Error code 1000-0146

Similar Questions

• Error code 1000-0146: Start "DST Short test": failure

  Hello

  As of today, I am unable to boot Windows 7. Just after the Windows flag logo, I get a BSOD with error: unmountable_boot_volume. When I run diagnostics I get the error mentioned in the title.

  I tried several things, including the repair of Windows 7, diskpart, chkdsk and sfc scannow in the cd installation cmd prompt and change the BIOS settings. Unfortunately, none of these things worked.

  To elaborate a little bit on the things I've tried: I tried to repair Windows from the installation cd as well as the 'normal' (one of the two options, that you can get when something going wrong and you reinstall your system). In the first case the system shows a blue background hanging and in this case, I get a black background of hanging. The diskpart command displays only the first three lines, i.e. it does not show DISKPART > allows to provide other commands. The chkdsk does nothing and reports that the drive is write-protected. The EFC control signals that the repair is ongoing (no doubt because the installation disk is running) and ask you to restart your PC (which doesn't help). I also played around with a few startup settings, including the priorities of boot.

  I strongly suspect that the drive is failing and I need to recover the data and replace the drive. However, I would like to be sure before I undertake these actions 100%. I hope someone can help out me... Thank you!

  benodinot

  Error 0146 indicates a failing or hard drive or a disk bad sector.   Basically, this means that your hard drive needs to be replaced.

  Bev.

• Error code: 2000-0146 (laptop hung on "Installation screen Windows updates")

  OK, so I have every time I turn on my computer dell laptop (I have windows vista) it acts like it is to install the updates of windows. He said same facility 3/3 even though the completion bar shows 0%. She does this, is like its about to restart then passes to the installation screen.  I ran the diagnostic test and the error code 2000-0146 came. I'm not sure if this is useful, but if anyone has a solution please help! Thank you

  Oh and I tried to restore the option and he did nothing.

  Hi cgardne5,
   
  1. How did you restore the computer?
   
  Try these steps and check the result.
  Step 1: The repair of the boot with Vista DVD
  a. Insert the Windows DVD.
  b. restart your computer.
  c. let the computer restart (boot) from the DVD.
  d. If you are prompted, press a key to continue.
  e. When you reach the screen install Windows, select your preferences in the language to install, time and currency format and keyboard or input method boxes, and then click Next.
  f. do not click install now. Instead, click on repair your computer. The System Recovery Options dialog box appears.
  g. make sure that the appropriate operating system is selected, and then click Next.
  h. After you click Next, the System Recovery Options menu appears.
  i. click on startup repair. Once the Startup Repair tool is completed, click Finish to restart the computer.
  j. remove the DVD and restart the computer to see if the system boots fine.
   
  See Repairs to the system of Windows recovery environment
  Step 2: If you do not have the Vista DVD, start the computer in safe mode and restore the computer
  See Start your computer in safe mode
  See System Restore
  NOTE: You can also choose the system restore on the system recovery options.
   
  Kind regards
  Syed - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error code 2000-0146

  Hello

  I get the error code 2000-0146 found no operating system, I'm on Windows Vista on a Dell inspiron 1545.

  Tried to boot from the CD I can do a disk check but it go than even if loading step and then the green light flowing (as knight rider because..... kit) while he just sits on a gray screen... Any ideas anyone... youn think it's disk hard totally kaput, or maybe something else... I read on the site that someone changed its ram as 1 was defective and it worked.

  Thanks in advance

  Chris.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  @@@@@@@@@@@@@@@@@@@@

  This program may also interest you.

  "TestDisk, data recovery.

  http://www.CGSecurity.org/wiki/TestDisk

  TestDisk can run under

  • BACK (either real or Windows 9 x box BACK),
  • Windows (NT4, 2000, XP, 2003, Vista, 2008, Windows 7 (x 86 & x 64) Windows, 10)

  @@@@@@@@@@@@@@@@@@@@

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  "How to use Knoppix.

  http://Lifehacker.com/192982/geek-to-live--rescue-files-with-a-boot-CD

  @@@@@@@@@@@@@@@@@@@@

  "Recover files from Windows using Puppy Linux disks"

  https://www.WinHelp.us/recover-files-using-Puppy-Linux.html

  See you soon.

• Error code 2000-0146 and 0F00:065 D and B 0F00:137

  I have a Dell Studio 1735 laptop.  Today it froze on me.  I could only make a hard stop.  I tried to log in again and got on the desktop with icons, but couldn't go further.  Don't have hard stop yet and I tried to go back to the top.  I made a kind of diagnostic tests and received the error code 2000-0146 following.  Also received the 0F00:065 D error reading DISK_0-self-test and 0F00:137 B DVDRW_1-disk is missing Virgin insert the data disc (example of the RCD).  I don't know what all these means.  Can someone direct me if it can be repaired and how I can fix it.  Or do I need a new hard drive.  Your help is greatly appreciated.  I use another laptop to write this message.

  The first two messages mean that the hard drive has failed. The third says there is no disc in the DVD drive, so it could not be tested.

• Received error BSOD, ran Diagnostics, got the error code 2000-0146, tried to boot from different HARD drive, got the same stop error message

  So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?

  No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.

  Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately.  Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad.  Replace it.

