotes and then click OK.Note: Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass."MSIEXEC/REGSERVER" without the quotes and then click OK. After you run this command, the operation is complete.c. try to install the program and check if the problem persists. -
Behance plugin fails to publish on WIP in Lightroom 5.6. Returns the following error: "cannot download an update WIP on Behance: invalid permissions or request type. (I've also seen this question asked in the forums of Deutsche in January 2014 without answers)
In settings of Behance Adobe Photoshop Lightroom is authorized to:
- Revoke access
- can act on your behalf to comment, follow users, discover and appreciate the projects
- Allows access to read the flow of network activity
- Able to read collections you have marked as private
- Possibility to create, manipulate and remove your collections.
- Able to read current work marked as private
- Able to view, manipulate, and delete a work in progress on your behalf
Does anyone have a solution?
-System settings-
Lightroom version: 5.6 [974614]
Operating system: Windows 8.1 Business Edition
Version: 6.3 [9600]
Application architecture: x 64
System architecture: x 64
Number of logical processors: 8
Processor speed: 3.0 GHz
Built-in memory: 16301,9 MB
Real memory for Lightroom: 16301,9 MB
Real memory used by Lightroom: 374.4 MB (2.2%)
Virtual memory used by Lightroom: 346,3 MB
Size of the memory cache: 224,4 MB
Maximum thread count used by Camera Raw: 4
System DPI setting: 96 DPI
Composition of the Bureau enabled: Yes
Exhibition: 1) 2560 x 1440
Plugins installed:
(1) Behance
(2) substantive canon Plugin
(3) Costco Photo Center
(4) Facebook
(5) Flickr
(6) home Plugin Leica
(7) attachment Plugin Nikon
Config.LUA flags: None
Map #1: Vendor: 8086
Feature: 412
Subsystem: 5b 01028
Review: 6
Video memory: 0
Map #2: Seller: 10de
Feature: 4
Subsystem: 5b 01028
Revision: a1
Video memory: 7 c 1
Map #3: Seller: 1414
Device: 8 c
Subsystem: 0
Revision: 0
Video memory: 0
AudioDeviceIOBlockSize: 1024
AudioDeviceName: Speakers (Realtek High Definition Audio)
AudioDeviceNumberOfChannels: 2
AudioDeviceSampleRate: 44100
Build: not initialized
CardID: 1042
Direct2DEnabled: false
GPUDevice: D3D
MaxTexture2DSize: 8192
OGLEnabled: true
Renderer: Intel(r) HD Graphics 4600
ShaderModel: 11.1
Vendor: Intel
VendorID: 32902
Version: 8086:0412:5 b 01028:0006
-
670 error when installing the update for silverlight KB2416427
Original title: cannot install the update for silverlight KB2416427
- 670 error cannot install the update for silverlight KB2416427
Hi ithakiman,
1. which version of the operating system?
2. have you tried to install the update manually?
First try to install the update manually and check.
See the links to download the update below:
http://www.Microsoft.com/Silverlight/
Description of the update for Microsoft Silverlight: 28 September 2010
http://support.Microsoft.com/kb/2416427
Also you can post your question in the Silverlight forum for further assistance:
http://forums.Silverlight.NET/forums/13.aspx
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you thinkIf this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
On startup, I get the following error: spoolsv.exe - Application error
On startup, I get the following error:
Spoolsv.exe - Application error
The instruction at "0 x 10002837" referenced memory at "0x00000000". The memory could not be "written".Then the print subsystem stops. Windows update service keeps control and verification. I let go 20 hours and it is never resolved. I can't open some applications requiring printers. Help please.
Bill
Hello DragonBill,
Thank you for visiting the website of Microsoft Windows Vista Community.
Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL. These files are created by the spooler to save data delayed a print job. The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.
To try to correct the application spoolsv.exe error, you must remove these files from the system. To do this, perform the following steps on your Windows Vista computer:
1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .
2. in the Services management console, find the Spooler service, right-click on it and select stop.
3. then open the folder C:\Windows\System32\Spool\Printers . (Here, we assume that your Windows is installed in the default C:\Windows folder)
4. delete all the . SHD and SPL files in this folder.
5. then open the TMP folder and delete all the old, unused files in this folder.
6. Finally, restart the spooler from the Services management console service.
Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files. To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.
