Error code 10 updating the Microsoft teredo tunneling adapter driver via Device Manager

Hi, I have a hp pavillion dv6 with windows 7 64-bit edition. I saw the yellow exclamation point in Device Manager and when I try to update this driver by let me pick up the driver (it says error code 10) or research online (updated driver already installed). What should I do to remove this yellow question mark in Device Manager? Thank you.

Original title: teredo tunneling adapter microsoft

Hello Hamdullah,

Please keep us updated on the status of the issue.

Please refer to the suggestions of Mohammed Raieed said on January 16, 2010 and check if that helps.
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter/27162f78-d3b2-4A80-8166-b5596ca9fa11

I hope this information helps.

Thank you

Tags: Windows

Similar Questions

  • There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.

    I notice that I need to solve problems for my computer.  The message said: there is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be installed.  One of the options is to reinstall the driver.  I tried, but it did not.  What is this adapter, and how should I do if the error message goes away?

    There is a problem with the Microsoft Teredo Tunneling adapter driver. The driver must be reinstalled.
    The device information
    Name: Microsoft Teredo Tunneling adapter
    ID: ROOT\ * TEREDO\0000
    Error code: 10
    Reinstall the device driver
    Completed
    There is a problem with the Microsoft Teredo Tunneling adapter driver. Reinstall the driver may resolve this issue.
    Problem with the PnP devices
    Detected
    There are problems with some devices PnP. Windows will take additional steps to continue troubleshooting these devices.
    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
  • Microsoft teredo tunneling adapter driver

    On the control panel devices, I need drive device for a teredo tunneling adapter microsoft. When I left difficulty device driver, it fails.

    Hello

    ·         What exactly are you trying to do?

    ·         You will remember to do recent changes on the computer before this problem?

    If you try to update Microsoft teredo tunneling adapter driver. I suggest you follow the steps mentioned below:

    Method 1:

    You can check after uninstallation and reinstallation of the teredo tunneling adapter Microsoft and check if the problem persists. Follow these steps:

    a. click Start, type Device Manager in the Start Search box and press ENTER.

    b. click continue. The Device Manager dialog box appears.

    c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

    "d. in r to manage devices, expand click right network adapter on" teredo tunneling adapter Microsoft ", click"Uninstall"and click"OK".

    Restart your computer and Windows 7 will automatically reinstall all USB controllers.

    Method 2:

    If the previous step fails, update of teredo tunneling adapter microsoft and check if the problem persists. Follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  • How to reinstall microsoft teredo tunneling adapter driver, its showing 10 error code. pls help

    I hv hp pavilion dv6-2005ax, windows 7 32-bit, its display problem with teredo tunneling microsoft drivers, but when even after the end of troubleshooting it shows not installed driver, pls help how to install the drivers, its error code display 10.

    Hello

    Description of the error code 10:
    The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

    The cause of this error:

    One of the main causes for this is that the network adapter does not currently support this feature. You can download the latest driver / updating the driver for your network card or chipset and then try to uninstall and reinstall this component.

    I suggest you try the steps below and check if it helps

    Method 1: resolution

    a. click on start

    b. right click on computer

    c. click Properties

    d. click on Device Manager on the left hand side

    e. right click on the network card

    g. click on uninstall

    Also try to uninstall the card network programs and features

    Here are the steps to uninstall programs and features.

    a. click Start, type programs and features in the search programs and files box, and press ENTER.

    b. Click to select the product to uninstall from the list of installed products and then click Uninstall/Change in the bar that displays the available tasks.

    After you have uninstalled the network card, try to install the driver from the Microsoft Web site from the link below:

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4062&LC=en&cc=us&DLC=en&sw_lang=&product=4039727#N909

    Reference link:

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

    Update the driver

    http://support.Microsoft.com/kb/943104

    Hope this information is useful.

  • Problem with the Microsoft Teredo Tunneling adapter.

    Appears in the device as Manager: Version 6.1.7600.16385 dated from 21/06/2006

    but appears in C:\\Windows\System32\drivers\tunnel.sys (properties/details) as:

    Version 6.1.7601.17514 dated 11/20/2010

    My computer cannot find the device and I can not print online.

    I don't have the authorization to fix, and I don't know how.  Is there a fix from Microsoft for this?

    Lesax

    I suspect that the printer (if earlier) has installed an older driver. I would like to uninstall in Device Manager and then restart your computer.  Windows should install the new a correctly it is unclear if the printer (since you don't tell us what it is) will work with the new driver.

  • Microsoft Teredo Tunneling adapter - error code 10

    Former title: Microsoft Teredo Tunneling adapter

    I got an error code 10 regarding the Microsoft Teredo Tunneling card which read, "device cannot start".  I read in one of the forums that uninstall you and then restart your computer, Windows would automatically reinstall it correctly.  I did, but in Device Manager registration with network cards, it is more listed.  I wonder if it is still completely removed from my computer I really must installed there?  Everything seems to work fine with my computer.  I have Windows 7 Home Premium.