• Error code 2000-0146, 0141

  2000-0146, 2000-0141 error code.  He cannot get the computer to go to safe mode. Computer turns on, dell appears and then darkens.  Any help is greatly appreciated.

  When I turn on the computer, I can go to F2 or F12.  When I hit F8 a list appears, but any item I select the screen goes black and then after 2-3 minutes it says failed to start.  Try F1 to reboot, F2, to go to the configuration and F5 to run Diagnostics.  If you run them diagnoses get error codes.

  These are mistakes of automatic drive test. You will probably need to replace the hard drive.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&CS=19&l=en&s=DHS&docid=DSN_126A722713F6D0D0E0401E0A55174AE6&isLegacy=true

• I got an error code 2000-0146... Anyone know what this means?

  I have a Dell Inspiron 1500 series laptop PC... I just ran diagnosis because I can't type or anything on this subject. In fact when the battery is in it, it will not even turn on... but has worked with the new battery for a month. I need help. I have a PP presentation due Thursday!

  Keri

  Hi Keri M.

  (1) what is you receive the exact error message?

  (2) when exactly you get this error message?

  It seems that this is a hardware problem; You can see the steps on the Dell Web site.
  Dell link

  Dell Support link

  Contact Dell for more expert help
  http://support.Dell.com/support/index.aspx?c=us&CS=19&l=en&s=DHS& ~ CK = mn

• Cloud creation will not updage error code 1000

  I need help with this problem please

  [Left non-technical Forum Lounge for cloud... forum] MOD]

  Visit this link

  Error "Unable to install" received when installing Adobe Creative Cloud desktop application

• Office of cloud creation "doesn't not update (error code 1000) - on Mac»

  For awhile, I couldn't update my creative cloud application.

  I use a mac [El Capitan OS X 10.11.3 (15 d 21)].

  It's very exasperating.

  Help, please!

  uninstall your cc app (you must first uninstall your programs cc).

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  reinstall your cc on a drive off network app.

• I get an error code 0146 and or the image of exe.bad the logon user interface

  I can't reboot my computer, I keep the error code and get or bad image. I have almost everything and I keep getting the black screen reads LogonUIexe.bad image and when I do the test I get an error code 2000 - 0146.help.

  Hello

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Try to start the computer in safe mode and check if the same problem occurs:
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try to perform the verification and startup repair if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• D600-1000-0142 error code

  Help! Windows used to run... Well it takes an hour to load, use about 4 colors and crashes when I ask him to do anything!

  Found that DSI short status test and got an error code 1000-0142 with a message... Unit4 test: Drive has failed. Status byte = 89
  tried to run Dell PC Restore by Symantec to restore the default settings, you press the ctrl and F11 keys when the dell splash screen appeared, but nothing seemed to happen
  I have no disks I thought that all software has been pre-loaded, my laptop is flea market.
  Help, please
  Thank you

  
  

• Office creative cloud 1000 error code.

  I tried to install CC desktop downloader and get the error code 1000.  Any help is appreciated!

  Run the vacuum cleaner by, http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

• Error code 2000-0145 on SSD

  I have a brand new DELL Optiplex 9010 AIO and had problems with the SSD (Adata 512 GB).
   
  The problem started with a blue screen of death (BSOD) in Windows 7. After that each new start results in a BSOD. I tried with a new installation, but it also results in a BSOD when installing. I've upgraded to the latest version of the bios A09. The hard drive Diagnostics returns the error code 2000-0145. Try the hard drive in the results on another computer in the same code error when you run the diagnostic tests. Execution of diagnosis with a new hard drive in the computer works well, but when you pass on the original SSD drive the same error recurs.
   
  What means error code 2000-0146 means? Any ideas?
   
  Thanks in advance,
   
  Bug

  2000-0145 has to do with a rotation test.  Dell actually had a stroke of genius to design a diagnosis that has identified problems hard spin-up and test the integrity of a player.  An SSD does not have an engine and cannot return a response appropriate for this part of the test, immediately throws an error.  It is not a standard for one SSD to answer with a bypass for a test like this, since it is an exclusive test.  Some SSD cannot report this error, while other models will be.

  I had to do a lot of digging for it and tried several SSD to see how this error code is displayed.  Again, he would have them all, but he has been consistent among all readers of specific models.  Was a huge headache 2 months & nightmare for me.  SSD so now I'll try other software, or other system to check the integrity of an SSD before calling the bad disk.  A unique model of SSD, this has produced on several readers was the OCZ Vertex SATA III 4.  Fact on all sizes we tested: 128, 256, 512.  Down them on a version customized with various diagnostic tools: discs had no problem.  Many are still in production several months after running the tests.

• Diagnostic test returns with this error: 1000-0146.

  Original title: 1000-0146

  ran diagnostic test and error code from 1000-0146 everything works ok

  Why do you think that will help a clean boot?

  It is a pre-boot diagnostic assessment Dell computer error code you can read here:

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&docid=266787&doclang=en&l=en&s=Gen&cs=

  I think it means that the hard drive may be failing.  How will a start clean and check correct this?

  It seems that these companies will show anything to get a link to an article here somehow - even if it makes no sense.

  If forums MS Answers would invite some information about the system, when a new question is asked, maybe... just maybe we would not have these answers.