If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer. A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option. On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next. In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next. Finally, check and then click Next again to confirm your restore point and restore of the system. Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.
It is important that you know that application errors can also occur because of virus or spyware infections. In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker. Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.
Let us know if these steps solve your problem. I hope the information is useful.
Kind regards
Anthony
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
The error code is 'Windows Update error 80072ee2'. SO how to fix in a step-by-step fashion. I added the site proposed for the update in my antivirus while list.
Hi Sarma_RN,
1. When you receive the error message?
2. update you are trying to install?
3. When was the last time you were able to install updates?
If Windows Update, error 80072ee2 during updates, the Windows Update servers may experience an unusually high number of requests for updates. Close Windows Update, wait 10 to 15 minutes, and then run Windows Update again. Alternatively, you can wait for automatic update of Windows run at its next scheduled time.
These errors can occur caused by one of the following problems:
- Applications or processes that interfere with Internet communications
- Problems on your computer
- Strong Internet activity
- Recoverable database errors
See the Microsoft article and try the steps mentioned below.
You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates
http://support.Microsoft.com/kb/836941
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Windows cannot check the updates. Error 80070490 failed since 10/23/09. Windows Update will not work. I haves Windows Vista Home Premium SP2
0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: the "Windows features" dialog box is empty in Windows 7 or Windows Vista, or you receive an error message that includes the following code when you try to use Windows Update: "0 x 80073712".
http://support.Microsoft.com/kb/931712
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
I was using Window Vista Premum during more than 1 year. No problem so far to get auto updates window to update until the most recent update for Internet Explorer 8 has received in July 2009. Update failed with the message "WindowsUpdate_80070490" "WindowsUpdate_dt000"
I use the Antivirus NOD 32.2. No virus was detected so far.0 X 80070490 - ERROR_NOT_FOUND
Corrupted system file; You will need to perform an upgrade on the spot or reinstalling the operating system.The error you receive occurs if there is corruption in the manifest of component maintenance base.
Ignore the title: Some Windows Vista functions may not work, or Windows Vista may stop responding
http://support.Microsoft.com/kb/929833
"Explains the SFC / Scannow.A repair install is the usual solution of SFC/scannow does not work.
You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
http://support.Microsoft.com/kb/958044NB: If you have installed SP1 for Vistahttp://support.microsoft.com/kb/948537
Step 7 (method for Windows Vista), the * UPGRADE option is not available because SP1 has been installed.
Uninstall SP1
See also:
How to overcome error 0 x 80070490 when installing updates in Windows Vista/Server 2008
http://blogs.msdn.com/andrekl/archive/2008/09/29/how-to-overcome-error-0x80070490-when-installing-updates-in-Windows-Vista-Server-2008.aspxTaurArian [MVP] 2005-2010 - Update Services
-
0x8024400A error, cannot install Windows updates.
Original title: error cannot access windows update
0x8024400A error message
Hello
1. you have any application installed on the computer security?
2 did you a recent software or changes to the material on the computer?
I suggest you run the FIXIT from the link below and. You can also try other steps listed in this article.
Temporary connection related errors may occur when you use Windows Update or Microsoft Update
http://support.Microsoft.com/kb/836941
Hope this helps and keep us posted.
Maybe you are looking for
-
Will Firefox run on Apple iPhone or iPad
BONES of Will Firefox run on iPhone or iPad mini
-
Firefox can't open big PNG. Tried to open the PNG even in other browsers (IE/Chrome) without any problem. The PNG is served through a Web server. The initial error message could not open the image. I have reset and restarted firefox in safe mode and
-
Problem with CPU P620 - one or two core Win 8.1
I have OS 8.1 Enterprise x 86 Win. My CPUID is Intel (r) Pentium (r) CPU P6200 2.13 GHz. The Task Manager, software Specy, Everest and CPU - Z my CPU to see as a carrot. Please tell my why?I have HP ProBook 4520 s (XX760EA #BED)! Also, I can't find d
-
Hello I'm new to this forum. I have a 2nd hand X 220 for 3 months now, easily the best machine that I had never. I'm now intending to buy an another thinkpad and intend to spend my X 220 to my wife. I am interested in the T530, but in the images of t
-
I uninstalled by mistake my calendar gadget - how do I get it back? Thank you