    Hello Arthur,.

    Thanks for posting your question on the forum of the Microsoft community.

    "Teredo" is a tunneling protocol designed to grant IPv6 connectivity to nodes that are located behind IPv6 NAT (network address translation) not compatible devices. It defines a way of encapsulating IPv6 packets in IPv4 UDP (User Datagram Protocol) datagrams can be routed through NAT devices, on the IPv4 internet.

    I suggest you try using the steps described in Microsoft Knowledge base article.
    Reference:
    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
    http://support.Microsoft.com/kb/943104

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
    http://Windows.Microsoft.com/en-us/Windows/back-up-registry

    See also:
    http://TechNet.Microsoft.com/en-us/network/cc917486.aspx

    I hope this information helps.

    Please let us know if you need more help.

    Thank you

  • Device cannot start. ISATAP and Microsoft Teredo Tunneling adapter card code 10.

    original title: hardware device

    Hi I have a problem with my pc in Device Manager, it is said.

    Map Microsoft ISATAP. This device cannot start. (Code 10)

    Map Microsoft ISATAP #2. This device cannot start. (Code 10)

    Microsoft Teredo Tunneling adapter. This device cannot start. (Code 10)

    I tried update driver software and when I do this it says that windows has determined the driver software for your device is up to date. So can someone give me some advice please.

    THANKS IN ADVANCE

    Hi macandy2010,

    Run the Fixit in KB 943104. This should solve the problems of Code 10.

  • Microsoft Teredo Tunneling adapter does not work.

    Original title: Microsoft Teredo Tunneling adapter

    I think I'm ready for questions on the Teredo in the forums.  I tried these "FixIt", and nothing works.  It w/b well if Microsoft had a site to find this Teredo so that we can download a 'new '.  The defective one I have on my desk is dated 2006.  Really frustrating to continue in these wild pursuits to find a 'solution' to the Teredo Tunneling adapter.

    Alice

    Hi Alice,.

    Thank you for posting your query on the Microsoft Community.

    I understand that you have a problem with Microsoft Teredo Tunneling adapter. I will help you solve the problem.

    Before we continue, we need more information to help you better.

    1. Did you change to the computer?
    2. Do you get any error messages when you try to use Microsoft Teredo Tunneling adapter?
    3. Have you installed a third-party software on your computer?

    As you have tried some troubleshooting steps, I suggest you disable third-party security software installed on your computer (if there is) temporarily and update a hardware driver that is not working properly.

    Update a hardware driver that is not working properly.

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    Turn off the Antivirus:

    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    I suggest you check suggestions provided by Nithyananda J from the following link to see if it can help solve the problem.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter-driver-download/d7efb977-b3ed-4373-A292-b6261faeb72d

    I hope the above information helps. Please let us know if you need help with Windows. We are happy to help you.

    Thank you.

  • Microsoft Teredo Tunneling adapter, can not start correctly

    When I run my health system monthly report the resource and performance monitor told me that;

    A device has a configuration problem that prevents it from starting correctly.
    Details:

    The device, Microsoft Teredo Tunneling adapter, cannot start properly. It was perhaps not the right driver installed or may be experiencing a hardware failure. The Plug and Play ID for the device is 9.

    ******************************************

    In Device Manager the driver shows up to date, but said the properties;

    This device cannot start. (Code 10)

    Since the report the resource and performance monitor says it's a plug-and-play I uninstalled it but there is nothing when you restart and I had to find and reinstall.  Of course everything that fact was put me where I started.

    How can I solve this problem?

    Hello

    Thanks for posting your query in Microsoft Community.
     
    I understand that you have problems with the installation of the Microsoft Teredo Tunneling adapter device drivers.
     
    Method 1: First of all, try to follow the steps mentioned in the link below to fix the problem.
     
    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
     
    Warning for the registry:
    Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
     
     
    I hope this helps. Otherwise, answer this answer and we will be happy to help you again.
     
    Thank you
  • Microsoft Teredo Tunneling adapter device"does not work correctly.

    Hi Sir/Madam

    Hello, can you help me find driver problems, sir.i am on hp pavilion g6 Series notebook.i found this message there, Windows reports that the "Microsoft Teredo Tunneling adapter" device is working properly. But I opened the Device Manager and I found the icon and I double click and then try to update the driver software but I found ago encountered a problem... This device does not work... Sir can you help me solve this problem... Thank you for your time

    Hi Binet1,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-2225tu issues of driver for laptop and have on the Teredo Tunneling pseudo-interface. Right click and delete all Teredo Tunneling pseudo-interface. Restart the computer. You could update driver software by right click, browse computer for driver software. Select let me pick from a list of device on my computer-> network adapter drivers > Microsoft > adapter Microsoft Teredo tunneling.  You can enable system restore by following this document.

    I'd be happy to help you if necessary because there are many models of HPNotebook, I need the model number. How can I find my model number or product number?
    Please respond with an operating system that you are running:
    Operating system Windows am I running?

