Error: C00D11EF while using Windows Media Player to synchronize the iPod

Similar Questions

• In the error message is Vista "Windows Media Player cannot play the file, might not support the codec used to compress the file.

  It worked very well what place please?

  * original title - Window Media Player cannot drive cannot read the file the player could does not load the file or may not support or does not support the codec used to compress the fichier.*

  Hello

  1. what changes have been made to your computer before the problem?
  2. the problem occurs on a particular file?
  3. What is the format of the file you want to play in Windows Media Player?

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  WARNING OF THIRD PARTY SOFTWARE

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

• I keep getting out of memory errors when you use Windows Media Player.

  original title: of memory error

  Hi, I have a Windows 7 PC brand new with 12 GB of RAM, but I get low on errors of memory, especially when you use Windows Media Player. I tried:

  -Execution of the antivirus scans

  -Cleaning things out of the startup folder

  -Increase in the size of paging file

  I can't understand what the devil is the cause of this error - as I said, it's a new machine, and is not practically nothing on it yet.

  Any help is appreciated.

  Hello

  Follow these steps and check.

  (a) open 'command prompt' as an administrator (programs, accessories, right-click "command, prompt" run as administrator).

  (b) type the following without the quotes and press ENTER.

  "for %a in (% systemroot%\system32\wm*.dll) do regsvr32 /s %a.

• error message C00D1199 while using Windows Media Player

  I'm having a problem getting a video playback with video, that I took with my camera. I never used to have a problem and everything would be reading. Suddenly, no video would not play back and I only got an error message saying that the codec used to compress the file is not supported by Windows. I converted all the files and thought of AVI format that would help, but no luck. I tried to run the Microsoft Fix It and only made his return to some but not all the files. Others still play the error. Any help or advice would be greatly appreciated.

  Hi Marz_Y,

  (1) who fixit are you referring?

  (2) you are able to play recorded videos sample without any problem?

  You can follow the steps mentioned in the link below

  Windows Media Player C00D1199

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  (Procedure described in the above link applies to Windows Vista)

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ---------------------------------------------------------------------------------------------------------
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using Windows Media Player, I get the error: "the specified module could not be found" when I try to play a wave (.wav) file.

  I have re-installed sound edge card, updated the driver, checked that it is enabled in the bios. Play other types of sounds.

  Wave Systems sounds do not play either and everything by checking the sound scheme system sounds, (Panel > properties of sounds and audio devices > sounds tab) they don't play and the 'play' button is not enabled.

  Hi sureshotsd,

  · What version of Windows media player you have installed?

  · What is the service pack installed?

  · You receive an error with the error code?

  · Do you remember all the recent changes on the computer before the show?

  Follow the method below:

  Method 1:

  Create the new user on the computer account and check if you are able to play the file. You can check the link for the procedure to create the new user below account: how to create and configure user accounts in Windows XP:http://support.microsoft.com/kb/279783

  Go back with the results.

  Method 2:

  Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747

  Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker:http://support.microsoft.com/kb/900910 (valid for Service pack 3)

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using Windows Media Player to download the video in an Apple ITouch/IPod

  Help! Is it possible, using the 'Sync' feature to download video stored in Windows Media Player in an apple ITouch/IPod? I tried to create a playlist, and then using the synchronization function, but it doesn't seem to work. Help, please!

  Hi Yosimitesam36,

  Windows Media Player is not compatible with the iPod. You may need to purchase a plug-in to sync the IPod to your windows media player.

  Or you need to get help from Apple try to download iTunes from the IPod website:

  www.Apple.com/support/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Blue screen error 0x0000007F When using Windows Media Player

  original title: need help w/video

  my hp Pavilion a1240n crashed to the point that I had to replace the hard drive and reinstall windows xp, then go to 7.  After 2 1/2 weeks of the trial, I am still unable to play a dvd, or get a video game to play.  If anyone can help me, chk the specifications of what I have and give me some options on what I can try.  The last time I tried WMP, I received a stop message 0x0000007f blue screen.  Help!

  A few quick to test things:

  Test your memory with a memory tester. Something like http://www.memtest.org/ perhaps, or an equivalent.

  Update your graphics card and sound card drivers to the latest W7 drivers available at HP for your PC.

  As test, download and install (free) VLC. Can do this reading of videos? In a first time, as this is just a test, do not let 'take over' as a default player until / unless you're happy with it. Just manually open a video with her.

  If you look in what is your WEI score and the base system in detail, i.e. amount of version W7 ram, CPU, and what is your GPU card?

  Basic details of 7F - http://support.microsoft.com/kb/137539

  Armed with a little more information, a person may be able to help more.

• You received the C00D1199 error message using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  "You have received an error C00D1199 message while using Windows Media Player. The file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player. »

  The file audio im trying to open, a conference for a class I'm taking. Is there anyway that I can get the audio to play? program in windows media, itunes, quicktime player?

  Hello

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/C00D1199

  Note: This link implies also on Windows vista.

• Cannot manage libraries. Cannot retrieve CD using Windows Media Player 12, error '"Windows Media Player cannot find the file'

  Original title: WMP 12 won't fill the library, allow me to manage the libraries, or it is for me to rip music

  WMP 12 is unable to find my music files; When I select > Union > manage libraries > music (or any other library), nothing happens. If I try to extract a new music CD WMP will not let me select a location to store the file torn; If a test of tear, anyway, I get an error message saying WMP "Windows Media Player cannot find the file.

  Through the windows, I can see my music library and that it complements filled with many good things and play music that is then added to the library WMP one track at a time. But that bat rather point to WMP.

