error code 101-752 by the heroes of kodak 9.1 for windows xp

Similar Questions

• Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Error code 101-752 dotnet framework error, problems to load the new software of the printer

  Hello

  (1) have you made changes before the start of this issue?

  (2) when you get the error message?

  (3) is the specific question of the installation of the printer software?

  (4) what is the brand and model of the printer?

  It seems that you need to fix .net Framework installed on the computer. Follow this link and see if it helps.

  Fix the .net Framework installation

  http://support.Microsoft.com/kb/976982/en-us

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  See also:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if that helps.

• Parsing of wrapped data error (error Code: 101): can not decrypt request

  When my player pray http:// < Server >: 8080/flashaccessserver / < tenant > / flashaccess/license/v1 following happen:

  -HTTP 500 is returned

  -in the diary file, an ERROR is added, copied below:

  [#: 10] 2011-01-14 12:19:37, 381 DEBUG [[Partition (flashaccessserver)].com.adobe.flashaccess.server.license.engine.LicenseEngine] Started processing the request...

  [#: 10] 2011-01-14 12:19:37, ERROR 385 [. com.adobe.flashaccess.server.license.engine.LicenseEngine [Partition (flashaccessserver)]]

  Error processing request for license acquisition

  com.adobe.flashaccess.sdk.protocol.HandlerParsingException: com.adobe.flashaccess.core.pkcs7.PKCS7Exception: analysis of wrapped data error (error Code: 101):

  Cannot decrypt request

  at com.adobe.flashaccess.sdk.protocol.AbstractHandler.parseRequest(AbstractHandler.java:73)

  at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest (LicenseEngine.java:193)

  at com.adobe.flashaccess.server.license.engine.LicenseEngine.parseRequest (LicenseEngine.java:63)

  at com.adobe.flashaccess.server.generic.engine.AbstractEngine.processLicenseRequest (Engine.java:70 abstract)

  to com.adobe.flashaccess.server.license.servlet.LicenseEngineDelegatorServlet.doPost (license EngineDelegatorServlet.java:53)

  etc...

  The validator says that the config is ok, but I can't get this url/license/v1 to work.

  Can you help me?

  Thank you!

  Hello

  Debian is not a distribution of Linux support; only RedHat 5.7 ES.

  The native encryption library provided with the license for protected streaming server does not seem compatible with this particular distribution.  Another option, you might have would be to use the native crypto library (slower performance) to solve the "UnsatisfiedLinkError' in your newspapers.  Please take a look at this thread for how to do it: http://forums.adobe.com/thread/775306?tstart=0

  see you soon,

  / Eric.

• Error code Win32 returned by the print processor: 2147500037. Unspecified error

  I see that this error code has been resolved.   I have a few questions on this topic tho.  Loop here, is where the fun begins.  If i see this exact problem in my hosted cloud envorioment.  The printers are installed locally and are drawn on the network when the user logs in the hosted environment. The user connecting to a full desktop, which is a Windows 2008 R2 server server.  They only receive this problem when printing via the cloud. that uses the same printer drivers installed on the local PC.  On-site printing has the success rate of 100%.

  Here are the mistakes I see:

  Https://rem.exactbid.com/ServiceRequest/SRFsmart/srprintable.as, belonged to craig_REM, document failed to print on printer HP LaserJet P2050 Series PCL6 (from CRAIG) in session 18. Try printing the document again, or restart the print spooler.

  Data type: NT EMF 1,008. Spool file size in bytes: 589824. Number of bytes printed: 540384. Total number of pages in the document: 2. number of pages printed: 0. Client computer: \\VS-XA35. Error code Win32 returned by the print processor: 2147500037. Unspecified error

  Where I am confused, is that I have no driver installed on the server.  they are all drawn in front of the user login local machine solange.  With printing works fine locally.  Uninstalling the drivers will make them any good?  or where should I be looking next?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Serverforum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Windows 7 - error Code: 646 (cannot install the Office updates)

  A security update for Microsoft Office InfoPath 2007, Powerpoint 2007 and 2007 Office system. Can not update.

  lokz,

  A KB was created for 646 error code that appears during the installation of the updates of Microsoft Office. The KB includes an automatedMicrosoft fix 50461 that corrects the problem. Look at the following KB:http://support.microsoft.com/kb/2258121>

  Please let us know if that helps.

