Error code 0xc000000F retrieving system

Can we say what we mean because I want my daughter's laptop, but get this code and already have a toshiba dvd recover and still fail the 0xc000000f error code.

MVG

+ Message has been translated.

It could be possible that your recovery disc isn t ok.

Have you used this drive in the past? He has already worked?

Tags: Toshiba

Similar Questions

  • Pavilion 15-p047na: error code 0xc000000f on hp Pavilion 15-p047na with windows 10

    Not my finest hour. I had the machine again on 16 December, with 8.1 windows 64-bit pre-installed. I left Windows push with updates, but found he had tried to install Windows Technical Preview 10 on top of 8.1, blocking of result. With the help of hp, I managed to do a reset, but Windows 10, not 8.1 as expected.

    I was already running 10 Windows on a desktop computer, so I wasn't too worried, but he began to be unstable, with frequent messages «Windows has encountered a problem and needs to restart...» "The last time this happened, the machine restarts with a blue screen and wouldn't boot without a disk or same dban diagnosis. I can get into BIOS and other screens, but everything I try, I get an error message: «your PC needs to be repaired...» "Error code: 0xc000000f.

    What can I do now? I'd settle for any version of Windows or Linux, but nothing will load. Any help very welcome!

    Thank you
    Edward

    Hi, Edward
    Good news, I hope that all the good tracks and Yes please let me know the outcome. Good work Sir

    Kind regards
    Checkurtech

  • cannot re - install Skype? I get an error like windows error code 1601 Installer system are not accessible!

    After trying to re - install Skype, I received this message.
    Install Skype has no Code 1601
    The Windows Installer Service is unavailable.

    System Setup Windows Error code 1601 can't access.

    After trying to re - install Skype, I received this message.
    Install Skype has no Code 1601
    The Windows Installer Service is unavailable.

    System Setup Windows Error code 1601 can't access.

    Hello Mohammedllyas,

    See if this Skype information helps you with this problem:

    "error installing 1601."

    http://Forum.Skype.com/index.php?showtopic=230501

  • error code 2718 at system startup

    Original title: error code 2718

    I tried to install a HP scanjet 2200c scanner and couldn't make it work. I then uninstalled! Now, when I turn on the computer, I get an error message 2718! It is annoying and would like to know how to solve this problem!

    Hi Boltman619,

    Try these steps and check the result.
    Step 1: Re-enter the Setup engine
    a. Click Start, click Accessories and then click command prompt.
    b. at the command prompt, type the following and press ENTER after each line:
    MSIExec /Unregister
    MSIExec/regserver
    c. start the computer and check the difference.

    Step 2: If the problem continues, check if this error is associated with linked any program currently running on the computer. To do this, try the following steps:
    a. open the article: http://support.microsoft.com/kb/310353
    b. method 2, follow steps 1 and 2, and then restart the computer to see if the problem persists.
    c. If the problem does not persist in the boot, then follow step 3 and step 4 to find out which is the origin of the problem, and once you have found the culprit, uninstall the program and check the result.

    Note: Don't forget to follow the steps in the steps to configure Windows to use a Normal startup state"" section.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Dell Inspiron 1501: Error Code 10 in systems and sounds cannot be dependent on volume

    I can not turn on the volume, audio etc:-under control panel, sounds/systems, icon that appears, voice, audio, hardware, under properties it displays IDT High Definition Audio CODEC - when you are troubleshooting, it displays device cannot start Code 10 (error).

    Hi niesy60,
     
    The most common resolution to this error is to update the drivers associated with the device. To do this, follow these steps:

    a. in the device Properties dialog box, click the driver tab.

    b. click put to update driver to start the Hardware Update Wizard.

    c. follow the instructions to update the driver.

    Here is an article that could be useful for you. Try the methods listed in article for this problem.

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  • Windows Update error Code 80246008 on system running Windows 7

    Hello

    I have a problem installing the Windows updates on my system (running Windows 7).

    Windows Update tells me that I have three important updates, but when I try to download, it tells me that they do not have.

    Thanks in advance for any help you can offer.

    All the best, Greatdaytobealive

    Norton applications are notorious for not not upgrade (or uninstalling) itself. See if the following solves your problem:

    1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    2. close all open applications (that is, anything with an icon on the taskbar).

