Error code: 0xc0000034 missing file /BCD in Windows 8

* Original title: help! Error code: file missing /BCD 0xc0000034 Windows 8!

Hello

I have a Zoo-storm and I seem to have a lack file start.

The error code is 0xc0000034 and the missing file is /BCD.

I do not know the use of this file, but it seems important to me.

I called the ZooStorm company and they said I should have a drive, but I do not have this disc.

I really don't like if I have to completely wipe the computer but I need this problem soon.

Help, please

Tyler

The link you provided above comes up with a message "page cannot be found".

I have now solved the problem by using the BCDBoot command, but it took a week of research and a lot of trail and error, while I have it might have solved the first day if the BCDBoot instructions above had been better.

Here are the BCDBoot instructions above:

1. press SHIFT + F10 when you are in the screen install Windows, elevated to the starting command prompt will now open.
2. type DISKPART command
3. Enter the command LIST VOLUME, note volume don't...
4. Enter the command SELECT VOLUME 'no' (eg1, 2, 3) mine was 3
5. Enter the command ASSIGN LETTER = Z and OUTPUT
6 enter the BCDBoot c:\Windows /s f: UEFI z: command
7. close and restart.

Here are my suggestions for improvement:

Point 3. above: the statement: "Note volume no....". "is useless, because it gives no indication of what are the criteria to use. I thought initially that files would be copied from the dvd of recovery on the c drive, so I noted the volume for drive c. In fact, the files are copied from the c drive, so the volume no note is one containing the BCD files used at startup, which is different. It is not obvious to me how to choose the correct volume. I guessed that it was volume 2 on my Dell laptop (labeled something like ESP or EPS) and which proved correct. Otherwise, it's trial and error again.

Point 5. above: it should be two lines, as there are has two separate orders to enter.

Point 6. above: I think that the two points between f and UEFI should not be there.

I hope that these suggestions are useful to other people, assuming they notice that there is a Page 2.

Tags: Windows

Similar Questions

  • The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034.

    I just bought my ASUS laptop (with no dvd player) 3 days ago. Today I turned on for the first time and was usually up to 1 hour later this bluescreen poped out: RECOVERY, your PC needs to be repaired. The boot configuration data file is missing some information required. File:\BCD error code: 0xc0000034. You will need to use the tools for restore on your installation media. If you don't have any media of the instalation (such as a disc or USB device), contact your system administrator or the PC manufacturer... As I said before that my laptop came with Windows 8, and it is not a dvd player.

    Thank you.

    Remove the power supply and remove the battery

    Press and hold the power button for 60 seconds

    Apply the AC voltage ONLY (DO NOT INSTALL THE BATTERY)

    Click on the power button and more quickly, press F9

    Follow the instructions to reset the computer to factory default

  • Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

    Hi my friend has a Samsung ativ 700 t pro (xe700T1C)

    An update came on his computer to upgrade to 8.1 windows and she accepted the update.
    When the computer has been restarted, an come blue screen error message (error Code: 0xc0000034 in Windows 8 - Boot Configuration data file necessary missing information).
    can help you with a solution?
    I have the same tablet, but I'm still on windows 8.
    see you soon

    Hello

    There is a link available now where you can upload an image from 8.1 to win without a key needed to download... You can save an ISO, create a Flash drive or burn a DVD...

    At least I save the ISO and create a flash...

    The only problem I know is you need to do this on a Win 7 machine or higher and the same 32 or 64-bit machine you make it for...

    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  • Windows 8.1 error code 0xc0000034

    Hi all

    today I turned on my Razer Blade anda blue screen came up with the following on the screen:

    Recovery
    Your PC needs to be repaired
    The Configuration of Boot data file missing some required information.
    File: \BCD
    Error code: 0xc0000034

    You will need to use the tools of recovery on your installation media. If you have any installation
    Media (such as a disc or usb device), contact your system administrator or the computer manufacturer.

    Press ESC RPF UEFI Fireware settings

    I tried to follow the steps explained here http://answers.microsoft.com/en-us/windows/forum/windows_8-system/error-code-0xc0000034-no-recovery-disk-hard-drive/32fad3a7-c498-4597-ace8-20074fcb0cf2, but an error "this product key can be used to install the final version of Windows 8.1" (I translate from Italian, so maybe the sentence in English is not this one, but it's sense). Obviously, Windows 8.1 is original, since I bought the Razer Blade in January 2014.

    What can I do? Can you help me?

    Thank you

    Chiara

    Hi Chiara,

    The file showing how to start Windows is missing. To fix it, you need your support to Windows Setup. Do you have the DVD or USB, you used to install Windows 8.1? If so, answer comes back with Yes. If this isn't the case, you can use another computer on Windows 8.1 if you have one for the media to recover your PC. To do (and it only works if you have another Windows 8 PC) follow the instructions of this link.

  • I got the error code: 0xc0000034 on my windows 8 and need help.