  I have added and deleted folders from the libraries of music, I used different hard drives, I used the store to library WMP and I installed and uninstalled and reinstalled WMP three times, I tried using WMP with and without Windows Media Center. Nothing helps. Any ideas?

  Hi Watford CVS,

  Try to enable and disable Windows Media Player and check the result.
  Step 1: Disable Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. uncheck Windows Media Player and click ok.
  d. restart the computer so that the changes take effect.

  Step 2: Turn on Windows Media Player
  a. Click Start, type optionalfeatures and press to enter.
  b. in the list of objects, expand multimedia functions.
  c. place a check on Windows Media Player, and then click ok.
  d. restart the computer so that the changes take effect.
  e. check if the problem persists.

  See Or turn off Windows features turn on

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message: "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. »

  Original title: problems of residential group after system recovery

  I started a homegroup on my computer.  I added another computer to the homegroup.  Everything worked fine until I had to perform a system recovery on the laptop that I used to start the homegroup.  I implemented the homegroup again, but I can't access the files on the other computer via Windows Media Player.  I get an error message that says "Windows Media Player cannot access the file. The file may be in use, you won't have access to the computer on which the file is stored, or your proxy settings are may not be incorrect. "I can access all the music files via Windows Explorer.  I have to start over with a new password?  Can I just create a new homegroup?  What other options do I have?  You can provide any help would be greatly appreciated.  Thank you.

  Hello

  Please follow the methods and check the issue:

  Method 1:

  Open the homegroup troubleshooting utility:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:

  Why can't I access my homegroup? :

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-access-my-HomeGroup

  For reference:

  Homegroup: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/HomeGroup-frequently-asked-questions

  Method 3:

  See the steps in "include a folder shared in a library" from the link below:

  Access to files and printers on other homegroup computers: http://Windows.Microsoft.com/is-is/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  I hope this helps.

• Error message: C00D0FAB - Windows Media Player cannot play the CD. The disc may be dirty or damaged.

  Original title: Windows media Player cannot read CD

  Media Player stops a minute after the start of play - error message is C00D0FAB - Windows Media Player cannot play the CD.  The disc may be dirty or damaged.  turn on error correction and then try again.  I did it and nothing seems to fix the problem.  I am able to burn a cd.  Can you help me?  Thank you

  Hi Point Mercer,

  1. were you able to read CDs via WMP before?

  2. are you face issues only with audio CDs?

  3. you remember to make changes to the computer before this problem?

  You can try to let flow the Fixit and see if it helps:

  Your CD or DVD drive cannot read or write media

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  You can also check to see if there are updates drivers\firmware update for the CD player available.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I try to use Windows Media Player 11 I get the message: Windows Media Player is not properly installed on windows vista

  Original title: MediaPlayer does not open. Followd Scout121 answr. Got the message: not recognized as int/ext control.  Help!

  I followed the directions for the question of Scout121, posted by Bikesh T 20 October 2011.  When I entered the "regsvr32vbscript.dll", I got the message: is not recognized as internal or external, command an executable program or batch file.

  We have Windows Vista Home Premium 32 bit version 6.0 (Build 6002: Service Pack 2).

  I received a validation code windows, but when I try to use Windows Media Player 11 but the message: Windows Media Player is not properly installed.   When I try to install the player form Microsoft Web site, I get the message that the installation has failed.

  Please notify.  We are clueless.  Thank you.

  Hello

  What troubleshooting steps you have done until now?

  Click on the link below and run the fixit.

  Method 1: Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic/

   

  Method 2: Disable Windows Media Player and then turn it on to Windows features and check if the problem persists.

  Disable and enable Windows Media Player and check if it opens.

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; clear the check box Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  Note: If windows media player is already disabled, follow the steps mentioned below:

  After the restart, follow these steps:

  (a) click Start and select Control Panel.

  (b) click on programs and features.

  (c) click on or turn off Windows features turn on on the left side.

  (d) develop the features of media; Check the Windows Media Player.

  (e) click Yes and OK to continue.

  (f) restart the computer.

  This would be re - install windows media player 12.

  See the link: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-features-on-or-off

  Method 3: Perform scan of SFC (System File Checker) and see if the problem persists.

  http://support.Microsoft.com/kb/929833

  Let us know the status of the issue.

• WMP has encountered an error while fire-"you met an error message when you use Windows Media Player".

  Original title: WMP has encountered an error when burning.  Check that the burner is connected properly and that the disc is clean and not damaged.

  I'm getting the above error message.  I tried at least 4 different drives and they are not the first discs I used this pack. also, I burned 30 + drives prior to receiving this message. When I click on the button "help", he says "you have encountered an error message when you use Windows Media Player.  Additional information is not currently available for this error. »

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  Open the troubleshooter in Windows Media Player settings, run and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

• C00D11C8 error message when you use Windows Media Player

  How to fix C00D11C8 error messages when you use Windows Media Player.

  I've recreated the error on another computer running the same level of the OS and SP but received a more explicit error message telling me to get the codex of GoToMeeting.

  I downloaded the GoToMeeting codex and the problem was solved.

• "Windows Media Player cannot burn the files to CD" error while burning a CD

  My Windows Media Player says "Windows Media Player cannot burn the files to the CD. Check that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs.  I have burned several CD from Windows Media Player in the last year.  I used different brands of CD, since I first saw this message, but it continues to give the same message.  Whenever the burner starts to burn, I get this message.  What is the problem?

  Thank you for answering my question.   I understood the question.  In the burning options, there is a tab file types.  For some reason the appropriate boxes are not selected.  The burning process has led me to believe that I had a problem of burner or CD, while he was in fact the options.  Thank you once again.