    3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

    4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

    NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

    5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

    6. do a clean install of the 2010 version of your Norton application (for example, Norton 360 2010) using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

    TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

    7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

    8 test cycle.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • 3 print spooler error code. The system cannot find the path specified

    Can't download drivers for my HP photosmart 2575 on my new windows7 machine because it says my print spooler does not work, try starting in services and it say error3, specified path not found, look under properties and there is no way, anyone has any idea?

    To save in Notepad as a reg file, after pasting the information into Notepad do the following in Notepad:

    File > save as > and select "All files" in the drop down menu to 'Save as type' and then to 'File name' enter a name and Add .reg at the end of the name (for example. spooler.reg) > save

    Go where you saved the .reg file, and then click it to add the information in the registry, and then restart the computer.

  • How can I get rid of the system DCOM 10005 error code?

    I will be working along and then I get the blue screen. In the event viewer it shows error code 10005 DCOM system and a computer error code of Service Control. This time, the # is 7026. They are different every time. But the DCOM # is always the same.

    Make sure that the Search Service is configured to start automatically in the Services Management Console (type Services.msc in the box run from the start menu).

    John

  • Error code 80073712 installing KB936330

    When I tried to install Vista Service Package 1 (KB936330) that prompted, I met the 8007312 failure code.  I followed the instructions of error Code and installed system successfully update preparation.  But, install KB936330 aren't always.  The guest said that he is a significant update.  I don't know how to overcome this problem.  A kind soul could pls help.  I also tried to restart my laptop and reinstall the System Update Readiness, then followed by the installation of Kb936330.  But the same error recurs.

    Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
    http://support.Microsoft.com/kb/957310

    As you have tried method 1, look at the methods 2 and 3

    and/or

    Reinstall the Windows Update Agent

    Information for network administrators about how to obtain the latest Windows Update Agent
    http://support.Microsoft.com/kb/946928

    TaurArian [MVP] 2005-2010 - Update Services

  • Error code install Build-12 when copying distribution

    Hello to you all, useful forum fans!

    I have problems of construction of a Setup program for my product now that I upgraded to LabVIEW 8.5.1 2010.  My project is an executable version, and then 3 built installer who put a different value in the registry that indicates the level of the executable permissions: Basic, full and complete.

    When I complete Isaiah to compile the version, I get the following error:

    CDK_Build_Invoke.VI.ProxyCaller > CDK_Build_Invoke.vi > CDK_Engine_Main.vi > IB_MSI.lvclass:Build.vi > IB_MSI.lvclass:Engine_Build.vi > NI_MDF.lvlib:MDFDistCopyList_CopyItem.vi

    Adding files to install
    Makes adding files
    Preparing to build the deployment
    Copy of the products of distributions
    Copy distribution 'Williams International - Ultimate Engine Maintenance Terminal (WI_EMT)' to: C:\CP356\WI_EMT Ultimate Installer\ to: C:\Documents and Settings\All Users\Application Data\National Instruments\MDF\ProductCache\
     
    **************
    Error: Windows SDK function returned an error. (Error code - 12)
    The system does not have the specified path.

    **************
    Error details:
    Error to the MDF API function: _MDFDistCopyList_CopyItem
    Windows as FindFirstFile function returned an error. Error code: 3
    Final report of the error
    **************
     
    Deployment of the completed building

    The weird part is the path "to leave" does not exist, but C:\CP356\ contains the files in my project (including several subdirectories).  But even if she did, I have no idea why the Ultimate version is referenced when I build the full version.  I just tried to build Setup ultimate and got the same error.

    Unknown, this error disappears if I stop wanting to include NI-VISA Runtime 5.0 in the section other installers of my Installer.  The only other "extra install" I checked is the runtime LabVIEW 2010.  The VISA duration is required for my product, so I can't just leave it unchecked.  Another clue is that installation location of execution VISA of the Source is listed as D:\, my DVD player.  But even when I put the DVD of device drivers in the drive, I get the same error during construction.

    I tried to look into the DVD device drivers, but it is said that the VISA Runtime 5.0 is already installed on my computer; I forgot the exact path that he enrolled, but I can get it again if it would help someone.  But I couldn't figure out how to change the location source for him ask to get this installer locally.

    Based on the posts that I found in this forum of error code - 12, I also created a new Build specification for the full installer and set the same options as above, in the case where something has been corrupted when I updated, but it doesn't seem to make a difference.

    I'd appreciate a lot any idea that anyone has on how to resolve or work around this problem!

    Thank you

    -Joe

    Hi jmorris,.

