Error checking for software update for xperia z3v

IM currently on android version 4.4.4 and I want to check for an update. When I click the system updates-> Check for software update, I get this error: "error while the DM session. I always get this error after performing a factory reset.

Any ideas?

In addition, Im under my phone only WIFI that I have not yet of SIM card.

Thank you
Collin

I had this problem reolved. For anyone who was wondering I finally found my phone activated with my SIM and the error disappeared.

Tags: Sony Phones

Similar Questions

  • After 2.2 update, error: "the Apple software update server is not found."

    Apple Software Update just updated itself to the version 2.2.  After letting the Apple Software Update 2.2 finish, I receive the error: "the Apple software update server is not found.  Check your Internet settings and try again. "The tool also pointed out"the new software is available from Apple.  I run in a typical home environment to network with a router on FIOS on Windows 10.  A virus scan was clean.

    I just uninstalled iTunes and apps and fact a relocation fee.  Once again the proposed Apple Software Update app updated to version 2.2.  After the update successfully, the error appears again: 'the Apple software update server is not found.  Check your Internet settings and try again. »

  • A handful of Questions for Xperia Z3v

    Given that my phone is a basic phone and is dying and I decided to choose Sony Xperia Z3v for a few reasons. But I also have a handful of questions so I'll just throw them all out there.

    Phone questions:

    1 I need Playstation more than remote outside the House read PS4 games?

    2. is the offer of free movies available for when I buy this phone?
    3. What are the differences between that and the regular Z3 in addition to being a GSM and CDMA on the other?

    Video game questions:

    1. I guess that connect a controller of the PS4 on the phone is easy, but it is possible to use a PS4 controller to play my Steam Moonlight streaming play?

    2. is it possible to use a 360 or Xbox controller? Also more then a PS4 or other controllers on the same device?

    3. I'll be able to stream my PS4 games or steam through my phone and then plugging it upward through the HDMI to show on my TV?

    Subsidiary questions:

    1. is there a speaker to the telephone where you can anchor and play music for him?

    @Xaessya

    Video game questions

    1. something to contact Steam in this regard.

    2. No, it's as if you try to use a DUALSHOCK with Xbox controller

    3. you can use shake to the flow of your games, if you want to connect your Z3V to your TV make sure you buy an adapter MHL, you could use Chromecast or if you have a smart you could listen to directly

    Subsidiary questions:

    There are speakers bluetooth myriad you can use

  • In the air of my ipad 2, ios 9.2.1 is not download. An error saying cannot check the software update is coming

    My current operating system ios 9.1, the latest operating system (ios 9.2) is not upgraded. A mistake is to come indicating that, "unable to verify the software update. I tried to update during the loading of the ipad, but no result. Please help me.

    HAbe you never synced to a computer?  You are able to update via iTunes on your computer? If so, try this way. Sometimes, it has fewer problems than to try to live update

  • Errors in the software update Creative Cloud

    Software update problems - U44MM1/11 Photoshop and Indesign error errors are U44M1P11.  AM new on Creative Cloud, would appreciate the help.

    Run the Creative Suite cleanup tool, let the AAM to reinstall, and then try again. Also consider downlaoding upgrades manually...

    Mylenium

  • BSOD no error checking for does not aspire VN7 - 792G

    Hello world

    I got my aspire VN7 - 792G (v17 nitro Black edition) since November 2015 and since last week, I was doing some odd BSOD bugcheck (0x000001d3) without errors. Using BlueScreenView I noticed that the error came from QCAMainx64.

    This happened last week and so I did a system restore and then updated my drivers wireless at 11.0.0.471. I've also updated my Nvidia drivers to the latest version in the case who had problems.

    I did a sfc scannow which gave rise to no error, I did a check of windows memory which gave rise to no problem and a disk check which resulted without any problem.

    The strangest thing was that the BSOD is produced especially when my laptop was being called in the upper left corner. But after a week of no BSOD they now returned at random moments.

    The first BSOD happened on cdrom.sys and netio.sys (also 0x000001d3) and then 2 other BSOD's happened (one while doing a system restore point) and the other so I just browsing youtube, which happened on the QCAMainx64 again.

    I left the Netherlands in Dubai and I left my receipt to the Netherlands, so I only have a scan of my warranty paper and ordering the product emails to prove that the laptop is mine. I was not able to repair yet because I need my laptop for work as well.

    I'll add my minidump files to this post. If anyone knows anything I might have missed or which is better I can do to avoid BSOD.

    I am running Windows 8.1. It seems that, on the acer site, that I can not download more updates to driver for windows 8.1 because they offer only win 10. And I'd rather not updated for windows 10 in all.

    Thank you for your time.

    http://www.filedropper.com/desktop_27

    Try to update the driver with this version:

    http://www.station-drivers.com/index.php?option=com_remository&Itemid=353&func=FileInfo&ID=2011&lang...

