error code 0x80070005 while performing the system restore

Similar Questions

• Impossible to install the windows update and perform the system restore

  Original title: what restore systerm causing failure/Vista

  Windows update fails with a few updates, tried to restore the back before I loaded the system machanic - fails

  Hello

  1. What is the description which are impossible to install updates?

  2. What is the message exact error do you get when you try to install updates?

  3. you get any error message while you perform the system restore?

  I suggest you to follow the steps mentioned below and check if it helps:

  Method 1: Reset components from Windows Update from the link of the suite, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2:

  If the problem persists, then try to put your computer in a clean boot state, and then try to install the update to windows.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Manually try to install updates from the Microsoft Download Center.

  a. go to the Microsoft Download site, type the number of "KB" of the update in the download search box and then click OK.

  b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

  c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

  d. When you are prompted, click open to install the update.

  Method 4: You can also try to perform the system restore , safe mode and check if the same problem occurs.

  Note: When the computer is in safe mode, System Restore does not restore points. Therefore, you can not undo a restoration you performed when the computer is in safe mode.

  Hope this information is useful.

• Getting an error code 0 x 80070005 while doing the system restore.

  * Original title: System Restore

  System Restore is not able to complete on my laptop, Windows 7. No matter what I choose, I get the error code 0x80070005 and the process is not complete restore point. I also turned off both my security programs as suggested, and it does not work. Security Essentials and MalWareBytes say there are no errors. Please notify.

  Hello

  Try using Safe Mode system restore.

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  See you soon.

• Error code: 0 x 80042302 while doing the system restore.

  Original title: I need to restore my computer, but it says restore has the error 0 x 80042302. Someone at - it help him?

  Something done all my fonts if small you can read sentence so I thought that I was just restore to a date earier. But then when I went to restore it sad it has an error and does not work. Error # is 0 x 80042302

  Thanks to all those who can help you.

  Hi JanetAitken,

  1. What is the issue with the departure of the police?

  2. you remember to make changes to the computer before this problem?

  Method 1:

  Verify if the Volume Shadow Copy Service, the System Restore Service is started and set to automatic
  a. type Services.msc into the Start Menu search box, press ENTER.
  b. make sure that the Volume Shadow Copy Service is running and set to automatic.
  c. If the State of the System Restore Service is not started, start it. Also set this to automatic if it is not.
  d. restart the computer and check.

  Method 2:

  If still face problems, and then you try to run a SFC scan to check all corrupted files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  You can also check if the FI, you can restore the system in safe mode.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Hope this information is useful.

• I received the error message: 0x0000ffff after running the system restore

  Original title: 0x0000ffff

  has run the system restore and got this error code. How should I do?

  Hello

  could a. you give the error message as well?
  b. are you try to create a system restore point or restore the computer to a previous state?

  c. Why do you try to restore the computer to a previous state?

  We can try the following methods and check.

  Method 1.
  Disable the security software and then try to run the system restore and verify.

  Method 2.

  Let us run restore the system from the command prompt and check. Follow the steps described in the article below to get there.

  Start the restore of the system from a command prompt
  http://Windows.Microsoft.com/en-us/Windows7/start-System-Restore-from-a-command-prompt

  Method 3.

  I also advise to use the boot minimum troubleshooting to find the conflicting program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  You can also consult the methods listed in the section below to learn more.

  No restore points are available when you use Windows Vista, Windows 7 or Windows Server 2008 operating system in a dual-boot with an earlier Windows operating system configuration
  http://support.Microsoft.com/kb/926185

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error code Windows Update 800700 B & System Restore 0x80071A91 error

  Cannot install critical system updates.  Download the update error 800700B.  Manually and through MS FixIt ran the command fsutil resource setautoreset to clear/clean line newspapers.  Has not fixed the problem.  Through research found related error on the system restore.  Am unable to create a restore point and 0x80071a91 error.  A run the command-line recommended by MS to address, cd /d %SystemRoot%\System32\SMI\Store\Machine
  attrib s h *.
  del *.blf
  del * .regtrans-ms

  and get an access error:
  C:\windows\system32\smi\store\machine\schema.dat{d3e605ee-4C71-11de-be3f-001d609310af}. TM.blf
  The process cannot access the file because it is being used by another process

  Any ideas?

