Error caused by the remote control?

Similar Questions

• Error step 7, creation of WebCenter, and schemas content using the remote control

  Hi all

  I have the installation of the portal WebCenter using JSK, but the failure of the process when it tries to create patterns using the remote, it shows "Time out when connecting to the database. The current values expires 30 seconds. "UCR-6090: jump main operation: validation stage of connection failure.

  This is the content of install_setup.log

  Thu Aug 14 10:12:32 CLT 2014: END STEP 6 22: Configurion of the database Instance

  Thu Aug 14 10:12:32 CLT 2014: START STEP 7 22: creation of the WebCenter and patterns content using the remote control. Estimated time is 1 minute. Please wait..

  localhost.localdomain:1521:ORCL

  Installation of patterns Begin spaces

  Please enter the password(User:sys) of the database:

  Processing of command line...

  Timeout connecting to the database. Current timeout value is 30 seconds.

  UCR-6090: jump main operation: validation step connection failure

  And the rcu.log

  14-08-2014 10:14:38.925 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.RCUCommandLineParser::process: processing command line...

  14-08-2014 10:14:38.927 NOTIFICATION rcu: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: from validations...

  14-08-2014 10:14:38.934 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (service_name = ORCL) (server = dedicated)))

  14-08-2014 10:15:39.250 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: unable to connect to database: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:15:39.250 NOTIFICATION rcu: oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine::connect: the connection to the database: user: sys, role: sysdba, connectString: (description = (address = (host = localhost.localdomain)(protocol=tcp) (port = 1521)) (connect_data = (sid = ORCL) (server = dedicated)))

  14-08-2014 10:16:39.192 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: timeout when connecting to the database. Current timeout value is 30 seconds.

  14-08-2014 10:16:39.192 rcu ERROR: oracle.sysman.assistants.rcu.backend.validation.StepValidator::isConnectionStepValidated: SQLFatalErrorException:

  oracle.sysman.assistants.common.dbutil.SQLFatalErrorException: timeout when connecting to the database. Current timeout value is 30 seconds.

  at oracle.sysman.assistants.common.dbutil.jdbc.JDBCEngine.connect(JDBCEngine.java:585)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:358)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.connectDatabase(StepValidator.java:253)

  at oracle.sysman.assistants.rcu.backend.validation.StepValidator.isConnectionStepValidated(StepValidator.java:1366)

  at oracle.sysman.assistants.rcu.backend.SilentRCUModel.performOperation(SilentRCUModel.java:140)

  at oracle.sysman.assistants.rcu.backend.RCUModel.startOperation(RCUModel.java:346)

  at oracle.sysman.assistants.rcu.Rcu.execute(Rcu.java:339)

  at oracle.sysman.assistants.rcu.Rcu.main(Rcu.java:363)

  2014-08-14 10:16:39.193 rcu ERROR: oracle.sysman.assistants.rcu.backend.SilentRCUModel::performOperation: UCR-6090: operation hand jump: validation step connection failure

  2014-08-14 10:16:39.193 NOTIFICATION rcu: oracle.sysman.assistants.common.util.SilentMessageHandler::writeToLog: UCR-6090: operation hand jump: validation step connection failure

  Any suggestions?

  Best regards!

  Hello

  (1) you see no error on the Setup screen? If Yes please download the screenshot?

  (2) the UCR is a failure because it is not able to connect to the database. Please make sure that you have entered the correct database details.

  Also, can you please try the following and check the box.

  Go to the location / / rcu/config /

  Take backup for the file rcu.properties, and then change the below

  JDBC_LOGIN_TIMEOUT = 30

  TO

  JDBC_LOGIN_TIMEOUT = 300

  and try again.

  Concerning

  Françoise

• If script running locally-make, if the remote control-do that

  Hi all

  need some advice on the best way to do it, don't know if it takes even a logic like that, I can be more thinking than he.

  Firstly a bit of background:

  I have a site clipbucket 2.6.  works very well on the remote control.  When I install with xampp on my personal computer errors being lifted from

  Call to undefined method ADODB_mysql::select()

  now, I found a fix for this on their site, it is to change a line in the code:

  need to 'adodb/adodb.inc.php ';

  something that will make reference to the file correctly in a local environment.  Some people suggest

  require ' / FULL PATH TO/adodb/adodb.inc.php ";

  but this does not work for me, I get an error of not being able to find the file, it turns out that this works only on wamp or XAMPP, I use xampp

  This is what works on my test server local xampp:

  need to 'C:\xampp\htdocs\videoz\includes\adodb\adodb.inc.php ';

  NOW MY QUESTION:

  need to 'C:\xampp\htdocs\videoz\includes\adodb\adodb.inc.php ';

  will not work on the remote control to reference the file correctly.