    I got home exhausted and started my Windows 8 desktop computer I was greeted with a screen that says The Boot Configuration data file is missing some required information. File: \BCD error Code: 0xc0000034. I don't know anything else and have no idea of what are the parameters of the UEFI firmware, help me?

    Hi Gilbert,.

    1. What is the brand and model of the computer?

    2. do you have the DVD to install Windows 8 with you?

    UEFI (Unified Extensible Firmware Interface) is a standard interface for firmware for PCs, designed to replace the BIOS (basic input/output system). This standard was created by more than 140 technology companies within the consortium UEFI, y. It is designed to improve the boundaries of interoperability and software address of the BIOS.

    You can view the following for more information Microsoft article.

    What is UEFI?

    http://Windows.Microsoft.com/en-in/Windows-8/what-UEFI

    This error occurs when one of the following conditions is true:

    • The Windows boot manager entry (Bootmgr) is not present in the Boot Configuration data (BCD) store.
    • The Boot\BCD file on the active partition is damaged or missing.

    I suggest you perform the steps mentioned by "P Jessen replied on 10 August 2013" in the material provided.

    Error code: 0xc0000034 in Windows 8 - start of the file Configuration data missing required information

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/error-code-0xc0000034-in-Windows-8-boot/15e63631-1f94-473f-83a8-8d7af48a83f7

    Hope this information helps. Response with status so that we can help you.

  • Blue Screen: Error Code C0000218(Registry File Failure) I have NO recovery disk, boot disk, etc. What can I do?

    I have a desktop HP that I installed a new hard drive on Windows XP Home Edition Service Pack 3. He has been working very well. But, the other day, I took out my DVD ROM and try it switched with different DVD - ROM, and when I restarted my computer, I got the "blue screen error Code: C0000218 (registry file failure)." The registry cannot load the HIVE (file). \System ROOT-SYSTEM 32-CONFIG-SOFTWARE or its log or alternate. It is damaged, missing, or not accessible in writing. "So, back to my main issue, I guess. How can I fiw it without any sort of disk recovery or boot disk etc... I know I could probably go buy some sort of recovery software, but can't afford it right now. Can someone help me, please?

    You have all the Norton/Symantec products installed and if so, do you know which ones and versions?

    You start with a chkdsk/r from the XP Recovery Console.

    Here's how:

    If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

    This is not the same as recovery disks that may have come to a store to purchase the system.

    You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

    The ISO bootable image file you need to download is called:

    xp_rec_con. ISO

    Download the ISO from here:

    http://www.mediafire.com/?ueyyzfymmig

    Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

    http://www.ImgBurn.com/

    Here are some instructions for ImgBurn:

    http://Forum.ImgBurn.com/index.php?showtopic=61

    It would be a good idea to test your bootable CD on a computer running.

    You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

    When you start on the CD, follow the instructions:

    Press any key to boot from CD...

    Installing Windows... going to pronounce.

    Press 'R' to enter the Recovery Console.

    Select the installation that you want to access (usually 1: C:\WINDOWS)

    You may be asked to enter the password (usually empty).

    You should be in the folder C:\WINDOWS.  It's the same as the

    C:\Windows folder that you see in Solution Explorer.

    The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

    For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

    A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

    In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

    Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

    Assuming your boot drive is C, run the following command:

    CHKDSK C: /r

    Let chkdsk finish to correct the problems, he could find.

    It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

    You must run chkdsk/r again until it finds no error to correct.

    Remove the CD, and then type "exit" to exit the RC and restart the computer.

    You have not to set the BIOS to boot the disk HARD since the CD won't be.

  • get 80071AA7 error code when you try to install windows vista sp1

    get 80071AA7 error code when you try to install windows vista sp1

    80071AA7 ERROR_FILE_IDENTITY_NOT_PERSISTENT
    The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

    (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
    How to perform a repair for Vista Installation

    All personal data will be kept. All updates applied previously will need to be reinstalled.

    (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

    3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

  • Error code: 80070020 when I do a windows update.

    I had this error before code and had to reinstall Windows Vista from the CD. What I still do? I do not have a certain update - error code 80070020. In ADDITION, the computer crashes too often - what can I do to fix this? Or what can you do?

    * Title *.
    Error code: 80070020 when I do a windows update. In addition, why my computer freezes up all the time?

    justbuself,
    Please post with the information requested here: what to post in the Windows Update forum.
    Go through this article, and then do the listed troubleshooting steps.  Post back with the results. http://support.Microsoft.com/kb/883825

    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error code 0 x 80070424. Update Windows components are configured incorrectly.

    Original title:

    Windows Update will not work. I get error code 0 x 80070424. Update Windows components are configured incorrectly. How can I fix it?

    'Windows Fix It' found update components need to be repaired!  I can't run windows updates. I get error code 0 x 80070424.  Update Windows components are configured incorrectly.  How can I fix it?