  Currently no anit-virus software, but recently (within 2 months) not uninstalled Mcfee... I'll try to get more details from the owner about the software was previously installed Antivirus

  You don't have to bother. This is not good. :(

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "of http://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista#section_3

  After the new installation, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network and before using a USB (flash drive) or the SD card that is not brand new, or has not been freshly formattedotherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application. [1]

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  ==============
  [1] I recommend Avira AntiVir & Microsoft Security Essentials (both free) and NOD32 & Kaspersky Anti-virus (not the "suites").

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• recently performed the system restore and now I have no internet connection

  I recently had to restore my computer and after I network and sharing Center says there is no connection available. I hit troubleshoot and diagnoses say that connection 8 - avg network filter driver-0000 box card problems. also when I try to disable my avg firewall, I get an error message saying: the specific registry key does not exist. What do I do?

  It would be useful to know why he had to use the system restore... In any case.

  Download and run the appropriate AVG removal tool
  http://www.Avg.com/us-en/utilities

  Maybe it's enough for the difficulty of access to the Internet.  If there is still a problem that run at an elevated command prompt - netsh winsock reset

  Of course, make sure you reinstall AVG or another anti-malware program.

• Must system image file be in the same place, that it was created for Windows 7 to detect when you perform the system restore?

  When you restore system files and settings from a system image, the WindowsImageBackup folder must be in the location that it was created?

  -For example -.

  I create an image system on an external HARD drive, then later I want to do a restore of the system from this image, the WindowsImageBackup folder must be in the same place, it was created (in this example, the root of the external HARD disk) for Windows 7 to detect?

  Hi Keylonta,

  Yes, it should be in the same hard disk and if it is not listed in the system restore point it is not possible to locate or detect the folder "WindowsImageBackup.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• After the removal of the malware, no program shows up & not able to perform the system restore.

  original title: System Restore problem.

  I had some kind of malware, a few weeks ago.  I finally managed to get rid of it, but none of my programs, such as Excel, etc. make their appearance.  I tried to use system restore, but it does not actually perform.  I have restore dates showing, but when I try to restore it all is here.

  Let's see here:

  Method 1: How will check if the applications are located in C:\Program Files help?  Excel would not be listed in C:\Program Files anyway.

  Method 2: Which will not help as it is not this that sfc/scannow does.

  Of course, you don't want to throw a Safe Mode and the clean boot in for good measure to check if that helps?

  If you don't recognize the issue and at least have some clues how to solve, why post anything at all (except to include links to KB articles that help at all).

• Error message: the request could not be performed because of an i/o device error. (0x8007045D) while performing the backup does not back up Outlook

  Original title: Outlook backup problem

  I support my computer using an external hard drive.  "It does not backup Outlook, declaring: the request could not be performed because of an i/o device error. (0x8007045D).  What should I do?

  Hello

  1. How did you perform the backup? He used the Windows backup and restore functionality?
  2. you have any third-party backup software installed on your computer?
  3. have you done any software or hardware changes on your computer before this problem?
  
  To work on the issue, check the following link.
  
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  CHKDSK warning:
  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  See also:
  Back up your files
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-files
  http://www.Microsoft.com/athome/Setup/backupdata.aspx
  Hope the information is useful.

• Error code 002000 while playing the daily challenges of Microsoft.

  I play the daily challenges for Microsoft Solitaire, Taptiles and mahjong, with no problems, until what may kicks. Now, I play is more the daily challenge of Taptiles, I just get error code 002000. No new software has been installed AT ALL, so there cannot be any sudden conflict, and there is no problem with reading the other two. I tried to uninstall taptiles and reinstall it, but who has had no change on the situation. What is happening with it?