  How can I make a logic to decide if a script is running on local or remote and include a filepath as a result?

  If the file exist?

  the root of the server?

  suggestions?'

  ideas?

  is it still the right way to go on this subject?  I can't find a way for scructure include working with both, I disabled it to use variables in the include statements (regardless of its name), ha

  any suggestions on how to do this effectively and above all safely?

  Thanks a ton for your attention!

  You can do something like this:

  If ($_SERVER ['SERVER_NAME'] == 'mylittlehost') {}

  to do this

  } else {}

  do this

  }

  .. and Yes, to answer your question, it's a good way to go about it.

  Another way is to have an include with a set of functions, etc., which is for your local site and an inclusion of the same name which contains comparable functions for the remote site, but the day may come when you accidentally download your local version of the remote control, causing the remote site to break.

• HP Compaq 8000 Elite SFF: Some HP Windows Media Center buttons on the remote control does not

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  PainedByTech wrote:
  

  I have a desktop PC HP Compaq 8000 Elite SFF that I use as a home theater PC.  I'm under Windows Media Center with 2 cards tuner and antennae of the OTA.

  With this configuration, I use a HP Remote WMC.  The model No. inside the cover of the remote control battery is TSGH-IR01.  The issue I'm having with the remote control that is stationary and move forward and "back" button do nothing when you press.  The light at the top of the remote control flashes when you press those buttons, so I don't think that the buttons themselves infrared are failing.  All the other buttons on the remote work fine.

  I wonder if it is a problem of programming/software and if so, what should I do to solve this problem.   It's annoying to not be able to stop a recorded program is playing when you press the stop button, but having to use a mouse to do it instead.   Any help that can be given will be very appreciated!

  For anyone having this problem, I discovered the cause after reading a post on the forums of thegreenbutton.tv.  An application in Chrome or any browser Chrome (in my case, the Slimjet browser) is the culprit.

  For me, it was the Plex app.  He was diverting the judgment and move forward and back buttons on my remote HP WMC.  As soon as I disabled the application of Plex, the buttons started working.   Never would have guessed that this was the problem!  Hope this helps someone else who might have the same problem.  Ah, tech.  Isn't beautiful?

• Problem creating DEV_PORTAL via the remote control

  Hello
  
  I would really appreciate your help to meet slot problem:
  
  in OBIE11g when creating patterns via the remote control, all the patterns, I chose to be created are working well except DEV_PORTAL, which throws the error
  
  SQL error when connecting with thin driver (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST=HOST_NAME) (PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = SERVICE_NAME))): ORA-01017: invalid user name password login denied
  
  The problem is this role/user/password is correct, because:
  
  1 other patterns are created by using the same credentials (with SYSDBA rola)
  2. I can connect (via SQL developer) to database using the same settings and everything works
  
  I encountered a similar problem on the forum under
  
  Creating DEV_PORTAL schema for Oracle Forms
  
  but without any solution working :(
  
  Thanks in advance

  Why you install DEV_PORTAL scheme, for the installation of obiee 11g select Oracel Business Intelligence in the performance of the remote control. It will install only two MDS and BIPlatform patterns.

• The remote control comes charged out of the box or it must first charged?

  The remote control comes charged out of the box or it must first charged?

  It is usually quite busy, mine was about 85% when he arrived. It's a question about the pre purchase or you have a problem with your remote control works not.

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• For the remote controls of the Keynote?

  I want to use a remote control for a presentation in Keynote, I'll give.  It will be my first with a remote control, but which is later - should I buy a (If Yes, who?) or what is the last and the best app for me to use my iPhone as a remote control (which I prefer, a gadget to lose less!)?

  Please use a simple language with me, a digital native.

  I use my aging MacBook Pro with OSX 10.7.5, my speech is 5.1.1 and my iPhone is a 6s.

  Thank you!