• Vista - Error Code: 80240016 (cannot install the update for my mouse)

  error code 80240016: updated of the mouse, I can't seem to install correctly under windows vista, HP dv9727cl laptop.
  Help please. Thank you.

  Synaptics PS/2 PORTtouchpad

  0 X 80240016 WU_E_INSTALL_NOT_ALLOWED

  Tried to install so that another installation is in progress or the system has been

  in the meantime a mandatory reboot.

  and/or

  http://support.Microsoft.com/kb/957307

  Error message when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site: "0 x 80240016.

  Windows Vista and Windows Server 2008

  Follow these steps:

  1. Close the browser Windows Update or Microsoft Update Windows.
  2. Click Start, type command prompt, in the list of results, right-clickguest, and then clickrun as administrator.
     If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3. Type the following commands. Press ENTER after each command:
     net stop wuauserv
     net start wuauserv
  4. Close the command prompt window.
  5. Try to install updates again.

  TaurArian [MVP] 2005-2010 - Update Services

• Update of MS by giving the 0x8024402C error code when upgrading to the new MS update schema

  I use a completely updated version of XP Professional.  I run an independent firewall

  Update MS used to work until he told me I had to go to the new version.

  Currently I get the 0x8024402C error code.

  I used the program of fixit MS for update problems. Whenever he claimed to correct the error. But it did not work.

  I followed the correction suggested to clear the exceptions lan then use the cmd line to stop and restart the update service. did not work.

  Fix used who said lan value automatic dectet, and received the 0x80072EFD error. Put lan affecting original return and went back to the original error code.  Any other ideas?

  Hi robertTrinitie TCh.,.

  Thanks for posting in the Microsoft Community.

  I understand that you cannot install the update of windows, and you receive the 0x8024402C error message

  I suggest you to see link and check.

  0x8024402C error code when you try to install updates on Microsoft Update or Windows Update Web sites

  http://support.Microsoft.com/kb/900936

  See also:

  Try to reset the Windows Update components

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 how to back up and restore the registry in Windows

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  See also:

  You may receive an error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site

  http://support.Microsoft.com/kb/883821

• XP Pro printing error "client machine: \\TOOLSHED.» Error code Win32 returned by the print processor: 53 (0x35). "

  I have two PCs connected to a "2wire gateway" I got ATT.  I can read and write files to write to the network, but I can't print from the remote computer or client.

  Hi KennethBurns,
   
  -Are you connected to any network domain? If so, contact the system administrator to solve this problem.
   
  Here's a similar post on this issue. Follow the suggestion given by "Afzal Taher - Support Engineer" to solve this problem:
   
  Error code Win32 returned by the print processor: 2147500037. Error__ not specified
   
  Note: The suggestion given in the link is applicable for the Windows XP operating system.

• error code 39 cannot load the device driver, cannot load microsoft kernel drm adio Descrambler

  I have no sound, no audio output device installed is the message on the speaker icon.
  Open the Device Manager, I get the error code as indicated in the title. My audio is Realtek ALC888 HD audio