    Click Download, double-click the auto unpacking package and look for a configuration or install the file.

    Web site is 100% reliable.

    have an update on nvidia drivers too:

    http://www.GeForce.com/drivers/results/99508

  • During the installation of XP bluescreen error 'Check for viruses on your computer' and 0x0000007B error code

    All of a sudden my computer will not start and I tried to reinstall/repair the operating system.

    When you try to install the OS, when booting from the CD and before asking questions of formatting, it displays a blue screen. sayng 'Search for viruses on your computer' and finally 0x0000007B, etc...

    Thanks in advance

    If you use hard drives SATA and AHCI is enabled in the BIOS, you will need to press F6 and add SATA drivers when it says press F6.

    Otherwise, you will need to change AHCI Mode IDE in the BIOS (BUT you cannot change it back to AHCI after). Well, you can with a registry hack

    Or you need to integrate the SATA drivers, then reinstall windows

    This is what the stop error 0x0000007B means. He can not find the hard drive (if you add or integrate SATA drivers). It will crash before you get the installation / configuration screen (XP, since the XP CD doesn't have SATA or RAID drivers on that).

    And clear the virus check option in the BIOS if its permit

  • Error fatal installation software update 1.12 unlocked Treo 680

    Whenever I try to install the update of the software (using Windows XP), the process starts normally, but then is interrupted and a message regarding a fatal error.  The Treo must then be reset.  The connection of the cable should be OK, as synchronization is not a problem.

    Ok.

    Try a hard reset on the Treo and see if you can run the installation program.

    Click on the following link for the Web page of kb.palm.com for the article about reset procedures.

    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887.

    Message relates to: Palm i705

  • Displays error message when software update 9.2

    Why, it appears an error message when I want to update software 9.2?

    Well, since you do not identify the error message, it is rather difficult to answer. How about you provide the exact text of the error message, including all the numbers they appear.

  • BlackBerry 10 Error Message When software update

    Hello am new on the Support Forum of the device and wish to be helped by the following:

    day before yesterday, I tried to reset my unit to the default settings because I though I would recover some of the features that I had lost mystically on my motto this IE browser, camera and video internet applications.

    I get this error message: www.bberror.com/bb10-0015 please help I'm frustrated and don't know what should I do now?

    Hello and welcome!

    Please follow:

    KB34545

    RESOLUTION:

    Reload the OS BlackBerry 10 with KB34045

    * IMPORTANT NOTE *.

    If the operating system Blackberry 10 cannot be recharged or displays the same symptoms when the charge is complete, turn the unit on your place of purchase for service.

    To download and install the latest version of BlackBerry link, visit:

  • Error so that the update manual xperia to android sola 4

    Hello

    I did the following download and install the latest version of the Fashtool software (flashtool - 0.9.10.1 - windows) and I had installed the .exe drivers in the driver folders

    and selected all devices and I am not able to flash sola in the new version of android

    the logfile in the link

    Please help guys :'(

    problem solved... the problem is that I connect my phone to the exact time... that's all

    Thank you all

  • Help with software updates for HP Officejet Pro L7500 Series

    Five updates have been identified as available when I used 'check the software updates' Solution Center.

    All updates failed to download. The updates are:

    Update critical HP product Assistant

    Critical update for HP memories disc creator

    HP update - security update

    Updated HP 4.0.12

    Update recommended to correct a problem with the sign up now product registration page

    TDA, since these updates are not required for your system and your printer that updates could not be installed on your system, however if you want to see what updates are available, then this is the web page to select your printer model, and then select your operating system and you can see the updates you need to update for your printer :

    link to select your printer model

    Once you click on the link above, you must click your series of model and then in the next page, click on drivers and software download link to see available software for your printer.

    Hope this helps you.

  • Software update checking on iPad 2 and it keeps loading all day

    Check the software updates on the ipad2 and he kept loading. I tried hours and in the afternoon and still loading. All applications are closed.  How can I fix it?

    Heavenly salvation, if you try this live update, try to update via iTunes instead. Simply connect your iPad to your PC or Mac, open iTunes and select your iPad on the upper left corner. An update window should appear but if not on the Summary window that opens click on update.

    Before you do the above, I also propose the following, a forced reboot. Hold down the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Ignore the "Slide to power off" text if it rises. You won't lose anything. Then sign out of the iTunes Store and reconnect.

  • iPad2 does not connect to check if the software updates or download items

    iPad2 does not connect with apple to check the software updates.

    Hello

    Go to main itunes down the apple page ID sign out and then sign.

    Who can help.

    See you soon

    Brian

  • Software for updates error checking

    Software for updates error checking

    What should I do?

    There are several threads under microsoft support for update errors and also videos to youtube even try, based on the specific error you get. I had a similar experience yesterday and I had to use system restore.

    BR

Maybe you are looking for