Error code 0 xC0000001 on Asus Vivo tab Rt with RT Windows does not start

Similar Questions

• try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error.

  try to do an update and it gives me an error code 80240016 and when i run Microsoft solve this trobuleshooter it does not work and tells me an occure\red error. How can I fix it?

  Hello

  1. what patch did you try?
  2. update you are trying to install?

  Method 1:
  You can follow the steps in troubleshooting this article and check:
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:
  You can also try the steps from the link:
  Windows Update, error 80240016
  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.
  http://support.Microsoft.com/kb/957307

  Method 3:
  You can also perform a clean boot, and then try to install and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

• HP ProBook 450 G2: 8.1 for Windows does not start error 0xc000000f

  My friend laptop has developed an error on startup after use of less than a week. The error reads as follows:

  Windows could not start. A recent hardware or software change might be the cause. TI solve the problem:

  1. Insert the Setup disk and restart your computer.

  2. choose your language settings, and then click "next".

  "3 click on repair your computer."

  If you do not have your system drive contact your administrator

  File: \Boot\BCD

  Sastus: 0xc000000f

  Info: An error occurred trying to read the boot configuration data.

  My friend tells me that there is no external device attached to the laptop and it was working on Excel in time. Windows updates are being installed and the computer laptop ran out of battery and turned off. The computer is restarted, it got the error above.

  System information:

  Processor: Intel Core i5-4210U CPU @ 1.70 GHz

  Current processor speed: 1700 MHz

  Memory size: 8192MG RAM

  BIOS date: 20/09/2014

  BIOS revision: M74 worm 01.05

  I have the DVD of the operating system, but when I select to boot from it, I get error saem. I tried the driver and application recovery DVDs, but that takes me directly in restoring to factory settings menu (I get no repair option). I tried to run diagnostics in the system (quick test). It starts with the battery and after about 10 seconds returns to the previous menu. Looking at the logs, it is said that the diagnistic was canceled, but certainly not by me. I managed to run individual tests on do as the battery, processor and hard drive and they all passed.

  How can we try to repair Windows rather than recreating the image?

  If you create a USB installer or Windows 8.1, you should be able to access the recovery options advanced that you will use the Safe Mode. If you are able to boot in safe mode, then using the system recovery may very well be the answer to the question of the BCD store that appeal to you.

  Follow the instructions on the third party site to create a usb Windows 8.1 installer using a key of Windows 8.1 credits and use it to access the Windows environment.

  https://www.WinHelp.us/non-destructive-reinstall-of-Windows-8-and-8-1.html#media

• Windows does not start with error - PXE - E53: no boot file name given

  I have a PC HP P6010in at home, but for 3 days while turning on the PC, I get the error PXE - E53: no boot not received and after that the wndows file name 7 I installed does not turn. Even the advanced startup options do not come.

  Please help solve the problem.

  Thanks in advance

  Hello

  This error comes if the operating system or any boot device is not at the start of the network, where the system tries to boot from the network or Boot Rom. seems the BIOS setting is lost. To solve the problem. Enter the BIOS by pressing F10 or F1 and reach the start (on the top with the right arrow key) tab. In the Startup tab, there should be an option related to the priority of the device, select first boot as drive boot HARD settigs, and then save by pressing F10, select Yes for confirmation.

  Now a PC will reboot and hope that the windows starts.

  Good luck

• I can not open a new tab - when I restart my computer (or firefox), ctrl T does not work and the tab '+' next to the tab on my browser window does NOT open a second tab

  Firefox3.6.18, running on Windows XP (all patches from Microsoft), opens with a single tab. By clicking on the tab add '+' or by pressing CTRL T does not open a new tab, even if I open a new window. In addition, when you exit Firefox, my location of the tab is not saved.

  Please click the button solved it next to the answer that solved your problem of Firefox support, it appears when you are connected, so this thread is marked as resolved to help other users who may have this same problem.

• I turned on my computer and found this error message, windows does not start because the following file is missing or corrupt, config sys files

  I turned on the computer and this error message was the first thing I saw, and I had to spend the next half-hour reinstall windows xp. I want to know why I had to do and what can I do if this does not happen?

  Hi Lady of shadows,

  ·         What is Windows now reinstalled and perfect work?

  If so, you can see the following article for future reference.

  How do I recover from a corrupted registry that prevents Windows XP startup

• Windows does not start, an error "STOP 0xC000021A", with status0x00000000 (0 xC0000001 0x0010034C)

  Computer was working fine.  All of a sudden I get this error, an error "STOP 0xC000021A" r, with status0x00000000 (0 xC0000001 0x0010034C) when you try to start.  It goes to the blue screen and says could be due to material change or missing files windows.  Troubleshooting still try to repair windows startup goes to blue screen and shows an error \windows\system32\winload.exe status 0 x 0000001, missing or damaged. I had all the hardward checked and from what I've read, somehow this file has disappeared and now my computer will not boot. Tried all I can think about. Any ideas?

  Hi novstarzz,

  There seems to be a hardware problem, I suggest you to the manufacturer of the computer to contact for assistance on this issue.

• Windows does not start after I log in get registry error error message

  When you connect to windows after the beginning of my computeer, my screen goes blue with the STOP message error in registry.  I can boot into safe mode, but it doesn't allow me to do all the analysis or download the software to correct the problem.

  You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.

  When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.

  If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.

  If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.