  Taptiles daily challenges are now working.  I just played the challenges on May 1 and may 2.

  JKM

• Unable to connect error headset/Bluetooth Headset: the pairing attempt failed in an unknown error, is the reported error code: 0x80070005

  Original title: Bluetooth headset not connecting

  I have a Plantronics 9xxBackBeat headset, and I'm trying to connect my laptop (HP Pavilion dv6000)

  However, when pairing the headset I gives me the message
  "Device pairing failed.
  Matching attempt failed in an unknown error, is the reported error code: 0x80070005
  Contact the manufacturer of your device. »
  However, there is no driver for the 9xxBackBeat headphones and when I contacted their support, I'm referred my OS manufacturer, but when I talk about Microsoft, they tell me to go to Plantronics.
  Can someone tell me please how to fix this error?
  If it is not a mistake on the side of Plantronic, and if it's not a mistake on the side of Microsoft Windows, and then what happens?

  Hello

  1. are you able to connect other devices via Bluetooth from your computer?

  2 - is this compatible with your operating system device?

  First thing I suggest you to check the manual and if this device is compatible with your operating system.

  I suggest you try the steps mentioned below and check if it helps.

  Method 1: The problems with Bluetooth devices: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-with-Bluetooth-enabled-devices

  Method 2: If the problem persists, then try to update driver:

  a. click the Start button.
  (b) in the search box type devmgmt.msc and then press ENTER.
  c. Select Bluetooth peripheral device and right click on it.
  d. now, select Update.
  e. restart your computer.

  Method 3: Also I suggest to add as peripheral to your Bluetooth computer and later check the required services running on your computer.

  Set up a Bluetooth device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-a-Bluetooth-enabled-device

  Hope this information is useful.

• Execution on the system restore error

  Hi, I have a problem with my PC and tried to do a system restore, but I get the following error when I try: "Microsoft Visual C++ Runtime Library." This application has requested the execution to terminate in an unusual way. Please contact support for the application for more information. "I have Windows Vista.  I tried to do a restore of the system Safe Mode, nothing works. Help, please. Thank you!

  Hello

  · What is the reason to perform the system restore?

  Try the methods and check them off below if it helps:

  Method 1:

  Try to restore the computer to a different date and check the results.

  Method 2:

  Download Microsoft Visual C++ 2010 redistributable and install the same.

  You can download from the link below: Package redistributable Microsoft Visual C++ 2010 (x 64): http://www.microsoft.com/downloads/en/details.aspx?FamilyID=bd512d9e-43c8-4655-81bf-9350143d5867

• Error installshield 5 and put the error code 9 48 during the installation of updates

  In the last 2 days, installshield #-5 error rises.  Error code Microsoft windows 9 48 happens when you install the update.  My computer is running Vista.  Any direction would be useful. Thank you.

  Hello

  1 did you change on your computer?

  2. when exactly you receive install shield error code?

  3 - is when you try to install a program using install shield or when you log in to Windows?

  Method 1:

  I reset the component of windows update and check.

  Reset Windows components updates default and check to see if it helps:

  http://support.Microsoft.com/kb/971058

  Method 2:

  I suggest you to see link and check.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  I also suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I also suggest you to perform the system restore and check.

  System Restore: frequently asked questions http://windows.microsoft.com/en-US/windows-vista/System-Restore-frequently-asked-questions

• After the system restore, clock is located one hour before because of DST

  Because of a logon error, I had to perform a system restore.  After the system restore has completed, I noticed that my clock is set ahead one hour (DST).  I think that TimeZones eventually applied twice to the clock.  I can put back an hour, but I rather it would be correct.  I tried to re - download the patch for the DST, but that did not help.

  Have you tried to reset the clock -

  "With the time server Sychronising Internet?

  Have you checked your area etc

  TaurArian [MVP] 2005-2010 - Update Services