  Dear anyone, I had the same problem. One day, my sound card / audio just stopped. X red on the sound icon. My CD/DVD worked fine but no sound. I uninstalled the sound card, updated drivers... everything I could find... nothing worked. I run only Vista 32 bit with a Realtek AC 97 integrated sound. Looked on the forums and read and I tried for weeks hoping to not have to reformat. Finally, I got in the registry and lucky. Here's what I did: Device Manager: uninstalled all the sound stuff. I kept getting this: Microsoft Kernel DRM Audio Descramber Microsoft Streaming Clock Proxy Microsoft responsible for quality Proxy Microsoft Service Proxy Microsoft Tee/receiver-to-Sink Converter Realteck AC 97 I uninstalled all that sort of thing. Then to regedit and see below Regedit navigate to: HKeyLocalMachine\System\CurrentControlSet\Control\Class {4D36E96C-E325-11CE-BFC1-08002BE10318} ON RITE PANE... I deleted: for FILTERS LOW Dword value (Mine was something that read like LVUSB or some such), I restarted and did not leave Windows Installer automatically... don't leave... it will give you everything _ mentioned above. I reinstalled my sound of a pack of Realtek for Vista. Lo and behold... sound is back. Vista still hate the pilot but did before cuz Vista sucks... but it works like any other so... screw it! I am happy. Hope this works for you. chatilingus

• I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem. Help, please

  I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem.  Help, please

  1. Windows Mail.  But he argued that email account for more than a year without problem.

  2 here is the full error message:

  "Are subject: how pumpkin pies are made ', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC19.

  ("How pumpkin pies are doing it" the subject of an email I tried to answer to and it does not work)

  I get another message when sending email: "your POP2 server has not responded in 60 seconds.  You want to wait 60 seconds for the server to respond? »

  And I'm waiting for 60 seconds, several times and it does not send

  It was 1 year there, not more. Not sure when it started.
  Read this article from Microsoft Help Support &:

  http://support.Microsoft.com/default.aspx/KB/926374

  t-4-2

• Error code: 0 x 80070035 the network path was not found.

  Hi all

  I have 2 systems. In one system, I installed Windows XP Pro SP2 and in another machine I installed Windows Vista Home Basic Edition. The two systems are networked. I am able to access and view the shared folder in Vista the XP system. But when I am trying to access folders in XP since Vista I get the below error:
  Windows cannot access \\hyd02
  Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.
  Error code: 0 x 80070035 the network path was not found.
  
  
  I did the settings below:
  (1) file and printer sharing are enabled in both systems.
  (2) firewall is disabled in the systems.
  (3) in the center of security and network, the network is private.
  and network discovery is enabled, file sharing is enabled, public folder sharing is turned on, printer sharing are enabled and protected by password sharing is
  Off, media sharing turned OFF.
  (4) the name of the task force in both the system is the same.
  Can someone help me solve this error...
  Thank you
  Sylvie G

  Hi Sylvie G

  Thanks for posting on Microsoft Answers.

  Are the same username and password on both systems?
  What is the share name you are trying to do on the XP machine?
  Let's say that the share name is music, you would get to it by typing \\hyd02\music

  Can you do a Test PING since the Vista PC on the XP PC?
  Go to a command prompt and type ping followed by the IP address of the computer XP

  Please post back the results... Thank you Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code 525 appeared during the installation of windows update

  error code 525 appeared during the installation of windows update.

  I m using windows vista 32 bit

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• When you try to access an external drive shared by MAC from Windows, I get an error Code: 0 x 80070035 - the network path was not found

  Original title:

  I'm unable to access an external drive that I have connected to a mac on my home network.  I can access all the files on the mac itself, but when I try to connect to the external drive, windows 7 gives the error Code: 0 x 80070035 - the network path was not found.  The external drive is set to share on the Mac, but Windows 7 always gives me error.

  Hi Comicsancturn,

  Follow the troubleshooting steps in this thread to solve the error 0 x 80070035.

  Let us know if that helps.

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• Windows 7 network drive mapping error: "error code: 0 x 80070035 the network path was not found."

  I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found

  I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista).  However, the Windows 7 machine continues to report the error.

  I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).

  The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.

  I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.

  The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?

  SOLUTION

  It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.

  There is a simple workaround solution.  Use the IP address of the target computer, not the computer name.

  (1) find IP address that the computer target is.  It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change.  Use the local windows help when you sit in front of the target computer to do this, if you don't know how.

  (2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter

  If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials.  Enter the same username and password used to log on the target computer when you're sitting in front of it.

  The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name.  You can access his actions as if it was listed by name instead of the number.

  That's all.