• Windows Vista window does not start error 0 x 80004005 and is unable to initialize msoe.dll

  Mail window stop working last week.  At startup, I got error 0 x 80004005 then failed to initialize msoe.dll.  This can be corrected?

  Hello

  You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps mentioned below:

  Method 1:

  You can reconfigure Windows mail and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-Windows-mail-account

  Method 2:

  If the previous step fails run the System File Checker tool to troubleshoot missing or corrupted system files.  Follow the steps in the link:

  http://support.Microsoft.com/kb/929833

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  For your reference, take a look at the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• Windows does not start gives a 0xcooooo98 code file:ntoskrnl.exe and the status

  I went to microsoft update, and important updates of downloaded and my startup collapsed Windows I tried each seting I could find that it keeps telling me that a file is missing or corupted is there anything I can do to set the file

  http://www.windowsreference.com/Windows-Vista/fix-for-ntoskrnlexe-missing-or-corrupt-error-0x0000098-when-booting-up-Vista/

  Read the information above.

  We do not know what type of disc of Vista you have.

  Try these steps to do a Startup Repair:

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Generator endpoint Audioe Windows does not start; Error 0 x 80070002

  I have a windows vista laptop and after an accident, my computer has no sound. There is a red x on the volume and so I googled the problem; I tried to start the Audio endpoint builder but there is an error 0 x 80070002: the system cannot find the specified file. Can some help me? I want to know how to start Audio endpoint builder. Thanks in advance

  Hi yuzhouxiaojie,

  You can refer to the post made by EverettC, March 11, 2007 22:17, to check if this helps http://social.technet.microsoft.com/forums/en-US/itprovistaapps/thread/7479eeb1-f5ee-4df2-886b-0b2d3c2cb0f7/

  FIX IT to the http://windows.microsoft.com/en-us/windows-vista/Tips-for-fixing-common-sound-problems link also automatically run diagnostics and repairs problems with sound and audio on your computer.

  Diana
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Code 10 for TI OHCI Compliant IEEE 1394 Host Controller-reinstallation does not start Windows XP 2002 Service Pack 3

  Have reinstalled several times-software not Windows approved driver IT will not start

  How does this relate to the features of Windows Update?

• error 0xc0000225 windows does not start

  Hello everyone
  I have a sony vaio, vista edition windows Home premium and basically my computer was working fine and all of a sudden it went away, and when I restarted it, directly, he went in the windows startup repair options and not fix the problem in the automatic startup repair, I tried several times but every time that I restarted , it would show windows loading files and go directly into the startup repair options.
  After that I followed instructions online via the command prompt and type bootrec.exe, and rebuild the boot or something (sorry iam seriously technically incompetent) and now all the that I get whenever I start my compputer is a black screen saying
  "Could not start windows, a recent hardware or software change might be the cause. to solve the problem
  1. Insert your windows installation cd, and then restart your computer
  2. choose your language settings, and then click Next
  3. click on repair your computer

  except that I don't have my cd of vista so iam basically screwed, the page reads as
  file: \windows\system32\drivers\qzgvarw.sys
  situation: 0xc0000225
  Info: Failed to load because a critical windows system driver is missing or corrupt

  so I really need someone's help because I have so much my proffesional work on my hard drive and I can't reformat everything because I do not have a backup, I also have a partition on my hard drive is in any way I can transfer important files from my hardrive to my other OS?
  Please help, panic here!

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  See you soon.

  Mick Murphy - Microsoft partner

• V5-531 ACER BLUE SCREEN ERROR CODE 0 XC0000001

  Windows 8 installed complite then problm error code 0 xC0000001

  Blue screen
  Recovery
  Your PC could 't start correctly.
  Error code 0 xC0000001
  You "ll need to use recovery on your installation media tool. If you n 't have any media (such as a disc or USB device) installtion,
  Contact your system administrator or the PC manufacturer.
  Press Enter to try again
  Press F8 before boot parameters

  1 have had any changes made on the computer before the show?

  2. when exactly you get the error message?

  Method 1:

  I suggest you to follow these steps and check if it works. You must insert the Windows 8 installation media disc to perform this task:

  a. boot the disk of Windows 8 Preview Release (if you haven't done one, you can find the download of the ISO file to create a disc on page of Windows 8 . You will need to use another computer to do. Make sure that you create the disc of the version appropriate, x 86 or x 64, depending on your current operating system build).

  b. click on repair your computer.

  c. click Troubleshooting , and then selectAdvanced Options.

  d. click on auto repair.

  e. follow the onscreen instructions and complete the repair.

  Method 2:

  I suggest to insert Windows 8 Preview Release installation media and then follow these instructions:

  a. click on repair your computer.

  b. click Troubleshooting , and then selectAdvanced Options.

  c. click on command prompt and type the following commands and pressenter after each command:

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /rebuildbcd

  d. restart the computer.

  e. check if the problem persists.

• StarTech ec1pecps parallel adapter does not start, error 10

  I'm having trouble installing a parallel adapter from Startech ec1pecps on my laptop Dell inspiron 9400 running XP. I tried new drivers and the advice of the other forums, but the device driver says: "device cannot start error 10.» I received no response from Startech on it. Can anyone help?

  Hi GregSwinburne,

  ·         Have you tried to connect the unit to a different computer and check?

  The Code 10 error code is generated when the Device Manager has not enough information or the error that is upward by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  For more information, see the article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  You can also run the troubleshooter and check if it works.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Let us know if that helps.