    Please let me know.

    Thank you.

  • Microsoft Teredo Tunneling adapter

    Need of the Microsoft Teredo Tunneling adapter

    window 32\driver tunnel sys system

    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
    If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.
  • HP 18-n208tx: controller Bus SM and Microsoft Teredo Tunneling adapted

    I'm looking for a driver for the "SM Bus controller
    "PCI VEN_8086 & DEV_9C22 & SUBSYS_2166103C & REV_04 and"Microsoft Teredo Tunneling adapter"
    HP 15-n208tx for Windows 7 64-bit.

    Hello:

    You need this driver for smbus controller...

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=7834518&swItemId=ob_156348_1&swEnvOid=4059

    Please read this forum link for some ideas on how to deal with the Microsoft Teredo Tunneling adapter:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Microsoft-Teredo-tunneling-adapter-driver/258390f0-AC36-4A1F-b30e-55b81b9067fa?auth=1

  • Microsoft teredo Tunneling adapter's driver driver problems

    Hello you signed up for the first time and by publishing too. Ive never had problems with my laptop Acer Aspire 7540, it's a windows 7 64-bit. Recently, Ive noticed it is very often the Crackle from audio sources, mainly when researched online, not so much by using WMP. As a result, I had a quick look around my PC and found I have a "!" mark to the icon for laptop. He asserts that this Teredo Tunneling adapter driver issues. I tried following the instructions on the screen to fix this, but he came to failure and the State of "Details" that there is a "problem with PNP devices.

    I had a look on google and tried the advice to go to my network connections and sΘlectionnΘe wireless network connection, click with the right button on properties and confirmed that IPV6 (TCP/IPv6) has been activated, so I guess I can exclude that as a problem.

    There is also a connection to the local area network and Wireless Network Connection 2 listed under network connections both have red "x" next to them. I use wireless, like my mother on his Acer laptop. LAKE says "network cable Unplugged, WNC2 States 'not connected'.

    I came Acer to reinstall the driver, but when entering my S/n number or SNID happens model unrecognized. When entering ACer ASpire 7540 a list of drivers is here but nothing called Teredo.

    Would appreciate any help that anyone can give. Don't even know if this driver will fix sound problems, or if my speakers are simply disappeared (lol), but I would like to do, of course, I have all work as good as possible.

    Thanks again

    Stem

    The Microsoft Teredo Tunneling adapter isn't a default device you see in Device Manager.

    Something else has created a problem on the system.

    You can visit this thread on the forums of Microsoft:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/Microsoft-Teredo-tunneling-adaptor...

  • Microsoft Teredo Tunneling adapter cannot start error code 10.

    Can someone please?

    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
  • Microsoft Teredo Tunneling adapter doesn't have a Code 10.

    Separated from this thread.

    Microsoft Teredo Tunneling adapter doesn't have a Code 10. How can I install the automatic fix being unable to install it

    It is a known problem if you have Zone alarm installed.  If you have installed remove it at least to check

    To disable Teredo tunneling 6to4 interface open an elevated command prompt and type

    netsh interface set terredo disabled state.
    To re - install
    1. Click on start.
    2. Type Device Manager in the start search box, and then open it.
    3. Click the Action tab on top and click Add legacy hardware
      then click next and next again, he will then scan and find nothing then click on the screen after that.
      Wait a minute and you will see a list of devices appear, scroll and select network adapters and click Next, then in the left column choose Microsoft then in the right hand column scroll down and choose Microsoft Teredo Tunneling adapter, and then click Next and it will install it.
      To check simply do as it is set to show hidden devices right click on the Device Manager right click view, then show hidden devices.
    If there is no option "Add Hardware inherited", you need to connect the unit using the tunneling.

Maybe you are looking for

  • HP ENVY Phoenix Desktop - 850: missing WLAN driver

    Hello I can't find the driver for the wireless network adapter.  It is not listed on the page for the driver for my model. HW PCI ID: PCI VEN_8086 & DEV_095A & SUBSYS_50108086 & REV_61 Please answer with driver DL link. Thank you Dave

  • email received asking my account information, is this true?

    I received an email from the windows live team. Hello. I recenly received an email indicating that within 2 weeks my account on hotmail will be banned unless I have click on answer, and enter my account information... I didn't think it was safe to se

  • Switching from paid free with in-app purchases

    I have the application existing PlayBook that paying using a model. For various reasons I intend to move to a Freemium model with in-app purchases (where users buy app premium features as they need). The switch would happen once PlayBook improved OS,

  • WINDOWS 8 IS COMPATIBLE WITH ALL MOTHERBOARDS

    Hello I use Windows 7 Ultimate and was very disappointed to learn Microsoft hadn't given everything about information Hardware Compatibility mode of return in October 2012 to January 2013 I've seen people try upgrade and wasting earned money when I a

  • How we can stop to generate multi invoice to receive a delivery ID?

    Hello Experts,How we can stop to generate multi invoice to receive a delivery ID?