    Hello

    1. Are what 'Windows Fix It' you referring?
    2. You did changes to the computer before the show?

    Method 1:

    You can follow this link & check if the problem persists:

    Error 0 x 80070424 occurs when you use Windows Update, Microsoft Update, or Windows Firewall

    http://support.Microsoft.com/kb/968002

    Method 2:

    You can run the fixit available in the following link:

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/ )

    How to back up and restore the registry in Windows

    You can also follow this link & check if the problem persists:

    How to troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation

    I hope this helps!

  • 64 c the error code when you try to install windows update kb2505591

    Why do I 64 c error code when you try to install windows update kb2505591

    Hello

    The kb2505591 is for the download of Bing Bar 7.0.

    You can try the methods provided below to solve the problem and then try to download the update for Windows.

    Method 1:

    I suggest to reset the Windows Update components and check if that helps resolve the issue.

    http://support.Microsoft.com/kb/971058

     

    Method 2:

    Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

    If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

    http://support.Microsoft.com/kb/2505591

  • Error code 0x8007064a on the basics of window os 7security anti virus. Uninstalled norton and restart one then tried 3 times, even as an administrator to install the new program with no successTryed own care, no luck.

    Error code 0x8007064a on the basics of window os 7security anti virus. Uninstalled norton and restart one then tried 3 times, even as an administrator to install the new program with no successTryed own care, no luck.

    Norton is a utility that you can try to clean.

    Norton cleanup utility (SYMClean) .url

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Bluescreen error Code: 0Xc000007b during the installation of windows

    I am trying to install windows 8 in my new laptop Alienware. Everything seems to work fine until the installation check devices! He said that the process ran into an error of driver stack buffer overrun. The blue screen comes up saying

    "The operating system could not be loaded because the critical system driver is missing or contains errors.
    File:\WINDWS\system32\DRIVERS\stcfltn.sys
    Error code: 0Xc000007b
    You will need to use the tools of recovery on your installation media. If you don't have any facility (such as a disc or USB device) support, contact your administrator system or PC manufactrer. »
    I don't know how to solve this problem. I have tried this 3 times, ran into the same error of all time.
    Any help to resolve the issue would be greatly appreciated.
    Thanks in advance

    Thanks a lot for all the help people.

    I finally solved the problem after hours of reading the forums online.
    I just had to install the drivers using the option "Run as Administrator" and that did the trick.
    Thank you again\
    Adel
  • I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

    I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

    I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

    I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

    Product Installation status
    Product: SQL Server Database Services 2005 (MSSMLBIZ)
    (Previous) product version: 3077
    Version of the product (Final):
    Status: failed
    Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
    SQL Express features:
    Error number: 29503
    Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

    I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

    I don't know what to do next.

    Can someone help me?

    Thank you.

    Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • error code 0x8007f0f4 on security update for windows XP

    I get an error code: 0x8007f0f4 on a security update for windows XP (KB2481109) can someone help me with this?

    I need emergency assistance.

    Thank you

    Ok. I am back.

    Have you tried the manual steps in the bulletin after the correction, it did not work? Please answer.

    Start > run > type chkdsk/r > press on enter or OK > enter Y at the prompt > Reboot

    When she returns to the top, click on start > run > eventvwr.msc > press on enter or OK > go to Application, Type: Information, Source: Winlogon. Paste and copy in a txt file and then try to download and install the manual update of http://www.microsoft.com/downloads/details.aspx?FamilyID=D67E4D8C-AEB9-45E6-9555-7456C5540475

    If it fails, paste the contents of the file txt on your next reply. Also download the KB2481109.log on your SkyDrive (if you have an account here, you automatically have a SkyDrive account) public folders and add the URL of it to the next reply.

    I fear that we will have to do a replacement of manual file in the end, but let's try this first.

  • Error code 0 x 80070643 when running Windows Update

    Problem started with the loss of the Audio a few months ago, that I had fun today to study took the suggestion to update Windows. followed all the instructions, but the installation failed with error Code 0 x 682. Still no sound. Like others I downloaded Service pack 3 and then was informed I have had no audio device. Speakers don't work with laptop so no problem there. Any suggestions besides getting rid of PC.

    Thank you in advance

    Mick

    Original title: Error Code 0 x 682

    As suggested fact unfortunately error seems to be 0 x 80070643. I tried a CD on the success of Windows Media Player 9 Series withot flat. Error code displayed 0x00D11BA: cannot read the file. State ID 0x00000000. I don't think that I have a dual boot PC was changed a few years ago. Last July, 2013, I restarted the PC I lost all my music and not able to get it back.

    Any suggestions to get Audio to work?

    Mick

    Mick,

    I must apologize for my mistake here, because it seems that Microsoft error codes can include a code of three digits after the 'x '.  By coincidence, this article might also relate to your own question: http://support.microsoft.com/kb/976982/en-gb

    However, the same error code is also used when it comes to install Microsoft Security Essentials.

    The second seems a bit more complex, and I have to go back on that one.

Maybe you are looking for