  Using a method rather than another is a personal preference, my preference as a coach and lecturer working in several different locations is to use Keynote for iOS, it has built in the remote control feature:

  Tap to go to the next slide

  previous slide scanning

  Pen tool marker on the screen

  the highlighter to screen

  the iPad displays the screen of the presenter, showing the next slide and notes of the speaker of the presentation on the Mac

  

  There must be a wifi network present, you can connect; many businesses teaching institutions lock unregistered users by default

  The site Web of Keynote iOS is here: Keynote for iOS

• How to recharge the remote control for Apple TV 4

  How to recharge the remote control for Apple TV 4

  Recharge your Siri or Apple TV Remote - Support Apple Remote

• I have two Apple TV. The remote control that interferes with the other. For example, if I press stop on the distance she also those other programs. How to do this?

  I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?

  Easy.  You must associate each ATV with one of the remotes.  Each ATV is not paired and will 'listen' to any distance.

  The trick is to cover before the other ATV when matching so the two do not listen.

  Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support

  Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63

  Don't know what models you have the ATV, but the whole process is the same:

  1. choose a remote control and an ATV.  Cover the front of the another ATV.

  2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.

  3. choose the other remote, unlock the first ATV and block that you just paired.

  4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.

  5. release the first ATV and enjoy.

• 22D133B: replaced charger DVD - no play, pause, stop, etc via the remote control

  Hello

  I have a 22D1333B in for repair because it would not play the DVD. I replaced the charger DVD (part No. 75040787) and the unit will now play DVDs ok but the DVD section will not respond to the remote control.

  All other TV functions operate via the remote control without any problem. It's just the DVD section.

  I cured the last of them by exchanging the PCB on the new DVD unit with that of the old unit, but this certainly isn't the way to address this problem.

  I downloaded and installed the software on the site of Vestel and updated the software for the Toshiba site. The fault remains.

  Any help to solve this problem would be welcome.

  T.I.A.

  In my opinion the new DVD drive isn't fully compatible with the remote control (type) RC1910 that was included in the box.

  I think you should get in contact with the authorized service provider to fix this

• Re: How to reconfigure the remote control for Qosmio F50?

  Hello
  I have a Qosmio F50, which came with a standard remote control for applications like media library etc, how do I reconfigure the keys to do exactly what I want it to do?

  For example the button power on the remote control to completely stop the machine instead of standby

  Thank you
  Dan

  Hello Dan

  Why do you think something like this is possible? What is this described in s operating manuals.
  If something like this can be done, it must be described in the manuals?

  In 10 years Toshiba has offered several different notebooks with the remote, but something like this was never possible and remote control buttons were always with defined function.
  You have some really cool ideas.

• Qosmio F20-132: Question on the use of the remote control

  Hi ppl, I just read the manual of my laptop and I realized something that I didn't realize before

  I can use my remote control without using the "infrared adapter" using the USB connection, but it does not work inside the Win XP MCE, but I can use it to turn on my laptop and off and use other features, I will try in the future to use some other aplications with the remote control. I guess many of you guys realized it when you bought your laptop, but I said at the beginning when I opened the package ' what the hell? remote control... but I really need this adapter? Sherazade, that sucks.

  by the way someone is using the remote control with other applications (such as ahead nero, chis tv, or linux inside)?

  Hello

  I downloaded the manual for this unit, and according to the information of the remote control receiver is required if you want to use the MCE Remote control.

  In addition, remote controls USB only works with Win MCE and so cannot be used directly with Qosmio Player
  Additional some application programs can not supported control functions remotely.

• How can I change the batteries in the remote control Stor.E TV?

  How can I change the batteries in the remote control Stor.E TV?

  Thank you very much
  See all ;)

  Everything must be described in the manuals.
  In any case I'm happy you found out how this should be done only. ;)

• Toshiba 40RL953B has stopped responding to the remote control

  Hi all, my first post and this is a problem.
  I have a 3 years 40RL953B Toshiba tv that is not responding more to the remote and the buttons on the side, it is stuck on HDMI 2 port and works well with deviced plugged which, but I have no control of volume or something else.
  I was wondering if replacing the main Board it would heal or there at - it another way?
  The closest Toshiba repair center is 45 miles away and I don't want to spend a fortune on a 3 yr old TV that does not have the quality of great pic of anyway, but still, I don't want to just Chuck... 4
  Thanks in advance

  Hi all, I have a 40RL953B Toshiba 3 yr old 40 "Smart TV TNT HD, the problem is that he is stuck on HDMI 2 port and will not respond to the remote control or the buttons on the side. It does not work with something plugged into HDMI 2 but I have no volume control, it's ok when woking with a set-top box with no nut no good with the likes of a stick of fire from Amazon.
  What is a defect of the main card? Or y at - there a way to reset the system?
  Thanks in advance