    Rather than reinstall the NI-VISA Run-Time, we actually want to reinstall the entire pilot. Go ahead and go into Add/Remove programs and uninstall the NI-VISA entries. Then download the installer of NI-VISA from here and install. This should update the path location in the application builder. Then try building your application to see if you get the same error.

    Paul M

  • My 3310xi is getting a 0xc05d2381 error code, which is unable to fax, print, or copy. What is the solution. Thank you

    3310xi is to get an 0xc05d2381 error code.  Ink system has failed.  Unable to copy, receive phases or printing.  See documentatiom of the printer.  Thank you for your help.   Windows XP

    Generally, these 0 x codes indicate an internal error state in the printer.  Generally, these are related to the ink system, but not always.  Your printer says ink system failure in the error message?

    Also, see the steps in the document found here to solve this error code.  Let me know how it goes.

  • Save file error codes

    Cannot back up my files on a dvd disc, guard fail with 0x80004F3 error code. My system is Windows Vista Home Premium 32-bit with service pack 1. FYI, SP2 will not install.

    Hello

    Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

    Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

    Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

    Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

    Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

    Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

    And if you have any problems:

    There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

    http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    A much better way is to back up your files to an external hard drive.

    Here's how to back up and restore your files:

    "How to back up your data.

    http://www.wintuts.com/how-to-backup-your-data

    http://www.home-PC-help.com/windowsvistabackup.html

    "How to restore your files.

    http://www.wintuts.com/how-to-restore-files

    FAQ from Microsoft about backup and restore:

    "Back up and restore: frequently asked questions.

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    See you soon.

  • I get the error code 80070005 when you download Windows updates

    Original title : I use Windows 7, Vista Home Premium on a laptop. I can't download updates and get the error code 80070005

    When you try to update, I get the error code 80070005. System: 64-bit, service pack 2, M-6880 of Gateway computer memory 4.00 GB

    Hello

    1. what day you're talking about?

    2. don't you make changes to the computer before the show?

    Please follow the steps below.

    Method 1:

    Step 1: Put the computer to boot.

    Click on the link below

    http://support.Microsoft.com/kb/929135

    NOTE: after you install the update properly, restore the computer to start as usual (see step 7 link mentioned above)

    Step 2: Download and install updates from Microsoft Download Center manually.

    a. visit the Microsoft Download Web site, type the number of "KB" in the search box and press ENTER.

    b. in the list of search results, click on the (KB) Knowledge Base article link to go to the download page. If there is more than one list, look for a link that goes to the Microsoft Download Center.

    c. If there are several versions on the download page, find the appropriate for your computer. Click on the download button and save the update to your desktop.

    d. When you are prompted, click open to install the update.

    Microsoft Download Center

    http://www.Microsoft.com/download/en/default.aspx

    Method 2:

    Run the Microsoft Fixit from the link below.

    http://support.Microsoft.com/mats/windows_update/

    Method 3:

    Reset components from Windows Update from the link below.

    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756

    How to back up and restore the registry in Windows

    http://support.Microsoft.com/kb/971058

    Method 4:

    Follow the steps from the link below.

    http://support.Microsoft.com/kb/2509997

  • Windows 8 error code: 0xc0000185.

    When I start my laptop Asus in Windows 8, it displayed the Asus logo but the logo, he says "Preparing auto repair" then it goes to a blue screen that says: "your PC needs to be repaired a required device is not connected or is not accessible." "Error code: 0xc0000185 you'll need to use the tools of recovery on your installation media" ect. also when I press F8 for the startup parameters bring me something like that ' leader: \Windows\system32\winload.efi "error Code: 0xc000000f '...» Help, please! Also, my laptop has been cut itself even when it is fully charged... I would be much appreciated if someone could help me. Thank you for your time.

    Hello Ana,

    Please keep us updated on the status of the issue.

    Windows 8 was preinstalled on your laptop?

    If Yes, then I suggest you to contact Asus support team and with the help of this serial number, they may be able to help for the product key.

    Hope this information helps.

    Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

    Thank you

  • Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

    • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

      I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

      Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

      OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

    keimanzero,

    Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
    First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
    NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

    Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
    Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

    Secondly, I suggest that you run the File Checker system while in the same clean boot state.
    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the field search programs and files .
    2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
      If you are prompted for an administrator password or a confirmation, type your password or click on continue.
    3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
      sfc/scannow

    When the analysis is complete, test to see if the problems facing the system have been resolved.

    If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

    Expert MowGreen Windows IT Pro - consumer safety

Maybe you are looking for